- 05 7月, 2015 6 次提交
-
-
由 Al Viro 提交于
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 01 7月, 2015 4 次提交
-
-
由 Eric Dumazet 提交于
__fget() does lockless fetch of pointer from the descriptor table, attempts to grab a reference and treats "it was already zero" as "it's already gone from the table, we just hadn't seen the store, let's fail". Unfortunately, that breaks the atomicity of dup2() - __fget() might see the old pointer, notice that it's been already dropped and treat that as "it's closed". What we should be getting is either the old file or new one, depending whether we come before or after dup2(). Dmitry had following test failing sometimes : int fd; void *Thread(void *x) { char buf; int n = read(fd, &buf, 1); if (n != 1) exit(printf("read failed: n=%d errno=%d\n", n, errno)); return 0; } int main() { fd = open("/dev/urandom", O_RDONLY); int fd2 = open("/dev/urandom", O_RDONLY); if (fd == -1 || fd2 == -1) exit(printf("open failed\n")); pthread_t th; pthread_create(&th, 0, Thread, 0); if (dup2(fd2, fd) == -1) exit(printf("dup2 failed\n")); pthread_join(th, 0); if (close(fd) == -1) exit(printf("close failed\n")); if (close(fd2) == -1) exit(printf("close failed\n")); printf("DONE\n"); return 0; } Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Dumazet 提交于
Mateusz Guzik reported : Currently obtaining a new file descriptor results in locking fdtable twice - once in order to reserve a slot and second time to fill it. Holding the spinlock in __fd_install() is needed in case a resize is done, or to prevent a resize. Mateusz provided an RFC patch and a micro benchmark : http://people.redhat.com/~mguzik/pipebench.c A resize is an unlikely operation in a process lifetime, as table size is at least doubled at every resize. We can use RCU instead of the spinlock. __fd_install() must wait if a resize is in progress. The resize must block new __fd_install() callers from starting, and wait that ongoing install are finished (synchronize_sched()) resize should be attempted by a single thread to not waste resources. rcu_sched variant is used, as __fd_install() and expand_fdtable() run from process context. It gives us a ~30% speedup using pipebench on a dual Intel(R) Xeon(R) CPU E5-2696 v2 @ 2.50GHz Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMateusz Guzik <mguzik@redhat.com> Acked-by: NMateusz Guzik <mguzik@redhat.com> Tested-by: NMateusz Guzik <mguzik@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Wang YanQing 提交于
Execution of get_anon_bdev concurrently and preemptive kernel all could bring race condition, it isn't enough to check dev against its upper limitation with equality operator only. This patch fix it. Signed-off-by: NWang YanQing <udknight@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Carlos Maiolino 提交于
currently, get_next_ino() is able to create inodes with inode number = 0. This have a bad impact in the filesystems relying in this function to generate inode numbers. While there is no problem at all in having inodes with number 0, userspace tools which handle file management tasks can have problems handling these files, like for example, the impossiblity of users to delete these files, since glibc will ignore them. So, I believe the best way is kernel to avoid creating them. This problem has been raised previously, but the old thread didn't have any other update for a year+, and I've seen too many users hitting the same issue regarding the impossibility to delete files while using filesystems relying on this function. So, I'm starting the thread again, with the same patch that I believe is enough to address this problem. Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 30 6月, 2015 1 次提交
-
-
由 Al Viro 提交于
The only caller that cares about its return value can just as easily pick it from nd->root_seq itself. We used to just calculate it and return to caller, but these days we are storing it in nd->root_seq in all cases. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 6月, 2015 15 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Fabian Frederick 提交于
dir_pages was declared in a lot of filesystems. Use newly dir_pages() from pagemap.h Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Fabian Frederick 提交于
That function was declared in a lot of filesystems to calculate directory pages. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Rasmus Villemoes 提交于
list_entry is just a wrapper for container_of, but it is arguably wrong (and slightly confusing) to use it when the pointed-to struct member is not a struct list_head. Use container_of directly instead. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
-
由 Jan Kara 提交于
Currently XFS calls file_remove_privs() without holding i_mutex. This is wrong because that function can end up messing with file permissions and file capabilities stored in xattrs for which we need i_mutex held. Fix the problem by grabbing iolock exclusively when we will need to change anything in permissions / xattrs. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Comment in include/linux/security.h says that ->inode_killpriv() should be called when setuid bit is being removed and that similar security labels (in fact this applies only to file capabilities) should be removed at this time as well. However we don't call ->inode_killpriv() when we remove suid bit on truncate. We fix the problem by calling ->inode_need_killpriv() and subsequently ->inode_killpriv() on truncate the same way as we do it on file write. After this patch there's only one user of should_remove_suid() - ocfs2 - and indeed it's buggy because it doesn't call ->inode_killpriv() on write. However fixing it is difficult because of special locking constraints. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Provide function telling whether file_remove_privs() will do anything. Currently we only have should_remove_suid() and that does something slightly different. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
file_remove_suid() is a misnomer since it removes also file capabilities stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells something else than whether file_remove_suid() call is necessary which leads to bugs. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
file_remove_suid() could mistakenly set S_NOSEC inode bit when root was modifying the file. As a result following writes to the file by ordinary user would avoid clearing suid or sgid bits. Fix the bug by checking actual mode bits before setting S_NOSEC. CC: stable@vger.kernel.org Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
If posix_acl_create() returns an error code then "*acl" and "*default_acl" can be uninitialized or point to freed memory. This is a dangerous thing to do. For example, it causes a problem in ocfs2_reflink(): fs/ocfs2/refcounttree.c:4327 ocfs2_reflink() error: potentially using uninitialized 'default_acl'. I've re-written this so we set the pointers to NULL at the start. I've added a temporary "clone" variable to hold the value of "*acl" until end. Setting them to NULL means means we don't need the "no_acl" label. We may as well remove the "apply_umask" stuff forward and remove that label as well. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Turn seq_path(..., &file->f_path, ...); into seq_file_path(..., file, ...); Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Turn d_path(&file->f_path, ...); into file_path(file, ...); Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 19 6月, 2015 2 次提交
-
-
由 David Howells 提交于
Make file->f_path always point to the overlay dentry so that the path in /proc/pid/fd is correct and to ensure that label-based LSMs have access to the overlay as well as the underlay (path-based LSMs probably don't need it). Using my union testsuite to set things up, before the patch I see: [root@andromeda union-testsuite]# bash 5</mnt/a/foo107 [root@andromeda union-testsuite]# ls -l /proc/$$/fd/ ... lr-x------. 1 root root 64 Jun 5 14:38 5 -> /a/foo107 [root@andromeda union-testsuite]# stat /mnt/a/foo107 ... Device: 23h/35d Inode: 13381 Links: 1 ... [root@andromeda union-testsuite]# stat -L /proc/$$/fd/5 ... Device: 23h/35d Inode: 13381 Links: 1 ... After the patch: [root@andromeda union-testsuite]# bash 5</mnt/a/foo107 [root@andromeda union-testsuite]# ls -l /proc/$$/fd/ ... lr-x------. 1 root root 64 Jun 5 14:22 5 -> /mnt/a/foo107 [root@andromeda union-testsuite]# stat /mnt/a/foo107 ... Device: 23h/35d Inode: 40346 Links: 1 ... [root@andromeda union-testsuite]# stat -L /proc/$$/fd/5 ... Device: 23h/35d Inode: 40346 Links: 1 ... Note the change in where /proc/$$/fd/5 points to in the ls command. It was pointing to /a/foo107 (which doesn't exist) and now points to /mnt/a/foo107 (which is correct). The inode accessed, however, is the lower layer. The union layer is on device 25h/37d and the upper layer on 24h/36d. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Call ovl_drop_write() earlier in ovl_dentry_open() before we call vfs_open() as we've done the copy up for which we needed the freeze-write lock by that point. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 6月, 2015 2 次提交
-
-
由 Al Viro 提交于
-
由 Fabian Frederick 提交于
Add last missing line in commit "cdd9eefd" ("fs/ufs: restore s_lock mutex") Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 6月, 2015 5 次提交
-
-
由 Al Viro 提交于
See "ext2: Do not update mtime of a moved directory" (and followup in "ext2: fix unbalanced kmap()/kunmap()") for background; this is UFS equivalent - the same problem exists here. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
We are already serialized by ->i_mutex and operations on different directories are independent. These calls are just rudiments of blind BKL conversion and they should've been removed back then. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Commit e4502c63 (ufs: deal with nfsd/iget races) made ufs create inodes with I_NEW flag set. However ufs_mkdir() never cleared this flag. Thus if someone ever tried to lookup the directory by inode number, he would deadlock waiting for I_NEW to be cleared. Luckily this mostly happens only if the filesystem is exported over NFS since otherwise we have the inode attached to dentry and don't look it up by inode number. In rare cases dentry can get freed without inode being freed and then we'd hit the deadlock even without NFS export. Fix the problem by clearing I_NEW before instantiating new directory inode. Fixes: e4502c63Reported-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Commit e4502c63 (ufs: deal with nfsd/iget races) introduced unlock_new_inode() call into ufs_add_nondir(). However that function gets called also from ufs_link() which hands it already initialized inode and thus unlock_new_inode() complains. The problem is harmless but annoying. Fix the problem by opencoding necessary stuff in ufs_link() Fixes: e4502c63Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Fabian Frederick 提交于
Commit 0244756e ("ufs: sb mutex merge + mutex_destroy") generated deadlocks in read/write mode on mkdir. This patch partially reverts it keeping fixes by Andrew Morton and mutex_destroy() [AV: fixed a missing bit in ufs_remount()] Signed-off-by: NFabian Frederick <fabf@skynet.be> Reported-by: NIan Campbell <ian.campbell@citrix.com> Suggested-by: NJan Kara <jack@suse.cz> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Roger Pau Monne <roger.pau@citrix.com> Cc: Ian Jackson <Ian.Jackson@eu.citrix.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 6月, 2015 2 次提交
-
-
由 Fabian Frederick 提交于
This reverts commit 9ef7db7f ("ufs: fix deadlocks introduced by sb mutex merge") That patch tried to solve commit 0244756e ("ufs: sb mutex merge + mutex_destroy") which is itself partially reverted due to multiple deadlocks. Signed-off-by: NFabian Frederick <fabf@skynet.be> Suggested-by: NJan Kara <jack@suse.cz> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Roger Pau Monne <roger.pau@citrix.com> Cc: Ian Jackson <Ian.Jackson@eu.citrix.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 29 5月, 2015 1 次提交
-
-
由 Al Viro 提交于
when we find that a child has died while we'd been trying to ascend, we should go into the first live sibling itself, rather than its sibling. Off-by-one in question had been introduced in "deal with deadlock in d_walk()" and the fix needs to be backported to all branches this one has been backported to. Cc: stable@vger.kernel.org # 3.2 and later Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 5月, 2015 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
these guys are always declared next to each other; might as well put the former (pointer to previous instance) into the latter and simplify the calling conventions for {set,restore}_nameidata() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-