stable inclusion
from stable-5.10.28
commit 1808ee421ce52923b7a77bdd22b1eb34a91392b2
bugzilla: 51779

--------------------------------

commit 5e4010e3 upstream.

The ACPI probe starts failing since commit bea46b98 ("usb: dwc3:
qcom: Add interconnect support in dwc3 driver"), because there is no
interconnect support for ACPI, and of_icc_get() call in
dwc3_qcom_interconnect_init() will just return -EINVAL.

Fix the problem by skipping interconnect init for ACPI probe, and then
the NULL icc_path_ddr will simply just scheild all ICC calls.

Fixes: bea46b98 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver")
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 137dfed1552af09fedca98bb984c113a45d565db
bugzilla: 51779

--------------------------------

commit 93f67280 upstream.

In host mode port connection status flag is "0" when loading
the driver. After loading the driver system asserts suspend
which is handled by "_dwc2_hcd_suspend()" function. Before
the system suspend the port connection status is "0". As
result need to check the "port_connect_status" if it is "0",
then skipping entering to suspend.

Cc: <stable@vger.kernel.org> # 5.2
Fixes: 6f6d7059 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE")
Signed-off-by: NArtur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 4e28aca967291418489dcbf7d7ebe1952623551d
bugzilla: 51779

--------------------------------

commit 5e3bbae8 upstream.

Increased the waiting timeout for HPRT0.PrtSusp register field
to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't
generated with the existing timeout.

Cc: <stable@vger.kernel.org> # 4.18
Fixes: 22bb5cfd ("usb: dwc2: Fix host exit from hibernation flow.")
Signed-off-by: NArtur Petrosyan <Arthur.Petrosyan@synopsys.com>
Acked-by: NMinas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 77c0d6af858b5f7d36a0fa90b54b9a98546fda22
bugzilla: 51779

--------------------------------

commit 72035f49 upstream.

init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool.
however, dev->dev is actually set after calling init_dma_pools(), which
effectively makes dma_pool_create(..NULL) and cause crash.
To fix this issue, init dma only after dev->dev is set.

[    1.317993] RIP: 0010:dma_pool_create+0x83/0x290
[    1.323257] Call Trace:
[    1.323390]  ? pci_write_config_word+0x27/0x30
[    1.323626]  init_dma_pools+0x41/0x1a0 [snps_udc_core]
[    1.323899]  udc_pci_probe+0x202/0x2b1 [amd5536udc_pci]

Fixes: 7c51247a (usb: gadget: udc: Provide correct arguments for 'dma_pool_create')
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NTong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 6f86681691c20f6a781533c4c129644765f25752
bugzilla: 51779

--------------------------------

commit 4e49bf37 upstream.

If tty-device registration fails the driver would fail to release the
data interface. When the device is later disconnected, the disconnect
callback would still be called for the data interface and would go about
releasing already freed resources.

Fixes: c93d8195 ("usb: cdc-acm: fix error handling in acm_probe()")
Cc: stable@vger.kernel.org      # 3.9
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 64deff1f4e0f8e5b56d10c58933ac188eff641c3
bugzilla: 51779

--------------------------------

commit 7180495c upstream.

If tty-device registration fails the driver copy of any Country
Selection functional descriptor would end up being freed twice; first
explicitly in the error path and then again in the tty-port destructor.

Drop the first erroneous free that was left when fixing a tty-port
resource leak.

Fixes: cae2bc76 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org      # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-2-johan@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 439a275211123c3c896f6131f4019cd820f66b93
bugzilla: 51779

--------------------------------

commit e4c77070 upstream.

This failure is so common that logging an error here amounts
to spamming log files.
Reviewed-by: NBruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 511302531eb8e52886b1b9a71b96f6dbb25e4215
bugzilla: 51779

--------------------------------

commit 6069e3e9 upstream.

We have a cycle of callbacks scheduling works which submit
URBs with thos callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.

The issue leads to faults like:

[   55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03
[   55.075624] pgd = be866494
[   55.078335] [6b6b6c03] *pgd=00000000
[   55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[   55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc
xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common
xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle
iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables
des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii
cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6
xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED
xt_comment x_tables ipv6
[   55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G
   T 5.8.17 #1
[   55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree)
[   55.148304] Workqueue: events acm_softint [cdc_acm]
[   55.153196] PC is at kobject_get+0x10/0xa4
[   55.157302] LR is at usb_get_dev+0x14/0x1c
[   55.161402] pc : [<8047c06c>]    lr : [<80560448>]    psr: 20000193
[   55.167671] sp : bca39ea8  ip : 00007374  fp : bf6cbd80
[   55.172899] r10: 00000000  r9 : bdd92284  r8 : bdd92008
[   55.178128] r7 : 6b6b6b6b  r6 : fffffffe  r5 : 60000113  r4 : 6b6b6be3
[   55.184658] r3 : 6b6b6b6b  r2 : 00000111  r1 : 00000000  r0 : 6b6b6be3
[   55.191191] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM Segment none
[   55.198417] Control: 10c5387d  Table: bcf0c06a  DAC: 00000051
[   55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89)
[   55.210439] Stack: (0xbca39ea8 to 0xbca3a000)
[   55.214805] 9ea0:                   bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8
[   55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c
[   55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001
[   55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00
[   55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80
[   55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae
[   55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4
[   55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000
[   55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000
[   55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c)
[   55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8)
[   55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0)
[   55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm])
[   55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8)
[   55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc)
[   55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180)
[   55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c)
[   55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8)
Tested-by: NBruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit e700e3aec303597851f3113b0837fde7af44223f
bugzilla: 51779

--------------------------------

commit 08dff274 upstream.

Counting break events is nice but we should actually report them to
the tty layer.

Fixes: 5a6a62bd ("cdc-acm: add TIOCMIWAIT")
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 9efa606a83e03773b9eb3ede12016640c3e750f7
bugzilla: 51779

--------------------------------

commit 6f978a30 upstream.

The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.

Fixes: 94a631d9 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 1addcb1f77d6c8c38ca0cfa6533df7a0287f9663
bugzilla: 51779

--------------------------------

commit 92af4fc6 upstream.

Pinephone running on Allwinner A64 fails to suspend with USB devices
connected as reported by Bhushan Shah <bshah@kde.org>. Reverting
commit 5fbf7a25 ("usb: musb: fix idling for suspend after
disconnect interrupt") fixes the issue.

Let's add suspend checks also for suspend after disconnect interrupt
quirk handling like we already do elsewhere.

Fixes: 5fbf7a25 ("usb: musb: fix idling for suspend after disconnect interrupt")
Reported-by: NBhushan Shah <bshah@kde.org>
Tested-by: NBhushan Shah <bshah@kde.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 15e61d9ae7ac6bf9a2343464401f572da0604673
bugzilla: 51779

--------------------------------

commit 0bd86049 upstream.

This LTE modem (M.2 card) has a bug in its power management:
there is some kind of race condition for U3 wake-up between the host and
the device. The modem firmware sometimes crashes/locks when both events
happen at the same time and the modem fully drops off the USB bus (and
sometimes re-enumerates, sometimes just gets stuck until the next
reboot).

Tested with the modem wired to the XHCI controller on an AMD 3015Ce
platform. Without the patch, the modem dropped of the USB bus 5 times in
3 days. With the quirk, it stayed connected for a week while the
'runtime_suspended_time' counter incremented as excepted.
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 4027d6e88fef5c4a096571dcf325dc5b9e5d41c9
bugzilla: 51779

--------------------------------

commit 1cc5ed25 upstream.

Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling.

UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42
shift exponent 768 is too large for 32-bit type 'int'

Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit c04adcc819d3bdd85a5dc2523687707b89724df7
bugzilla: 51779

--------------------------------

[ Upstream commit 829933ef ]

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

 1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added to
    doubly linked list.
 2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added to
    doubly linked list.
 3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
 4. Close the first nosy device and nosy_release will be called. In
    nosy_release, client A will be unlinked and freed.
 5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.

Fix this bug by adding a check before inserting a client.  If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

   BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
   Write of size 8 at addr ffff888102ad7360 by task poc
   CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   Call Trace:
     nosy_release+0x1ea/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Allocated by task 337:
     nosy_open+0x154/0x4d0
     misc_open+0x2ec/0x410
     chrdev_open+0x20d/0x5a0
     do_dentry_open+0x40f/0xe80
     path_openat+0x1cf9/0x37b0
     do_filp_open+0x16d/0x390
     do_sys_openat2+0x11d/0x360
     __x64_sys_open+0xfd/0x1a0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Freed by task 337:
     kfree+0x8f/0x210
     nosy_release+0x158/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
   The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)

[ Modified to use 'list_empty()' inside proper lock  - Linus ]

Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/Reported-and-tested-by: N马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: NZheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 2c7d85026324200fd89dde13683b041f41805924
bugzilla: 51779

--------------------------------

[ Upstream commit 37df9f3f ]

Function hvfb_probe() calls hvfb_getmem(), expecting upon return that
info->apertures is either NULL or points to memory that should be freed
by framebuffer_release().  But hvfb_getmem() is freeing the memory and
leaving the pointer non-NULL, resulting in a double free if an error
occurs or later if hvfb_remove() is called.

Fix this by removing all kfree(info->apertures) calls in hvfb_getmem().
This will allow framebuffer_release() to free the memory, which follows
the pattern of other fbdev drivers.

Fixes: 3a6fb6c4 ("video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.")
Signed-off-by: NLv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210324103724.4189-1-lyl2019@mail.ustc.edu.cnSigned-off-by: NWei Liu <wei.liu@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit a267a7e1c0cabf9d17ec4808b7900c366f253322
bugzilla: 51779

--------------------------------

[ Upstream commit b522f830 ]

It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended.
Otherwise it can't be enabled by simply change the cable in the connector.

Enable corresponding quirk for the platform in question.

Fixes: e5f4ca3f ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression")
Suggested-by: NSerge Semin <fancer.lancer@gmail.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210322125244.79407-1-andriy.shevchenko@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit bf4c643192b39893f7d502ffd2d9ae45a95f7479
bugzilla: 51779

--------------------------------

[ Upstream commit 2e8496f3 ]

Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.

Fixes: 36847f9e ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: NRichard Gong <richard.gong@intel.com>
Reviewed-by: NTom Rix <trix@redhat.com>
Signed-off-by: NMoritz Fischer <mdf@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 3b681a1c43b6e98d7ced5dc016d2afeb5a84993a
bugzilla: 51779

--------------------------------

[ Upstream commit d3bdd1c3 ]

When devm_kcalloc() fails, we should execute device_unregister()
to unregister edev->dev from system.

Fixes: 046050f6 ("extcon: Update the prototype of extcon_register_notifier() with enum extcon")
Signed-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 023d13952e9b7479e60d79098a7dcc82276ea315
bugzilla: 51779

--------------------------------

[ Upstream commit c9570d4a ]

Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON
case.  This is useful for compile testing and for drivers which use
EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON).

Fixes: 815429b3 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 0fe56e294cef043d0ed4ef0331961ffaf3e948bd
bugzilla: 51779

--------------------------------

commit c971af25 upstream.

The restore in resume should match to suspend which only set for RK3288
SoCs pinctrl.

Fixes: 8dca9331 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume")
Reviewed-by: NJianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWang Panzhenzhuan <randy.wang@rock-chips.com>
Signed-off-by: NJianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 80ee9e02be3d0e3f45883f1d4c5a1ba8cc7d19fe
bugzilla: 51779

--------------------------------

commit e0146a10 upstream.

Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there
are compile errors:

 drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration]
                            ret = mm_iommu_put(data->mm, data->mem);

As PPC only defines these functions when the config is set.

Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only
IOMMU that could have satisfied IOMMU_API on POWERNV.

Fixes: 179209fa ("vfio: IOMMU_API should be selected")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit d2308dd5119bd99bf00b7eb2836bd605299cfaf9
bugzilla: 51779

--------------------------------

commit ac097aec upstream.

The SOR resets are exclusively shared with the SOR power domain. This
means that exclusive access can only be granted temporarily and in order
for that to work, a rigorous sequence must be observed. To ensure that a
single consumer gets exclusive access to a reset, each consumer must
implement a rigorous protocol using the reset_control_acquire() and
reset_control_release() functions.

However, these functions alone don't provide any guarantees at the
system level. Drivers need to ensure that the only a single consumer has
access to the reset at the same time. In order for the SOR to be able to
exclusively access its reset, it must therefore ensure that the SOR
power domain is not powered off by holding on to a runtime PM reference
to that power domain across the reset assert/deassert operation.

This used to work fine by accident, but was revealed when recently more
devices started to rely on the SOR power domain.

Fixes: 11c632e1 ("drm/tegra: sor: Implement acquire/release for reset")
Reported-by: NJonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit f552f95853f88946460d6f163e43b7526d7efa70
bugzilla: 51779

--------------------------------

commit a31500fe upstream.

Coupling of display controllers used to rely on runtime PM to take the
companion controller out of reset. Commit fd67e9c6 ("drm/tegra: Do
not implement runtime PM") accidentally broke this when runtime PM was
removed.

Restore this functionality by reusing the hierarchical host1x client
suspend/resume infrastructure that's similar to runtime PM and which
perfectly fits this use-case.

Fixes: fd67e9c6 ("drm/tegra: Do not implement runtime PM")
Reported-by: NDmitry Osipenko <digetx@gmail.com>
Reported-by: NPaul Fertser <fercerpav@gmail.com>
Tested-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 77a8e6f792d5cfca3c6a30845b069161647d1d55
bugzilla: 51779

--------------------------------

commit 69c3ed72 upstream.

Put DRM device on initialization failure path rather than directly
return error code.

Fixes: a67d5088 ("drm/imx: drop explicit drm_mode_config_cleanup")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 74612ecdf263b48b4ff6779ad3b2cf710372a1b0
bugzilla: 51779

--------------------------------

commit 5e46d1b7 upstream.

syzbot is reporting NULL pointer dereference at reiserfs_security_init()
[1], for commit ab17c4f0 ("reiserfs: fixup xattr_root caching")
is assuming that REISERFS_SB(s)->xattr_root != NULL in
reiserfs_xattr_jcreate_nblocks() despite that commit made
REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL
case possible.

I guess that commit 6cb4aff0 ("reiserfs: fix oops while creating
privroot with selinux enabled") wanted to check xattr_root != NULL
before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking
about the xattr root.

  The issue is that while creating the privroot during mount
  reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which
  dereferences the xattr root. The xattr root doesn't exist, so we get
  an oops.

Therefore, update reiserfs_xattrs_initialized() to check both the
privroot and the xattr root.

Link: https://syzkaller.appspot.com/bug?id=8abaedbdeb32c861dc5340544284167dd0e46cde # [1]
Reported-and-tested-by: Nsyzbot <syzbot+690cb1e51970435f9775@syzkaller.appspotmail.com>
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6cb4aff0 ("reiserfs: fix oops while creating privroot with selinux enabled")
Acked-by: NJeff Mahoney <jeffm@suse.com>
Acked-by: NJan Kara <jack@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 8c71f5b309556503dbc8650637bcd1d2576b15f5
bugzilla: 51779

--------------------------------

commit e3512fb6 upstream.

The page table of AMDGPU requires an alignment to CPU page so we should
check ioctl parameters for it.  Return -EINVAL if some parameter is
unaligned to CPU page, instead of corrupt the page table sliently.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NXi Ruoyao <xry111@mengyan1223.wang>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 78ceecd2ed45e39f2c5a09fffc983a5279c01737
bugzilla: 51779

--------------------------------

commit 5e61b84f upstream.

Offset calculation wasn't correct as start addresses are in pfn
not in bytes.

CC: stable@vger.kernel.org
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 28f901fe1634c04b3f0073704e5ec8d0d62a2764
bugzilla: 51779

--------------------------------

commit e92049ae upstream.

Amdgpu driver uses 4-byte data type as DQM fence memory,
and transmits GPU address of fence memory to microcode
through query status PM4 message. However, query status
PM4 message definition and microcode processing are all
processed according to 8 bytes. Fence memory only allocates
4 bytes of memory, but microcode does write 8 bytes of memory,
so there is a memory corruption.

Changes since v1:
  * Change dqm->fence_addr as a u64 pointer to fix this issue,
also fix up query_status and amdkfd_fence_wait_timeout function
uses 64 bit fence value to make them consistent.
Signed-off-by: NQu Huang <jinsdb@126.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit ec3e06e06f763d8ef5ba3919e2c4e59366b5b92a
bugzilla: 51779

--------------------------------

commit e720e7d0 upstream.

There are code paths that rely on zero_pfn to be fully initialized
before core_initcall.  For example, wq_sysfs_init() is a core_initcall
function that eventually results in a call to kernel_execve, which
causes a page fault with a subsequent mmput.  If zero_pfn is not
initialized by then it may not get cleaned up properly and result in an
error:

  BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1

Here is an analysis of the race as seen on a MIPS device. On this
particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until
initialized, at which point it becomes PFN 5120:

  1. wq_sysfs_init calls into kobject_uevent_env at core_initcall:
       kobject_uevent_env+0x7e4/0x7ec
       kset_register+0x68/0x88
       bus_register+0xdc/0x34c
       subsys_virtual_register+0x34/0x78
       wq_sysfs_init+0x1c/0x4c
       do_one_initcall+0x50/0x1a8
       kernel_init_freeable+0x230/0x2c8
       kernel_init+0x10/0x100
       ret_from_kernel_thread+0x14/0x1c

  2. kobject_uevent_env() calls call_usermodehelper_exec() which executes
     kernel_execve asynchronously.

  3. Memory allocations in kernel_execve cause a page fault, bumping the
     MM reference counter:
       add_mm_counter_fast+0xb4/0xc0
       handle_mm_fault+0x6e4/0xea0
       __get_user_pages.part.78+0x190/0x37c
       __get_user_pages_remote+0x128/0x360
       get_arg_page+0x34/0xa0
       copy_string_kernel+0x194/0x2a4
       kernel_execve+0x11c/0x298
       call_usermodehelper_exec_async+0x114/0x194

  4. In case zero_pfn has not been initialized yet, zap_pte_range does
     not decrement the MM_ANONPAGES RSS counter and the BUG message is
     triggered shortly afterwards when __mmdrop checks the ref counters:
       __mmdrop+0x98/0x1d0
       free_bprm+0x44/0x118
       kernel_execve+0x160/0x1d8
       call_usermodehelper_exec_async+0x114/0x194
       ret_from_kernel_thread+0x14/0x1c

To avoid races such as described above, initialize init_zero_pfn at
early_initcall level.  Depending on the architecture, ZERO_PAGE is
either constant or gets initialized even earlier, at paging_init, so
there is no issue with initializing zero_pfn earlier.

Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.comSigned-off-by: NIlya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Tested-by: N周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit d88b557b9b73dc50639e865a800a2f9ab2451a04
bugzilla: 51779

--------------------------------

commit b24bacd6 upstream.

The s390 specific vdso function __arch_get_hw_counter() is supposed to
consider tod clock steering.

If a tod clock steering event happens and the tod clock is set to a
new value __arch_get_hw_counter() will not return the real tod clock
value but slowly drift it from the old delta until the returned value
finally matches the real tod clock value again.

Unfortunately the type of tod_steering_delta unsigned while it is
supposed to be signed. It depends on if tod_steering_delta is negative
or positive in which direction the vdso code drifts the clock value.

Worst case is now that instead of drifting the clock slowly it will
jump into the opposite direction by a factor of two.

Fix this by simply making tod_steering_delta signed.

Fixes: 4bff8cb5 ("s390: convert to GENERIC_VDSO")
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit b332265430c8d6bf1a99fec489a38d954fd0ef72
bugzilla: 51779

--------------------------------

commit 72bbc226 upstream.

When converting the vdso assembler code to C it was forgotten to
actually copy the tod_steering_delta value to vdso_data page.

Which in turn means that tod clock steering will not work correctly.

Fix this by simply copying the value whenever it is updated.

Fixes: 4bff8cb5 ("s390: convert to GENERIC_VDSO")
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit f706acc9312b9bad5dd49f0733d9dc7ca3de8c01
bugzilla: 51779

--------------------------------

commit 9deb193a upstream.

Commit cbc3b92c fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.

Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:

          <idle>-0       [002] d... 1976396.837549: <stack trace>
 => trace_event_raw_event_sched_switch
 => __traceiter_sched_switch
 => __schedule
 => schedule_idle
 => do_idle
 => cpu_startup_entry
 => secondary_startup_64_no_verify
 => 0xc8c5e150ffff93de
 => 0xffff93de
 => 0
 => 0
 => 0xc8c5e17800000000
 => 0x1f30affff93de
 => 0x00000004
 => 0x200000000

Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.

Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/

Cc: stable@vger.kernel.org
Fixes: cbc3b92c ("tracing: Set kernel_stack's caller size properly")
Reported-by: NVasily Gorbik <gor@linux.ibm.com>
Tested-by: NVasily Gorbik <gor@linux.ibm.com>
Acked-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit cc038ab785a836677bfae8756e24e1e9ace00632
bugzilla: 51779

--------------------------------

commit c0c33442 upstream.

rpm_active indicates how many times the supplier usage_count has been
incremented. Consequently it must be updated after pm_runtime_get_sync() of
the supplier, not before.

Fixes: 4c06c4e6 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit da2976cd711b2e895ddc44f6975290762d7d08c9
bugzilla: 51779

--------------------------------

commit 9dfacc54 upstream.

pm_runtime_put_suppliers() must not decrement rpm_active unless the
consumer is suspended. That is because, otherwise, it could suspend
suppliers for an active consumer.

That can happen as follows:

 static int driver_probe_device(struct device_driver *drv, struct device *dev)
 {
	int ret = 0;

	if (!device_is_registered(dev))
		return -ENODEV;

	dev->can_match = true;
	pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
		 drv->bus->name, __func__, dev_name(dev), drv->name);

	pm_runtime_get_suppliers(dev);
	if (dev->parent)
		pm_runtime_get_sync(dev->parent);

 At this point, dev can runtime suspend so rpm_put_suppliers() can run,
 rpm_active becomes 1 (the lowest value).

	pm_runtime_barrier(dev);
	if (initcall_debug)
		ret = really_probe_debug(dev, drv);
	else
		ret = really_probe(dev, drv);

 Probe callback can have runtime resumed dev, and then runtime put
 so dev is awaiting autosuspend, but rpm_active is 2.

	pm_request_idle(dev);

	if (dev->parent)
		pm_runtime_put(dev->parent);

	pm_runtime_put_suppliers(dev);

 Now pm_runtime_put_suppliers() will put the supplier
 i.e. rpm_active 2 -> 1, but consumer can still be active.

	return ret;
 }

Fix by checking the runtime status. For any status other than
RPM_SUSPENDED, rpm_active can be considered to be "owned" by
rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing.
Reported-by: NAsutosh Das <asutoshd@codeaurora.org>
Fixes: 4c06c4e6 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit e6d8eb65532ee788e88468eb2af582c4e70012f0
bugzilla: 51779

--------------------------------

commit 3c346c0c upstream.

Fixing nested_vmcb_check_save to avoid all TOC/TOU races
is a bit harder in released kernels, so do the bare minimum
by avoiding that EFER.SVME is cleared.  This is problematic
because svm_set_efer frees the data structures for nested
virtualization if EFER.SVME is cleared.

Also check that EFER.SVME remains set after a nested vmexit;
clearing it could happen if the bit is zero in the save area
that is passed to KVM_SET_NESTED_STATE (the save area of the
nested state corresponds to the nested hypervisor's state
and is restored on the next nested vmexit).

Cc: stable@vger.kernel.org
Fixes: 2fcf4876 ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 5f6625f5cd5c593fae05a6ce22b406166bc796b8
bugzilla: 51779

--------------------------------

commit a58d9166 upstream.

Avoid races between check and use of the nested VMCB controls.  This
for example ensures that the VMRUN intercept is always reflected to the
nested hypervisor, instead of being processed by the host.  Without this
patch, it is possible to end up with svm->nested.hsave pointing to
the MSR permission bitmap for nested guests.

This bug is CVE-2021-29657.
Reported-by: NFelix Wilhelm <fwilhelm@google.com>
Cc: stable@vger.kernel.org
Fixes: 2fcf4876 ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit 6aaa3c2ebb4fefe06ce79b70b4b8ca43ff460ab4
bugzilla: 51779

--------------------------------

commit ab5eb336 upstream.

coprocessor_flush is not a part of fast exception handlers, but it uses
parts of fast coprocessor handling code that's why it's in the same
source file. It uses call0 opcode to invoke those parts so there are no
limitations on their relative location, but the rest of the code calls
coprocessor_flush with call8 and that doesn't work when vectors are
placed in a different gigabyte-aligned area than the rest of the kernel.

Move coprocessor_flush from the .exception.text section to the .text so
that it's reachable from the rest of the kernel with call8.

Cc: stable@vger.kernel.org
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit a3be911a5feed914233ec2fdc23b0103e616a142
bugzilla: 51779

--------------------------------

commit 7b9acbb6 upstream.

If a uaccess (e.g. get_user()) triggers a fault and there's a
fault signal pending, the handler will return to the uaccess without
having performed a uaccess fault fixup, and so the CPU will immediately
execute the uaccess instruction again, whereupon it will livelock
bouncing between that instruction and the fault handler.

https://lore.kernel.org/lkml/20210121123140.GD48431@C02TD0UTHF1T.local/

Cc: stable@vger.kernel.org
Reported-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit bcd7999c03ed4617dedcf9b2ad09a6e7f7cf5150
bugzilla: 51779

--------------------------------

commit 417eadfd upstream.

The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: NJeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210330114428.40490-1-jeremy.szu@canonical.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.28
commit ee58eee4501f9053d23aa073fc5931569f5cec6b
bugzilla: 51779

--------------------------------

commit e54f30be upstream.

We found the alc_update_headset_mode() is not called on some machines
when unplugging the headset, as a result, the mode of the
ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type
is not cleared, if users plug a differnt type of headset next time,
the determine_headset_type() will not be called and the audio jack is
set to the headset type of previous time.

On the Dell machines which connect the dmic to the PCH, if we open
the gnome-sound-setting and unplug the headset, this issue will
happen. Those machines disable the auto-mute by ucm and has no
internal mic in the input source, so the update_headset_mode() will
not be called by cap_sync_hook or automute_hook when unplugging, and
because the gnome-sound-setting is opened, the codec will not enter
the runtime_suspend state, so the update_headset_mode() will not be
called by alc_resume when unplugging. In this case the
hp_automute_hook is called when unplugging, so add
update_headset_mode() calling to this function.

Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>