Convert to a common ocelot_port_txtstamp_request() for TX timestamp
request handling.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Free skb->cb usage in core driver and let device drivers decide to
use or not. The reason having a DSA_SKB_CB(skb)->clone was because
dsa_skb_tx_timestamp() which may set the clone pointer was called
before p->xmit() which would use the clone if any, and the device
driver has no way to initialize the clone pointer.

This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning
of dsa_slave_xmit(). Some new features in the future, like one-step
timestamp may need more bytes of skb->cb to use in
dsa_skb_tx_timestamp(), and p->xmit().
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was a waste to clone skb directly in dsa_skb_tx_timestamp().
For one-step timestamping, a clone was not needed. For any failure of
port_txtstamp (this may usually happen), the skb clone had to be freed.

So this patch moves skb cloning for tx timestamp out of dsa core, and
let drivers clone skb in port_txtstamp if they really need.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Tested-by: NKurt Kanzenbach <kurt@linutronix.de>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move ptp_classify_raw out of dsa core driver for handling tx
timestamp request. Let device drivers do this if they want.
Not all drivers want to limit tx timestamping for only PTP
packet.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Tested-by: NKurt Kanzenbach <kurt@linutronix.de>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check tx timestamp request in core driver at very beginning of
dsa_skb_tx_timestamp(), so that most skbs not requiring tx
timestamp just return. And drop such checking in device drivers.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Tested-by: NKurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

change 'privae' to 'private'
Signed-off-by: Nqhjindev <qhjin_dev@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The .serdes_get_lane op used the magic value 0xff to indicate a valid
SERDES lane and 0 signaled that a non-SERDES mode was set on the port.

Unfortunately, "0" is also a valid lane ID, so even when these ports
where configured to e.g. RGMII the driver would set them up as SERDES
ports.

- Replace 0xff with 0 to indicate a valid lane ID. The number is on
  the one hand just as arbitrary, but it is at least the first valid one
  and therefore less of a surprise.

- Follow the other .serdes_get_lane implementations and return -ENODEV
  in the case where no SERDES is assigned to the port.

Fixes: f5be107c ("net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185")
Signed-off-by: NTobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no real need for disabling autonigotiation in config_init().
Leave it enabled by default.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use 'hash_for_each_rcu' and 'hash_for_each_safe' instead of hand writing
them. This saves some lines of code, reduce indentation and improve
readability.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..).
If some error happens in emac_tx_fill_tpd(), the skb will be freed via
dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd().
But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len).

As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len,
thus my patch assigns skb->len to 'len' before the possible free and
use 'len' instead of skb->len later.

Fixes: b9b17deb ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: NLv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 8a12f883 ("net: hso: fix null-ptr-deref during tty device
unregistration") fixed the racy minor allocation reported by syzbot, but
introduced an unconditional NULL-pointer dereference on every disconnect
instead.

Specifically, the serial device table must no longer be accessed after
the minor has been released by hso_serial_tty_unregister().

Fixes: 8a12f883 ("net: hso: fix null-ptr-deref during tty device unregistration")
Cc: stable@vger.kernel.org
Cc: Anirudh Rayabharam <mail@anirudhrb.com>
Reported-by: NLeonardo Antoniazzi <leoanto@aruba.it>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NAnirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variable ret is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/davicom/dm9000.c:1527:5: warning: Value stored to
'ret' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variable prev_link and curr_link is being assigned a value from a
calculation however the variable is never read, so this redundant
variable can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/amd/pcnet32.c:2857:4: warning: Value stored to
'prev_link' is never read [clang-analyzer-deadcode.DeadStores].

drivers/net/ethernet/amd/pcnet32.c:2856:4: warning: Value stored to
'curr_link' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For UDP encapsultions, we only support the offloaded Vxlan port and
Geneve port.  All other ports included FOU and GUE are not supported so
we need to turn off TSO and checksum features.

v2: Reverse the check for supported UDP ports to be more straight forward.
Reviewed-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If firmware is capable, set the IFF_SUPP_NOFCS flag to support the
sockets option to transmit packets without FCS.  This is mainly used
for testing.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support VF device IDs used by the Hyper-V hypervisor.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the PF is no longer enforcing an assigned MAC address on a VF, the
VF needs to call bnxt_approve_mac() to tell the PF what MAC address it is
now using.  Otherwise it gets out of sync and the PF won't know what
MAC address the VF wants to use.  Ultimately the VF will fail when it
tries to setup the L2 MAC filter for the vnic.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move it before bnxt_update_vf_mac().  In the next patch, we need to call
bnxt_approve_mac() from bnxt_update_mac() under some conditions.  This
will avoid forward declaration.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is perfectly legal for the stack to query and configure VFs via PF
NDOs while the NIC is administratively down.  Remove the unnecessary
check for the PF to be in open state.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware previously only allowed promiscuous mode for VFs associated with
a default VLAN. It is now possible to enable promiscuous mode for a VF
having no VLAN configured provided that it is trusted. In such cases the
VF will see all packets received by the PF, irrespective of destination
MAC or VLAN.

Note, it is necessary to query firmware at the time of bnxt_promisc_ok()
instead of in bnxt_hwrm_func_qcfg() because the trusted status might be
altered by the PF after the VF has been configured. This check must now
also be deferred because the firmware call sleeps.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current code, the driver will not shutdown the link during
IFDOWN if there are still VFs sharing the port.  Newer firmware will
manage the link down decision when the port is shared by VFs, so
we can just call firmware to shutdown the port unconditionally and
let firmware make the final decision.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Copy the phy related feature flags from the firmware call
HWRM_PORT_PHY_QCAPS to this new field.  We can also remove the flags
field in the bnxt_test_info structure.  It's cleaner to have all PHY
related flags in one location, directly copied from the firmware.

To keep the BNXT_PHY_CFG_ABLE() macro logic the same, we need to make
a slight adjustment to check that it is a PF.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware reports link signalling mode for certain speeds. In these
cases, print the signalling modes in kernel log link up messages.
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.

This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.

v2: netdev wants non-standard line length
Signed-off-by: NJethro Beekman <kernel@jbeekman.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree probing to the IXP4xx ethernet
driver.

Add a platform data bool to tell us whether to
register an MDIO bus for the device or not, as well
as the corresponding NPE.

We need to drop the memory region request as part of
this since the OF core will request the memory for the
device.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver was using a really dated way of obtaining the
phy by printing a string and using it with phy_connect().
Switch to using more reasonable modern interfaces.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove DELL_TB_RX_AGG_BUG and LENOVO_MACPASSTHRU flags of rtl8152_flags.
They are only set when initializing and wouldn't be change. It is enough
to record them with variables.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the netvsc/VF binding logic only checks the PCI serial number.

The Microsoft Azure Network Adapter (MANA) supports multiple net_device
interfaces (each such interface is called a "vPort", and has its unique
MAC address) which are backed by the same VF PCI device, so the binding
logic should check both the MAC address and the PCI serial number.

The change should not break any other existing VF drivers, because
Hyper-V NIC SR-IOV implementation requires the netvsc network
interface and the VF network interface have the same MAC address.
Co-developed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Co-developed-by: NShachar Raindel <shacharr@microsoft.com>
Signed-off-by: NShachar Raindel <shacharr@microsoft.com>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In bnxt_rx_pkt(), the RX buffers are expected to complete in order.
If the RX consumer index indicates an out of order buffer completion,
it means we are hitting a hardware bug and the driver will abort all
remaining RX packets and reset the RX ring.  The RX consumer index
that we pass to bnxt_discard_rx() is not correct.  We should be
passing the current index (tmp_raw_cons) instead of the old index
(raw_cons).  This bug can cause us to be at the wrong index when
trying to abort the next RX packet.  It can crash like this:

 #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007
 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232
 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e
 #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978
 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0
 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e
 #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24
 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e
 #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12
 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5
    [exception RIP: bnxt_rx_pkt+237]
    RIP: ffffffffc0259cdd  RSP: ffff9bbcdf5c3d98  RFLAGS: 00010213
    RAX: 000000005dd8097f  RBX: ffff9ba4cb11b7e0  RCX: ffffa923cf6e9000
    RDX: 0000000000000fff  RSI: 0000000000000627  RDI: 0000000000001000
    RBP: ffff9bbcdf5c3e60   R8: 0000000000420003   R9: 000000000000020d
    R10: ffffa923cf6ec138  R11: ffff9bbcdf5c3e83  R12: ffff9ba4d6f928c0
    R13: ffff9ba4cac28080  R14: ffff9ba4cb11b7f0  R15: ffff9ba4d5a30000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

Fixes: a1b0e4e6 ("bnxt_en: Improve RX consumer index validity check.")
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variable result is being assigned a value from a calculation
however the variable is never read, so this redundant variable
can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1488:2:
warning: Value stored to 'pos' is never read
[clang-analyzer-deadcode.DeadStores].

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:876:3:
warning: Value stored to 'pos' is never read
[clang-analyzer-deadcode.DeadStores].

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:36:3:
warning: Value stored to 'start' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are spelling mistakes in netdev_dbg and netdev_dbg messages,
fix these.

Link: https://lore.kernel.org/r/20210415113050.1942333-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

There is an assignment to *netdev that is that can potentially be null
but the null check is checking netdev and not *netdev as intended. Fix
this by adding in the missing * operator.

Fixes: 85372578 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/r/20210415084723.1807935-1-colin.king@canonical.com
Addresses-Coverity: ("Dereference before null check")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Extended the SF table to cover additioanl SF id range of external
controller.

A user optionallly provides the external controller number when user
wants to create SF on the external controller.

An example on eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev

$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
  function:
    hw_addr 00:00:00:00:00:00

$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 external true splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Device has SF ids in two different contiguous ranges. One for the local
controller and second for the external controller's PF.

Each such range has its own maximum number of functions and base id.
To allocate SF from either of the range, prepare code to split into
range specific fields into its own structure.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Use helper routines for SF id and SF table allocation and free
so that subsequent patch can reuse it for multiple SF function
id range.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Vhca events on eswitch manager are received for all the functions on the
NIC, including for SFs of external host PF controllers.

While SF device handler is only interested in SF devices events related
to its own PF.
Hence, validate if the function belongs to self or not.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

SF ids in the device are in two different contiguous ranges. One for
the local controller and second for the external host controller.

Prepare code to handle multiple start function id by storing it in the
table.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Extended SF port attributes to have optional external flag similar to
PCI PF and VF port attributes.

External atttibute is required to generate unique phys_port_name when PF number
and SF number are overlapping between two controllers similar to SR-IOV
VFs.

When a SF is for external controller an example view of external SF
port and config sequence.

On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev

$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
  function:
    hw_addr 00:00:00:00:00:00

$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached

phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Supporting SF allocation is currently checked at two places:
(a) SF devlink port allocator and
(b) SF HW table handler.

Both layers are using HCA CAP to identify it using helper routine
mlx5_sf_supported() and mlx5_sf_max_functions().

Instead, rely on the HW table handler to check if SF is supported
or not.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Query SF vports count and base id of host PF from the firmware.

Account these ports in the total port calculation whenever it is non
zero.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>