- 05 10月, 2009 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: macintosh: Don't assume i2c device probing always succeeds i2c: Hide probe errors caused by ACPI resource conflicts i2c: Minor documentation update mfd: AB3100 drop unused module parameters Staging: IIO: tsl2561: Drop unused module parameters leds: leds-pca9532 - Drop unused module parameters ltc4215/ltc4245: Discard obsolete detect methods ds2482: Discard obsolete detect method max6875: Discard obsolete detect method i2c: Move misc devices documentation
-
由 Jean Delvare 提交于
If i2c device probing fails, then there is no driver to dereference after calling i2c_new_device(). Stop assuming that probing will always succeed, to avoid NULL pointer dereferences. We have an easier access to the driver anyway. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NTim Shepard <shep@alum.mit.edu> Cc: Colin Leroy <colin@colino.net>
-
由 Jean Delvare 提交于
When an ACPI resource conflict is detected, error messages are already printed by ACPI. There's no point in causing the driver core to print more error messages, so return one of the error codes for which no message is printed. This fixes bug #14293: http://bugzilla.kernel.org/show_bug.cgi?id=14293Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The sysfs path to i2c adapters has changed recently, update the documentation to reflect that change. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which implement device detection. The ab3100 driver doesn't, so there is no point in calling it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Cc: Samuel Ortiz <sameo@linux.intel.com>
-
由 Jean Delvare 提交于
The I2C_CLIENT_INSMOD macro is only useful for i2c drivers which implement device detection. The tsl2561 driver doesn't, so there is no point in calling it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Jonathan Cameron <jic23@cam.ac.uk>
-
由 Jean Delvare 提交于
The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which implement device detection. The leds-pca9532 driver doesn't, so there is no point in calling it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Riku Voipio <riku.voipio@iki.fi>
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the LTC4215 and LTC4245, as these devices can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callbacks. This shrinks the binary module sizes by 36% and 46%, respectively. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Ira W. Snyder <iws@ovro.caltech.edu>
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the DS2482, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This shrinks the binary module size by 21%. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NBen Gardner <gardner.ben@gmail.com>
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the MAX6875, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This basically divides the binary module size by 2. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBen Gardner <gardner.ben@gmail.com>
-
由 Jean Delvare 提交于
Some times ago the eeprom and max6875 drivers moved to drivers/misc/eeprom, but their documentation did not follow. It's finally time to get rid of Documentation/i2c/chips. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Ben Gardner <gardner.ben@gmail.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits) Revert "Seperate read and write statistics of in_flight requests" cfq-iosched: don't delay async queue if it hasn't dispatched at all block: Topology ioctls cfq-iosched: use assigned slice sync value, not default cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' cfq-iosched: implement slower async initiate and queue ramp up cfq-iosched: delay async IO dispatch, if sync IO was just done cfq-iosched: add a knob for desktop interactiveness Add a tracepoint for block request remapping block: allow large discard requests block: use normal I/O path for discard requests swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL fs/bio.c: move EXPORT* macros to line after function Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs cciss: fix build when !PROC_FS block: Do not clamp max_hw_sectors for stacking devices block: Set max_sectors correctly for stacking devices cciss: cciss_host_attr_groups should be const cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Add usage_count attribute to each logical drive in /sys ...
-
由 Jens Axboe 提交于
This reverts commit a9327cac. Corrado Zoccolo <czoccolo@gmail.com> reports: "with 2.6.32-rc1 I started getting the following strange output from "iostat -kx 2": Linux 2.6.31bisect (et2) 04/10/2009 _i686_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 10,70 0,00 3,16 15,75 0,00 70,38 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 18,22 0,00 0,67 0,01 14,77 0,02 43,94 0,01 10,53 39043915,03 2629219,87 sdb 60,89 9,68 50,79 3,04 1724,43 50,52 65,95 0,70 13,06 488437,47 2629219,87 avg-cpu: %user %nice %system %iowait %steal %idle 2,72 0,00 0,74 0,00 0,00 96,53 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 6,68 0,00 0,99 0,00 0,00 92,33 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 4,40 0,00 0,73 1,47 0,00 93,40 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 4,00 0,00 3,00 0,00 28,00 18,67 0,06 19,50 333,33 100,00 Global values for service time and utilization are garbage. For interval values, utilization is always 100%, and service time is higher than normal. I bisected it down to: [a9327cac] Seperate read and write statistics of in_flight requests and verified that reverting just that commit indeed solves the issue on 2.6.32-rc1." So until this is debugged, revert the bad commit. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We cannot delay for the first dispatch of the async queue if it hasn't dispatched at all, since that could present a local user DoS attack vector using an app that just did slow timed sync reads while filling memory. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 04 10月, 2009 15 次提交
-
-
git://www.linux-m32r.org/git/takata/linux-2.6_dev由 Linus Torvalds 提交于
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r: Fix IPI function calls for SMP m32r: Fix set_memory() for DISCONTIGMEM m32r: add rtc_lock variable m32r: define ioread* and iowrite* macros m32r: export delay loop symbols m32r: fix tme_handler
-
由 Linus Torvalds 提交于
A couple of people have hit the WARN_ON() in drivers/char/tty_io.c, tty_open() that is unhappy about seeing the tty line discipline go away during the tty hangup. See for example http://bugzilla.kernel.org/show_bug.cgi?id=14255 and the reason is that we do the tty_ldisc_halt() outside the ldisc_mutex in order to be able to flush the scheduled work without a deadlock with vhangup_work. However, it turns out that we can solve this particular case by - using "cancel_delayed_work_sync()" in tty_ldisc_halt(), which waits for just the particular work, rather than synchronizing with any random outstanding pending work. This won't deadlock, since the buf.work we synchronize with doesn't care about the ldisc_mutex, it just flushes the tty ldisc buffers. - realize that for this particular case, we don't need to wait for any hangup work, because we are inside the hangup codepaths ourselves. so as a result we can just drop the flush_scheduled_work() entirely, and then move the tty_ldisc_halt() call to inside the mutex. That way we never expose the partially torn down ldisc state to tty_open(), and hold the ldisc_mutex over the whole sequence. Reported-by: NIngo Molnar <mingo@elte.hu> Reported-by: NHeinz Diehl <htd@fancy-poultry.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Toshihiro HANAWA 提交于
This patch fixes the m32r SMP kernel after 2.6.27. A part of the following patch breaks m32r SMP operation. > m32r: convert to generic helpers for IPI function calls > commit 7b7426c8 In the above patch, a CALL_FUNC_SINGLE_IPI was newly introduced, but the its IPI vector number was wrong in the patch code. The m32r SMP kernel hanged-up during boot operation, because the CPU_BOOT_IPI was called instead of CALL_FUNC_SINGLE_IPI (CPU_BOOT_IPI had no side effect at that time because the 2nd core had already been started up), as a result, csd_unlock() was not called, then a dead lock occurred in csd_lock_wait() after the detection of Compact Flash memory as IDE generic disk. Signed-off-by: NToshihiro HANAWA <hanawa@ccs.tsukuba.ac.jp> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
In case CONFIG_DISCONTIGMEM is set, the memory size of system was always determined by CONFIG_MEMORY_SIZE and was not changeable. This patch fixes set_memory() of arch/m32r/mm/discontig.c so that we can specify memory size by the "mem=<size>" kernel parameter. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
Add a spinlock variable "rtc_lock". This is taken from arch/arm/kernel/time.c. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
Define ioread* and iowrite* macros to fix the following build errors: CC [M] drivers/uio/uio_smx.o drivers/uio/uio_smx.c: In function 'smx_handler': drivers/uio/uio_smx.c:31: error: implicit declaration of function 'ioread32' drivers/uio/uio_smx.c:37: error: implicit declaration of function 'iowrite32' Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
- Move EXPORT_SYMBOL lines of delay loop functions from arch/m32r/kernel/m32r_ksyms.c to arch/m32r/lib/delay.c. - Export __ndelay. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
Fix pmd_bad check code of tme_handler (TLB Miss Exception handler). The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Martin K. Petersen 提交于
Not all users of the topology information want to use libblkid. Provide the topology information through bdev ioctls. Also clarify sector size comments for existing BLK ioctls. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits) ALSA: usb - Use strlcat() correctly ALSA: Fix invalid __exit in sound/mips/*.c ALSA: hda - Fix / improve ALC66x parser ALSA: ctxfi: Swapped SURROUND-SIDE mute sound: Make keywest_driver static ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs ASoC: fix kconfig order of Blackfin drivers ALSA: hda - Added quirk to enable sound on Toshiba NB200 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2 ALSA: Don't assume i2c device probing always succeeds ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P ALSA: echoaudio - Re-enable the line-out control for the Mia card ALSA: hda - Resurrect input-source mixer of ALC268 model=acer ALSA: hda - Analog Devices AD1984A add HP Touchsmart model ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist ALSA: hda - CD-audio sound for hda-intel conexant benq laptop ASoC: DaVinci: Correct McASP FIFO initialization ASoC: Davinci: Fix race with cpu_dai->dma_data ASoC: DaVinci: Fix divide by zero error during 1st execution ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: [PATCH] ext4: retry failed direct IO allocations ext4: Fix build warning in ext4_dirty_inode() ext4: drop ext4dev compat ext4: fix a BUG_ON crash by checking that page has buffers attached to it
-
由 Jens Axboe 提交于
We should use the sysfs modified slice sync value, in case it differs from the default. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Don't think that's necessarily a perfect description of what this option fiddles with, but it's probably better than 'desktop'. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
- 03 10月, 2009 11 次提交
-
-
由 Jens Axboe 提交于
This slowly ramps up the async queue depth based on the time passed since the sync IO, and doesn't allow async at all until a sync slice period has passed. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Vivek Goyal 提交于
o Do not allow more than max_dispatch requests from an async queue, if some sync request has finished recently. This is in the hope that sync activity is still going on in the system and we might receive a sync request soon. Most likely from a sync queue which finished a request and we did not enable idling on it. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Eric Sandeen 提交于
On a 256M filesystem, doing this in a loop: xfs_io -F -f -d -c 'pwrite 0 64m' test rm -f test eventually leads to ENOSPC. (the xfs_io command does a 64m direct IO write to the file "test") As with other block allocation callers, it looks like we need to potentially retry the allocations on the initial ENOSPC. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Curt Wohlgemuth 提交于
This fixes the following warning: fs/ext4/inode.c: In function 'ext4_dirty_inode': fs/ext4/inode.c:5615: warning: unused variable 'current_handle' We remove the jbd_debug() statement which does use current_handle, as it's not terribly important in the grand scheme of things. Thanks to Stephen Rothwell for pointing this out. Signed-off-by: NCurt Wohlgemuth <curtw@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() ARM: 5740/1: fix valid_phys_addr_range() range check ARM: 5739/1: ARM: allow empty ATAG_CORE ARM: 5735/1: sa1111: CodingStyle cleanups ARM: 5738/1: Correct TCM documentation ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs ARM: 5733/1: fix bcmring compile error ARM: 5732/1: remove redundant include file ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 ARM: Ensure do_cache_op takes mmap_sem ARM: Fix __cpuexit section mismatch warnings ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast ARM: includecheck fix: mach-davinci, board-dm365-evm.c ARM: Remove unused CONFIG SA1100_H3XXX ARM: Fix warning: unused variable 'highmem' ARM: Fix warning: #warning syscall migrate_pages not implemented ARM: Fix SA11x0 clocksource warning ARM: Fix SA1100 Neponset serial section mismatch ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings ...
-
由 Kirill A. Shutemov 提交于
Currently, on ARMv6 and ARMv7, if an application tries to execute code (or garbage) on non-executable page it hangs. It caused by incorrect prefetch abort handling. Now every prefetch abort processes as a translation fault. To fix this we have to analyze instruction fault status register to figure out reason why we've got the abort and process it accordingly. To make IFSR different from DFSR we set bit 31 which is reserved in both IFSR and DFSR. This patch also tries to protect from future hangs on unexpected exceptions. An application will be killed if unexpected exception type was received. Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Kirill A. Shutemov 提交于
Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Greg Ungerer 提交于
Commit 1522ac3e ("Fix virtual to physical translation macro corner cases") breaks the end of memory check in valid_phys_addr_range(). The modified expression results in the apparent /dev/mem size being 2 bytes smaller than what it actually is. This patch reworks the expression to correctly check the address, while maintaining use of a valid address to __pa(). Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Brown 提交于
From: David Brown <davidb@quicinc.com> The ATAG_CORE is allowed to be empty. Although this is handled by parse_tag_core(), __vet_atags during startup rejects this tag unless it contains data. Allow the initial tag to be either the full size, or empty. Signed-off-by: NDavid Brown <davidb@quicinc.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hartley Sweeten 提交于
EXPORT_* macros should follow immediately after the closing function brace line. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop由 Russell King 提交于
Conflicts: MAINTAINERS
-