This patch moves the implementation of get_apic_base and set_apic_base
from kvm_main.c to x86.c
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves the definition of segment_descriptor_64 for AMD64 and
EM64T from kvm_main.c to segment_descriptor.h. It also adds a proper
#ifndef...#define...#endif around that header file.
The implementation of segment_base is moved from kvm_main.c to x86.c.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch splits kvm_vm_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
The patch is unchanged since last submission.

Common ioctls for all architectures are:
KVM_CREATE_VCPU, KVM_GET_DIRTY_LOG, KVM_SET_USER_MEMORY_REGION

x86 specific ioctls are:
KVM_SET_MEMORY_REGION,
KVM_GET/SET_NR_MMU_PAGES, KVM_SET_MEMORY_ALIAS, KVM_CREATE_IRQCHIP,
KVM_CREATE_IRQ_LINE, KVM_GET/SET_IRQCHIP
KVM_SET_TSS_ADDR
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Emulation may cause a shadow pte to be instantiated, which requires
memory resources.  Make sure the caches are filled to avoid an oops.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The code that dispatches the page fault and emulates if we failed to map
is duplicated across vmx and svm.  Merge it to simplify further bugfixing.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The 'mov abs' instruction family (opcodes 0xa0 - 0xa3) still depends on cr2
provided by the page fault handler.  This is wrong for several reasons:

- if an instruction accessed misaligned data that crosses a page boundary,
  and if the fault happened on the second page, cr2 will point at the
  second page, not the data itself.

- if we're emulating in real mode, or due to a FlexPriority exit, there
  is no cr2 generated.

So, this change adds decoding for this instruction form and drops reliance
on cr2.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of AMD i386

* Original code saves following registers:

    ebx, ecx, edx, esi, edi, ebp

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    ebx, ecx, edx, esi, edi

  - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
    description.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of AMD x86_64.

* Original code saves following registers:

    rbx, rcx, rdx, rsi, rdi, rbp,
    r8, r9, r10, r11, r12, r13, r14, r15

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    rbx, rcx, rdx, rsi, rdi
    r8, r9, r10, r11, r12, r13, r14, r15

  - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
    description.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel i386.

* Original code saves following registers:

    eax, ebx, ecx, edx, edi, esi, ebp (using popa)

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    ebx, edi, rsi

  - doesn't save eax because it is an output operand (vmx->fail)

  - cannot put ecx in clobber description because it is an input operand,
    but as we modify it and we want to keep its value (vcpu), we must
    save it (pop/push)

  - ebp is saved (pop/push) because GCC seems to ignore its use the clobber
    description.

  - edx is saved (pop/push) because it is reserved by GCC (REGPARM) and
    cannot be put in the clobber description.

  - line "mov (%%esp), %3 \n\t" has been removed because %3
    is ecx and ecx is restored just after.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel x86_64.

* Original code saves following registers:

    rax, rbx, rcx, rdx, rsi, rdi, rbp,
    r8, r9, r10, r11, r12, r13, r14, r15

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    rbx, rdi, rsi,
    r8, r9, r10, r11, r12, r13, r14, r15

  - doesn't save rax because it is an output operand (vmx->fail)

  - cannot put rcx in clobber description because it is an input operand,
    but as we modify it and we want to keep its value (vcpu), we must
    save it (pop/push)

  - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
    description.

  - rdx is saved (pop/push) because it is reserved by GCC (REGPARM) and
    cannot be put in the clobber description.

  - line "mov (%%rsp), %3 \n\t" has been removed because %3
    is rcx and rcx is restored just after.

  - line ASM_VMX_VMWRITE_RSP_RDX() is moved out of the ifdef/else/endif
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel.  This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Reserve a few memory slots for kernel internal use.  This is good for case
you have to register memory region and you want to be sure it was not
registered from userspace, and for case you want to register a memory region
that won't be seen from userspace.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove kvm memory slot allocation mechanism from the ioctl
and put it to exported function.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm_vm_ioctl_set_memory_region() is able to remove memory in addition to
adding it.  Therefore when using kernel swapping support for old userspaces,
we need to munmap the memory if the user request to remove it
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This will help trap accesses to guest memory in atomic context.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Split guest reset code out of vmx_vcpu_setup().  Besides being cleaner, this
moves the realmode tss setup (which can sleep) outside vmx_vcpu_setup()
(which is executed with preemption enabled).

[izik: remove unused variable]
Signed-off-by: NAvi Kivity <avi@qumranet.com>

First step to split kvm_vcpu.  Currently, we just use an macro to define
the common fields in kvm_vcpu for all archs, and all archs need to define
its own kvm_vcpu struct.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allocate a userspace buffer for older userspaces.  Also eliminate phys_mem
buffer.  The memset() in kvmctl really kills initial memory usage but swapping
works even with old userspaces.

A side effect is that maximum guest side is reduced for older userspace on
i386.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

ppc and s390 offer the possibility to track process times precisely
by looking at cpu timer on every context switch, irq, softirq etc.
We can use that infrastructure as well for guest time accounting.
We need to account the used time before we change the state.
This patch adds a call to account_system_vtime to kvm_guest_enter
and kvm_guest exit. If CONFIG_VIRT_CPU_ACCOUNTING is not set,
account_system_vtime is defined in hardirq.h as an empty function,
which means this patch does not change the behaviour on other
platforms.

I compile tested this patch on x86 and function tested the patch on
s390.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows guest memory to be swapped.  Pages which are currently mapped
via shadow page tables are pinned into memory, but all other pages can
be freely swapped.

The patch makes gfn_to_page() elevate the page's reference count, and
introduces kvm_release_page() that pairs with it.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

In case the page is not present in the guest memory map, return a dummy
page the guest can scribble on.

This simplifies error checking in its users.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current kvm mmu only reverse maps writable translation.  This is used
to write-protect a page in case it becomes a pagetable.

But with swapping support, we need a reverse mapping of read-only pages as
well:  when we evict a page, we need to remove any mapping to it, whether
writable or not.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instruction: cmc, clc, cli, sti
opcodes: 0xf5, 0xf8, 0xfa, 0xfb respectively.

[avi: fix reference to EFLG_IF which is not defined anywhere]
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Simplify the walker level loop not to carry so much information from one
loop to the next.  In addition to being complex, this made kmap_atomic()
critical sections difficult to manage.

As a result of this change, kmap_atomic() sections are limited to actually
touching the guest pte, which allows the other functions called from the
walker to do sleepy operations.  This will happen when we enable swapping.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instructions:
	inc r16/r32 (opcode 0x40-0x47)
	dec r16/r32 (opcode 0x48-0x4f)
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We now have a new namespace, KVM_REQ_*, for bits in vcpu->requests.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Beside the obvious goodness of making code more common, this prevents
a livelock with the next patch which moves interrupt injection out of the
critical section.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add new-line at end of debug strings.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If no apic is enabled in the bitmap of an interrupt delivery with delivery
mode of lowest priority, a warning should be reported rather than select
a fallback vcpu
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NEddie (Yaozu) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch splits kvm_vcpu_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.

Common ioctls for all architectures are:
KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT,
KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU
Note that some PPC chips don't have an FPU, so we might need an #ifdef
around KVM_GET/SET_FPU one day.

x86 specific ioctls are:
KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS

An interresting aspect is vcpu_load/vcpu_put. We now have a common
vcpu_load/put which does the preemption stuff, and an architecture
specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the
vmx/svm function defined in kvm_x86_ops.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Since the mmu uses different shadow pages for dirty large pages and clean
large pages, this allows the mmu to drop ptes that are now invalid.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is consistent with real-mode permissions.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

By forcing clean huge pages to be read-only, we have separate roles
for the shadow of a clean large page and the shadow of a dirty large
page.  This is necessary because different ptes will be instantiated
for the two cases, even for read faults.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We must set the bit before the shift, otherwise the wrong bit gets set.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is more consistent with the accessed bit management, and makes the dirty
bit available earlier for other purposes.
Signed-off-by: NAvi Kivity <avi@qumranet.com>