- 22 9月, 2013 2 次提交
-
-
由 Nithin Sujir 提交于
This patch adds support for 57764, 57765, 57787, 57782 and 57786 devices. Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
For consistency with other register access functions, add shadow register access function of the type (register/val). Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2013 7 次提交
-
-
由 Maciej W. Rozycki 提交于
Revert damage caused by 43d620c8: .../declance.c: In function 'cp_to_buf': .../declance.c:347: warning: assignment from incompatible pointer type .../declance.c:348: warning: assignment from incompatible pointer type .../declance.c: In function 'cp_from_buf': .../declance.c:406: warning: assignment from incompatible pointer type .../declance.c:407: warning: assignment from incompatible pointer type Also add a `const' qualifier where applicable and adjust formatting. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrice Vilchez 提交于
All supported Micrel PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by: NPatrice Vilchez <patrice.vilchez@atmel.com> [b.brezillon@overkiz.com: adapt to newer kernel and generalize to other phys] Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: commit message modification] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
'usbpn_probe' is referenced only in this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NRémi Denis-Courmont <remi@remlab.net> Cc: Rémi Denis-Courmont <remi@remlab.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
Local symbols used only in this file are made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
Local symbols used only in this file are made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Ariel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
No function changes (s/\ \t/\t/g) Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
devm_iounmap is called automatically. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2013 4 次提交
-
-
由 Nikolay Aleksandrov 提交于
This bug was introduced by commit 7a163bfb ("netconsole: avoid a crash with multiple sysfs writers"). In store_enabled() we have the following sequence: acquire nt->mutex then rtnl, but in the netconsole netdev notifier we have rtnl then nt->mutex effectively leading to a deadlock. The NULL pointer dereference that the above commit tries to fix is actually due to another bug in netpoll_cleanup(). This is fixed by dropping the mutex from the netdev notifier as it's already protected by rtnl. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mikulas Patocka 提交于
The patch 136d8f37 broke the skge driver. Note this part of the patch: + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); The function skge_rx_setup modifies e->skb to point to the new skb. Thus, after this change, the new buffer, not the old, is returned to the networking stack. This bug is present in kernels 3.11, 3.11.1 and 3.12-rc1. The patch should be queued for 3.11-stable. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Reported-by: NMikulas Patocka <mpatocka@redhat.com> Reported-by: NVasiliy Glazov <vascom2@gmail.com> Tested-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ansis Atteka 提交于
If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: NAnsis Atteka <aatteka@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
Without this patch, if a frontend cycles through states Closing and Closed (which Windows frontends need to do) then the netdev will be destroyed and requires re-invocation of hotplug scripts to restore state before the frontend can move to Connected. Thus when udev is not in use the backend gets stuck in InitWait. With this patch, the netdev is left alone whilst the backend is still online and is only de-registered and freed just prior to destroying the vif (which is also nicely symmetrical with the netdev allocation and registration being done during probe) so no re-invocation of hotplug scripts is required. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2013 6 次提交
-
-
由 Daniel Vetter 提交于
Otherwise the system will burn even brighter and worse, leave the user wondering what's going on exactly. Since we already have a panic handler which will (try) to restore the entire fbdev console mode, we can just bail out. Inspired by a patch from Konstantin Khlebnikov. The callchain leading to this, cut&pasted from Konstantin's original patch: callstack: panic() bust_spinlocks(1) unblank_screen() vc->vc_sw->con_blank() fbcon_blank() fb_blank() info->fbops->fb_blank() drm_fb_helper_blank() drm_fb_helper_dpms() drm_modeset_lock_all() mutex_lock(&dev->mode_config.mutex) Note that the entire locking in the fb helper around panic/sysrq and kdbg is ... non-existant. So we have a decent change of blowing up everything. But since reworking this ties in with funny concepts like the fbdev notifier chain or the impressive things which happen around console_lock while oopsing, I'll leave that as an exercise for braver souls than me. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Prarit Bhargava 提交于
Fix uninitialized warning. drivers/gpu/drm/ttm/ttm_object.c: In function ‘ttm_base_object_lookup’: drivers/gpu/drm/ttm/ttm_object.c:213:10: error: ‘base’ may be used uninitialized in this function [-Werror=maybe-uninitialized] kref_put(&base->refcount, ttm_release_base); ^ drivers/gpu/drm/ttm/ttm_object.c:221:26: note: ‘base’ was declared here struct ttm_base_object *base; Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Reviewed-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
After a vmalloc failure in ttm_dma_tt_alloc_page_directory(), ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up inside the driver's unpopulate() hook when populate() has never yet been called. On nouveau, the first issue to be hit because of this is that dma_address[] may be a NULL pointer. After working around this, ttm_pool_unpopulate() may potentially hit the same issue with the pages[] array. It seems to make more sense to avoid calling unpopulate on already unpopulated TTMs than to add checks to all the implementations. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Michael Chan 提交于
commit 104a43ed cnic: Use CHIP_NUM macros from bnx2x.h changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE is supported or not. There is another place in cnic that is still using the old method to determine if FCoE is supported or not. The 2 methods may not yield the same result after the network interface is brought down and up. This will cause the crash as cnic_bnx2x_service_kcq() will access the uninitialized cp->kcq2. The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code to remove the old method as it is no longer needed. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
commit b9871bcf bnx2x: VF RSS support - PF side changed the configuration of the doorbell HW and it broke iSCSI and FCoE. We fix this by making compatible changes to the doorbell address in bnx2i and bnx2fc. For the userspace driver, we need to pass a modified CID so that the existing userspace driver will calculate the correct doorbell address and continue to work. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2013 5 次提交
-
-
由 Oleg Nesterov 提交于
Starting from v3.10 (probably commit f91e2590: "tty: Signal foreground group processes in hangup") disassociate_ctty() sends SIGCONT if tty && on_exit. This breaks LSB test-suite, in particular test8 in _exit.c and test40 in sigcon5.c. Put the "!on_exit" check back to restore the old behaviour. Review by Peter Hurley: "Yes, this regression was introduced by me in that commit. The effect of the regression is that ptys will receive a SIGCONT when, in similar circumstances, ttys would not. The fact that two test vectors accidentally tripped over this regression suggests that some other apps may as well. Thanks for catching this" Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NKarel Srot <ksrot@redhat.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sridhar Samudrala 提交于
Commit afbd8bae vxlan: add implicit fdb entry for default destination creates an implicit fdb entry for default destination. This results in an invalid fdb entry if default destination is not specified. For ex: ip link add vxlan1 type vxlan id 100 creates the following fdb entry 00:00:00:00:00:00 dev vxlan1 dst 0.0.0.0 self permanent This patch fixes this issue by creating an fdb entry only if a valid default destination is specified. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Avinash Kumar 提交于
clears following warnings : WARNING: Use include <linux/io.h> instead of <asm/io.h> WARNING: Use include <linux/uaccess.h> instead of <asm/uaccess.h> Signed-off-by: NAvinash Kumar <avi.kp.137@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
It has recently turned up that we have a number of long standing bugs in the network stack cleanup code with use of the loopback device after it has been freed that have not turned up because in most cases the storage allocated to the loopback device is not reused, when those accesses happen. Set looback_dev to NULL to trigger oopses instead of silent data corrupt when we hit this class of bug. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ezequiel Garcia 提交于
There's no need to enclose this code within idef CONFIG_OF, because the OF framework provides no-op stubs if CONFIG_OF=n. Cc: devicetree@vger.kernel.org Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 17 9月, 2013 14 次提交
-
-
由 Ben Skeggs 提交于
TTM calls the destructor on its own already... Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Aaro Koskinen 提交于
Enable only those interrupts that we can handle & acknowledge in the interrupt handler. At least on EdgeRouter Lite, the hardware may occasionally interrupt with some error condition when the physical link status changes frequently. Since the interrupt condition is not acked properly, this leads to the following warning and the IRQ gets disabled completely: [ 41.324700] eth0: Link down [ 44.324721] eth0: 1000 Mbps Full duplex, port 0, queue 0 [ 44.885590] irq 117: nobody cared (try booting with the "irqpoll" option) [ 44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8 [ 44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000 ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000 ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7 ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000 0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18 ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174 ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000 ... [ 44.968408] Call Trace: [ 44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80 [ 44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8 [ 44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108 [ 44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0 [ 44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200 [ 44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90 [ 45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148 [ 45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50 [ 45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30 [ 45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8 [ 45.025958] [ 45.027451] handlers: [ 45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt [ 45.035397] Disabling IRQ #117 [ 45.038742] Port 0 receive error code 13, packet dropped [ 46.324719] eth0: Link down [ 48.324733] eth0: 1000 Mbps Full duplex, port 0, queue 0 Reported-by: N"Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NDavid Daney <david.daney@cavium.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5810/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aaro Koskinen 提交于
Remove skb allocation failure warnings. They will trigger a page allocation warning already. Also, one of the warnings was not ratelimited, causing the box to lock up under heavy traffic & low memory. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NDavid Daney <david.daney@cavium.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/5811/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aaro Koskinen 提交于
We should count also dropped packets, otherwise the NAPI handler may end up running too long. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5809/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Fabio Porcedda 提交于
Use USB_DEVICE_AND_INTERFACE_INFO and USB_VENDOR_AND_INTERFACE_INFO macros to reduce boilerplate. Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Porcedda 提交于
Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Porcedda 提交于
Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com> Cc: <stable@vger.kernel.org> # 3.0+ as far back as it applies cleanly Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafał Miłecki 提交于
This is important patch for new devices that support unaligned addressing. That devices suffer from the backward-compatibility bug in DMA engine. In theory we should be able to use old mechanism, but in practice DMA address seems to be randomly copied into status register when hardware reaches end of a ring. This breaks reading slot number from status register and we can't use DMA anymore. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hauke Mehrtens 提交于
Without this patch it is impossible to read et_swtype, because the 1 byte space is needed for the terminating null byte. The max expected value is 0xF, so now it should be possible to read decimal form ("15") and hex form ("0xF"). Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafał Miłecki 提交于
Some devices (BCM4749, BCM5357, BCM53572) have internal switch that requires initialization. We already have code for this, but because of the typo in code it was never working. This resulted in network not working for some routers and possibility of soft-bricking them. Use correct bit for switch initialization and fix typo in the define. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olaf Hering 提交于
Use separate table for alias entries in the ehea module, otherwise the probe() function will operate on the separate ports instead of the lhea-"root" entry of the device-tree Addresses https://bugzilla.novell.com/show_bug.cgi?id=435215 [ Thadeu notes that: "... this issue might happen with the generation of initrd, when the scripts check for /sys/class/net/eth0/device/modalias, which links to the port device at /sys/devices/ibmebus/23c00400.lhea/port0/" ] Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NOlaf Hering <ohering@suse.com> Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2013 2 次提交
-
-
由 Wei Yang 提交于
When driver registration fails, we need to clean up the resources allocated before. cxgb4 missed to destroy the workqueue allocated at the very beginning. This patch destroies the workqueue when registration fails. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antonio Alecrim Jr 提交于
Signed-off-by: NAntonio Alecrim Jr <antonio.alecrim@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-