- 01 3月, 2008 15 次提交
-
-
由 Pavel Emelyanov 提交于
Some netfilter code and rxrpc one use seq_open() to open a proc file, but seq_release_private to release one. This is harmless, but ambiguous. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
These two also perform manual seq_open_private, so patch them both at once. But unlike ATM code, these already use the seq_release_private, so I splitted this patch from the previous one. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
lec_seq_open/lec_seq_release and __vcc_seq_open/vcc_seq_release do seq_open/release_private's job. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fixes: ERROR: "sk_release_kernel" [net/ipv6/ipv6.ko] undefined! Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
All preparations are done. Now just add a hook to perform an initialization on namespace startup and replace icmpv6_sk macro with proper inline call. Actual namespace the packet belongs too will be passed later along with the one for the routing. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
All preparations are done. Now just add a hook to perform an initialization on namespace startup and replace icmp_sk macro with proper inline call. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
So, change icmp(v6)_sk creation/disposal to the scheme used in the netlink for rtnl, i.e. create a socket in the context of the init_net and assign the namespace without getting a referrence later. Also use sk_release_kernel instead of sock_release to properly destroy such sockets. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This staff will be needed for non-netlink kernel sockets, which should also not pin a namespace like tcp_socket and icmp_socket. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Merge it to netlink_kernel_release. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Own __icmp(v6)_sk should be present in each namespace. So, it should be allocated dynamically. Though, alloc_percpu does not fit the case as it implies additional dereferrence for no bonus. Allocate data for pointers just like __percpu_alloc_mask does and place pointers to struct sock into this array. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
We have to get socket lock inside icmp(v6)_xmit_lock/unlock. The socket is get from global variable now. When this code became namespaces, one should pass a namespace and get socket from it. Though, above is useless. Socket is available in the caller, just pass it inside. This saves a bit of code now and saves more later. add/remove: 0/0 grow/shrink: 1/3 up/down: 1/-169 (-168) function old new delta icmp_rcv 718 719 +1 icmpv6_rcv 2343 2303 -40 icmp_send 1566 1518 -48 icmp_reply 549 468 -81 Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Basically, there is no difference, what to store: socket or sock. Though, sock looks better as there will be 1 less dereferrence on the fast path. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Use this macro only once in a function to save a bit of space. add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-98 (-98) function old new delta icmp_reply 562 561 -1 icmp_push_reply 305 258 -47 icmp_init 273 223 -50 Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
icmp_init could fail and this is normal for namespace other than initial. So, the panic should be triggered only on init_net initialization path. Additionally create rollback path for icmp_init as a separate function. It will also be used later during namespace destruction. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
struct net_proto_family* is not used in icmp[v6]_init, ndisc_init, igmp_init and tcp_v4_init. Remove it. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 2月, 2008 25 次提交
-
-
由 Timo Teras 提交于
Change xfrm_policy and xfrm_state walking algorithm from O(n^2) to O(n). This is achieved adding the entries to one more list which is used solely for walking the entries. This also fixes some races where the dump can have duplicate or missing entries when the SPD/SADB is modified during an ongoing dump. Dumping SADB with 20000 entries using "time ip xfrm state" the sys time dropped from 1.012s to 0.080s. Signed-off-by: NTimo Teras <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch removes the no longer used EXPORT_SYMBOL_GPL(ip6_find_1stfragopt). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matheos Worku 提交于
Ports 0 and 1 of the NIU device are connected to extended fabric through SERDES. Ports 2 and 3 are connected using RGMII Fiber mode. [ Coding style cleanups... -DaveM ] Signed-off-by: NMatheos Worku <matheos.worku@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Juha-Matti Tapio 提交于
Skip the prefix length matching in source address selection for orchid -> non-orchid addresses. Overlay Routable Cryptographic Hash IDentifiers (RFC 4843, 2001:10::/28) are currenty not globally reachable. Without this check a host with an ORCHID address can end up preferring those over regular addresses when talking to other regular hosts in the 2001::/16 range thus breaking non-orchid connections. Signed-off-by: NJuha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Juha-Matti Tapio 提交于
Add a new label for Overlay Routable Cryptographic Hash Identifiers (RFC 4843) prefix 2001:10::/28 to help proper source address selection. ORCHID addresses are used by for example Host Identity Protocol. They are global and routable, but they currently need support from both endpoints and therefore mixing regular and ORCHID addresses for source and destination is a bad idea in general case. Signed-off-by: NJuha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The context is available from a network device passed in. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Add namespace parameter to devinet_ioctl and locate device inside it for state changes. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Show routing cache for a particular namespace only. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
In the other case /proc/net/rt_cache will look inconsistent in respect to genid. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Device inside the namespace can be started and downed. So, active routing cache should be cleaned up on device stop. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
After all these preparations it is time to enable main IPv4 device initialization routine inside namespace. It is safe do this now. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Do not calls hooks from device notifiers and disallow configuration from ioctl/netlink layer. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Default ARP parameters should be findable regardless of the context. Required to make inetdev_event working. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
neigh_sysctl_register should register sysctl entries inside correct namespace to avoid naming conflict. Typical example is a loopback. Entries for it present in all namespaces. Required to make inetdev_event working. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
ip_fib_init is kept enabled. It is already namespace-aware. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
They do exactly the same job. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This is a callback registered to inet address notifier chain. The check is useless as: - ifa->ifa_dev is always != NULL - similar checks are abscent in all other notifiers. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This is a callback registered to inet address notifier chain. The check is useless as: - ifa is always != NULL - similar checks are abscent in all other notifiers. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-