This fixes the following:

  CC [M]  drivers/platform/x86/eeepc-wmi.o
drivers/platform/x86/eeepc-wmi.c:322: warning: initialization from incompatible pointer type
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some of the IBM servers that are supported by ibm_rtl
can run in both Legacy mode (BIOS) and in UEFI mode.
When running in UEFI mode, it is possible that the
EBDA table exists but cannot be mapped and reports
errors.  We need to make sure that by default we don't
try to probe the machines if they are running in UEFI
mode.
Signed-off-by: NVernon Mauery <vernux@us.ibm.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Allow all IBM machines to pass the DMI check so that we
don't have to add them one by one to the driver.  Any IBM
machine that has the _RTL_ table in the EBDA will work.
Signed-off-by: NVernon Mauery <vernux@us.ibm.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Based on cpufv text from sysfs-platform-eeepc-laptop that
has almost same behavior.
Signed-off-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NCorentin Chary <corentincj@iksaif.net>

A lone FN key press on a Toshiba Portégé R700 without another key in
conjunction results in an ACPI event and a spurious error message on
the console.

Add a key entry to map this event to a KEY_FN keypress. This prevents
the console message.
Signed-off-by: NJon Dowland <jmtd@debian.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Fix printk format warning:

drivers/platform/x86/ibm_rtl.c:305:warning: format '%#llx' expects type 'long long unsigned int', but argument 2 has type 'phys_addr_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Vernon Mauery <vernux@us.ibm.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (41 commits)
  ALSA: hda - Identify more variants for ALC269
  ALSA: hda - Fix wrong ALC269 variant check
  ALSA: hda - Enable jack sense for Thinkpad Edge 11
  ALSA: Revert "ALSA: hda - Fix switching between dmic and mic using the same mux on IDT/STAC"
  ALSA: hda - Fixed ALC887-VD initial error
  ALSA: atmel - Fix the return value in error path
  ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J
  ALSA: snd-atmel-abdac: test wrong variable
  ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timer
  ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup
  ALSA: sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdata
  ALSA: sound/core/pcm_lib.c: Remove unnecessary semicolons
  ALSA: sound/ppc: Use printf extension %pR for struct resource
  ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls
  ASoC: uda134x - set reg_cache_default to uda134x_reg
  ASoC: Add support for MAX98089 CODEC
  ASoC: davinci: fixes for multi-component
  ASoC: Fix register cache setup WM8994 for multi-component
  ASoC: Fix dapm_seq_compare() for multi-component
  ASoC: RX1950: Fix hw_params function
  ...

* 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: implement XENMEM_machphys_mapping
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  of/phylib: Use device tree properties to initialize Marvell PHYs.
  phylib: Add support for Marvell 88E1149R devices.
  phylib: Use common page register definition for Marvell PHYs.
  qlge: Fix incorrect usage of module parameters and netdev msg level
  ipv6: fix missing in6_ifa_put in addrconf
  SuperH IrDA: correct Baud rate error correction
  atl1c: Fix hardware type check for enabling OTP CLK
  net: allow GFP_HIGHMEM in __vmalloc()
  bonding: change list contact to netdev@vger.kernel.org
  e1000: fix screaming IRQ

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: EHCI: fix obscure race in ehci_endpoint_disable
  USB: gadget: AT91: fix typo in atmel_usba_udc driver
  USB: isp1362-hcd - fix section mismatch warning
  USB: EHCI: AMD periodic frame list table quirk
  USB: OTG: langwell_otg: fix up some sysfs attribute permissions
  USB: misc: usbsevseg: fix up some sysfs attribute permissions
  USB: misc: usbled: fix up some sysfs attribute permissions
  USB: misc: trancevibrator: fix up a sysfs attribute permission
  USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions
  USB: storage: sierra_ms: fix sysfs file attribute
  USB: ehci: fix debugfs 'lpm' permissions
  USB: atm: ueagle-atm: fix up some permissions on the sysfs files
  xhci: Fix command ring replay after resume.
  xHCI: fix wMaxPacketSize mask
  xHCI: release spinlock when setup interrupt
  xhci: Remove excessive printks with shared IRQs.

Merge branch 'for-2.6.37' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc

Give more correct chip names for ALC269-variant codecs.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The refactoring commit d433a678
    ALSA: hda - Optimize the check of ALC269 codec variants
introduced a wrong check for ALC269-vb type.  This patch corrects it.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk entry for Thinkpad Edge 11 as well as other TP Edge models.
Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit f41cc2a8.

The patch broke the digital mic pin handling wrongly.
Reference: bko#23162
	https://bugzilla.kernel.org/show_bug.cgi?id=23162Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* upstream/core:
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen: implement XENMEM_machphys_mapping

* upstream/xenfs:
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code

* upstream/evtchn:
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  xen/evtchn: ports start enabled
  xen/evtchn: dynamically allocate port_user array
  xen/evtchn: track enabled state for each port

When we allocate a vector for MSI/MSI-X we save away the PIRQ, and the
vector value. When we unmap (de-allocate) the MSI/MSI-X vector(s) we
need to provide the PIRQ and the vector value. What we did instead
was to provide the GSI (which was zero) and the vector value, and we
got these unhappy error messages:

(XEN) irq.c:1575: dom0: pirq 0 not mapped
[    7.733415] unmap irq failed -22

This patches fixes this and we use the PIRQ value instead of the GSI
value.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This patch is based off "xen dom0: Set up basic IO permissions for dom0."
by Juan Quintela <quintela@redhat.com>.

On AMD machines when we boot the kernel as Domain 0 we get this nasty:

mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.1-101116  x86_64  debug=y  Not tainted ]----
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff8130271b>]
(XEN) RFLAGS: 0000000000000282   EM: 1   CONTEXT: pv guest
(XEN) rax: 000000008000c068   rbx: ffffffff8186c680   rcx: 0000000000000068
(XEN) rdx: 0000000000000cf8   rsi: 000000000000c000   rdi: 0000000000000000
(XEN) rbp: ffffffff81801e98   rsp: ffffffff81801e50   r8:  ffffffff81801eac
(XEN) r9:  ffffffff81801ea8   r10: ffffffff81801eb4   r11: 00000000ffffffff
(XEN) r12: ffffffff8186c694   r13: ffffffff81801f90   r14: ffffffffffffffff
(XEN) r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) cr3: 0000000221803000   cr2: 0000000000000000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81801e50:

RIP points to read_pci_config() function.

The issue is that we don't set IO permissions for the Linux kernel early enough.

The call sequence used to be:

    xen_start_kernel()
	x86_init.oem.arch_setup = xen_setup_arch;
        setup_arch:
           - early_cpu_init
               - early_init_amd
                  - read_pci_config
           - x86_init.oem.arch_setup [ xen_arch_setup ]
               - set IO permissions.

We need to set the IO permissions earlier on, which this patch does.
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Some aspects of PHY initialization are board dependent, things like
indicator LED connections and some clocking modes cannot be determined
by probing.  The dev_flags element of struct phy_device can be used to
control these things if an appropriate value can be passed from the
Ethernet driver.  We run into problems however if the PHY connections
are specified by the device tree.  There is no way for the Ethernet
driver to know what flags it should pass.

If we are using the device tree, the struct phy_device will be
populated with the device tree node corresponding to the PHY, and we
can extract extra configuration information from there.

The next question is what should the format of that information be?
It is highly device specific, and the device tree representation
should not be tied to any arbitrary kernel defined constants.  A
straight forward representation is just to specify the exact bits that
should be set using the "marvell,reg-init" property:

      phy5: ethernet-phy@5 {
        reg = <5>;
        compatible = "marvell,88e1149r";
        marvell,reg-init =
                /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */
                <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */
                /* mix %:0, led[0123]:drive low off hiZ */
                <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */
                /* default blink periods. */
                <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */
                /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */
                <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */
      };

      phy6: ethernet-phy@6 {
        reg = <6>;
        compatible = "marvell,88e1118";
        marvell,reg-init =
                /* Fix rx and tx clock transition timing */
                <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
                /* Adjust LED drive. */
                <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
                /* irq, blink-activity, blink-link */
                <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
      };

The Marvell PHYs have a page select register at register 22 (0x16), we
can specify any register by its page and register number.  These are
the first and second word.  The third word contains a mask to be ANDed
with the existing register value, and the fourth word is ORed with the
result to yield the new register value.  The new marvell_of_reg_init
function leaves the page select register unchanged, so a call to it
can be dropped into the .config_init functions without unduly
affecting the state of the PHY.

If CONFIG_OF_MDIO is not set, there is no of_node, or no
"marvell,reg-init" property, the PHY initialization is unchanged.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY.  The
.config_aneg function can be shared with 88E1118, but it needs its own
.config_init.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The definition of the Marvell PHY page register is not specific to
88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
throughout.
Suggested-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver appears to be mistaking the permission field with default value
in the case of debug and qlge_irq_type.

Driver is also passing debug as a bitmask into netif_msg_init()
which wants a number of bits.  Ron Mercer suggests we should
change this to pass in -1 so the defaults get used instead,
which makes the default much less verbose.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NSonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix ref count bug introduced by

commit 2de79570
Author: Lorenzo Colitti <lorenzo@google.com>
Date:   Wed Oct 27 18:16:49 2010 +0000

ipv6: addrconf: don't remove address state on ifdown if the address
is being kept

Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr
refcnt correctly with in6_ifa_put().
Reported-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ALC887-VD is like ALC888-VD. It can not be initialized as ALC882.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit c0763e68
    ALSA: snd-atmel-abdac: test wrong variable
the return value via PTR_ERR() had to be fixed as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/677652

The original reporter states that, in 2.6.35, headphones do not appear
to work, nor does inserting them mute the A52J's onboard speakers.  Upon
inspecting the codec dump, it appears that the newly committed hp-laptop
quirk will suffice to enable this basic functionality.  Testing was done
with an alsa-driver build from 2010-11-21.

Reported-and-tested-by: Joan Creus
Cc: <stable@kernel.org> [2.6.35+]
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After clk_get() pclk is checked second time instead of sample_clk check.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

. Fix PulseAudio "ALSA driver bug" issue
  (if we have two alternated areas within a 64k DMA buffer, then max
  period size should obviously be 32k only).
  Back references:
   http://pulseaudio.org/wiki/AlsaIssues
   http://fedoraproject.org/wiki/Features/GlitchFreeAudio
. In stop timer function, need to supply ACK in the timer control byte.
. Minor log output correction

When I did my first PA testing recently, the period size bug resulted
in quite precisely observeable half-period-based playback distortion.

PA-based operation is quite a bit more underrun-prone (despite its
zero-copy optimizations etc.) than raw ALSA with this rather spartan
sound hardware implementation on my puny Athlon.

Note that even with this patch, azt3328 still doesn't work for both
cases yet, PA tsched=0 and tsched
(on tsched=0 it will playback tiny fragments of periods, leading to tiny
stuttering sounds with some pauses in between, whereas with
timer-scheduled operation playback works fine - minus some quite increased
underrun trouble on PA vs. ALSA, that is).
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/677830

The original reporter states that the subwoofer does not mute when
inserting headphones.  We need an entry for his machine's SSID in the
subwoofer pin fixup list, so add it there (verified using hda_analyzer).

Reported-and-tested-by: i-NoD
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Using %pR standardizes the struct resource output.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/669279

The original reporter states: "The Master mixer does not change the
volume from the headphone output (which is affected by the headphone
mixer). Instead it only seems to control the on-board speaker volume.
This confuses PulseAudio greatly as the Master channel is merged into
the volume mix."

Fix this symptom by applying the hp_only quirk for the reporter's SSID.
The fix is applicable to all stable kernels.
Reported-and-tested-by: NBen Gamari <bgamari@gmail.com>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It looks to me as if the second value of rate_err_array is intended
to be a decimal 625. However, with a leading 0 it becomes an octal
constant, and as such evaluates to a decimal 405.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 496c185c "atl1c: Add support
for Atheros AR8152 and AR8152" added the condition:

             if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b)

for enabling OTP CLK, and the condition:

             if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)

for disabling OTP CLK.  Since the two previously defined hardware
types are athr_l1c and athr_l2c, the latter condition appears to be
the correct one.  Change the former to match.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We forgot to use __GFP_HIGHMEM in several __vmalloc() calls.

In ceph, add the missing flag.

In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is
cleaner and allows using HIGHMEM pages as well.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bonding-devel@lists.sourceforge.net seems only receive spam
and discussion seems to already occur on netdev@vger.kernel.org.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>