- 23 10月, 2019 2 次提交
-
-
由 Vivien Didelot 提交于
Now that ports are dynamically listed in the fabric, there is no need to provide a special helper to allocate the dsa_switch structure. This will give more flexibility to drivers to embed this structure as they wish in their private structure. Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
-
由 Vivien Didelot 提交于
Do not let the drivers access the ds->ports static array directly while there is a dsa_to_port helper for this purpose. At the same time, un-const this helper since the SJA1105 driver assigns the priv member of the returned dsa_port structure. Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
-
- 06 10月, 2019 1 次提交
-
-
由 Florian Fainelli 提交于
Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: NHubert Feurstein <h.feurstein@gmail.com> Fixes: ed3af5fd ("net: dsa: b53: Add support for port mirroring") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2019 1 次提交
-
-
由 Florian Fainelli 提交于
Add support for configuring the per-port egress flooding control for both Unicast and Multicast traffic. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2019 1 次提交
-
-
由 Vivien Didelot 提交于
The .port_enable and .port_disable operations are currently only called for user ports, hence assuming they have a slave device. In preparation for using these operations for other port types as well, simply guard all implementations against non user ports and return directly in such case. Note that bcm_sf2_sw_suspend() currently calls bcm_sf2_port_disable() (and thus b53_disable_port()) against the user and CPU ports, so do not guards those functions. They will be called for unused ports in the future, but that was expected by those drivers anyway. Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2019 1 次提交
-
-
由 Benedikt Spranger 提交于
A b53 device may configured through an external EEPROM like the switch device on the Lamobo R1 router board. The configuration of a port may therefore differ from the reset configuration of the switch. The switch configuration reported by the DSA subsystem is different until the port is configured by DSA i.e. a port can be active, while the DSA subsystem reports the port is inactive. Disable all ports and not only the unused ones to put all ports into a well defined state. Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2019 3 次提交
-
-
由 Vladimir Oltean 提交于
While possible (and safe) to use the newly introduced dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a bit awkward, so simply retrieve this from the dsa_switch structure. Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
Since DSA has recently learned to treat better with drivers that set vlan_filtering_is_global, doing this is no longer required. Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
The DSA core is now able to do this check prior to calling the .port_vlan_filtering callback, so tell it that VLAN filtering is global for this particular hardware. Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Suggested-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2019 1 次提交
-
-
由 Andrew Lunn 提交于
No current DSA driver makes use of the phydev parameter passed to the disable_port call. Remove it. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2019 3 次提交
-
-
由 Florian Fainelli 提交于
The CPU port is special and does not need to obey VLAN restrictions as far as untagged traffic goes, also, having the CPU port be part of a particular PVID is against the idea of keeping it tagged in all VLANs. Fixes: ca893194 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
VLAN filtering can be built into the kernel, and also dynamically turned on/off through the bridge master device. Allow re-configuring the switch appropriately to account for that by deciding whether VLAN table (v_table) misses should lead to a drop or forward. Fixes: a2482d2c ("net: dsa: b53: Plug in VLAN support") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We were not consistent in how the default VID of a given port was defined, b53_br_leave() would make sure the VLAN ID would be either 0/1 depending on the switch generation, but b53_configure_vlan(), which is the default configuration would unconditionally set it to 1. The correct value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that mistake ever again, introduce a helper function: b53_default_pvid() to factor that out. Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2018 1 次提交
-
-
由 Florian Fainelli 提交于
Commit c499696e ("net: dsa: b53: Stop using dev->cpu_port incorrectly") was a bit too trigger happy in removing the CPU port from the VLAN membership because we rely on DSA to program the CPU port VLAN, which it does, except it does not bother itself with tagged/untagged and just usese untagged. Having the CPU port "follow" the user ports tagged/untagged is not great and does not allow for properly differentiating, so keep the CPU port tagged in all VLANs. Reported-by: NGerhard Wiesinger <lists@wiesinger.com> Fixes: c499696e ("net: dsa: b53: Stop using dev->cpu_port incorrectly") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2018 1 次提交
-
-
由 Florian Fainelli 提交于
In both 802.3z and SGMII modes we need to configure the MAC accordingly to flip between Fiber and SGMII modes, and we need to read the MAC status from the SGMII in-band control word. Fixes: 0e01491d ("net: dsa: b53: Add SerDes support") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 9月, 2018 1 次提交
-
-
由 Dan Carpenter 提交于
The "pause" variable is only initialized on BCM5301x. Fixes: 5e004460 ("net: dsa: b53: Add helper to set link parameters") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2018 4 次提交
-
-
由 Florian Fainelli 提交于
Add support for the Northstar Plus SerDes which is accessed through a special page of the switch. Since this is something that most people probably will not want to use, make it a configurable option with a default on ARCH_BCM_NSP where it is the most useful currently. The SerDes supports both SGMII and 1000baseX modes for both lanes, and 2500baseX for one of the lanes, and is internally looking like a seemingly standard MII PHY, except for the few bits that got repurposed. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add support for PHYLINK, things are reasonably straight forward since we do not yet support SerDes interfaces, that leaves us with just MLO_AN_PHY and MLO_AN_FIXED to deal with. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Extract the logic from b53_adjust_link() responsible for overriding a given port's link, speed, duplex and pause settings and make two helper functions to set the port's configuration and the port's link settings. We will make use of both, as separate functions while adding PHYLINK support next. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Some switches expose individual interrupt line(s) for port specific event(s), allow configuring these interrupts at an appropriate time during port_enable/disable callbacks where all port specific resources are known to be set-up and ready for use. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 07 6月, 2018 1 次提交
-
-
由 Arun Parameswaran 提交于
In the Broadcom Cygnus SoC, the brcm tag needs to be inserted in between the mac address and the ether type (should use 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal b53 switch. Since the Cygnus was added with the BCM58XX device id and the BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is broken, due to the incorrect brcm tag location. Add a new b53 device id (BCM583XX) for Cygnus family to fix the issue. Add the new device id to the BCM58XX family as Cygnus is similar to the BCM58XX in most other functionalities. Fixes: 11606039 ("net: dsa: b53: Support prepended Broadcom tags") Signed-off-by: NArun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: NScott Branden <scott.branden@broadcom.com> Reported-by: NClément Péron <peron.clem@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NClément Péron <peron.clem@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2018 1 次提交
-
-
由 Damien Thébault 提交于
This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: NDamien Thébault <damien.thebault@vitec.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2018 2 次提交
-
-
由 Florian Fainelli 提交于
Allow the b53 driver to return PHY statistics when the CPU port used is different than 5, 7 or 8, because those are typically PHY-less on most devices. This is useful for debugging link problems between the switch and an external host when using a non standard CPU port number (e.g: 4). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Up until now we largely assumed that we were interested in ETH_SS_STATS type of strings for all ethtool operations, this is about to change with the introduction of additional string sets, e.g: ETH_SS_PHY_STATS. Update all functions to take an appropriate stringset argument and act on it when it is different than ETH_SS_STATS for now. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2018 1 次提交
-
-
由 Florian Fainelli 提交于
Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2018 1 次提交
-
-
由 Andrew Lunn 提交于
By passing the port, we allow different ports to have different statistics. This is useful since some ports have SERDES interfaces with their own statistic counters. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2018 1 次提交
-
-
由 Florian Fainelli 提交于
Models such as BCM5395/97/98 and BCM53125/24/53115 and compatible require that we turn on managed mode to actually act on Broadcom tags, otherwise they just pass them through on ingress (host -> switch) and don't insert them in egress (switch -> host). Turning on managed mode is simple, but requires us to properly support ARL misses on multicast addresses which is a much more involved set of changes not suitable for a bug fix for this release. Reported-by: NJochen Friedrich <jochen@scram.de> Fixes: 7edc58d6 ("net: dsa: b53: Turn on Broadcom tags") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The DSA switch VLAN ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from VLAN prepare and add operations. At the same time, fix the following checkpatch warning: WARNING: line over 80 characters #74: FILE: drivers/net/dsa/dsa_loop.c:177: + const struct switchdev_obj_port_vlan *vlan) Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
Utilize the much more capable b53_get_tag_protocol() which takes care of all Broadcom switches specifics to resolve which port can have Broadcom tags enabled or not. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2017 2 次提交
-
-
由 Florian Fainelli 提交于
On BCM58xx devices (Northstar Plus), there is an accelerator attached to port 8 which would only work if we use prepended Broadcom tags. Resolve that difference in our get_tag_protocol() function by setting the appropriate tagging protocol in that case. We need to change b53_brcm_hdr_setup() a little bit now since we can deal with two types of Broadcom tags. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2017 2 次提交
-
-
由 Florian Fainelli 提交于
Enable Broadcom tags for b53 devices, except 5325 and 5365 which use a different Broadcom tag format not yet supported by net/dsa/tag_brcm.c. We also make sure that we can turn on Broadcom tags on a CPU port number that is capable of that: 5, 7 or 8. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
dev->cpu_port is the driver local information that should only be used to look up register offsets for a particular port, when they differ (e.g: IMP port override), but it should certainly not be used in place of the DSA configured CPU port. Since the DSA switch layer calls port_vlan_{add,del}() on the CPU port as well, we can remove the specific setting of the CPU port within port_vlan_{add,del}. Fixes: ff39c2d6 ("net: dsa: b53: Add bridge support") Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
Have b53_hdr_setup() check what kind of tagging protocol is configured (Broadcom or none) and apply the correct settings in both cases. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
bcm_sf2 and b53 replicate the same operations: clear all VLANs and set their ports to the default VLAN tag (1 for these devices) so export the b53 function doing just that. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
As the comment above the chunk states, the b53 driver attempts to disable the unused ports. But using ds->enabled_port_mask is misleading, because this mask reports in fact the user ports. To avoid confusion and fix this, this patch introduces an explicit dsa_is_unused_port helper which ensures the corresponding bit is not masked in any of the switch port masks. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The dsa_port structure is part of DSA core data and must only be updated by the later. It is OK and sometimes necessary for the DSA drivers to access this data, but this has to be read only. For that purpose, add a dsa_to_port() helper which returns a const pointer to a dsa_port structure which must be used by DSA drivers from now on instead of digging into ds->ports[] themselves. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
Each port in DSA has its own dedicated CPU port currently available in its parent switch's ds->ports[port].cpu_dp. Use it instead of getting the unique tree CPU port, which will be deprecated soon. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-