Put in counts to tell which ips belong to what context.

  -----
   | |  hv
   | --
nr | |  kernel
   | --
   | |  user
  -----
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.493101305@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Follow the example set by powerpc and try to play nice with oprofile
and the nmi watchdog.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.459968444@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide the x86 perf_callchain() implementation.

Code based on the ftrace/sysprof code from Soeren Sandmann Pedersen.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: Soeren Sandmann Pedersen <sandmann@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Orig-LKML-Reference: <20090330171024.341993293@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that Paul cleaned up the error propagation paths, pass down the
x86 error as well.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.792822360@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While going over the wakeup code I noticed delayed wakeups only work
for hardware counters but basically all software counters rely on
them.

This patch unifies and generalizes the delayed wakeup to fix this
issue.

Since we're dealing with NMI context bits here, use a cmpxchg() based
single link list implementation to track counters that have pending
wakeups.

[ This should really be generic code for delayed wakeups, but since we
  cannot use cmpxchg()/xchg() in generic code, I've let it live in the
  perf_counter code. -- Eric Dumazet could use it to aggregate the
  network wakeups. ]

Furthermore, the x86 method of using TIF flags was flawed in that its
quite possible to end up setting the bit on the idle task, loosing the
wakeup.

The powerpc method uses per-cpu storage and does appear to be
sufficient.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.153932974@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since the bitfields turned into a bit of a mess, remove them and rely on
good old masks.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.059499915@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Having 3 slightly different copies of the same code around does nobody
any good. First step in revamping the output format.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.929962222@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: modify ABI

The hardware/software classification in hw_event->type became a little
strained due to the addition of tracepoint tracing.

Instead split up the field and provide a type field to explicitly specify
the counter type, while using the event_id field to specify which event to
use.

Raw counters still work as before, only the raw config now goes into
raw_event.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.836807573@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix for powerpc

Commit bd753921015e7905 ("perf_counter: software counter event
infrastructure") introduced a use of TIF_PERF_COUNTERS into the core
perfcounter code.  This breaks the build on powerpc because we use
a flag in a per-cpu area to signal wakeups on powerpc rather than
a thread_info flag, because the thread_info flags have to be
manipulated with atomic operations and are thus slower than per-cpu
flags.

This fixes the by changing the core to use an abstracted
set_perf_counter_pending() function, which is defined on x86 to set
the TIF_PERF_COUNTERS flag and on powerpc to set the per-cpu flag
(paca->perf_counter_pending).  It changes the previous powerpc
definition of set_perf_counter_pending to not take an argument and
adds a clear_perf_counter_pending, so as to simplify the definition
on x86.

On x86, set_perf_counter_pending() is defined as a macro.  Defining
it as a static inline in arch/x86/include/asm/perf_counters.h causes
compile failures because <asm/perf_counters.h> gets included early in
<linux/sched.h>, and the definitions of set_tsk_thread_flag etc. are
therefore not available in <asm/perf_counters.h>.  (On powerpc this
problem is avoided by defining set_perf_counter_pending etc. in
<asm/hw_irq.h>.)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Impact: fix boot crash on Intel Perfmon Version 1 systems

Intel Perfmon v1 does not support the global MSRs, nor does
it offer the generalized MSR ranges. So support v2 and later
CPUs only.

Also mark pmc_ops as read-mostly - to avoid false cacheline
sharing.

Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide separate sw counters for major and minor page faults.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We use the generic software counter infrastructure to provide
page fault events.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix a build warning on 32bit machines by explicitly marking the
constants as 64-bit.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We need to ensure the enabled=0 write happens before we
start disabling the actual counters, so that a pcm_amd_enable()
will not enable one underneath us.

I think the race is impossible anyway, we always balance the
ops within any one context and perform enable() with IRQs disabled.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

No need to assume the irq_period is 32bit.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

All logical processors with APIC ID values of 255 and greater will have their
APIC reported through Processor X2APIC structure (type-9 entry type) and all
logical processors with APIC ID less than 255 will have their APIC reported
through legacy Processor Local APIC (type-0 entry type) only. This is the
same case even for NMI structure reporting.
    
The Processor X2APIC Affinity structure provides the association between the
X2APIC ID of a logical processor and the proximity domain to which the logical
processor belongs.
    
For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device()
objects in the ACPI namespace.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The MTRR code grew a new debug message which triggers commonly:

[   40.142276]   get_mtrr: cpu0 reg00 base=0000000000 size=0000080000 write-back
[   40.142280]   get_mtrr: cpu0 reg01 base=0000080000 size=0000040000 write-back
[   40.142284]   get_mtrr: cpu0 reg02 base=0000100000 size=0000040000 write-back
[   40.142311]   get_mtrr: cpu0 reg00 base=0000000000 size=0000080000 write-back
[   40.142314]   get_mtrr: cpu0 reg01 base=0000080000 size=0000040000 write-back
[   40.142317]   get_mtrr: cpu0 reg02 base=0000100000 size=0000040000 write-back

Remove this annoyance.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

pci mmap code was doing memtype reserve for a while now. Recently we
added memtype tracking in remap_pfn_range, and pci code indirectly calls
remap_pfn_range. So, we don't need seperate tracking in pci code
anymore. Which means a patch that removes ~50 lines of code :-).

Also, recently we found out that the pci tracking is not working as we expect
it to work in some cases. Specifically, userlevel X mmap of pci, with some
recent version of X, is having a problem with vm_page_prot getting reset.
The pci tracking uses vm_page_prot to pass on the protection type from parent
to child during fork.
a) Parent does a pci mmap
b) We look at PAT and get either UC_MINUS or WC mapping for parent
c) Store that mapping type in vma vm_page_prot for future use
d) This thread does a fork
e) Fork results in mmap_ops ->open for the child process
f) We get the vm_page_prot from vma and reserve that type for the child process

But, between c) and e) above, the vma vm_page_prot is getting reset to zero.
This results in PAT reserve failing at the time of fork as in here.
http://marc.info/?l=linux-kernel&m=123858163103240&w=2

This cleanup makes the above problem go away as we do not depend on
vm_page_prot in our PAT code anymore.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The __restore_processor_state() fn restores %gs on resume from S3.  As
such, it cannot be protected by the stack-protector guard since %gs will
not be correct on function entry.

There are only a few other fns in this file and it should not negatively
impact kernel security that they will also have the stack-protector
guard removed (and so it's not worth moving them to another file).

Without this change, S3 resume on a kernel built with
CONFIG_CC_STACKPROTECTOR_ALL=y will fail.
Signed-off-by: NJoseph Cihula <joseph.cihula@intel.com>
Tested-by: NChris Wright <chrisw@sous-sol.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <49D13385.5060900@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 7ca43e75 ("mm: use debug_kmap_atomic")
introduced some debug_kmap_atomic() in wrong places.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i386 allnoconfig:

 arch/x86/mm/iomap_32.c: In function 'is_io_mapping_possible':
 arch/x86/mm/iomap_32.c:27: warning: comparison is always false due to limited range of data type
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

update ACPI Development Discussion List
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Impact: code size reduction (possibly critical)

The x86 boot and decompression code has no use of the branch profiling
constructs, so disable them.  This would bloat the setup code by as
much as 14K, eating up a fairly large chunk of the 32K area we are
guaranteed to have.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: unification of pci-dma macros and pci_32.h removal

This patch unifies the definition of the pci_unmap_addr*, pci_unmap_len*
and DECLARE_PCI_UNMAP* macros. This makes sense because the pci_unmap
functions are no longer no-ops anymore when the kernel runs with
CONFIG_DMA_API_DEBUG. Without an iommu or DMA_API_DEBUG it is a no-op on 32 bit
because the dma mapping path returns a physical address and therefore the
dma-api implementation has no internal state which needs to be destroyed with
an unmap call.
This unification also simplifies the port of x86_64 iommu drivers to 32 bit x86
and let us get rid of pci_32.h.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>

Pass the original flags to rwlock arch-code, so that it can re-enable
interrupts if implemented for that architecture.

Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs
which just do the same thing as non-flags variants.
Signed-off-by: NPetr Tesarik <ptesarik@suse.cz>
Signed-off-by: NRobin Holt <holt@sgi.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds preadv and pwritev system calls.  These syscalls are a
pretty straightforward combination of pread and readv (same for write).
They are quite useful for doing vectored I/O in threaded applications.
Using lseek+readv instead opens race windows you'll have to plug with
locking.

Other systems have such system calls too, for example NetBSD, check
here: http://www.daemon-systems.org/man/preadv.2.html

The application-visible interface provided by glibc should look like
this to be compatible to the existing implementations in the *BSD family:

  ssize_t preadv(int d, const struct iovec *iov, int iovcnt, off_t offset);
  ssize_t pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset);

This prototype has one problem though: On 32bit archs is the (64bit)
offset argument unaligned, which the syscall ABI of several archs doesn't
allow to do.  At least s390 needs a wrapper in glibc to handle this.  As
we'll need a wrappers in glibc anyway I've decided to push problem to
glibc entriely and use a syscall prototype which works without
arch-specific wrappers inside the kernel: The offset argument is
explicitly splitted into two 32bit values.

The patch sports the actual system call implementation and the windup in
the x86 system call tables.  Other archs follow as separate patches.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add macros for using the UV hub to send interrupts.  Change the IPI code
to use these macros.  These macros will also be used in additional patches
that will follow.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add definitions for x86_64 GRU MMRs.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Eliminate compile errors on 32-bit X86 caused by UV.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Container-init must behave like global-init to processes within the
container and hence it must be immune to unhandled fatal signals from
within the container (i.e SIG_DFL signals that terminate the process).

But the same container-init must behave like a normal process to processes
in ancestor namespaces and so if it receives the same fatal signal from a
process in ancestor namespace, the signal must be processed.

Implementing these semantics requires that send_signal() determine pid
namespace of the sender but since signals can originate from workqueues/
interrupt-handlers, determining pid namespace of sender may not always be
possible or safe.

This patchset implements the design/simplified semantics suggested by
Oleg Nesterov.  The simplified semantics for container-init are:

	- container-init must never be terminated by a signal from a
	  descendant process.

	- container-init must never be immune to SIGKILL from an ancestor
	  namespace (so a process in parent namespace must always be able
	  to terminate a descendant container).

	- container-init may be immune to unhandled fatal signals (like
	  SIGUSR1) even if they are from ancestor namespace. SIGKILL/SIGSTOP
	  are the only reliable signals to a container-init from ancestor
	  namespace.

This patch:

Based on an earlier patch submitted by Oleg Nesterov and comments from
Roland McGrath (http://lkml.org/lkml/2008/11/19/258).

The handler parameter is currently unused in the tracehook functions.
Besides, the tracehook functions are called with siglock held, so the
functions can check the handler if they later need to.

Removing the parameter simiplifies changes to sig_ignored() in a follow-on
patch.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

First argument unused since 2.3.11.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a build failure with generic debug pagealloc:

  mm/debug-pagealloc.c: In function 'set_page_poison':
  mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: In function 'clear_page_poison':
  mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: In function 'page_poison':
  mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: At top level:
  mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages'
  include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here
  mm/debug-pagealloc.c: In function 'kernel_map_pages':
  mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function)

by fixing

 - debug_flags should be in struct page
 - define DEBUG_PAGEALLOC config option for all architectures
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reported-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: fix CONFIG_DEBUG_HIGHMEM=y breakage

Commit 7ca43e75 ("mm: use debug_kmap_atomic") introduced some
debug_kmap_atomic() calls in the wrong places.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090402070126.GA3951@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

those code pcpu_need_numa(), should be removed.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid Miller <davem@davemloft.net>
LKML-Reference: <49D31770.9090502@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

setup_percpu_remap() is for NUMA machines yet it bailed out with
-EINVAL if pcpu_need_numa().  Fix the inverted condition.

This problem was reported by David Miller and verified by Yinhai Lu.
Reported-by: NDavid Miller <davem@davemloft.net>
Reported-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NTejun Heo <tj@kernel.org>
LKML-Reference: <49D30469.8020006@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: BIOS bug safety

For pre-ACPI 3 BIOSes, pre-initialize the end of the e820 buffer just
in case the BIOS returns an unchanged %ecx but without actually
touching the ACPI 3 extended flags field.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Remove unused/duplicate cruft from asm/suspend.h:

 - x86_32: remove unused acpi code
 - powerpc: remove duplicate prototypes, see linux/suspend.h
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the following header file changes:

 - remove arch ifdefs and asm/suspend.h from linux/suspend.h
 - add asm/suspend.h to disk.c (for arch_prepare_suspend())
 - add linux/io.h to swsusp.c (for ioremap())
 - x86 32/64 bit compile fixes
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use debug_kmap_atomic in kmap_atomic, kmap_atomic_pfn, and
iomap_atomic_prot_pfn.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

x86 has debug_kmap_atomic_prot() which is error checking function for
kmap_atomic.  It is usefull for the other architectures, although it needs
CONFIG_TRACE_IRQFLAGS_SUPPORT.

This patch exposes it to the other architectures.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>