We already use pci_flags, so this just sets pci_flags directly and removes
the intermediate step of figuring out pci_probe_only, then using it to set
pci_flags.

The PCI core provides a pci_flags definition (currently __weak), so drop
the powerpc definitions in favor of that.

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

pci_probe_only is set on ppc64 to prevent resource re-allocation
by the core. It's meant to be used in very specific circumstances
such as when operating under a hypervisor that may prevent such
re-allocation.

Instead of default to 1, we make it default to 0 and explicitly
set it in the few cases where we need it.

This fixes FSL PCI which wants it clear among others.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds support for p7IOC (and possibly other IODA v1 IO Hubs)
using OPAL v2 interfaces.

We completely take over resource assignment and assign them using an
algorithm that hands out device BARs in a way that makes them fit in
individual segments of the M32 window of the bridge, which enables us
to assign individual PEs to devices and functions.

The current implementation gives out a PE per functions on PCIe, and a
PE for the entire bridge for PCIe to PCI-X bridges.

This can be adjusted / fine tuned later.

We also setup DMA resources (32-bit only for now) and MSIs (both 32-bit
and 64-bit MSI are supported).

The DMA allocation tries to divide the available 256M segments of the
32-bit DMA address space "fairly" among PEs. This is done using a
"weight" heuristic which assigns less value to things like OHCI USB
controllers than, for example SCSI RAID controllers. This algorithm
will probably want some fine tuning for specific devices or device
types.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

It advertises "host bridge" instead of "PCI to PCI bridge" which confuses
the Linux probe code.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is used for newer IO Hubs such as p7IOC.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The firmware doesn't wait after lifting the PCI reset. However it does
timestamp it in the device tree. We use that to ensure we wait long
enough (3s is our current arbitrary setting) from that timestamp to
actually probing the bus.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This implements support for MSIs on p5ioc2 PHBs. We only support
MSIs on the PCIe PHBs, not the PCI-X ones as the later hasn't been
properly verified in HW.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds support for PCI-X and PCIe on the p5ioc2 IO hub using
OPAL. This includes allocating & setting up TCE tables and config
space access routines.

This also supports fallbacks via RTAS when OPAL is absent, using
legacy TCE format pre-allocated via the device-tree (BML style)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>