With Android UI and benchmarks the latency of cpufreq response to
certain scheduling events can become very critical. Currently, callbacks
into cpufreq governors are only made from the scheduler if the target
CPU of the event is the same as the current CPU. This means there are
certain situations where a target CPU may not run the cpufreq governor
for some time.

One testcase to show this behavior is where a task starts running on
CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the
system is configured such that the new tasks should receive maximum
demand initially, this should result in CPU0 increasing frequency
immediately. But because of the above mentioned limitation though, this
does not occur.

This patch updates the scheduler core to call the cpufreq callbacks for
remote CPUs as well.

The schedutil, ondemand and conservative governors are updated to
process cpufreq utilization update hooks called for remote CPUs where
the remote CPU is managed by the cpufreq policy of the local CPU.

The intel_pstate driver is updated to always reject remote callbacks.

This is tested with couple of usecases (Android: hackbench, recentfling,
galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit
octa-core, single policy). Only galleryfling showed minor improvements,
while others didn't had much deviation.

The reason being that this patch only targets a corner case, where
following are required to be true to improve performance and that
doesn't happen too often with these tests:

- Task is migrated to another CPU.
- The task has high demand, and should take the target CPU to higher
  OPPs.
- And the target CPU doesn't call into the cpufreq governor until the
  next tick.

Based on initial work from Steve Muckle.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSaravana Kannan <skannan@codeaurora.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Make iowait_boost and iowait_boost_max as unsigned int since its unit
is kHz and this is consistent with struct cpufreq_policy.  Also change
the local variables in sugov_iowait_boost() to match this.
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the iowait_boost feature in schedutil makes the frequency
go to max on iowait wakeups.  This feature was added to handle a case
that Peter described where the throughput of operations involving
continuous I/O requests [1] is reduced due to running at a lower
frequency, however the lower throughput itself causes utilization to
be low and hence causing frequency to be low hence its "stuck".

Instead of going to max, its also possible to achieve the same effect
by ramping up to max if there are repeated in_iowait wakeups
happening. This patch is an attempt to do that. We start from a lower
frequency (policy->min) and double the boost for every consecutive
iowait update until we reach the maximum iowait boost frequency
(iowait_boost_max).

I ran a synthetic test (continuous O_DIRECT writes in a loop) on an
x86 machine with intel_pstate in passive mode using schedutil.  In
this test the iowait_boost value ramped from 800MHz to 4GHz in 60ms.
The patch achieves the desired improved throughput as the existing
behavior.

[1] https://patchwork.kernel.org/patch/9735885/Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Suggested-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This adds a perl script to actually parse the MAINTAINERS file, clean up
some whitespace in it, warn about errors in it, and then properly sort
the end result.

My perl-fu is atrocious, so the script has basically been created by
randomly putting various characters in a pile, mixing them around, and
then looking it the end result does anything interesting when used as a
perl script.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepping for scripting the MAINTAINERS file cleanup (and possible split)
showed a couple of cases where the headers for a couple of entries were
bogus.

There's a few different kinds of bogosities:

 - the X-GENE SOC EDAC case was confused and split over two lines

 - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all
   different things.

 - the NOKIA N900 CAMERA SUPPORT" was duplicated

all of which were more obvious when you started doing associative arrays
in perl to track these things by the header (so that we can alphabetize
this thing properly, and so that we might split it up by the data too).

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull xen fixes from Juergen Gross:
 "Some fixes and cleanups for running under Xen"

* tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: don't online new memory initially
  xen/x86: fix cpu hotplug
  xen/grant-table: log the lack of grants
  xen/x86: Don't BUG on CPU0 offlining

When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.

Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.

Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.

In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

Commit dc6416f1 ("xen/x86: Call
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()")
introduced an error leading to a stack overflow of the idle task when
a cpu was brought offline/online many times: by calling
cpu_startup_entry() instead of returning at the end of xen_play_dead()
do_idle() would be entered again and again.

Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing
to return from xen_play_dead().

Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

log a message when we enter this situation:
1) we already allocated the max number of available grants from hypervisor
and
2) we still need more (but the request fails because of 1)).

Sometimes the lack of grants causes IO hangs in xen_blkfront devices.
Adding this log would help debuging.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests
BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a
leftover from ancient times when CPU0 hotplug was impossible, it works
just fine for HVM.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Avoid buffer overruns in applesmc driver"

* tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (applesmc) Avoid buffer overruns

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
  huge at all, a revert of a patch that turned out to break things, a
  fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
  definition correct, and a few minor serial driver fixes for reported
  issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix TIOCGPTPEER ioctl definition
  tty: hide unused pty_get_peer function
  tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
  serial: imx: Prevent TX buffer PIO write when a DMA has been started
  Revert "serial: imx-serial - move DMA buffer configuration to DT"
  serial: sh-sci: Uninitialized variables in sysfs files
  serial: st-asc: Potential error pointer dereference

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 4.13-rc2. All fix
  reported problems with 4.13-rc1 or older kernels (like the binder
  fixes). Full details in the shortlog.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  w1: omap-hdq: fix error return code in omap_hdq_probe()
  regmap: regmap-w1: Fix build troubles
  w1: Fix slave count on 1-Wire bus (resend)
  mux: mux-core: unregister mux_class in mux_exit()
  mux: remove the Kconfig question for the subsystem
  nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
  drivers/fsi: fix fsi_slave_mode prototype
  fsi: core: register with postcore_initcall
  thunderbolt: Correct access permissions for active NVM contents
  vmbus: re-enable channel tasklet
  spmi: pmic-arb: Always allocate ppid_to_apid table
  MAINTAINERS: Add entry for SPMI subsystem
  spmi: Include OF based modalias in device uevent
  binder: Use wake up hint for synchronous transactions.
  binder: use group leader instead of open thread
  Revert "android: binder: Sanity check at binder ioctl"

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 4.13-rc2.

  The usual batch, gadget fixes for reported issues, as well as xhci
  fixes, and a small random collection of other fixes for reported
  issues.

  All have been in linux-next with no reported issues"

* tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  xhci: fix memleak in xhci_run()
  usb: xhci: fix spinlock recursion for USB2 test mode
  xhci: fix 20000ms port resume timeout
  usb: xhci: Issue stop EP command only when the EP state is running
  xhci: Bad Ethernet performance plugged in ASM1042A host
  xhci: Fix NULL pointer dereference when cleaning up streams for removed host
  usb: renesas_usbhs: gadget: disable all eps when the driver stops
  usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
  usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen()
  usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac
  usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd()
  usb: gadget: f_uac2: endianness fixes.
  usb: gadget: f_uac1: endianness fixes.
  include: usb: audio: specify exact endiannes of descriptors
  usb: gadget: udc: start_udc() can be static
  usb: dwc2: gadget: On USB RESET reset device address to zero
  usb: storage: return on error to avoid a null pointer dereference
  usb: typec: include linux/device.h in ucsi.h
  USB: cdc-acm: add device-id for quirky printer
  usb: dwc3: gadget: only unmap requests from DMA if mapped
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for reported issues for
  4.13-rc2.

  Also in here is a new driver, the virtualbox DRM driver. It's
  stand-alone and got acks from the DRM developers to go in through this
  tree. It's a new thing, but it should be fine for this point in the rc
  cycle due to it being independent.

  All of this has been in linux-next for a while with no reported
  issues"

* tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8188eu: add TL-WN722N v2 support
  staging: speakup: safely register and unregister ldisc
  staging: speakup: add functions to register and unregister ldisc
  staging: speakup: safely close tty
  staging: sm750fb: avoid conflicting vesafb
  staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code
  staging: vboxvideo: Add vboxvideo to drivers/staging
  staging: sm750fb: fixed a assignment typo
  staging: rtl8188eu: memory leak in rtw_free_cmd_obj()
  staging: vchiq_arm: fix error codes in probe
  staging: comedi: ni_mio_common: fix AO timer off-by-one regression

Fix major alphabetic errors.  No attempt to fix items that all begin
with the same word (like ARM, BROADCOM, DRM, EDAC, FREESCALE, INTEL,
OMAP, PCI, SAMSUNG, TI, USB, etc.).

(diffstat +/- is different by one line because TI KEYSTONE MULTICORE
had 2 blank lines after it.)
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfixes from Anna Schumaker:
 "Stable bugfix:
   - Fix error reporting regression

  Bugfixes:
   - Fix setting filelayout ds address race
   - Fix subtle access bug when using ACLs
   - Fix setting mnt3_counts array size
   - Fix a couple of pNFS commit races"

* tag 'nfs-for-4.13-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS/filelayout: Fix racy setting of fl->dsaddr in filelayout_check_deviceid()
  NFS: Be more careful about mapping file permissions
  NFS: Store the raw NFS access mask in the inode's access cache
  NFSv3: Convert nfs3_proc_access() to use nfs_access_set_mask()
  NFS: Refactor NFS access to kernel access mask calculation
  net/sunrpc/xprt_sock: fix regression in connection error reporting.
  nfs: count correct array for mnt3_counts array size
  Revert commit 722f0b89 ("pNFS: Don't send COMMITs to the DSes if...")
  pNFS/flexfiles: Handle expired layout segments in ff_layout_initiate_commit()
  NFS: Fix another COMMIT race in pNFS
  NFS: Fix a COMMIT race in pNFS
  mount: copy the port field into the cloned nfs_server structure.
  NFS: Don't run wake_up_bit() when nobody is waiting...
  nfs: add export operations

Pull overlayfs fixes from Miklos Szeredi:
 "This fixes a crash with SELinux and several other old and new bugs"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: check for bad and whiteout index on lookup
  ovl: do not cleanup directory and whiteout index entries
  ovl: fix xattr get and set with selinux
  ovl: remove unneeded check for IS_ERR()
  ovl: fix origin verification of index dir
  ovl: mark parent impure on ovl_link()
  ovl: fix random return value on mount

Pull block fixes from Jens Axboe:
 "A small set of fixes for -rc2 - two fixes for BFQ, documentation and
  code, and a removal of an unused variable in nbd. Outside of that, a
  small collection of fixes from the usual crew on the nvme side"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvmet: don't report 0-bytes in serial number
  nvmet: preserve controller serial number between reboots
  nvmet: Move serial number from controller to subsystem
  nvmet: prefix version configfs file with attr
  nvme-pci: Fix an error handling path in 'nvme_probe()'
  nvme-pci: Remove nvme_setup_prps BUG_ON
  nvme-pci: add another device ID with stripe quirk
  nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association
  nvme: fix byte swapping in the streams code
  nbd: kill unused ret in recv_work
  bfq: dispatch request to prevent queue stalling after the request completion
  bfq: fix typos in comments about B-WF2Q+ algorithm

Pull more rdma fixes from Doug Ledford:
 "As per my previous pull request, there were two drivers that each had
  a rather large number of legitimate fixes still to be sent.

  As it turned out, I also missed a reasonably large set of fixes from
  one person across the stack that are all important fixes. All in all,
  the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull
  request.

  There were some other random fixes that I didn't send in the last pull
  request that I added to this one. This catches the rdma stack up to
  the fixes from up to about the beginning of this week. Any more fixes
  I'll wait and batch up later in the -rc cycle. This will give us a
  good base to start with for basing a for-next branch on -rc2.

  Summary:

   - i40iw fixes

   - bnxt_re fixes

   - Dan Carpenter bugfixes across stack

   - ten more random fixes, no more than two from any one person"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  RDMA/core: Initialize port_num in qp_attr
  RDMA/uverbs: Fix the check for port number
  IB/cma: Fix reference count leak when no ipv4 addresses are set
  RDMA/iser: don't send an rkey if all data is written as immadiate-data
  rxe: fix broken receive queue draining
  RDMA/qedr: Prevent memory overrun in verbs' user responses
  iw_cxgb4: don't use WR keys/addrs for 0 byte reads
  IB/mlx4: Fix CM REQ retries in paravirt mode
  IB/rdmavt: Setting of QP timeout can overflow jiffies computation
  IB/core: Fix sparse warnings
  RDMA/bnxt_re: Fix the value reported for local ack delay
  RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq
  RDMA/bnxt_re: Fix return value of poll routine
  RDMA/bnxt_re: Enable atomics only if host bios supports
  RDMA/bnxt_re: Specify RDMA component when allocating stats context
  RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP
  RDMA/bnxt_re: Report supported value to IB stack in query_device
  RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails
  RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error
  RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext
  ...

Pull drm fixes from Dave Airlie:
 "A bunch of fixes for rc2: two imx regressions, vc4 fix, dma-buf fix,
  some displayport mst fixes, and an amdkfd fix.

  Nothing too crazy, I assume we just haven't see much rc1 testing yet"

* tag 'drm-fixes-for-v4.13-rc2' of git://people.freedesktop.org/~airlied/linux:
  drm/mst: Avoid processing partially received up/down message transactions
  drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
  drm/mst: Fix error handling during MST sideband message reception
  drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure
  drm/imx: fix typo in ipu_plane_formats[]
  drm/vc4: Fix VBLANK handling in crtc->enable() path
  dma-buf/fence: Avoid use of uninitialised timestamp
  drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec
  drm/radeon: Remove initialization of shared_resources.num_mec
  drm/amdkfd: Remove unused references to shared_resources.num_mec
  drm/amdgpu: Fix KFD oversubscription by tracking queues correctly

Pull tracing fixes from Steven Rostedt:
 "Three minor updates

   - Use the new GFP_RETRY_MAYFAIL to be more aggressive in allocating
     memory for the ring buffer without causing OOMs

   - Fix a memory leak in adding and removing instances

   - Add __rcu annotation to be able to debug RCU usage of function
     tracing a bit better"

* tag 'trace-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  trace: fix the errors caused by incompatible type of RCU variables
  tracing: Fix kmemleak in instance_rmdir
  tracing/ring_buffer: Try harder to allocate

Pull KVM fixes from Radim Krčmář:
 "A bunch of small fixes for x86"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: hyperv: avoid livelock in oneshot SynIC timers
  KVM: VMX: Fix invalid guest state detection after task-switch emulation
  x86: add MULTIUSER dependency for KVM
  KVM: nVMX: Disallow VM-entry in MOV-SS shadow
  KVM: nVMX: track NMI blocking state separately for each VMCS
  KVM: x86: masking out upper bits

Pull powerpc fixes from Michael Ellerman:
 "A handful of fixes, mostly for new code:

   - some reworking of the new STRICT_KERNEL_RWX support to make sure we
     also remove executable permission from __init memory before it's
     freed.

   - a fix to some recent optimisations to the hypercall entry where we
     were clobbering r12, this was breaking nested guests (PR KVM).

   - a fix for the recent patch to opal_configure_cores(). This could
     break booting on bare metal Power8 boxes if the kernel was built
     without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.

   - .. and finally a workaround for spurious PMU interrupts on Power9
     DD2.

  Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh"

* tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
  powerpc/mm/hash: Refactor hash__mark_rodata_ro()
  powerpc/mm/radix: Refactor radix__mark_rodata_ro()
  powerpc/64s: Fix hypercall entry clobbering r12 input
  powerpc/perf: Avoid spurious PMU interrupts after idle
  powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()

Pull x86 fixes from Ingo Molnar:
 "Half of the fixes are for various build time warnings triggered by
  randconfig builds. Most (but not all...) were harmless.

  There's also:

   - ACPI boundary condition fixes

   - UV platform fixes

   - defconfig updates

   - an AMD K6 CPU init fix

   - a %pOF printk format related preparatory change

   - .. and a warning fix related to the tlb/PCID changes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/devicetree: Convert to using %pOF instead of ->full_name
  x86/platform/uv/BAU: Disable BAU on single hub configurations
  x86/platform/intel-mid: Fix a format string overflow warning
  x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG
  x86/build: Silence the build with "make -s"
  x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl
  x86/fpu/math-emu: Avoid bogus -Wint-in-bool-context warning
  x86/fpu/math-emu: Fix possible uninitialized variable use
  perf/x86: Shut up false-positive -Wmaybe-uninitialized warning
  x86/defconfig: Remove stale, old Kconfig options
  x86/ioapic: Pass the correct data to unmask_ioapic_irq()
  x86/acpi: Prevent out of bound access caused by broken ACPI tables
  x86/mm, KVM: Fix warning when !CONFIG_PREEMPT_COUNT
  x86/platform/uv/BAU: Fix congested_response_us not taking effect
  x86/cpu: Use indirect call to measure performance in init_amd_k6()

Pull timer fix from Ingo Molnar:
 "A timer_irq_init() clocksource API robustness fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctly

Pull scheduler fixes from Ingo Molnar:
 "A cputime fix and code comments/organization fix to the deadline
  scheduler"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix confusing comments about selection of top pi-waiter
  sched/cputime: Don't use smp_processor_id() in preemptible context

Pull perf fixes from Ingo Molnar:
 "Two hw-enablement patches, two race fixes, three fixes for regressions
  of semantics, plus a number of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add proper condition to run sched_task callbacks
  perf/core: Fix locking for children siblings group read
  perf/core: Fix scheduling regression of pinned groups
  perf/x86/intel: Fix debug_store reset field for freq events
  perf/x86/intel: Add Goldmont Plus CPU PMU support
  perf/x86/intel: Enable C-state residency events for Apollo Lake
  perf symbols: Accept zero as the kernel base address
  Revert "perf/core: Drop kernel samples even though :u is specified"
  perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
  perf evsel: State in the default event name if attr.exclude_kernel is set
  perf evsel: Fix attr.exclude_kernel setting for default cycles:p

Pull locking fixlet from Ingo Molnar:
 "Remove an unnecessary priority adjustment in the rtmutex code"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Remove unnecessary priority adjustment

We must set fl->dsaddr once, and once only, even if there are multiple
processes calling filelayout_check_deviceid() for the same layout
segment.
Reported-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Pull irq fixes from Ingo Molnar:
 "A resume_irq() fix, plus a number of static declaration fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/digicolor: Drop unnecessary static
  irqchip/mips-cpu: Drop unnecessary static
  irqchip/gic/realview: Drop unnecessary static
  irqchip/mips-gic: Remove population of irq domain names
  genirq/PM: Properly pretend disabled state when force resuming interrupts

Pull core fixes from Ingo Molnar:
 "A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debug: Fix WARN_ON_ONCE() for modules
  MAINTAINERS: Update the PTRACE entry

When mapping a directory, we want the MAY_WRITE permissions to reflect
whether or not we have permission to modify, add and delete the directory
entries. MAY_EXEC must map to lookup permissions.

On the other hand, for files, we want MAY_WRITE to reflect a permission
to modify and extend the file.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Commit 3d476263 ("tcp: remove poll() flakes when receiving
RST") in v4.12 changed the order in which ->sk_state_change()
and ->sk_error_report() are called when a socket is shut
down - sk_state_change() is now called first.

This causes xs_tcp_state_change() -> xs_sock_mark_closed() ->
xprt_disconnect_done() to wake all pending tasked with -EAGAIN.
When the ->sk_error_report() callback arrives, it is too late to
pass the error on, and it is lost.

As easy way to demonstrate the problem caused is to try to start
rpc.nfsd while rcpbind isn't running.
nfsd will attempt a tcp connection to rpcbind.  A ECONNREFUSED
error is returned, but sunrpc code loses the error and keeps
retrying.  If it saw the ECONNREFUSED, it would abort.

To fix this, handle the sk->sk_err in the TCP_CLOSE branch of
xs_tcp_state_change().

Fixes: 3d476263 ("tcp: remove poll() flakes when receiving RST")
Cc: stable@vger.kernel.org (v4.12)
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Array size of mnt3_counts should be the size of array
mnt3_procedures, not mnt_procedures, though they're same in size
right now. Found this by code inspection.

Fixes: 1c5876dd ("sunrpc: move p_count out of struct rpc_procinfo")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NEryu Guan <eguan@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each device node.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Link: http://lkml.kernel.org/r/20170718214339.7774-7-robh@kernel.org
[ Clarify the error message while at it, as 'node' is ambiguous. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>