- 02 11月, 2011 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
- 01 11月, 2011 3 次提交
-
-
由 Andy Shevchenko 提交于
There is no functional change. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christopher Yeoh 提交于
The basic idea behind cross memory attach is to allow MPI programs doing intra-node communication to do a single copy of the message rather than a double copy of the message via shared memory. The following patch attempts to achieve this by allowing a destination process, given an address and size from a source process, to copy memory directly from the source process into its own address space via a system call. There is also a symmetrical ability to copy from the current process's address space into a destination process's address space. - Use of /proc/pid/mem has been considered, but there are issues with using it: - Does not allow for specifying iovecs for both src and dest, assuming preadv or pwritev was implemented either the area read from or written to would need to be contiguous. - Currently mem_read allows only processes who are currently ptrace'ing the target and are still able to ptrace the target to read from the target. This check could possibly be moved to the open call, but its not clear exactly what race this restriction is stopping (reason appears to have been lost) - Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix domain socket is a bit ugly from a userspace point of view, especially when you may have hundreds if not (eventually) thousands of processes that all need to do this with each other - Doesn't allow for some future use of the interface we would like to consider adding in the future (see below) - Interestingly reading from /proc/pid/mem currently actually involves two copies! (But this could be fixed pretty easily) As mentioned previously use of vmsplice instead was considered, but has problems. Since you need the reader and writer working co-operatively if the pipe is not drained then you block. Which requires some wrapping to do non blocking on the send side or polling on the receive. In all to all communication it requires ordering otherwise you can deadlock. And in the example of many MPI tasks writing to one MPI task vmsplice serialises the copying. There are some cases of MPI collectives where even a single copy interface does not get us the performance gain we could. For example in an MPI_Reduce rather than copy the data from the source we would like to instead use it directly in a mathops (say the reduce is doing a sum) as this would save us doing a copy. We don't need to keep a copy of the data from the source. I haven't implemented this, but I think this interface could in the future do all this through the use of the flags - eg could specify the math operation and type and the kernel rather than just copying the data would apply the specified operation between the source and destination and store it in the destination. Although we don't have a "second user" of the interface (though I've had some nibbles from people who may be interested in using it for intra process messaging which is not MPI). This interface is something which hardware vendors are already doing for their custom drivers to implement fast local communication. And so in addition to this being useful for OpenMPI it would mean the driver maintainers don't have to fix things up when the mm changes. There was some discussion about how much faster a true zero copy would go. Here's a link back to the email with some testing I did on that: http://marc.info/?l=linux-mm&m=130105930902915&w=2 There is a basic man page for the proposed interface here: http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt This has been implemented for x86 and powerpc, other architecture should mainly (I think) just need to add syscall numbers for the process_vm_readv and process_vm_writev. There are 32 bit compatibility versions for 64-bit kernels. For arch maintainers there are some simple tests to be able to quickly verify that the syscalls are working correctly here: http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgzSigned-off-by: NChris Yeoh <yeohc@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <linux-man@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
The pervasive, but implicit presence of <linux/module.h> meant that things like this file would happily compile as-is. But with the desire to phase out the module.h being included everywhere, point this file at export.h which will give it THIS_MODULE and the EXPORT_SYMBOL variants. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 29 10月, 2011 1 次提交
-
-
由 Tetsuo Handa 提交于
Commit 17fcfbd9 "TOMOYO: Add interactive enforcing mode." introduced ability to query access decision using userspace programs. It was using global PID for reaching policy configuration of the process. However, use of PID returns stale policy configuration when the process's subjective credentials and objective credentials differ. Fix this problem by allowing reaching policy configuration via query id. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 23 10月, 2011 1 次提交
-
-
由 Tetsuo Handa 提交于
Commit f23571e8 "TOMOYO: Copy directly to userspace buffer." introduced tomoyo_flush() that flushes data to be read as soon as possible. tomoyo_select_domain() (which is called by write()) enqueues data which meant to be read by next read(), but previous read()'s read buffer's size was not cleared. As a result, since 2.6.36, sequence like char *cp = "select global-pid=1\n"; read(fd, buf1, sizeof(buf1)); write(fd, cp, strlen(cp)); read(fd, buf2, sizeof(buf2)); causes enqueued data to be flushed to buf1 rather than buf2. Fix this bug by clearing read buffer's size upon write() request. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 21 10月, 2011 1 次提交
-
-
由 Jarkko Sakkinen 提交于
Allow query access as a normal user removing the need for CAP_MAC_ADMIN. Give RW access to /smack/access for UGO. Do not import smack labels in access check. Signed-off-by: NJarkko Sakkinen <jarkko.j.sakkinen@gmail.com> Signed-off-by: NCasey Schaufler <cschaufler@cschaufler-intel.(none)>
-
- 19 10月, 2011 3 次提交
-
-
由 Tetsuo Handa 提交于
CONFIG_SECURITY_TOMOYO_MAX_{ACCEPT_ENTRY,AUDIT_LOG} introduced by commit 0e4ae0e0 "TOMOYO: Make several options configurable." were by error not used. Reported-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Paul Moore 提交于
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: NJames M. Cape <jcape@ignore-your.tv> Signed-off-by: NPaul Moore <pmoore@redhat.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarkko Sakkinen 提交于
Forgot to update simple_transaction_set() to take terminator character into account. Signed-off-by: NJarkko Sakkinen <jarkko.j.sakkinen@gmail.com> Signed-off-by: NCasey Schaufler <cschaufler@cschaufler-intel.(none)>
-
- 14 10月, 2011 1 次提交
-
-
由 Jarkko Sakkinen 提交于
On some build configurations PER_CLEAR_ON_SETID symbol was not found when compiling smack_lsm.c. This patch fixes the issue by explicitly doing #include <linux/personality.h>. Signed-off-by: NJarkko Sakkinen <jarkko.j.sakkinen@gmail.com> Signed-off-by: NCasey Schaufler <cschaufler@cschaufler-intel.(none)>
-
- 13 10月, 2011 7 次提交
-
-
由 Jarkko Sakkinen 提交于
Small fix for the output of access SmackFS file. Use string is instead of byte. Makes it easier to extend API if it is needed. Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@intel.com>
-
由 Jarkko Sakkinen 提交于
Protections for domain transition: - BPRM unsafe flags - Secureexec - Clear unsafe personality bits. - Clear parent death signal Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@intel.com>
-
由 Casey Schaufler 提交于
This patch is targeted for the smack-next tree. This patch takes advantage of the recent changes for performance and points the packet labels on UDS connect at the output label of the far side. This makes getsockopt(...SO_PEERCRED...) function properly. Without this change the getsockopt does not provide any information. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
-
由 Casey Schaufler 提交于
There are a number of comments in the Smack code that are either malformed or include code. This patch cleans them up. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
-
由 Casey Schaufler 提交于
Al Viro pointed out that the processing of fcntl done by Smack appeared poorly designed. He was right. There are three things that required change. Most obviously, the list of commands that really imply writing is limited to those involving file locking and signal handling. The initialization if the file security blob was incomplete, requiring use of a heretofore unused LSM hook. Finally, the audit information coming from a helper masked the identity of the LSM hook. This patch corrects all three of these defects. This is targeted for the smack-next tree pending comments. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
-
由 Casey Schaufler 提交于
This patch is targeted for the smack-next tree. Smack access checks suffer from two significant performance issues. In cases where there are large numbers of rules the search of the single list of rules is wasteful. Comparing the string values of the smack labels is less efficient than a numeric comparison would. These changes take advantage of the Smack label list, which maintains the mapping of Smack labels to secids and optional CIPSO labels. Because the labels are kept perpetually, an access check can be done strictly based on the address of the label in the list without ever looking at the label itself. Rather than keeping one global list of rules the rules with a particular subject label can be based off of that label list entry. The access check need never look at entries that do not use the current subject label. This requires that packets coming off the network with CIPSO direct Smack labels that have never been seen before be treated carefully. The only case where they could be delivered is where the receiving socket has an IPIN star label, so that case is explicitly addressed. On a system with 39,800 rules (200 labels in all permutations) a system with this patch runs an access speed test in 5% of the time of the old version. That should be a best case improvement. If all of the rules are associated with the same subject label and all of the accesses are for processes with that label (unlikely) the improvement is about 30%. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
-
由 Jarkko Sakkinen 提交于
Adds a new file into SmackFS called 'access'. Wanted Smack permission is written into /smack/access. After that result can be read from the opened file. If access applies result contains 1 and otherwise 0. File access is protected from race conditions by using simple_transaction_get()/set() API. Fixes from the previous version: - Removed smack.h changes, refactoring left-over from previous version. - Removed #include <linux/smack.h>, refactoring left-over from previous version. Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: NCasey Schaufler <cschaufler@cschaufler-intel.(none)>
-
- 12 10月, 2011 2 次提交
-
-
由 Tetsuo Handa 提交于
Commit 059d84db "TOMOYO: Add socket operation restriction support" and commit 731d37aa "TOMOYO: Allow domain transition without execve()." forgot to update tomoyo_domain_quota_is_ok() and tomoyo_del_acl() which results in incorrect quota counting and memory leak. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Tetsuo Handa 提交于
rcu_read_lock() is sufficient for calling find_task_by_pid_ns()/find_task_by_vpid(). Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 28 9月, 2011 1 次提交
-
-
由 Tetsuo Handa 提交于
Commit bd03a3e4 "TOMOYO: Add policy namespace support." introduced policy namespace. But as of /sbin/modprobe is executed from initramfs/initrd, profiles for target domain's namespace is not defined because /sbin/tomoyo-init is not yet called. Reported-by: NJamie Nguyen <jamie@tomoyolinux.co.uk> Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 26 9月, 2011 3 次提交
-
-
由 Tetsuo Handa 提交于
tomoyo_policy_lock mutex already protects it. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Tetsuo Handa 提交于
When TOMOYO started using garbage collector at commit 847b173e "TOMOYO: Add garbage collector.", we waited for close() before kfree(). Thus, elements to be kfree()d were queued up using tomoyo_gc_list list. But it turned out that tomoyo_element_linked_by_gc() tends to choke garbage collector when certain pattern of entries are queued. Since garbage collector is no longer waiting for close() since commit 2e503bbb "TOMOYO: Fix lockdep warning.", we can remove tomoyo_gc_list list and tomoyo_element_linked_by_gc() by doing sequential processing. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Tetsuo Handa 提交于
Commit efe836ab "TOMOYO: Add built-in policy support." introduced tomoyo_load_builtin_policy() but was by error called from nowhere. Commit b22b8b9f "TOMOYO: Rename meminfo to stat and show more statistics." introduced tomoyo_update_stat() but was by error not called from tomoyo_assign_domain(). Also, mark tomoyo_io_printf() and tomoyo_path_permission() static functions, as reported by "make namespacecheck". Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 21 9月, 2011 2 次提交
-
-
由 Mimi Zohar 提交于
For each hex2bin call in encrypted keys, check that the ascii hex string is valid. On failure, return -EINVAL. Changelog v1: - hex2bin now returns an int Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
-
由 Mimi Zohar 提交于
For each hex2bin call in trusted keys, check that the ascii hex string is valid. On failure, return -EINVAL. Changelog v1: - hex2bin now returns an int Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
-
- 19 9月, 2011 1 次提交
-
-
由 Tetsuo Handa 提交于
I got an opinion that it is difficult to use exception policy's domain transition control directives because they need to match the pathname specified to "file execute" directives. For example, if "file execute /bin/\*\-ls\-cat" is given, corresponding domain transition control directive needs to be like "no_keep_domain /bin/\*\-ls\-cat from any". If we can specify like below, it will become more convenient. file execute /bin/ls keep exec.realpath="/bin/ls" exec.argv[0]="ls" file execute /bin/cat keep exec.realpath="/bin/cat" exec.argv[0]="cat" file execute /bin/\*\-ls\-cat child file execute /usr/sbin/httpd <apache> exec.realpath="/usr/sbin/httpd" exec.argv[0]="/usr/sbin/httpd" In above examples, "keep" works as if keep_domain is specified, "child" works as if "no_reset_domain" and "no_initialize_domain" and "no_keep_domain" are specified, "<apache>" causes domain transition to <apache> domain upon successful execve() operation. Moreover, we can also allow transition to different domains based on conditions like below example. <kernel> /usr/sbin/sshd file execute /bin/bash <kernel> /usr/sbin/sshd //batch-session exec.argc=2 exec.argv[1]="-c" file execute /bin/bash <kernel> /usr/sbin/sshd //root-session task.uid=0 file execute /bin/bash <kernel> /usr/sbin/sshd //nonroot-session task.uid!=0 Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 16 9月, 2011 1 次提交
-
-
由 Stephen Rothwell 提交于
Fixes this build error: security/keys/encrypted-keys/masterkey_trusted.c: In function 'request_trusted_key': security/keys/encrypted-keys/masterkey_trusted.c:35:2: error: implicit declaration of function 'IS_ERR' Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
- 15 9月, 2011 9 次提交
-
-
由 Tetsuo Handa 提交于
Tell userland tools that this is TOMOYO 2.5. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Dmitry Kasatkin 提交于
When allocating from slab, initialization is done the first time in init_once() and subsequently on free. Because evm_status was not re-initialized on free, evm_verify_hmac() skipped verifications. This patch re-initializes evm_status. Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
Before permitting 'security.evm' to be updated, 'security.evm' must exist and be valid. In the case that there are no existing EVM protected xattrs, it is safe for posix acls to update the mode bits. To differentiate between no 'security.evm' xattr and no xattrs used to calculate 'security.evm', this patch defines INTEGRITY_NOXATTR. Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
The posix xattr acls are 'system' prefixed, which normally would not affect security.evm. An interesting side affect of writing posix xattr acls is their modifying of the i_mode, which is included in security.evm. This patch updates security.evm when posix xattr acls are written. Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
evm_protect_xattr unnecessarily validates the current security.evm integrity, before updating non-evm protected extended attributes and other file metadata. This patch limits validating the current security.evm integrity to evm protected metadata. Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
security_inode_init_security previously returned -EOPNOTSUPP, for S_PRIVATE inodes, and relied on the callers to change it to 0. As the callers do not change the return code anymore, return 0, intead of -EOPNOTSUPP. Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
All tristates selected by EVM(boolean) are forced to be builtin, except in the TCG_TPM(tristate) dependency case. Arnaud Lacombe summarizes the Kconfig bug as, "So it would seem direct dependency state influence the state of reverse dependencies.." For a detailed explanation, refer to Arnaud Lacombe's posting http://lkml.org/lkml/2011/8/23/498. With the "encrypted-keys: remove trusted-keys dependency" patch, EVM can now be built without a dependency on TCG_TPM. The trusted-keys dependency requires trusted-keys to either be builtin or not selected. This dependency will prevent the boolean/tristate mismatch from occuring. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>, Randy Dunlap <rdunlap@xenotimenet> Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
Encrypted keys are decrypted/encrypted using either a trusted-key or, for those systems without a TPM, a user-defined key. This patch removes the trusted-keys and TCG_TPM dependencies. Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
由 Mimi Zohar 提交于
Move all files associated with encrypted keys to keys/encrypted-keys. Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
-
- 14 9月, 2011 3 次提交
-
-
由 Tetsuo Handa 提交于
There was a race window that the pathname which is subjected to "file execute" permission check when retrying via supervisor's decision because the pathname was recalculated upon retry. Though, there is an inevitable race window even without supervisor, for we have to calculate the symbolic link's pathname from "struct linux_binprm"->filename rather than from "struct linux_binprm"->file because we cannot back calculate the symbolic link's pathname from the dereferenced pathname. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Tetsuo Handa 提交于
To be able to split permissions for Apache's CGI programs which are executed without execve(), add special domain transition which is performed by writing a TOMOYO's domainname to /sys/kernel/security/tomoyo/self_domain interface. This is an API for TOMOYO-aware userland applications. However, since I expect TOMOYO and other LSM modules to run in parallel, this patch does not use /proc/self/attr/ interface in order to avoid conflicts with other LSM modules when it became possible to run multiple LSM modules in parallel. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Tetsuo Handa 提交于
Add per-entry flag which controls generation of grant logs because Xen and KVM issues ioctl requests so frequently. For example, file ioctl /dev/null 0x5401 grant_log=no will suppress /sys/kernel/security/tomoyo/audit even if preference says grant_log=yes . Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-