Some fields missed to set default column length so it broke align in
--stdio output.  Add perf_hpp__reset_width() to set it to a sane
default value.

Note that this change will ignore -w/--column-widths option for now.

Before:
  $ perf report -F cpu,comm,overhead --stdio
  ...
  # CPU          Command  Overhead
  #   ...............  ........
  #
    0          firefox     2.65%
    0      kworker/0:0     1.45%
    0          swapper     5.52%
    0         synergys     0.92%
    1          firefox     4.54%

After:
  # CPU          Command  Overhead
  # ...  ...............  ........
  #
      0          firefox     2.65%
      0      kworker/0:0     1.45%
      0          swapper     5.52%
      0         synergys     0.92%
      1          firefox     4.54%
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-17-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When it converted sort entries to hpp formats, it missed se->elide
handling, so add it for compatibility.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The --fields option is to allow user setup output field in any order.
It can receive any sort keys and following (hpp) fields:

  overhead, overhead_sys, overhead_us, sample and period

If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.

More more information, please see previous patch "perf report:
Add -F option to specify output fields"
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-15-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The hists__filter_entries() function is called when down arrow key is
pressed for navigating through the entries in TUI.  It has a check for
filtering out entries that have very small overhead (under min_pcnt).

However it just assumed the entries are sorted by the overhead so when
it saw such a small overheaded entry, it just stopped navigating as an
optimization.  But it's not true anymore due to new --fields and
--sort optoin behavior and this case users cannot go down to a next
entry if ther's an entry with small overhead in-between.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Currently, what the sort_entry does is just identifying hist entries
so that they can be grouped properly.  However, with -F option
support, it indeed needs to sort entries appropriately to be shown to
users.  So add ->sort() member to do it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-13-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The -F/--fields option is to allow user setup output field in any
order.  It can receive any sort keys and following (hpp) fields:

  overhead, overhead_sys, overhead_us, sample and period

If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.

The output fields also affect sort order unless you give -s/--sort
option.  And any keys specified on -s option, will also be added to
the output field list automatically.

  $ perf report -F sym,sample,overhead
  ...
  #                     Symbol       Samples  Overhead
  # ..........................  ............  ........
  #
    [.] __cxa_atexit                       2     2.50%
    [.] __libc_csu_init                    4     5.00%
    [.] __new_exitfn                       3     3.75%
    [.] _dl_check_map_versions             1     1.25%
    [.] _dl_name_match_p                   4     5.00%
    [.] _dl_setup_hash                     1     1.25%
    [.] _dl_sysdep_start                   1     1.25%
    [.] _init                              5     6.25%
    [.] _setjmp                            6     7.50%
    [.] a                                  8    10.00%
    [.] b                                  8    10.00%
    [.] brk                                1     1.25%
    [.] c                                  8    10.00%

Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

So that it can be set properly prior to set up output fields.  That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code.  Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400480762-22852-10-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add overhead{,_sys,_us,_guest_sys,_guest_us}, sample and period sort
keys so that they can be selected with --sort/-s option.

  $ perf report -s period,comm --stdio
  ...
  # Overhead        Period          Command
  # ........  ............  ...............
  #
      47.06%           152          swapper
      13.93%            45  qemu-system-arm
      12.38%            40         synergys
       3.72%            12          firefox
       2.48%             8            xchat
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-9-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The callback was used by TUI for determining color of folded sign
using percent of first field/column. But it cannot be used anymore
since it now support dynamic reordering of output field.

So move the logic to the hist_browser__show_entry().
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-8-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.

The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.

To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list.  And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-7g3h86woz2sckg3h1lj42ygj@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Convert output sorting function to use ->sort hpp functions.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-6-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Move logic of hist_entry__sort_on_period to __hpp__sort() in order to
support event group report.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-5-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

It wrapped sort entries to hpp functions, so using the hpp sort list
to sort entries.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-4-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

This is a preparation of consolidating management of output field and
sort keys.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Those function pointers will be used to sort report output based on
the selected fields.  This is a preparation of later change.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core

Pull perf/core improvements and fixes from Jiri Olsa:

  * Add libdw DWARF post unwind support for ARM (Jean Pihet)

  * Consolidate types.h for ARM and ARM64 (Jean Pihet)

  * Fix possible null pointer dereference in session.c (Masanari Iida)

  * Cleanup, remove unused variables in map_switch_event() (Dongsheng Yang)

  * Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)

  * Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes a bug in  precise_store_data_hsw() whereby
it would set the data source memory level to the wrong value.

As per the the SDM Vol 3b Table 18-41 (Layout of Data Linear
Address Information in PEBS Record), when status bit 0 is set
this is a L1 hit, otherwise this is a L1 miss.

This patch encodes the memory level according to the specification.

In V2, we added the filtering on the store events.
Only the following events produce L1 information:
 * MEM_UOPS_RETIRED.STLB_MISS_STORES
 * MEM_UOPS_RETIRED.LOCK_STORES
 * MEM_UOPS_RETIRED.SPLIT_STORES
 * MEM_UOPS_RETIRED.ALL_STORES

Cc: mingo@elte.hu
Cc: acme@ghostprotocols.net
Cc: jolsa@redhat.com
Cc: jmario@redhat.com
Cc: ak@linux.intel.com
Tested-and-Reviewed-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140515155644.GA3884@quadSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Vince noticed that we test the (unsigned long) flags field against an
(unsigned int) constant. This would allow setting the high bits on 64bit
platforms and not get an error.

There is nothing that uses the high bits, so it should be entirely
harmless, but we don't want userspace to accidentally set them anyway,
so fix the constants.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140423102254.GL11096@twins.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

... in 3a497f48 ("perf: Simplify perf_event_exit_task_context()")
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1399720259-28275-1-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Adding libdw DWARF post unwind support, which is part
of elfutils-devel/libdw-dev package from version 0.158.

The new code is contained in unwin-libdw.c object, and
implements unwind__get_entries unwind interface function.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-4-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Adding dwarf unwind test, that setups live machine data over
the perf test thread and does the remote unwind.

Need to use -fno-optimize-sibling-calls for test compilation,
otherwise 'krava_*' function calls are optimized into jumps
and omitted from the stack unwind.

So far it was enabled only for x86.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-3-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Introducing perf_regs_load function, which is going
to be used for dwarf unwind test in following patches.

It takes single argument as a pointer to the regs dump
buffer and populates it with current registers values.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-2-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Prevents a build breakage since commit d944c4ee
'tools: Consolidate types.h'
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Link: http://lkml.kernel.org/r/1400229672-16104-1-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

cppcheck detected following warning:
[tools/perf/util/session.c:1628] -> [tools/perf/util/session.c:1632]:
 (warning) Possible null pointer dereference: session - otherwise it
 is redundant to check it against null.

In order to avoide null pointer, check the pointer before use.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Link: http://lkml.kernel.org/r/1400087618-13628-1-git-send-email-standby24x7@gmail.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In map_switch_event(), we don't care the previous process currently,
this patch remove the infomation we get but not used.
Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1400218625-14613-1-git-send-email-yangds.fnst@cn.fujitsu.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

As we do not use .success in sched_wakeup event any more, then
we can not guarantee that the task when wakeup event happen is
out of run queue. So the message of nr_state_machine_bugs is
not correct.
Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1399945101-21736-1-git-send-email-yangds.fnst@cn.fujitsu.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

trace_sched_wakeup(.success) is a dead argument and has been for ages,
the only reason its still there is because of brain dead software, which
apparently includes perf tools

There's a few more instances in pearly snake shit, but that's not
supported as far as I care anyhow, so let that bitrot.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140512181946.GG13467@laptop.programming.kicks-ass.netSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core

Pull perf/core improvements and fixes from Jiri Olsa:

  * Propagate exit status of a command line workload for
    record command (Namhyung Kim)

  * Use tid for finding thread (Namhyung Kim)

  * Clarify the output of perf sched map plus small sched
    command fixies (Dongsheng Yang)
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

I believe that passing pid (instead of tid) as the 3rd arg of the
machine__find*_thread() was to find a main thread so that it can
search proper map group for symbols.  However with the map sharing
patch applied, it now can do it in any thread.

It fixes a bug when each thread has different name, it only reports a
main thread for samples in other threads.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1399856202-26221-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The on_exit() function was only used in perf record but it's gone in
previous patch.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Link: http://lkml.kernel.org/r/1399855645-25815-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Currently perf record doesn't propagate the exit status of a workload
given by the command line.  But sometimes it'd useful if it's
propagated so that a monitoring script can handle errors
appropriately.

To do that, it moves most of logic out of the exit handlers and run
them directly in the __cmd_record().  The only thing needs to be done
in the handler is propagating terminating signal so that the shell can
terminate its loop properly when Ctrl-C was pressed.  Also it cleaned
up the resource management code in record__exit().

With this change, perf record returns the child exit status in case of
normal termination and send signal to itself when terminated by signal.

Example run of Stephane's case:

  $ perf record true && echo yes || echo no
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ]
  yes

  $ perf record false && echo yes || echo no
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ]
  no

Jiri's case (error in parent):

  $ perf record -m 10G true && echo yes || echo no
  rounding mmap pages size to 17179869184 bytes (4194304 pages)
  failed to mmap with 12 (Cannot allocate memory)
  no

  $ ulimit -n 6
  $ perf record sleep 1 && echo yes || echo no
  failed to create 'go' pipe: Too many open files
  Couldn't run the workload!
  no

And Peter's case (interrupted by signal):

  $ while :; do perf record sleep 1; done
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ]
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In output of perf sched map, any shortname of thread will be explained
at the first time when it appear.

Example:
              *A0       228836.978985 secs A0 => perf:23032
          *.   A0       228836.979016 secs B0 => swapper:0
           .  *C0       228836.979099 secs C0 => migration/3:22
  *A0      .   C0       228836.979115 secs
   A0      .  *.        228836.979115 secs

But B0, which is explained as swapper:0 did not appear in the
left part of output. Instead, we use '.' as the shortname of
swapper:0. So the comment of "B0 => swapper:0" is not easy to
understand.

This patch clarify the output of perf sched map with not allocating
one letter-number shortname for swapper:0 and print ". => swapper:0"
as the explanation for swapper:0.

Example:
              *A0       228836.978985 secs A0 => perf:23032
          * .  A0       228836.979016 secs .  => swapper:0
            . *B0       228836.979099 secs B0 => migration/3:22
  *A0       .  B0       228836.979115 secs
   A0       . * .       228836.979115 secs
   A0     *C0   .       228836.979225 secs C0 => ksoftirqd/2:18
   A0     *D0   .       228836.979236 secs D0 => rcu_sched:7
Signed-off-by: NDongsheng <yangds.fnst@cn.fujitsu.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1399354741-19522-1-git-send-email-yangds.fnst@cn.fujitsu.com
[ small style fixes to make checkpatch happy ]
Signed-off-by: NJiri Olsa <jolsa@kernel.org>

Currently, TASK_STATE_TO_CHAR_STR in kernel space is already expanded to RSDTtZXxKWP,
but it is still RSDTtZX in perf sched tool.

This patch update TASK_STATE_TO_CHAR_STR to the new value in kernel space.
Signed-off-by: NDongsheng <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/6d2f55dc1e02c1e29a5d70bfeb9d6e8863caf2aa.1399273302.git.yangds.fnst@cn.fujitsu.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

We should record and process sched:sched_wakeup_new event in
perf sched tool, but currently, there is the process function
for it, without recording it in record subcommand.

This patch add -e sched:sched_wakeup_new to perf sched record.
Signed-off-by: NDongsheng <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/710c6edd2162b2cea1711443f54de47c0210d9fd.1399273302.git.yangds.fnst@cn.fujitsu.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Instead of jumping through hoops to make sure to find (and exit) each
event, do it the simple straight fwd way.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tij931199thfkys8vbnokdpf@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Primarily make perf_event_release_kernel() into put_event(), this will
allow kernel space to create per-task inherited events, and is safer
in general.

Also, document the free_event() assumptions.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rk9pvr6e1d0559lxstltbztc@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Document and validate the locking assumption of event_sched_in().
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-sybq1publ9xt5no77cwvi0eo@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 38b435b1 ("perf: Fix tear-down of inherited group events")
states that we need to destroy groups for inherited events, but it
doesn't make any sense to not also destroy groups for normal events.

And while it usually makes no difference (the normal events won't
leak, and its very likely all the group events will die in quick
succession) it does make the code more consistent and closes a
potential hole for trouble.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-426egt8zmsm12d2q8k2xz4tt@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make sure all events in a group have the same inherit state. It was
possible for group leaders to have inherit set while sibling events
would not have inherit set.

In this case we'd still inherit the siblings, leading to some
non-fatal weirdness.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r32tt8yldvic3jlcghd3g35u@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>