- 20 10月, 2009 1 次提交
-
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 16 10月, 2009 11 次提交
-
-
由 NeilBrown 提交于
async_syndrome_val check the P and Q blocks used for RAID6 calculations. With DDF raid6, some of the data blocks might be NULL, so this needs to be handled in the same way that async_gen_syndrome handles it. As async_syndrome_val calls async_xor, also enhance async_xor to detect and skip NULL blocks in the list. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
md/raid6 passes a list of 'struct page *' to the async_tx routines, which then either DMA map them for offload, or take the page_address for CPU based calculations. For RAID6 we sometime leave 'blanks' in the list of pages. For CPU based calcs, we want to treat theses as a page of zeros. For offloaded calculations, we simply don't pass a page to the hardware. Currently the 'blanks' are encoded as a pointer to raid6_empty_zero_page. This is a 4096 byte memory region, not a 'struct page'. This is mostly handled correctly but is rather ugly. So change the code to pass and expect a NULL pointer for the blanks. When taking page_address of a page, we need to check for a NULL and in that case use raid6_empty_zero_page. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
When a raid5 (or raid6) array is being reshaped to have fewer devices, conf->raid_disks is the latter and hence smaller number of devices. However sometimes we want to use a number which is the total number of currently required devices - the larger of the 'old' and 'new' sizes. Before we implemented reducing the number of devices, this was always 'new' i.e. ->raid_disks. Now we need max(raid_disks, previous_raid_disks) in those places. This particularly affects assembling an array that was shutdown while in the middle of a reshape to fewer devices. md.c needs a similar fix when interpreting the md metadata. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Dan Williams 提交于
The percpu conversion allowed a straightforward handoff of stripe processing to the async subsytem that initially showed some modest gains (+4%). However, this model is too simplistic and leads to stripes bouncing between raid5d and the async thread pool for every invocation of handle_stripe(). As reported by Holger this can fall into a pathological situation severely impacting throughput (6x performance loss). By downleveling the parallelism to raid_run_ops the pathological stripe_head bouncing is eliminated. This version still exhibits an average 11% throughput loss for: mdadm --create /dev/md0 /dev/sd[b-q] -n 16 -l 6 echo 1024 > /sys/block/md0/md/stripe_cache_size dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 ...but the results are at least stable and can be used as a base for further multicore experimentation. Reported-by: NHolger Kiehl <Holger.Kiehl@dwd.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Vladimir Dronnikov 提交于
drivers/md/unroll.pl replaced by awk script to drop build-time dependency on perl Signed-off-by: NVladimir Dronnikov <dronnikov@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
and replace with vfs_fsync which is much neater (but wasn't exported, or even in existence at the time the code was written). Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Both raid1 and raid10 create a mempool during startup. If the 'alloc' function for this mempool fails, unplug_slaves is called. If that happens when the pool is being initialised, unplug_slaves will try to use the 'conf' structure that isn't filled in yet, and badness will happen. So ensure that unplug_slaves doesn't get called unless we know that the conf structure if fully initialised. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Dan Williams 提交于
Deallocating a raid5_conf_t structure requires taking 'device_lock'. Ensure it is initialized before it is used, i.e. initialize the lock before attempting any further initializations that might fail. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
During 'check' of a raid1 or raid10 it is possible for the management thread to spend a lot of time running 'memcmp' on blocks from different devices, so make sure the thread has a chance to schedule. raid5d already has a cond_resched (in process_stripe). Reported-By: NLee Howard <faxguy@howardsilvan.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
This reverts commit df10cfbc. This patch was based on a misunderstanding and risks introducing a busy-wait loop. So revert it. Acked-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
- 25 9月, 2009 3 次提交
-
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'cputime' of git://git390.marist.edu/pub/scm/linux-2.6: [PATCH] Fix idle time field in /proc/uptime
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits) microblaze: Disable heartbeat/enable emaclite in defconfigs microblaze: Support simpleImage.dts make target microblaze: Fix _start symbol to physical address microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C microblaze: Actually show KiB rather than pages in "Freeing initrd memory:" microblaze: Support ptrace syscall tracing. microblaze: Updated CPU version and FPGA family codes in PVR microblaze: Generate correct signal and siginfo for integer div-by-zero microblaze: Don't be noisy when userspace causes hardware exceptions microblaze: Remove ipc.h file which points to non-existing asm-generic file microblaze: Clear sticky FSR register after generating exception signals microblaze: Ensure CPU usermode is set on new userspace processes microblaze: Use correct kbuild variable KBUILD_CFLAGS microblaze: Save and restore msr in hw exception microblaze: Add architectural support for USB EHCI host controllers microblaze: Implement include/asm/syscall.h. microblaze: Improve checking mechanism for MSR instruction microblaze: Add checking mechanism for MSR instruction ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: don't call percpu_modfree on NULL pointer. module: fix memory leak when load fails after srcversion/version allocated module: preferred way to use MODULE_AUTHOR param: allow whitespace as kernel parameter separator module: reduce string table for loaded modules (v2) module: reduce symbol table for loaded modules (v2)
-
- 24 9月, 2009 25 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (42 commits) Btrfs: hash the btree inode during fill_super Btrfs: relocate file extents in clusters Btrfs: don't rename file into dummy directory Btrfs: check size of inode backref before adding hardlink Btrfs: fix releasepage to avoid unlocking extents we haven't locked Btrfs: Fix test_range_bit for whole file extents Btrfs: fix errors handling cached state in set/clear_extent_bit Btrfs: fix early enospc during balancing Btrfs: deal with NULL space info Btrfs: account for space used by the super mirrors Btrfs: fix extent entry threshold calculation Btrfs: remove dead code Btrfs: fix bitmap size tracking Btrfs: don't keep retrying a block group if we fail to allocate a cluster Btrfs: make balance code choose more wisely when relocating Btrfs: fix arithmetic error in clone ioctl Btrfs: add snapshot/subvolume destroy ioctl Btrfs: change how subvolumes are organized Btrfs: do not reuse objectid of deleted snapshot/subvol Btrfs: speed up snapshot dropping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: truncate: use new helpers truncate: new helpers fs: fix overflow in sys_mount() for in-kernel calls fs: Make unload_nls() NULL pointer safe freeze_bdev: grab active reference to frozen superblocks freeze_bdev: kill bd_mount_sem exofs: remove BKL from super operations fs/romfs: correct error-handling code vfs: seq_file: add helpers for data filling vfs: remove redundant position check in do_sendfile vfs: change sb->s_maxbytes to a loff_t vfs: explicitly cast s_maxbytes in fiemap_check_ranges libfs: return error code on failed attr set seq_file: return a negative error code when seq_path_root() fails. vfs: optimize touch_time() too vfs: optimization for touch_atime() vfs: split generic_forget_inode() so that hugetlbfs does not have to copy it fs/inode.c: add dev-id and inode number for debugging in init_special_inode() libfs: make simple_read_from_buffer conventional
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: lsm: Use a compressed IPv6 string format in audit events Audit: send signal info if selinux is disabled Audit: rearrange audit_context to save 16 bytes per struct Audit: reorganize struct audit_watch to save 8 bytes
-
由 Rusty Russell 提交于
The general one handles NULL, the static obsolescent (CONFIG_HAVE_LEGACY_PER_CPU_AREA) one in module.c doesn't; Eric's commit 720eba31 assumed it did, and various frobbings since then kept that assumption. All other callers in module.c all protect it with an if; this effectively does the same as free_init is only goto if we fail percpu_modalloc(). Reported-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Américo Wang <xiyou.wangcong@gmail.com> Tested-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
-
由 Rusty Russell 提交于
Normally the twisty paths of sysfs will free the attributes, but not if we fail before we hook it into sysfs (which is the last thing we do in load_module). (This sysfs code is a turd, no doubt there are other issues lurking too). Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
-
由 Johannes Berg 提交于
For the longest time now we've been using multiple MODULE_AUTHOR() statements when a module has more than one author, but the comment here disagrees. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Peter Oberparleiter 提交于
Some boot mechanisms require that kernel parameters are stored in a separate file which is loaded to memory without further processing (e.g. the "Load from FTP" method on s390). When such a file contains newline characters, the kernel parameter preceding the newline might not be correctly parsed (due to the newline being stuck to the end of the actual parameter value) which can lead to boot failures. This patch improves kernel command line usability in such a situation by allowing generic whitespace characters as separators between kernel parameters. Signed-off-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jan Beulich 提交于
Also remove all parts of the string table (referenced by the symbol table) that are not needed for kallsyms use (i.e. which were only referenced by symbols discarded by the previous patch, or not referenced at all for whatever reason). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jan Beulich 提交于
Discard all symbols not interesting for kallsyms use: absolute, section, and in the common case (!KALLSYMS_ALL) data ones. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: (97 commits) md: raid-1/10: fix RW bits manipulation md: remove unnecessary memset from multipath. md: report device as congested when suspended md: Improve name of threads created by md_register_thread md: remove sparse warnings about lock context. md: remove sparse waring "symbol xxx shadows an earlier one" async_tx/raid6: add missing dma_unmap calls to the async fail case ioat3: fix uninitialized var warnings drivers/dma/ioat/dma_v2.c: fix warnings raid6test: fix stack overflow ioat2: clarify ring size limits md/raid6: cleanup ops_run_compute6_2 md/raid6: eliminate BUG_ON with side effect dca: module load should not be an error message ioat: driver version 4.0 dca: registering requesters in multiple dca domains async_tx: remove HIGHMEM64G restriction dmaengine: sh: Add Support SuperH DMA Engine driver dmaengine: Move all map_sg/unmap_sg for slave channel to its client fsldma: Add DMA_SLAVE support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (13039): dib0700: not building CONFIG_DVB_TUNER_DIB0070 breaks compilation V4L/DVB (13038): dvbdev: Remove an anoying/uneeded warning V4L/DVB (13037): go7007: Revert compatibility code added at the wrong place media: video: Fix build in saa7164
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6由 Linus Torvalds 提交于
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits) HWPOISON: Enable error_remove_page on btrfs HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs HWPOISON: Add madvise() based injector for hardware poisoned pages v4 HWPOISON: Enable error_remove_page for NFS HWPOISON: Enable .remove_error_page for migration aware file systems HWPOISON: The high level memory error handler in the VM v7 HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process HWPOISON: shmem: call set_page_dirty() with locked page HWPOISON: Define a new error_remove_page address space op for async truncation HWPOISON: Add invalidate_inode_page HWPOISON: Refactor truncate to allow direct truncating of page v2 HWPOISON: check and isolate corrupted free pages v2 HWPOISON: Handle hardware poisoned pages in try_to_unmap HWPOISON: Use bitmask/action code for try_to_unmap behaviour HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2 HWPOISON: Add poison check to page fault handling HWPOISON: Add basic support for poisoned pages in fault handler v3 HWPOISON: Add new SIGBUS error codes for hardware poison signals HWPOISON: Add support for poison swap entries v2 HWPOISON: Export some rmap vma locking to outside world ...
-
由 Andrew Morton 提交于
drivers/usb/serial/sierra.c: In function 'sierra_suspend': drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm' Repairs commit e6929a90 Author: Oliver Neukum <oliver@neukum.org> Date: Fri Sep 4 23:19:53 2009 +0200 USB: support for autosuspend in sierra while online Cc: Greg KH <greg@kroah.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
This brings Alpha AGP platforms in sync with the change to struct agp_memory (unsigned long *memory => struct page **pages). Only compile tested (I don't have titan/marvel hardware), but this change looks pretty straightforward, so hopefully it's ok. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Dave Airlie <airlied@linux.ie> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hiroshi Shimamoto 提交于
Because the binfmt is not different between threads in the same process, it can be moved from task_struct to mm_struct. And binfmt moudle is handled per mm_struct instead of task_struct. Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Albin Tonnerre 提交于
When unaligned accesses are required for uncompressing a kernel (such as for LZO decompression on ARM in a patch that follows), including <linux/kernel.h> causes issues as it brings in a lot of things that are not available in the decompression environment. linux/kernel.h brings at least: extern int console_printk[]; extern const char hex_asc[]; which causes errors at link-time as they are not available when compiling the pre-boot environement. There are also a few others: arch/arm/boot/compressed/misc.o: In function `valid_user_regs': arch/arm/include/asm/ptrace.h:158: undefined reference to `elf_hwcap' arch/arm/boot/compressed/misc.o: In function `console_silent': include/linux/kernel.h:292: undefined reference to `console_printk' arch/arm/boot/compressed/misc.o: In function `console_verbose': include/linux/kernel.h:297: undefined reference to `console_printk' arch/arm/boot/compressed/misc.o: In function `pack_hex_byte': include/linux/kernel.h:360: undefined reference to `hex_asc' arch/arm/boot/compressed/misc.o: In function `hweight_long': include/linux/bitops.h:45: undefined reference to `hweight32' arch/arm/boot/compressed/misc.o: In function `__cmpxchg_local_generic': include/asm-generic/cmpxchg-local.h:21: undefined reference to `wrong_size_cmpxchg' include/asm-generic/cmpxchg-local.h:42: undefined reference to `wrong_size_cmpxchg' arch/arm/boot/compressed/misc.o: In function `__xchg': arch/arm/include/asm/system.h:309: undefined reference to `__bad_xchg' However, those files apparently use nothing from <linux/kernel.h>, all they need is the declaration of types such as u32 or u64, so <linux/types.h> should be enough Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Phillip Lougher 提交于
If the lzma/gzip decompressors are called with insufficient input data (len > 0 & fill = NULL), they will attempt to call the fill function to obtain more data, leading to a kernel oops. Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
In this case, the calls to request_mem_region, ioremap, and release_mem_region all have a consistent length argument, len, but since in other files (res->end - res->start) + 1, equivalent to resource_size(res), is used for a resource-typed structure res, one could consider whether the same should be done here. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
romfs_iget returns an ERR_PTR value in an error case instead of NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = romfs_iget(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
The allocation may fail. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
id_reg.if_mode might be unitialized when (*mrq)->error is nonzero. move dev_dbg() inside the if so that we are sure we can use id_reg values. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
unsigned block cannot be less than 0. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Dangaard Brouer 提交于
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c and edac_pci.c. They all use a wait_for_completion() scheme, but this scheme it not 100% safe on multiple CPUs. See the _rcu_barrier() implementation which explains why extra precausion is needed. The patch adds a comment about rcu_barrier() and as a precausion calls rcu_barrier(). A maintainer needs to look at removing the wait_for_completion code. [dougthompson@xmission.com: remove the wait_for_completion code] Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-