When the FW tells the driver to retry the INSTALL_UPDATE command after
it has cleared the NVM area, the driver is not clearing the previously
used ALLOWED_TO_DEFRAG flag. As a result the FW tries to defrag the NVM
area a second time in a loop and can fail the request.

Fixes: 1432c3f6 ("bnxt_en: Retry installing FW package under NO_SPACE error condition.")
Signed-off-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts
used by the RDMA driver correctly when the RDMA driver is freeing the
MSIX vectors.  It assumes that if the RDMA driver is registered, the
additional stats contexts will be needed.  This is not true when the
RDMA driver is about to unregister and frees the MSIX vectors.

This slight error leads to over accouting of the stats contexts needed
after the RDMA driver has unloaded.  This will cause some firmware
warning and error messages in dmesg during subsequent config. changes
or ifdown/ifup.

Fix it by properly accouting for extra stats contexts only if the
RDMA driver is registered and MSIX vectors have been successfully
requested.

Fixes: c027c6b4 ("bnxt_en: get rid of num_stat_ctxs variable")
Reviewed-by: NYongping Zhang <yongping.zhang@broadcom.com>
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

TQM rings are hardware resources that require host context memory
managed by the driver.  The driver supports up to 9 TQM rings and
the number of rings to use is requested by firmware during run-time.
Cap this number to the maximum supported to prevent accessing beyond
the array.  Future firmware may request more than 9 TQM rings.  Define
macros to remove the magic number 9 from the C code.

Fixes: ac3158cb ("bnxt_en: Allocate TQM ring context memory according to fw specification.")
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

A recent change skips sending firmware messages to the firmware when
pci_channel_offline() is true during fatal AER error.  To make this
complete, we need to move the re-initialization sequence to
bnxt_io_resume(), otherwise the firmware messages to re-initialize
will all be skipped.  In any case, it is more correct to re-initialize
in bnxt_io_resume().

Also, fix the reverse x-mas tree format when defining variables
in bnxt_io_slot_reset().

Fixes: b340dc68 ("bnxt_en: Avoid sending firmware messages when AER error is detected.")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The current scheme allocates a DMA buffer as big as the requested
firmware package file and DMAs the contents to firmware in one
operation.  The buffer size can be several hundred kilo bytes and
the driver may not be able to allocate the memory.  This will cause
firmware upgrade to fail.

Improve the scheme by using smaller DMA blocks and calling firmware to
DMA each block in a batch mode.  Older firmware can cause excessive
NVRAM erases if the block size is too small so we try to allocate a
256K buffer to begin with and size it down successively if we cannot
allocate the memory.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In bnxt_flash_package_from_fw_obj(), if firmware returns the NO_SPACE
error, call __bnxt_flash_nvram() to create the UPDATE directory and
then loop back and retry one more time.

Since the first try may fail, we use the silent version to send the
firmware commands.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

On NICs with a smaller NVRAM, FW installation may fail after multiple
updates due to fragmentation.  The driver can retry when FW returns
a special error code.  To faciliate the retry, we restructure the
logic that performs the flashing in a loop.  The actual retry logic
will be added in the next patch.
Signed-off-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This function will be modified in the next patch to retry flashing
the firmware in a loop.  To facilate that, we rearrange the code so
that the steps that only need to be done once before the loop will be
moved to the top of the function.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Refactor bnxt_flash_nvram() into __bnxt_flash_nvram() that takes an
additional dir_item_len parameter.  The new function will be used
in subsequent patches with the dir_item_len parameter set to create
the UPDATE directory during flashing.
Signed-off-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Add napi_id to the xdp_rxq_info structure, and make sure the XDP
socket pick up the napi_id in the Rx path. The napi_id is used to find
the corresponding NAPI structure for socket busy polling.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NTariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com

linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.

Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.

Fix all the places which made use of this implicit include.
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NShannon Nelson <snelson@pensando.io>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Jump to init_err_release to cleanup.  bnxt_unmap_bars() will also be
called but it will do nothing if the BARs are not mapped yet.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1605858271-8209-1-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Link: https://lore.kernel.org/r/1605792621-6268-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: c213eae8 ("bnxt_en: Improve VF/PF link change logic.")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Link: https://lore.kernel.org/r/1605701851-20270-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When performing a flash update via devlink, device drivers may inform
user space of status updates via
devlink_flash_update_(begin|end|timeout|status)_notify functions.

It is expected that drivers do not send any status notifications unless
they send a begin and end message. If a driver sends a status
notification without sending the appropriate end notification upon
finishing (regardless of success or failure), the current implementation
of the devlink userspace program can get stuck endlessly waiting for the
end notification that will never come.

The current ice driver implementation may send such a status message
without the appropriate end notification in rare cases.

Fixing the ice driver is relatively simple: we just need to send the
begin_notify at the start of the function and always send an end_notify
no matter how the function exits.

Rather than assuming driver authors will always get this right in the
future, lets just fix the API so that it is not possible to get wrong.
Make devlink_flash_update_begin_notify and
devlink_flash_update_end_notify static, and call them in devlink.c core
code. Always send the begin_notify just before calling the driver's
flash_update routine. Always send the end_notify just after the routine
returns regardless of success or failure.

Doing this makes the status notification easier to use from the driver,
as it no longer needs to worry about catching failures and cleaning up
by calling devlink_flash_update_end_notify. It is now no longer possible
to do the wrong thing in this regard. We also save a couple of lines of
code in each driver.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Acked-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

All drivers which implement the devlink flash update support, with the
exception of netdevsim, use either request_firmware or
request_firmware_direct to locate the firmware file. Rather than having
each driver do this separately as part of its .flash_update
implementation, perform the request_firmware within net/core/devlink.c

Replace the file_name parameter in the struct devlink_flash_update_params
with a pointer to the fw object.

Use request_firmware rather than request_firmware_direct. Although most
Linux distributions today do not have the fallback mechanism
implemented, only about half the drivers used the _direct request, as
compared to the generic request_firmware. In the event that
a distribution does support the fallback mechanism, the devlink flash
update ought to be able to use it to provide the firmware contents. For
distributions which do not support the fallback userspace mechanism,
there should be essentially no difference between request_firmware and
request_firmware_direct.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Acked-by: NShannon Nelson <snelson@pensando.io>
Acked-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

VFs do not have access permissions to issue NVM_GET_DEV_INFO
firmware command.

Fixes: 4933f675 ("bnxt_en: Add bnxt_hwrm_nvm_get_dev_info() to query NVM info.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

bnxt_add_one_ctr() adds a hardware counter to a software counter and
adjusts for the hardware counter wraparound against the mask.  The logic
assumes that the hardware counter is always smaller than or equal to
the mask.

This assumption is mostly correct.  But in some cases if the firmware
is older and does not provide the accurate mask, the driver can use
a mask that is smaller than the actual hardware mask.  This can cause
some extra carry bits to be added to the software counter, resulting in
counters that far exceed the actual value.  Fix it by masking the
hardware counter with the mask passed into bnxt_add_one_ctr().

Fixes: fea6b333 ("bnxt_en: Accumulate all counters.")
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Firmware is unable to retain the port counters during any kind of
fatal or non-fatal resets, so we must clear the port counters to
avoid false detection of port counter overflow.

Fixes: fea6b333 ("bnxt_en: Accumulate all counters.")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The module eeprom address range returned by bnxt_get_module_eeprom()
should be 256 bytes of A0h address space, the lower half of the A2h
address space, and page 0 for the upper half of the A2h address space.

Fix the firmware call by passing page_number 0 for the A2h slave address
space.

Fixes: 42ee18fe ("bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO")
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In the AER or firmware reset flow, if we are in fatal error state or
if pci_channel_offline() is true, we don't send any commands to the
firmware because the commands will likely not reach the firmware and
most commands don't matter much because the firmware is likely to be
reset imminently.

However, the HWRM_FUNC_RESET command is different and we should always
attempt to send it.  In the AER flow for example, the .slot_reset()
call will trigger this fw command and we need to try to send it to
effect the proper reset.

Fixes: b340dc68 ("bnxt_en: Avoid sending firmware messages when AER error is detected.")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

bnxt_open_nic() is called during configuration changes that require
the NIC to be closed and then opened.  This call is protected by
rtnl_lock.  Firmware reset can be happening at the same time.  Only
critical portions of the entire firmware reset sequence are protected
by the rtnl_lock.  It is possible that bnxt_open_nic() can be called
when the firmware reset sequence is aborting.  In that case,
bnxt_open_nic() needs to check if the ABORT_ERR flag is set and
abort if it is.  The configuration change that resulted in the
bnxt_open_nic() call will fail but the NIC will be brought to a
consistent IF_DOWN state.

Without this patch, if bnxt_open_nic() were to continue in this error
state, it may crash like this:

[ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en]
[ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0
[ 1648.659813] Oops: 0000 [#1] SMP
[ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common
[ 1648.660063]  tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse
[ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G           OE  ------------   3.10.0-1152.el7.x86_64 #1
[ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020
[ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000
[ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>]  [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en]
[ 1648.663171] RSP: 0018:ffff94f55df1fba8  EFLAGS: 00010202
[ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000
[ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0
[ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008
[ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0
[ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40
[ 1648.667695] FS:  00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000
[ 1648.668447] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0
[ 1648.669966] Call Trace:
[ 1648.670730]  [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en]
[ 1648.671496]  [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en]
[ 1648.672263]  [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en]
[ 1648.673031]  [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en]
[ 1648.673793]  [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en]
[ 1648.674550]  [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0
[ 1648.675306]  [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0
[ 1648.676061]  [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60
[ 1648.676810]  [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0
[ 1648.677548]  [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0
[ 1648.678282]  [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500
[ 1648.679016]  [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0
[ 1648.679745]  [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a
[ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7
[ 1648.681986] RIP  [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en]
[ 1648.682724]  RSP <ffff94f55df1fba8>
[ 1648.683451] CR2: 0000000000000000

Fixes: ec5d31e3 ("bnxt_en: Handle firmware reset status during IF_UP.")
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When a PCIe fatal error occurs, the internal latched BAR addresses
in the chip get reset even though the BAR register values in config
space are retained.

pci_restore_state() will not rewrite the BAR addresses if the
BAR address values are valid, causing the chip's internal BAR addresses
to stay invalid.  So we need to zero the BAR registers during PCIe fatal
error to force pci_restore_state() to restore the BAR addresses.  These
write cycles to the BAR registers will cause the proper BAR addresses to
latch internally.

Fixes: 6316ea6d ("bnxt_en: Enable AER support.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

As part of the commit b148bb23
("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."),
cancel_delayed_work_sync() is called only for VFs to fix a possible
crash by cancelling any pending delayed work items. It was assumed
by mistake that the flush_workqueue() call on the PF would flush
delayed work items as well.

As flush_workqueue() does not cancel the delayed workqueue, extend
the fix for PFs. This fix will avoid the system crash, if there are
any pending delayed work items in fw_reset_task() during driver's
.remove() call.

Unify the workqueue cleanup logic for both PF and VF by calling
cancel_work_sync() and cancel_delayed_work_sync() directly in
bnxt_remove_one().

Fixes: b148bb23 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

A recent patch has moved the workqueue cleanup logic before
calling unregister_netdev() in bnxt_remove_one().  This caused a
regression because the workqueue can be restarted if the device is
still open.  Workqueue cleanup must be done after unregister_netdev().
The workqueue will not restart itself after the device is closed.

Call bnxt_cancel_sp_work() after unregister_netdev() and
call bnxt_dl_fw_reporters_destroy() after that.  This fixes the
regession and the original NULL ptr dereference issue.

Fixes: b16939b5 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch adds FW versions stored in the flash to devlink info_get
callback.  Return the correct fw.psid running version using the
newly added bp->nvm_cfg_ver.

v2:
Ensure stored pkg_name string is NULL terminated when copied to
devlink.

Return directly from the last call to bnxt_dl_info_put().

If the FW call to get stored version fails for any reason, return
success immediately to devlink without the stored versions.
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-10-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add a new function bnxt_dl_info_put() to simplify the code, as there
are more stored firmware version fields to be added in the next patch.

Also, rename fw_ver variable name to ncsi_ver for better naming while
copying to devlink info_get cb.

v2:
Ensure active_pkg_name string is NULL terminated when copied to
devlink.

Return directly from the last call to bnxt_dl_info_put().
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-9-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add a new bnxt_hwrm_nvm_get_dev_info() to query firmware version
information via NVM_GET_DEV_INFO firmware command.  Use it to
get the running version of the NVM configuration information.

This new function will also be used in subsequent patches to get the
stored firmware versions.
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-8-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If the VF virtual link is set to always enabled, the speed may be
unknown when the physical link is down.  The driver currently logs
the link speed as 4294967295 Mbps which is SPEED_UNKNOWN.  Modify
the link up log message as "speed unknown" which makes more sense.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-7-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Log these values that contain useful firmware state information.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-6-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

event_data1 and event_data2 are used when processing most events.
Store these in local variables at the beginning of the function to
simplify many of the case statements.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-5-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Currently, bp->msg_enable has default value of 0.  It is more useful
to have the commonly used NETIF_MSG_DRV and NETIF_MSG_HW enabled by
default.

v2: Change the fall back bnxt_reset_task() inside bnxt_rx_ring_reset()
to silent mode.  With older fw, we would take the fall back path and
it would be very noisy.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-4-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Online self tests are not disruptive and can be run in NPAR mode
and in multi-host NIC as well.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-3-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If NVRAM resources are locked, NVM writes are not permitted. In such
scenarios, firmware returns HWRM_ERR_CODE_RESOURCE_LOCKED error to
firmware commands.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-2-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Currently, the driver will schedule RX ring reset when we get a buffer
error in the RX completion record.  These RX buffer errors can be due
to normal out-of-buffer conditions or a permanent error in the RX
ring.  Because the driver cannot distinguish between these 2
conditions, we assume all these buffer errors require reset.

This is very disruptive when it is just a normal out-of-buffer
condition.  Newer firmware will now monitor the rings for the permanent
failure and will send a notification to the driver when it happens.
This allows the driver to reset only when such a notification is
received.  In environments where we have predominently out-of-buffer
conditions, we now can avoid these unnecessary resets.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is logic in the RX path to detect unexpected handles in the
RX completion.  We'll print a warning and schedule a reset.  The
next expected handle is then set to 0xffff which is guaranteed to
not match any valid handle.  This will force all remaining packets in
the ring to be discarded before the reset.  There can be hundreds of
these packets remaining in the ring and there is no need to print the
warnings for these forced errors.
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a per ring rx_resets counter to count these RX resets.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some older chips, it is necessary to do a reset when we get buffer
errors associated with an RX ring.  These buffer errors may become
frequent if the RX ring underruns under heavy traffic.  The current
code does a global reset of all reasources when this happens.  This
works but creates a big disruption of all rings when one RX ring is
having problem.  This patch implements a localized RX ring reset of
just the RX ring having the issue.  All other rings including all
TX rings will not be affected by this single RX ring reset.

Only the older chips prior to the P5 class supports this reset.
Because it is not a global reset, packets may still be arriving
while we are calling firmware to reset that ring.  We need to be
sure that we don't post any buffers during this time while the
ring is undergoing reset.  After firmware completes successfully,
the ring will be in the reset state with no buffers and we can start
filling it with new buffers and posting them.
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnxt_init_one_rx_ring() includes logic to initialize the BDs for one RX
ring and to allocate the buffers.  Separate the allocation logic into a
new bnxt_alloc_one_rx_ring() function.  The allocation function will be
used later to allocate new buffers for one specified RX ring when we
reset that RX ring.
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnxt_free_rx_skbs() frees all the allocated buffers and SKBs for
every RX ring.  Refactor this function by calling a new function
bnxt_free_one_rx_ring_skbs() to free these buffers on one specified
RX ring at a time.  This is preparation work for resetting one RX
ring during run-time.
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>