Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 8月, 2019 30 次提交
    • J
      net: stmmac: Add Split Header support and enable it in XGMAC cores · 67afd6d1
      由 Jose Abreu 提交于 
      Add the support for Split Header feature in the RX path and enable it in
XGMAC cores.

This does not impact neither beneficts bandwidth but it does reduces CPU
usage because without the feature all the entire packet is memcpy'ed,
while that with the feature only the header is.

With Split Header disabled 'perf stat -d' gives:
86870.624945 task-clock (msec)      #    0.429 CPUs utilized
     1073352 context-switches       #    0.012 M/sec
           1 cpu-migrations         #    0.000 K/sec
         213 page-faults            #    0.002 K/sec
327113872376 cycles                 #    3.766 GHz (62.53%)
 56618161216 instructions           #    0.17  insn per cycle (75.06%)
 10742205071 branches               #  123.658 M/sec (75.36%)
   584309242 branch-misses          #    5.44% of all branches (75.19%)
 17594787965 L1-dcache-loads        #  202.540 M/sec (74.88%)
  4003773131 L1-dcache-load-misses  #   22.76% of all L1-dcache hits (74.89%)
  1313301468 LLC-loads              #   15.118 M/sec (49.75%)
   355906510 LLC-load-misses        #   27.10% of all LL-cache hits (49.92%)

With Split Header enabled 'perf stat -d' gives:
49324.456539 task-clock (msec)     #    0.245 CPUs utilized
     2542387 context-switches      #    0.052 M/sec
           1 cpu-migrations        #    0.000 K/sec
         213 page-faults           #    0.004 K/sec
177092791469 cycles                #    3.590 GHz (62.30%)
 68555756017 instructions          #    0.39  insn per cycle (75.16%)
 12697019382 branches              #  257.418 M/sec (74.81%)
   442081897 branch-misses         #    3.48% of all branches (74.79%)
 20337958358 L1-dcache-loads       #  412.330 M/sec (75.46%)
  3820210140 L1-dcache-load-misses #   18.78% of all L1-dcache hits (75.35%)
  1257719198 LLC-loads             #   25.499 M/sec (49.73%)
   685543923 LLC-load-misses       #   54.51% of all LL-cache hits (49.86%)

Changes from v2:
	- Reword commit message (Jakub)
Changes from v1:
	- Add performance info (David)
	- Add misssing dma_sync_single_for_device()
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      67afd6d1
    • J
      net: stmmac: xgmac: Correctly return that RX descriptor is not last one · c887e02a
      由 Jose Abreu 提交于 
      Return the correct value when RX descriptor is not the last one.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c887e02a
    • J
      net: stmmac: Prepare to add Split Header support · ec222003
      由 Jose Abreu 提交于 
      In order to add Split Header support, stmmac_rx() needs to take into
account that packet may be split accross multiple descriptors.

Refactor the logic of this function in order to support this scenario.

Changes from v2:
	- Fixup if condition detection (Jakub)
	- Don't stop NAPI with unfinished packet (Jakub)
	- Use napi_alloc_skb() (Jakub)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ec222003
    • J
      net: stmmac: Get correct timestamp values from XGMAC · 25e80cd0
      由 Jose Abreu 提交于 
      TX Timestamp in XGMAC comes from MAC instead of descriptors. Implement
this in a new callback.

Also, RX Timestamp in XGMAC must be cheked against corruption and we need
a barrier to make sure that descriptor fields are read correctly.

Changes from v2:
	- Rework return code check (Jakub)
Changes from v1:
	- Rework the get timestamp function (David)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      25e80cd0
    • D
      Merge branch 'drop_monitor-for-offloaded-paths' · 83beee5a
      由 David S. Miller 提交于 
      Ido Schimmel says:

====================
Add drop monitor for offloaded data paths

Users have several ways to debug the kernel and understand why a packet
was dropped. For example, using drop monitor and perf. Both utilities
trace kfree_skb(), which is the function called when a packet is freed
as part of a failure. The information provided by these tools is
invaluable when trying to understand the cause of a packet loss.

In recent years, large portions of the kernel data path were offloaded
to capable devices. Today, it is possible to perform L2 and L3
forwarding in hardware, as well as tunneling (IP-in-IP and VXLAN).
Different TC classifiers and actions are also offloaded to capable
devices, at both ingress and egress.

However, when the data path is offloaded it is not possible to achieve
the same level of introspection since packets are dropped by the
underlying device and never reach the kernel.

This patchset aims to solve this by allowing users to monitor packets
that the underlying device decided to drop along with relevant metadata
such as the drop reason and ingress port.

The above is achieved by exposing a fundamental capability of devices
capable of data path offloading - packet trapping. In much the same way
as drop monitor registers its probe function with the kfree_skb()
tracepoint, the device is instructed to pass to the CPU (trap) packets
that it decided to drop in various places in the pipeline.

The configuration of the device to pass such packets to the CPU is
performed using devlink, as it is not specific to a port, but rather to
a device. In the future, we plan to control the policing of such packets
using devlink, in order not to overwhelm the CPU.

While devlink is used as the control path, the dropped packets are
passed along with metadata to drop monitor, which reports them to
userspace as netlink events. This allows users to use the same interface
for the monitoring of both software and hardware drops.

Logically, the solution looks as follows:

                                    Netlink event: Packet w/ metadata
                                                   Or a summary of recent drops
                                  ^
                                  |
         Userspace                |
        +---------------------------------------------------+
         Kernel                   |
                                  |
                          +-------+--------+
                          |                |
                          |  drop_monitor  |
                          |                |
                          +-------^--------+
                                  |
                                  |
                                  |
                             +----+----+
                             |         |      Kernel's Rx path
                             | devlink |      (non-drop traps)
                             |         |
                             +----^----+      ^
                                  |           |
                                  +-----------+
                                  |
                          +-------+-------+
                          |               |
                          | Device driver |
                          |               |
                          +-------^-------+
         Kernel                   |
        +---------------------------------------------------+
         Hardware                 |
                                  | Trapped packet
                                  |
                               +--+---+
                               |      |
                               | ASIC |
                               |      |
                               +------+

In order to reduce the patch count, this patchset only includes
integration with netdevsim. A follow-up patchset will add devlink-trap
support in mlxsw.

Patches #1-#7 extend drop monitor to also monitor hardware originated
drops.

Patches #8-#10 add the devlink-trap infrastructure.

Patches #11-#12 add devlink-trap support in netdevsim.

Patches #13-#16 add tests for the generic infrastructure over netdevsim.

Example
=======

Instantiate netdevsim
---------------------

List supported traps
--------------------

netdevsim/netdevsim10:
  name source_mac_is_multicast type drop generic true action drop group l2_drops
  name vlan_tag_mismatch type drop generic true action drop group l2_drops
  name ingress_vlan_filter type drop generic true action drop group l2_drops
  name ingress_spanning_tree_filter type drop generic true action drop group l2_drops
  name port_list_is_empty type drop generic true action drop group l2_drops
  name port_loopback_filter type drop generic true action drop group l2_drops
  name fid_miss type exception generic false action trap group l2_drops
  name blackhole_route type drop generic true action drop group l3_drops
  name ttl_value_is_too_small type exception generic true action trap group l3_drops
  name tail_drop type drop generic true action drop group buffer_drops

Enable a trap
-------------

Query statistics
----------------

netdevsim/netdevsim10:
  name blackhole_route type drop generic true action trap group l3_drops
    stats:
        rx:
          bytes 7384 packets 52

Monitor dropped packets
-----------------------

dropwatch> set alertmode packet
Setting alert mode
Alert mode successfully set
dropwatch> set sw true
setting software drops monitoring to 1
dropwatch> set hw true
setting hardware drops monitoring to 1
dropwatch> start
Enabling monitoring...
Kernel monitoring activated.
Issue Ctrl-C to stop monitoring
drop at: ttl_value_is_too_small (l3_drops)
origin: hardware
input port ifindex: 55
input port name: eth0
timestamp: Mon Aug 12 10:52:20 2019 445911505 nsec
protocol: 0x800
length: 142
original length: 142

drop at: ip6_mc_input+0x8b8/0xef8 (0xffffffff9e2bb0e8)
origin: software
input port ifindex: 4
timestamp: Mon Aug 12 10:53:37 2019 024444587 nsec
protocol: 0x86dd
length: 110
original length: 110

Future plans
============

* Provide more drop reasons as well as more metadata
* Add dropmon support to libpcap, so that tcpdump/tshark could
  specifically listen on dropmon traffic, instead of capturing all
  netlink packets via nlmon interface

Changes in v3:
* Place test with the rest of the netdevsim tests
* Fix test to load netdevsim module
* Move devlink helpers from the test to devlink_lib.sh. Will be used
  by mlxsw tests
* Re-order netdevsim includes in alphabetical order
* Fix reverse xmas tree in netdevsim
* Remove double include in netdevsim

Changes in v2:
* Use drop monitor to report dropped packets instead of devlink
* Add drop monitor patches
* Add test cases
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      83beee5a
    • I
      Documentation: Add a section for devlink-trap testing · 95766451
      由 Ido Schimmel 提交于 
      Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      95766451
    • I
      selftests: devlink_trap: Add test cases for devlink-trap · b3cb7df9
      由 Ido Schimmel 提交于 
      Add test cases for devlink-trap on top of the netdevsim implementation.

The tests focus on the devlink-trap core infrastructure and user space
API. They test both good and bad flows and also dismantle of the netdev
and devlink device used to report trapped packets.

This allows device drivers to focus their tests on device-specific
functionality.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b3cb7df9
    • I
      selftests: forwarding: devlink_lib: Add devlink-trap helpers · a054c8d9
      由 Ido Schimmel 提交于 
      Add helpers to interact with devlink-trap, such as setting the action of
a trap and retrieving statistics.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a054c8d9
    • I
      selftests: forwarding: devlink_lib: Allow tests to define devlink device · bc030d9c
      由 Ido Schimmel 提交于 
      For tests that create their network interfaces dynamically or do not use
interfaces at all (as with netdevsim) it is useful to define their own
devlink device instead of deriving it from the first network interface.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bc030d9c
    • I
      Documentation: Add description of netdevsim traps · 9e087457
      由 Ido Schimmel 提交于 
      Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9e087457
    • I
      netdevsim: Add devlink-trap support · da58f90f
      由 Ido Schimmel 提交于 
      Have netdevsim register its trap groups and traps with devlink during
initialization and periodically report trapped packets to devlink core.

Since netdevsim is not a real device, the trapped packets are emulated
using a workqueue that periodically reports a UDP packet with a random
5-tuple from each active packet trap and from each running netdev.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      da58f90f
    • I
      Documentation: Add devlink-trap documentation · f3047ca0
      由 Ido Schimmel 提交于 
      Add initial documentation of the devlink-trap mechanism, explaining the
background, motivation and the semantics of the interface.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f3047ca0
    • I
      devlink: Add generic packet traps and groups · 391203ab
      由 Ido Schimmel 提交于 
      Add generic packet traps and groups that can report dropped packets as
well as exceptions such as TTL error.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      391203ab
    • I
      devlink: Add packet trap infrastructure · 0f420b6c
      由 Ido Schimmel 提交于 
      Add the basic packet trap infrastructure that allows device drivers to
register their supported packet traps and trap groups with devlink.

Each driver is expected to provide basic information about each
supported trap, such as name and ID, but also the supported metadata
types that will accompany each packet trapped via the trap. The
currently supported metadata type is just the input port, but more will
be added in the future. For example, output port and traffic class.

Trap groups allow users to set the action of all member traps. In
addition, users can retrieve per-group statistics in case per-trap
statistics are too narrow. In the future, the trap group object can be
extended with more attributes, such as policer settings which will limit
the amount of traffic generated by member traps towards the CPU.

Beside registering their packet traps with devlink, drivers are also
expected to report trapped packets to devlink along with relevant
metadata. devlink will maintain packets and bytes statistics for each
packet trap and will potentially report the trapped packet with its
metadata to user space via drop monitor netlink channel.

The interface towards the drivers is simple and allows devlink to set
the action of the trap. Currently, only two actions are supported:
'trap' and 'drop'. When set to 'trap', the device is expected to provide
the sole copy of the packet to the driver which will pass it to devlink.
When set to 'drop', the device is expected to drop the packet and not
send a copy to the driver. In the future, more actions can be added,
such as 'mirror'.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0f420b6c
    • I
      drop_monitor: Allow user to start monitoring hardware drops · 8e94c3bc
      由 Ido Schimmel 提交于 
      Drop monitor has start and stop commands, but so far these were only
used to start and stop monitoring of software drops.

Now that drop monitor can also monitor hardware drops, we should allow
the user to control these as well.

Do that by adding SW and HW flags to these commands. If no flag is
specified, then only start / stop monitoring software drops. This is
done in order to maintain backward-compatibility with existing user
space applications.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8e94c3bc
    • I
      drop_monitor: Add support for summary alert mode for hardware drops · d40e1deb
      由 Ido Schimmel 提交于 
      In summary alert mode a notification is sent with a list of recent drop
reasons and a count of how many packets were dropped due to this reason.

To avoid expensive operations in the context in which packets are
dropped, each CPU holds an array whose number of entries is the maximum
number of drop reasons that can be encoded in the netlink notification.
Each entry stores the drop reason and a count. When a packet is dropped
the array is traversed and a new entry is created or the count of an
existing entry is incremented.

Later, in process context, the array is replaced with a newly allocated
copy and the old array is encoded in a netlink notification. To avoid
breaking user space, the notification includes the ancillary header,
which is 'struct net_dm_alert_msg' with number of entries set to '0'.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d40e1deb
    • I
      drop_monitor: Add support for packet alert mode for hardware drops · 5e58109b
      由 Ido Schimmel 提交于 
      In a similar fashion to software drops, extend drop monitor to send
netlink events when packets are dropped by the underlying hardware.

The main difference is that instead of encoding the program counter (PC)
from which kfree_skb() was called in the netlink message, we encode the
hardware trap name. The two are mostly equivalent since they should both
help the user understand why the packet was dropped.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e58109b
    • I
      drop_monitor: Consider all monitoring states before performing configuration · 80cebed8
      由 Ido Schimmel 提交于 
      The drop monitor configuration (e.g., alert mode) is global, but user
will be able to enable monitoring of only software or hardware drops.

Therefore, ensure that monitoring of both software and hardware drops are
disabled before allowing drop monitor configuration to take place.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      80cebed8
    • I
      drop_monitor: Add basic infrastructure for hardware drops · edd3d007
      由 Ido Schimmel 提交于 
      Export a function that can be invoked in order to report packets that
were dropped by the underlying hardware along with metadata.

Subsequent patches will add support for the different alert modes.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      edd3d007
    • I
      drop_monitor: Initialize hardware per-CPU data · cac1174f
      由 Ido Schimmel 提交于 
      Like software drops, hardware drops also need the same type of per-CPU
data. Therefore, initialize it during module initialization and
de-initialize it during module exit.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cac1174f
    • I
      drop_monitor: Move per-CPU data init/fini to separate functions · 9b63f57d
      由 Ido Schimmel 提交于 
      Currently drop monitor only reports software drops to user space, but
subsequent patches are going to add support for hardware drops.

Like software drops, the per-CPU data of hardware drops needs to be
initialized and de-initialized upon module initialization and exit. To
avoid code duplication, break this code into separate functions, so that
these could be re-used for hardware drops.

No functional changes intended.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9b63f57d
    • D
      Merge branch 'bridge-mdb' · f7750830
      由 David S. Miller 提交于 
      Nikolay Aleksandrov says:

====================
net: bridge: mdb: allow dump/add/del of host-joined entries

This set makes the bridge dump host-joined mdb entries, they should be
treated as normal entries since they take a slot and are aging out.
We already have notifications for them but we couldn't dump them until
now so they remained hidden. We dump them similar to how they're
notified, in order to keep user-space compatibility with the dumped
objects (e.g. iproute2 dumps mdbs in a format which can be fed into
add/del commands) we allow host-joined groups also to be added/deleted via
mdb commands. That can later be used for L2 mcast MAC manipulation as
was recently discussed. Note that iproute2 changes are not necessary,
this set will work with the current user-space mdb code.

Patch 01 - a trivial comment move
Patch 02 - factors out the mdb filling code so it can be
           re-used for the host-joined entries
Patch 03 - dumps host-joined entries
Patch 04 - allows manipulation of host-joined entries via standard mdb
           calls

v3: fix compiler warning in patch 04 (DaveM)
v2: change patch 04 to avoid double notification and improve host group
    manual removal if no ports are present in the group
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7750830
    • N
      net: bridge: mdb: allow add/delete for host-joined groups · 1bc844ee
      由 Nikolay Aleksandrov 提交于 
      Currently this is needed only for user-space compatibility, so similar
object adds/deletes as the dumped ones would succeed. Later it can be
used for L2 mcast MAC add/delete.

v3: fix compiler warning (DaveM)
v2: don't send a notification when used from user-space, arm the group
    timer if no ports are left after host entry del
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1bc844ee
    • N
      net: bridge: mdb: dump host-joined entries as well · e77b0c84
      由 Nikolay Aleksandrov 提交于 
      Currently we dump only the port mdb entries but we can have host-joined
entries on the bridge itself and they should be treated as normal temp
mdbs, they're already notified:
$ bridge monitor all
[MDB]dev br0 port br0 grp ff02::8 temp

The group will not be shown in the bridge mdb output, but it takes 1 slot
and it's timing out. If it's only host-joined then the mdb show output
can even be empty.

After this patch we show the host-joined groups:
$ bridge mdb show
dev br0 port br0 grp ff02::8 temp
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e77b0c84
    • N
      net: bridge: mdb: factor out mdb filling · 6545916e
      由 Nikolay Aleksandrov 提交于 
      We have to factor out the mdb fill portion in order to re-use it later for
the bridge mdb entries. No functional changes intended.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6545916e
    • N
      net: bridge: mdb: move vlan comments · f59783f5
      由 Nikolay Aleksandrov 提交于 
      Trivial patch to move the vlan comments in their proper places above the
vid 0 checks.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f59783f5
    • D
      Merge branch 'net-phy-remove-genphy_config_init' · 59d0f749
      由 David S. Miller 提交于 
      Heiner Kallweit says:

====================
net: phy: remove genphy_config_init

Supported PHY features are either auto-detected or explicitly set.
In both cases calling genphy_config_init isn't needed. All that
genphy_config_init does is removing features that are set as
supported but can't be auto-detected. Basically it duplicates the
code in genphy_read_abilities. Therefore remove genphy_config_init.

v2:
- remove call also from new adin driver
v3:
- pass NULL as config_init function pointer for dp83848
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59d0f749
    • H
      net: phy: remove genphy_config_init · 4b9cb2a5
      由 Heiner Kallweit 提交于 
      Now that all users have been removed we can remove genphy_config_init.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4b9cb2a5
    • H
      net: dsa: remove calls to genphy_config_init · 00843d99
      由 Heiner Kallweit 提交于 
      Supported PHY features are either auto-detected or explicitly set.
In both cases calling genphy_config_init isn't needed.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      00843d99
    • H
      net: phy: remove calls to genphy_config_init · c227ce44
      由 Heiner Kallweit 提交于 
      Supported PHY features are either auto-detected or explicitly set.
In both cases calling genphy_config_init isn't needed. All that
genphy_config_init does is removing features that are set as
supported but can't be auto-detected. Basically it duplicates the
code in genphy_read_abilities. Therefore remove such calls from
all PHY drivers.

v2:
- remove call also from new adin PHY driver
v3:
- pass NULL as config_init function pointer for dp83848
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c227ce44
  3. 17 8月, 2019 10 次提交