- 22 10月, 2014 4 次提交
-
-
由 Aneesh Kumar K.V 提交于
arch/powerpc/mm/slice.c:704:5: error: expected identifier or ‘(’ before numeric constant int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, ^ make[1]: *** [arch/powerpc/mm/slice.o] Error 1 make: *** [arch/powerpc/mm/slice.o] Error 2 This got introduced via 1217d34b "powerpc: Ensure global functions include their prototype". We started including linux/hugetlb.h with that patch and now we have #define is_hugepage_only_range(mm, addr, len) 0 with hugetlbfs disabled. Fixes: 1217d34b ("powerpc: Ensure global functions include their prototype") Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target updates from Nicholas Bellinger: "Here are the target updates for v3.18-rc2 code. These where originally destined for -rc1, but due to the combination of travel last week for KVM Forum and my mistake of taking the three week merge window literally, the pull request slipped.. Apologies for that. Things where reasonably quiet this round. The highlights include: - New userspace backend driver (target_core_user.ko) by Shaohua Li and Andy Grover - A number of cleanups in target, iscsi-taret and qla_target code from Joern Engel - Fix an OOPs related to queue full handling with CHECK_CONDITION status from Quinn Tran - Fix to disable TX completion interrupt coalescing in iser-target, that was causing problems on some hardware - Fix for PR APTPL metadata handling with demo-mode ACLs I'm most excited about the new backend driver that uses UIO + shared memory ring to dispatch I/O and control commands into user-space. This was probably the most requested feature by users over the last couple of years, and opens up a new area of development + porting of existing user-space storage applications to LIO. Thanks to Shaohua + Andy for making this happen. Also another honorable mention, a new Xen PV SCSI driver was merged via the xen/tip.git tree recently, which puts us now at 10 target drivers in upstream! Thanks to David Vrabel + Juergen Gross for their work to get this code merged" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) target/file: fix inclusive vfs_fsync_range() end iser-target: Disable TX completion interrupt coalescing target: Add force_pr_aptpl device attribute target: Fix APTPL metadata handling for dynamic MappedLUNs qla_target: don't delete changed nacls target/user: Recalculate pad size inside is_ring_space_avail() tcm_loop: Fixup tag handling iser-target: Fix smatch warning target/user: Fix up smatch warnings in tcmu_netlink_event target: Add a user-passthrough backstore target: Add documentation on the target userspace pass-through driver uio: Export definition of struct uio_device target: Remove unneeded check in sbc_parse_cdb target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE qla_target: rearrange struct qla_tgt_prm qla_target: improve qlt_unmap_sg() qla_target: make some global functions static qla_target: remove unused parameter target: simplify core_tmr_abort_task target: encapsulate smp_mb__after_atomic() ...
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
Pull email address change from Boaz Harrosh. * 'for-linus' of git://git.open-osd.org/linux-open-osd: Boaz Harrosh - fix email in Documentation Boaz Harrosh - Fix broken email address MAINTAINERS: Change Boaz Harrosh's email
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox framework from Jassi Brar: "A framework for Mailbox controllers and clients have been cooking for more than a year now. Everybody in the CC list had been copied on patchset revisions and most of them have made sounds of approval, though just one concrete Reviewed-by. The patchset has also been in linux-next for a couple of weeks now and no conflict has been reported. The framework has the backing of at least 5 platforms, though I can't say if/when they upstream their drivers (some businesses have 'changed')" (Further acked-by by Arnd Bergmann and Suman Anna in the pull request thread) * 'mailbox-for-linus' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt: mailbox: add generic bindings doc: add documentation for mailbox framework mailbox: Introduce framework for mailbox mailbox: rename pl320-ipc specific mailbox.h
-
- 21 10月, 2014 32 次提交
-
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog updates from Wim Van Sebroeck: - new Cadence WDT driver - new Ricoh RN5T618 watchdog - new DA9063 PMIC watchdog driver - new Meson WDT driver - add restart handling code - fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (25 commits) watchdog: meson: remove magic value for reboot watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM watchdog: sunxi: Add A31 watchdog support watchdog: sunxi: support parameterized compatible strings watchdog: imx2_wdt: add restart handler support watchdog: qcom: register a restart notifier watchdog: s3c2410: add restart handler watchdog: dw_wdt: add restart handler support ARM: defconfig: update multi_v7_defconfig ARM: meson: add watchdog driver ARM: docs: add documentation binding for meson watchdog stmp3xxx_rtc_wdt: Add suspend/resume PM support watchdog: Add DA9063 PMIC watchdog driver. watchdog: add driver for Ricoh RN5T618 watchdog watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7 watchdog: qcom: document device tree bindings watchdog: qcom: add support for KPSS WDT watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top() devicetree: Add Cadence WDT devicetree bindings documentation watchdog: Add Cadence WDT driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED update from Bryan Wu: "Basically we have some bug fixing and clean up and one big thing is we start to merge patch to add support LED Flash class" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: gpio: cleanup the leds-gpio driver led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error. led: gpio: Sort include headers alphabetically leds: Improve and export led_update_brightness leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor function may sleep leds: lp3944: fix sparse warning leds: avoid using DEVICE_ATTR macro for max_brightness attribute leds: make brightness type consistent across whole subsystem leds: Reorder include directives
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "There are no new drivers here, only a couple of fixes all over the place" * tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Let PWM_CLPS711X depend on HAS_IOMEM pwm: atmel: Fix calculation of prescale value pwm: Fix uninitialized warnings in pwm_get() pwm: rockchip: Allow polarity invert on rk3288 pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2 pwm: imx: Cleanup indentation for register definitions pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definition pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error. pwm: lpss: make it buildable only on X86 pwm: lpss: use c99 initializers in structures pwm: lpss: Fix build failure on PowerPC pwm: lpss: pci: Move to use pcim_enable_device() pwm: lpss: Properly split driver to parts pwm: lpss: Add ACPI and PCI IDs for Intel Braswell pwm: fsl-ftm: Select REGMAP_MMIO pwm: fsl-ftm: Document 'big-endian' property pwm: fsl-ftm: Convert to direct regmap API usage pwm: fsl-ftm: Clean up the code
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: "Sorry for the late pull request. Current stuff was ready for a while but I was hoping to squeeze in support for almost ready ARC SDP platform (and avoid a 2nd pull request), however it seems there are still some loose ends which warrant more time. - Platform code reduction/moving-up (TB10X no longer needs any callbacks) - updated boot printing - kgdb update for arc gdb 7.5 - bug fixes (some marked for stable) - more code refactoring/consolidation" * tag 'arc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: boot: cpu feature print enhancements ARC: boot: consolidate cross-checking of h/w and s/w ARC: unbork FPU save/restore ARC: remove extraneous __KERNEL__ guards ARC: Update order of registers in KGDB to match GDB 7.5 ARC: Remove unneeded Kconfig entry NO_DMA ARC: BUG() dumps stack after @msg (@msg now same as in generic BUG)) ARC: refactoring: reduce the scope of some local vars ARC: remove gcc mpy heuristics ARC: RIP @running_on_hw ARC: Update comments about uncached address space ARC: rename kconfig option for unaligned emulation ARC: [nsimosci] Allow "headless" models to boot ARC: [arcfpga] Get rid of ARC_BOARD_ANGEL4 and ARC_BOARD_ML509 ARC: [arcfpga] Remove more dead code ARC: [plat*] move code out of .init_machine into common ARC: [arcfpga] consolidate machine description, DT ARC: Allow SMP kernel to build/boot on UP-only infrastructure
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux由 Linus Torvalds 提交于
Pull more powerpc updates from Michael Ellerman: "Here's some more updates for powerpc for 3.18. They are a bit late I know, though must are actually bug fixes. In my defence I nearly cut the top of my finger off last weekend in a gruesome bike maintenance accident, so I spent a good part of the week waiting around for doctors. True story, I can send photos if you like :) Probably the most interesting fix is the sys_call_table one, which enables syscall tracing for powerpc. There's a fix for HMI handling for old firmware, more endian fixes for firmware interfaces, more EEH fixes, Anton fixed our routine that gets the current stack pointer, and a few other misc bits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (22 commits) powerpc: Only do dynamic DMA zone limits on platforms that need it powerpc: sync pseries_le_defconfig with pseries_defconfig powerpc: Add printk levels to setup_system output powerpc/vphn: NUMA node code expects big-endian powerpc/msi: Use WARN_ON() in msi bitmap selftests powerpc/msi: Fix the msi bitmap alignment tests powerpc/eeh: Block CFG upon frozen Shiner adapter powerpc/eeh: Don't collect logs on PE with blocked config space powerpc/eeh: Block PCI config access upon frozen PE powerpc/pseries: Drop config requests in EEH accessors powerpc/powernv: Drop config requests in EEH accessors powerpc/eeh: Rename flag EEH_PE_RESET to EEH_PE_CFG_BLOCKED powerpc/eeh: Fix condition for isolated state powerpc/pseries: Make CPU hotplug path endian safe powerpc/pseries: Use dump_stack instead of show_stack powerpc: Rename __get_SP() to current_stack_pointer() powerpc: Reimplement __get_SP() as a function not a define powerpc/numa: Add ability to disable and debug topology updates powerpc/numa: check error return from proc_create powerpc/powernv: Fallback to old HMI handling behavior for old firmware ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "One patch to enable the BPF system call and three more bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uprobes: fix kprobes dependency s390: wire up bpf syscall s390/mm: fixing calls of pte_unmap_unlock s390/hmcdrv: Restrict s390 HMC driver to S390 arch
-
由 Carlo Caione 提交于
This patch removes the magic value used for rebooting the board. This value is useless and leads to a static checker warning as reported by Dan Carpenter. Signed-off-by: NCarlo Caione <carlo@caione.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Chen Gang 提交于
They need HAS_IOMEM, so let them depend on it, the related error (with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap_resource" [drivers/watchdog/tegra_wdt.ko] undefined! ERROR: "devm_ioremap_resource" [drivers/watchdog/of_xilinx_wdt.ko] undefined! Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Chen-Yu Tsai 提交于
This patch adds support for the watchdog hardware found in A31 and newer SoCs. This new hardware has registers at different offsets, and the system reset control has been split out of the "mode" register into a new "configuration" register. Differences not supported by this driver include separate interrupt lines for each watchdog, instead of sharing an interrupt line and registers with the timer block. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Chen-Yu Tsai 提交于
This patch adds support for hardware parameters tied to compatible strings, so similar hardware can reuse the driver. This will be used to support the newer watchdog found in A31 and later SoCs. Differences in the new hardware include separate interrupt lines for each watchdog, and corresponding interrupt control/status registers. Watchdog control registers were also slightly rearranged. Also replace ioread32()/iowrite32() with readl()/writel() in various places changed. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Jingchang Lu 提交于
Register the watchdog as the system restart function to the new introducing kernel restart call chain in the driver instead of providing the restart in machine desc. This restart handler function is from the mxc_restart() in arch/arm/mach-imx/system.c Signed-off-by: NJingchang Lu <jingchang.lu@freescale.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Josh Cartwright 提交于
The WDT's BITE_TIME warm-reset behavior can be leveraged as a last resort mechanism for triggering chip reset. Usually, other restart methods (such as PS_HOLD) are preferrable for issuing a more complete reset of the chip. As such, keep the priority of the watchdog notifier low. Signed-off-by: NJosh Cartwright <joshc@codeaurora.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Heiko Stuebner 提交于
On a lot of Samsung systems the watchdog is responsible for restarting the system and until now this code was contained in plat-samsung/watchdog-reset.c. With the introduction of the restart handlers, this code can now move into driver itself, removing the need for arch-specific code. Tested on a S3C2442 based GTA02 Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Jisheng Zhang 提交于
The kernel core now provides an API to trigger a system restart. Register with it to support restarting the system via. watchdog. Signed-off-by: NJisheng Zhang <jszhang@marvell.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Carlo Caione 提交于
Update the multi_v7_defconfig enabling the watchdog driver for Meson SoCs. Signed-off-by: NCarlo Caione <carlo@caione.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Carlo Caione 提交于
This patch adds the watchdog driver for the Amlogic Meson SoCs used also to reboot the device. Signed-off-by: NCarlo Caione <carlo@caione.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Carlo Caione 提交于
Signed-off-by: NCarlo Caione <carlo@caione.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Janusz Uzycki 提交于
There is no conflict with rtc/rtc-stmp3xxx.c parent because modified registers in PM functions of stmp3xxx_rtc_wdt are different. Signed-off-by: NJanusz Uzycki <j.uzycki@elproma.com.pl> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Krystian Garbaciak 提交于
This driver supports the watchdog device inside the DA9063 PMIC. Signed-off-by: NKrystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Acked-by: NSteve Twiss <stwiss.opensource@diasemi.com> Tested-by: NSteve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Beniamino Galvani 提交于
This adds a driver for the watchdog timer available in Ricoh RN5T618 PMIC. The device supports a programmable expiration time of 1, 8, 32 or 128 seconds. Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Naveen Krishna Chatradhi 提交于
Exynos7 SoC has a Watchdog for Atlas (A57) cores This patch adds support for the Atlas watchdog. Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Josh Cartwright 提交于
The Qualcomm Krait Processor Sub-system (KPSS) contains one or more instances of the WDT. Provide documentation on how to describe these in the device tree. Signed-off-by: NJosh Cartwright <joshc@codeaurora.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Josh Cartwright 提交于
Add a driver for the watchdog timer block found in the Krait Processor Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064. Signed-off-by: NJosh Cartwright <joshc@codeaurora.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jisheng Zhang 提交于
The TOP_INIT, ie bit 4-7 of the WDOG_TIMEOUT_RANGE_REG_OFFSET register may be zero, so the timeout period may be very short after initialization is done, thus the system may be reset soon after enabling. We fix this problem by also initialising the TOP_INIT when setting TOP in function dw_wdt_set_top(). Signed-off-by: NJisheng Zhang <jszhang@marvell.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Harini Katakam 提交于
Add cadence-wdt bindings documentation. Signed-off-by: NHarini Katakam <harinik@xilinx.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Harini Katakam 提交于
Add Cadence WDT driver. This is used by Xilinx Zynq. Signed-off-by: NHarini Katakam <harinik@xilinx.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-K=C3=B6nig <u.kleine-koenig@pengutronix.de> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Xiubo Li 提交于
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Mika Westerberg 提交于
There is no need to store the return value of misc_deregister() in a variable. Instead we can just return the value directly. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Pranith Kumar 提交于
Building booke_wdt fails when trying to build as a module as there is no early_param() in module. Fix by using module_param() instead of early_param(). Signed-off-by: NPranith Kumar <bobby.prani@gmail.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Michal Simek 提交于
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 updates from Ted Ts'o: "A large number of cleanups and bug fixes, with some (minor) journal optimizations" [ This got sent to me before -rc1, but was stuck in my spam folder. - Linus ] * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits) ext4: check s_chksum_driver when looking for bg csum presence ext4: move error report out of atomic context in ext4_init_block_bitmap() ext4: Replace open coded mdata csum feature to helper function ext4: delete useless comments about ext4_move_extents ext4: fix reservation overflow in ext4_da_write_begin ext4: add ext4_iget_normal() which is to be used for dir tree lookups ext4: don't orphan or truncate the boot loader inode ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT ext4: optimize block allocation on grow indepth ext4: get rid of code duplication ext4: fix over-defensive complaint after journal abort ext4: fix return value of ext4_do_update_inode ext4: fix mmap data corruption when blocksize < pagesize vfs: fix data corruption when blocksize < pagesize for mmaped data ext4: fold ext4_nojournal_sops into ext4_sops ext4: support freezing ext2 (nojournal) file systems ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs() ext4: don't check quota format when there are no quota files jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list jbd2: avoid pointless scanning of checkpoint lists ...
-
- 20 10月, 2014 4 次提交
-
-
由 Chen Gang 提交于
PWM_CLPS711X needs HAS_IOMEM, so depend on it, the related error (with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap_resource" [drivers/pwm/pwm-clps711x.ko] undefined! ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined! Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late" * tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: corrected bcm2835 search ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148 MAINTAINERS: Update Santosh Shilimkar's email id ARM: sunxi_defconfig: enable CONFIG_REGULATOR ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802
-
git://git.infradead.org/users/eparis/audit由 Linus Torvalds 提交于
Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...
-