The module owner = THIS_MODULE is set by I2C core, drop duplicate assignment.

Fixes: 8dde6f74 ("drm: bridge: icn6211: Add I2C configuration support")
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401113317.7033-1-marex@denx.de

Instead of exiting the loop as expected when an entry is found, the
list_for_each_entry() continues until the traversal is complete.
when found the entry, add a break after the switch statement.
Signed-off-by: NXiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401115018.9335-1-xiam0nd.tong@gmail.com

Fix copy-paste error, module exit function should be marked with __exit
instead of __init.

Fixes: 8dde6f74 ("drm: bridge: icn6211: Add I2C configuration support")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406014250.902187-1-marex@denx.deReviewed-by: NRobert Foss <robert.foss@linaro.org>

The datasheet for this bridge is not available, the PLL behavior has been
inferred from [1] and [2] and by analyzing the DPI pixel clock with scope.
After further testing with other displays and different DSI data lane count,
it turns out the P-factor is not 1/2^N divider, but rather only 1/N divider.
It also turns out the input into the PLL seem to be ByteClock instead of DSI
HS clock.

Rework the P-factor calculation such that the PLL calculation code handles
P-factor from 1..32 with P-factors above 16 must be even. In case P-factor
is even, enable built-in 1:2 divider and program P-factor/2 to PLL_REF_DIV,
otherwise configure only the P-factor into PLL_REF_DIV register.

Switch the PLL factor calculation from kHz to Hz to maintain precision.

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator

Fixes: f30cf0ec ("drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration")
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Acked-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220402004118.897014-1-marex@denx.de

Following the introduction of bridge_atomic_enable in the ingenic
drm driver, the crtc is enabled between .prepare and .enable, if
it exists. Add it so the backlight is only enabled after the crtc is, to
avoid graphical issues.

As we're moving the "sleep out" command out of the init sequence
into .enable for the ABT, we need to switch the regmap cache
to REGCACHE_FLAT to be able to use regmap_set_bits, given this
panel registers are write-ony and read as 0.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
[pcercuei: Remove empty line after opening brace]
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-4-cbranchereau@gmail.com

This driver supports the NewVision NV3052C based LCDs. Right now, it
only supports the LeadTek LTK035C5444T 2.4" 640x480 TFT LCD panel, which
can be found in the Anbernic RG-350M handheld console.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
[pcercuei: Change msleep(5) to usleep_range(5000, 20000)]
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-3-cbranchereau@gmail.com

ingenic_drm_bridge_atomic_enable allows the CRTC to be enabled after
panels have slept out, and before their display is turned on, solving
a graphical bug on the newvision nv3502c.

Also add ingenic_drm_bridge_atomic_disable to balance it out.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Acked-by: NArtur Rojek <contact@artur-rojek.eu>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-2-cbranchereau@gmail.com

Use dma_resv_get_singleton() here to eventually get more than one write
fence as single fence.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Lyude Paul <lyude@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-14-christian.koenig@amd.com

Let's start the 5.19 development cycle.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>

Drivers should never touch this directly.

v2: fix rebase clash
Signed-off-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-10-christian.koenig@amd.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead use the new dma_resv_get_singleton function.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-6-christian.koenig@amd.com

The bug is here:
	if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp))
		return cstate;

The list iterator value 'cstate' will *always* be set and non-NULL
by list_for_each_entry_from_reverse(), so it is incorrect to assume
that the iterator value will be unchanged if the list is empty or no
element is found (In fact, it will be a bogus pointer to an invalid
structure object containing the HEAD). Also it missed a NULL check
at callsite and may lead to invalid memory access after that.

To fix this bug, just return 'encoder' when found, otherwise return
NULL. And add the NULL check.

Cc: stable@vger.kernel.org
Fixes: 1f7f3d91 ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog")
Signed-off-by: NXiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327075824.11806-1-xiam0nd.tong@gmail.com

It looks like the incorrect name of a function parameter was used
in the kernel-doc notation, so just change it to the function's
parameter name to quell the kernel-doc warning.

drivers/gpu/drm/drm_format_helper.c:640: warning: Function parameter or member 'vaddr' not described in 'drm_fb_xrgb8888_to_mono_reversed'
drivers/gpu/drm/drm_format_helper.c:640: warning: Excess function parameter 'src' description in 'drm_fb_xrgb8888_to_mono_reversed'

Fixes: bcf8b616 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
CC: Maxime Ripard <mripard@kernel.org>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NSimon Ser <contact@emersion.fr>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Signed-off-by: NSimon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/480560/

Fix a build warning from 'make htmldocs' by correcting the lock name
in the kernel-doc comment.

include/drm/drm_file.h:369: warning: Function parameter or member 'master_lookup_lock' not described in 'drm_file'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NSimon Ser <contact@emersion.fr>
Signed-off-by: NSimon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220403231040.18540-1-rdunlap@infradead.org

You really need to hold the reservation here or all kinds of funny
things can happen between grabbing the dependencies and inserting the
new fences.

v2: Fix commit summary (Christian)
Acked-by: NMelissa Wen <mwen@igalia.com>
Reviewed-by: N"Christian König" <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331204651.2699107-4-daniel.vetter@ffwll.ch

Integrated into the scheduler now and all users converted over.

v2: Rebased over changes from König.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220331204651.2699107-3-daniel.vetter@ffwll.ch

We need to pull the drm_sched_job_init much earlier, but that's very
minor surgery.

v2: Actually fix up cleanup paths by calling drm_sched_job_init, which
I wanted to to in the previous round (and did, for all other drivers).
Spotted by Lucas.

v3: Rebase over renamed functions to add dependencies.

v4: Rebase over patches from Christian.

v5: More rebasing over work from Christian.
Acked-by: NLucas Stach <l.stach@pengutronix.de>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: etnaviv@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220331204651.2699107-2-daniel.vetter@ffwll.ch

Since this driver has been changed to use the resource managed
devm_drm_of_get_bridge() to get bridge from ->attach(), it's
unnecessary to call drm_of_panel_bridge_remove() to remove the
bridge from ->detach().  So, let's drop the drm_of_panel_bridge_remove()
function call.  As nwl_dsi_bridge_detach() only calls
drm_of_panel_bridge_remove(), it can also be dropped.

Cc: Robert Foss <robert.foss@linaro.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: NLiu Ying <victor.liu@nxp.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401015828.2959505-1-victor.liu@nxp.com

This driver has been changed to use the resource managed
devm_drm_of_get_bridge() to get bridge from ->bind(), it's
unnecessary to call drm_of_panel_bridge_remove() to remove the
bridge from ->unbind() as devm_drm_of_get_bridge()
is automatically remove the bridge when @dev is unbound.

Drop it the drm_bridge_remove().

Cc: Linus Walleij <linus.walleij@linaro.org>
Reported-by: NMaxime Ripard <maxime@cerno.tech>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401150533.7777-1-jagan@amarulasolutions.com

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"

Makes the code a bit more simpler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-15-christian.koenig@amd.com

Use dma_resv_get_singleton() here to eventually get more than one write
fence as single fence.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-13-christian.koenig@amd.com

Pull more dma-mapping updates from Christoph Hellwig:

 - fix a regression in dma remap handling vs AMD memory encryption (me)

 - finally kill off the legacy PCI DMA API (Christophe JAILLET)

* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move pgprot_decrypted out of dma_pgprot
  PCI/doc: cleanup references to the legacy PCI DMA API
  PCI: Remove the deprecated "pci-dma-compat.h" API

Pull ARM fixes from Russell King:

 - avoid unnecessary rebuilds for library objects

 - fix return value of __setup handlers

 - fix invalid input check for "crashkernel=" kernel option

 - silence KASAN warnings in unwind_frame

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
  ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
  ARM: 9187/1: JIVE: fix return value of __setup handler
  ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects

Get the write fence using dma_resv_for_each_fence instead of accessing
it manually.

v2: add TODO comment
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-9-christian.koenig@amd.com

Instead use the new dma_resv_get_singleton function.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-8-christian.koenig@amd.com

Instead use the new dma_resv_get_singleton function.

v2: drop the TODO comment.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NZack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-7-christian.koenig@amd.com

Add a function to simplify getting a single fence for all the fences in
the dma_resv object.

v2: fix ref leak in error handling
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-3-christian.koenig@amd.com

Signed-off-by: NSui Jingfeng <15330273260@189.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20220402134413.1705246-1-15330273260@189.cnReviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

This reverts commit 7dabfa2b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reported-by: NTony Lindgren <tony@atomide.com>
Reported-by: NAlexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org

Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Avoid SEGV if core.cpus isn't set in 'perf stat'.

 - Stop depending on .git files for building PERF-VERSION-FILE, used in
   'perf --version', fixing some perf tools build scenarios.

 - Convert tracepoint.py example to python3.

 - Update UAPI header copies from the kernel sources: socket,
   mman-common, msr-index, KVM, i915 and cpufeatures.

 - Update copy of libbpf's hashmap.c.

 - Directly return instead of using local ret variable in
   evlist__create_syswide_maps(), found by coccinelle.

* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf python: Convert tracepoint.py example to python3
  perf evlist: Directly return instead of using local ret variable
  perf cpumap: More cpu map reuse by merge.
  perf cpumap: Add is_subset function
  perf evlist: Rename cpus to user_requested_cpus
  perf tools: Stop depending on .git files for building PERF-VERSION-FILE
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf tools: Update copy of libbpf's hashmap.c
  perf stat: Avoid SEGV if core.cpus isn't set

Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix empty $(PYTHON) expansion.

 - Fix UML, which got broken by the attempt to suppress Clang warnings.

 - Fix warning message in modpost.

* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: restore the warning message for missing symbol versions
  Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
  kbuild: Remove '-mno-global-merge'
  kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
  kconfig: remove stale comment about removed kconfig_print_symbol()

Pull MIPS fixes from Thomas Bogendoerfer:

 - build fix for gpio

 - fix crc32 build problems

 - check for failed memory allocations

* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: crypto: Fix CRC32 code
  MIPS: rb532: move GPIOD definition into C-files
  MIPS: lantiq: check the return value of kzalloc()
  mips: sgi-ip22: add a check for the return of kzalloc()

Pull kvm fixes from Paolo Bonzini:

 - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

 - Documentation improvements

 - Prevent module exit until all VMs are freed

 - PMU Virtualization fixes

 - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences

 - Other miscellaneous bugfixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: fix sending PV IPI
  KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
  KVM: x86: Remove redundant vm_entry_controls_clearbit() call
  KVM: x86: cleanup enter_rmode()
  KVM: x86: SVM: fix tsc scaling when the host doesn't support it
  kvm: x86: SVM: remove unused defines
  KVM: x86: SVM: move tsc ratio definitions to svm.h
  KVM: x86: SVM: fix avic spec based definitions again
  KVM: MIPS: remove reference to trap&emulate virtualization
  KVM: x86: document limitations of MSR filtering
  KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
  KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
  KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
  KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
  KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
  KVM: x86: Trace all APICv inhibit changes and capture overall status
  KVM: x86: Add wrappers for setting/clearing APICv inhibits
  KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
  KVM: X86: Handle implicit supervisor access with SMAP
  KVM: X86: Rename variable smap to not_smap in permission_fault()
  ...

This log message was accidentally chopped off.

I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].

I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.

[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/

Fixes: 4a679593 ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Acked-by: NMark Brown <broonie@kernel.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>

Pull block driver fix from Jens Axboe:
 "Got two reports on nbd spewing warnings on load now, which is a
  regression from a commit that went into your tree yesterday.

  Revert the problematic change for now"

* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
  Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"