Make return value an int instead of an unsigned char so that
we do not lose negative error return values.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

They are annoying and do not help anyone.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJustin Lindley <justin.lindley@hp.com>
Reviewed-by: NMike Miller <michael.miller@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

It shouldn't happen that we get a check condition with no sense data, but if it
does, we shouldn't just drop the check condition on the floor.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJustin Lindley <justin.lindley@hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJustin Lindley <justin.lindley@hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

CTLR_STATE_CHANGE_EVENT and CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL
do not require rescans to be initiated.  Current firmware filters out
these events already, but some out of date firmware doesn't, so the
driver needs to filter them out too.  Without this change and with out
of date firmware you may see the driver spending a lot of time
scanning devices unnecessarily on some Smart Arrays.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJustin Lindley <justin.lindley@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There's nothing the user can or should do about these messages,
the commands are retried down the normal RAID path, and the
messages just flood the logs and sap performance.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

for controllers which support either of the ioaccel transport methods.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Avoid excessive locking by using per-cpu variable for lockup_detected
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Now that we can allocate more than 4 reply queues (up to 64)
we shouldn't try to make them share the same allocation but
should allocate them separately.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

No sense having 8 or 16 reply queues if you only have 4 cpus,
and likewise no sense limiting to 8 reply queues if you have
many more cpus.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

They are not completely free of cost when disabled and
when enabled emitting debug output for every command
submitted produces far too much output to be useful.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

After 3.22 firmware, PMC firmware guys tell us the
previous 5 second delay after a reset now needs to
be 10 secs to avoid a PCIe error due to the driver
looking at the controller too soon after the reset.
Signed-off-by: NJustin Lindley <justin.lindley@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Treat the the data direction bits as a bit mask allowing both
READ and WRITE at the same time instead of testing for equality
to see if it's a exclusively a READ or a WRITE.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The fields "major", "max_outstanding", and "usage_count"
of struct ctlr_info were not used for anything.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Matt Taggart reported that mvsas didn't bind to the Marvell
SAS controller on a Supermicro AOC-SAS2LP-MV8 board.

lspci reports it as:

01:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. Device [1b4b:9485] (rev 03)
        Subsystem: Marvell Technology Group Ltd. Device [1b4b:9485]
[...]

Add it to the device table as chip_9485.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Reported-by: NMatt Taggart <taggart@debian.org>
Tested-by: NMatt Taggart <taggart@debian.org>
Acked-By: NJan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This reverts commit 11206081.

Based on comments from Mike Christie and Sony John-N.

Hi,

without this patch the istwiRWRequest->MsgContext is always set to zero,
this patch saves the MsgContext in a msgcontext variable and then restores
the value.
Thanks to  David Jeffery who found the issue and did the analysis.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NDesai, Kashyap <Kashyap.Desai@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The acornscsi driver was added in v2.1.88. It has always #undef-ed
CONFIG_SCSI_ACORNSCSI_LINK near the top of acornscsi.c. And, just to be
sure, it has also always triggered a preprocessor error if
CONFIG_SCSI_ACORNSCSI_LINK was still defined. But, as far as I can see,
it has never even been possible to set SCSI_ACORNSCSI_LINK through
kconfig, or its predecessors, in the first place.

Let's remove the code involved.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is the delta between the two submissions:
[PATCH 00/12] scsi/NCR5380: fix debugging macros and #include structure
and
[PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure

The macro definition changes were discussed on the mailing list during
review. The idea is to get the compiler to check the parameters of
disabled printk() calls so that the debugging code doesn't rot again.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Reusing a msg frame quickly means it's still cache-hot.  This yields
a small but noticable performance improvement in a well-known database
benchmark.  This improvement is already present in the mpt3sas driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Reusing a smid quickly means it's still cache-hot.  This yields a small
but noticable performance improvement in a well-known database benchmark.
This improvement is already present in the mpt3sas driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The mpt2sas_scsih_issue_tm() function does not use the 'serial_number'
argument passed to it.  Removing it removes the last vestiges of the
scsi_cmnd's serial_number field from this driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The mpt3sas_scsih_issue_tm() function does not use the 'serial_number'
argument passed to it.  Removing it removes the last vestiges of the
scsi_cmnd's serial_number field from this driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Acked-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Acked-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There are missing curly braces here so it prints that the recovery
failed even when it succeeded.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Acked-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 Bumping the driver version.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 During heavy IO in multipath environment with many active sessions
 and port-bouncing happening, there is a race condition because of
 which beiscsi_prcess_cqe() gets called for a connection whose
 endpoint is freed.

 Checking endpoint reference for a connection before processing in
 beiscsi_process_cq().
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 EQ teardown should happen only after all CQ are destroyed.
 In some FW config, adapter goes into a freeze state. This
 fix moves teardown of MCC-Q before the EQ teardown happens.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 From: Dan Carpenter [mailto:dan.carpenter@oracle.com]
 Sent: Friday, March 28, 2014 1:42 AM
 Subject: re: [SCSI] be2iscsi: Fix handling timed out MBX completion from FW

 Hello Jayamohan Kallickal,

 The patch 1957aa7f: "[SCSI] be2iscsi: Fix handling timed out MBX completion from FW" from Jan 29, 2014, leads to the following static checker warning:

 drivers/scsi/be2iscsi/be_main.c:5581 beiscsi_dev_probe()
 error: memset() '&phba->ctrl.ptag_state[i]->tag_mem_state' too small (24 vs 32)

 drivers/scsi/be2iscsi/be_main.c
 5576          for (i = 0; i < MAX_MCC_CMD; i++) {
 5577                  init_waitqueue_head(&phba->ctrl.mcc_wait[i + 1]);
 5578                  phba->ctrl.mcc_tag[i] = i + 1;
 5579                  phba->ctrl.mcc_numtag[i + 1] = 0;
 5580                  phba->ctrl.mcc_tag_available++;
 5581                  memset(&phba->ctrl.ptag_state[i].tag_mem_state, 0,
 5582                         sizeof(struct beiscsi_mcc_tag_state));
                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Probably this this be change to sizeof(struct be_dma_mem struct)?  It looks like we are corrupting memory a bit here.

 5583          }

 regards,
 dan carpenter
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 SKH-R adapter, TCP Window Size/Scale parameters are passed
 in TCP Connection Offload Mbx Command.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>