The default values of HARDIRQ_BITS and PREEMPT_BITS in common code leads to
build failure:

In file included from include/linux/interrupt.h:12,
                from include/linux/kernel_stat.h:8,
                from arch/blackfin/kernel/asm-offsets.c:32:
include/linux/hardirq.h:66:2: error: #error PREEMPT_ACTIVE is too low!

So until that gets resolved, just declare our own default value again.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Check that the result of kmalloc is not NULL before passing it to other
functions.

In the first two cases, the new code returns -ENOMEM, which seems
compatible with what is done for similar functions for other architectures.

In the last two cases, the new code fails silently, ie just returns,
because the function has void return type.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression *x;
identifier f;
constant char *C;
@@

x = \(kmalloc\|kcalloc\|kzalloc\)(...);
... when != x == NULL
    when != x != NULL
    when != (x || ...)
(
kfree(x)
|
f(...,C,...,x,...)
|
*f(...,x,...)
|
*x->f
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The Blackfin SMP port was missing CPLB entries for Core B on-chip L1 SRAM
regions.  Any code that attempted to use these would wrongly crash due to
a CPLB miss.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Similar to anomaly 05000281 but not as bad, we cannot return to the
instruction causing a fault otherwise we'll trigger a second false
exception.  The system can still recover, but it isn't correct.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores
always run at the same CCLK.  In addition, the current implementation has
flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the
global kernel loops_per_jiffy and not the per_cpu one.  So punt all of the
per-cpu handling and go back to the global shared one.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Change the bfin_gpio_pm_hibernate_restore() function to:
1) AND restored DATA with DIR (not OR) to get correct final state
2) Restore DATA before setting DIR to avoid glitches
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The AD7142 add-on card hooks the IRQ line up to PG5, not PF5.
Signed-off-by: NBarry Song <barry.song@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The interrupt context save logic incorrectly stored the address of the
IPEND register rather than its value due to a missing dereference.  While
we're here, also enable this code for all kernel debugging scenarios and
not just when KGDB is enabled.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We already catch this anomaly at compile time, and the runtime version is
such that it ends up checking on all parts rather than just the ones that
might actually have it.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The sed used to rename the bfin-twi-lcd only replaced the first instance
rather than all which led to the resources not being enabled when the
driver was built as a module.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The Blackfin serial headers were inverting the CTS value leading to wrong
handling of the CTS line which broke CTS/RTS handling completely.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This anomaly only applies to the BF527-0.1, not the BF526-0.1, and not any
other revision of the BF527.  So make sure we don't go returning 0xffff
for other cases.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The early logic to locate a free DMA channel and then set it up was broken
in a few ways that only manifested itself when we needed to set up more
than 2 on chip SRAM regions (most board defaults setup 1 or 2).  First, we
checked the wrong status register (the destination gets updated, not the
source) and second, we did the ssync before rather than after resetting a
DMA config register.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than assume Core B is always run with caches turned on, let people
load into any of the on-chip memory regions.  It is their business how the
SRAM/Cache regions are utilized, so don't prevent them from being able to
load into them.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The code used in the Blackfin lshrdi3 utilizes gcc constructs.  However,
the structures declared don't line up with the code gcc generates, so
under certain optimizations, we get bad code and things crap out in fun
random ways.  So rather than trying to maintain different gcc definitions
ourselves, just use the ones available in gcclib.h.

URL: http://blackfin.uclinux.org/gf/tracker/5286Signed-off-by: NJie Zhang <jie.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Since we need to relocate the attached filesystem with the uClinux MTD map
(to handle some anomalies), we need to know its real filesize.  If we boot
a kernel without a filesystem actually attached, we end up blindly reading
and copying garbage (since there is no magic value to detect validity).
Often times this results in an early crash and no output.  So add a few
basic sanity checks before operating on things to catch the majority of
cases.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Previous unification code put the exception banner behind the "is oops"
logic when it should have been printed all the time.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Add missing anomaly workaround for anomaly 05000281 - we can't return to
instructions which cause hardware errors otherwise we trigger the error
again which means we go into an infinite loop of handling, returning, and
retriggering.  This work around confuses gdb when the error occurs as the
PC will seemed to have moved, so a better long term fix will need to be
figured out, but for now this is better than an infinite crash loop.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

There are no CONFIG_{BLK,CHR}_DEV_FLASH Kconfig options, and there is no
flash_probe() function, so not really sure what this code is all about.
Seems to be dead code that stretches way back to the start of the Blackfin
port.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Improve the assembly with a few explanatory comments and use symbolic
defines rather than numeric values for bit positions.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: add device ID for 82801JI sata controller
  drivers/ata: Move a dereference below a NULL test
  libata: implement and use HORKAGE_NOSETXFER, take#2
  libata: fix follow-up SRST failure path

Add device ID for Intel 82801JI SATA AHCI controller.
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

If the NULL test is necessary, then the dereference should be moved below
the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present.  The
device is SATA and simply skipping SETXFER works around the problem.
Implement ATA_HORKAGE_NOSETXFER and apply it to the device.

Reported by Moritz Rigler in the following thread.

  http://thread.gmane.org/gmane.linux.ide/36790

and by Lars in bko#9540.

Updated to whine and ignore NOSETXFER if PATA component is detected as
suggested by Alan Cox.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMoritz Rigler <linux-ide@momail.e4ward.com>
Reported-by: NLars <lars21ce@gmx.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

ata_eh_reset() was missing error return handling after follow-up SRST
allowing EH to continue the normal probing path after reset failure.
This was discovered while testing new WD 2TB drives which take longer
than 10 secs to spin up and cause the first follow-up SRST to time
out.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'i2c-for-2631-rc3' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c: Use resource_size
  i2c-davinci: behave with i2cdetect
  i2c-davinci: convert clock usage after clkdev conversion

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: free socket in error exit path
  dlm: fix plock use-after-free
  dlm: Fix uninitialised variable warning in lock.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Add new ConnectX EN PCI ID 0x6764
  mlx4_core: Handle multi-physical function devices

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Fix migration expiry check
  hrtimer: migration: do not check expiry time on current CPU

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix warning in pvclock.c
  x86, apic: Fix false positive section mismatch in numaq_32.c
  x86: Fix false positive section mismatch in es7000_32.c
  x86: Remove spurious printk level from segfault message

Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futexes: Fix infinite loop in get_futex_key() on huge page

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/function-profiler: do not free per cpu variable stat
  tracing/events: Move TRACE_SYSTEM outside of include guard

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines."
  skbuff.h: Fix comment for NET_IP_ALIGN
  drivers/net: using spin_lock_irqsave() in net_send_packet()
  NET: phy_device, fix lock imbalance
  gre: fix ToS/DiffServ inherit bug
  igb: gcc-3.4.6 fix
  atlx: duplicate testing of MCAST flag
  NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines.
  netdev: restore MTU change operation
  netdev: restore MAC address set and validate operations
  sit: fix regression: do not release skb->dst before xmit
  net: ip_push_pending_frames() fix
  net: sk_prot_alloc() should not blindly overwrite memory

Use the function resource_size, which reduces the chance of introducing
off-by-one errors in calculating the resource size.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Make i2c-davinci cope properly with "i2cdetect":  don't spew
syslog spam on perfectly normal behaviors, or respond to any
address other than the one reserved for the SMBus host.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

DaVinci core code has converted to the new clkdev API so
clock name strings are not needed.  Instead, just the a
'struct device' pointer is needed.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This reverts commit adeab1af.

As Alan Cox explained, the TTY layer changes that went recently
to get rid of the tty->low_latency stuff fixes this already,
and even for -stable it's the ->low_latency changes that should
go in to fix this, rather than this patch.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the correct function call for skb_reserve in the comment for
NET_IP_ALIGN.
Signed-off-by: NTobias Klauser <klto@zhaw.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

spin_unlock_irq() will enable interrupt in net_send_packet(),
this patch changes it to spin_lock_irqsave/spin_lock_irqrestore,
so that it doesn't enable interrupts when already disabled,
and netconsole would work properly over cs89x0/isa-skeleton.

Call trace:
netconsole write_msg()
{
 ...
 -> spin_lock_irqsave();
        -> netpoll_send_udp()
          -> netpoll_send_skb()
            -> net_send_packet()
              ->...

 -> spin_unlock_irqrestore();
 ...
}
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>