- 28 2月, 2009 19 次提交
-
-
由 Bob Copeland 提交于
ath9k_regd_get_current_country() doesn't exist. Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
The function ath9k_regd_get_rd() is unused. Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
Write isWwrSKU as an inline function and nix the camel-case to make the routine slightly clearer. Change its argument to take the regd value directly so it can eventually be used by ath5k as well. Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
Since we already have a stack variable to track the eeprom regd, we can grab it up front it and save three calls to fetch it again. Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
The current_rd_inuse regulatory value is assigned but not used anywhere. Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
This avoids triggering a BUG_ON in pci_disable_msi in the error path. Furthermore remove the first call to pci_disable_device as it is already called at out_pci_disable_device. Both issues were introduced in the patch "iwlagn: fix hw-rfkill while the interface is down". Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Senthil Balasubramanian 提交于
This patch adds Open Loop Control support for Atheros chipsets that supports open loop power control. Signed-off-by: NSenthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
The existing value was too conservative, causing the history buffer not to be updated. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
This patch fixes a bug in ANI, where the MIB counters were being cleared before the stats were updated. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
This patch lays the groundwork for handling TSF Out of Range interrupt, which will be used for power save later on. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
This patch enables Fractional N mode for all channel if the EEPROM says so, and also fixes the INI only when the device is not a 2 GHz only capable device. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
AR9285 chipsets have a different EEPROM layout, handle this appropriately when populating the rd_ext capability. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
This patch fixes a bug where the max power level was being calculated incorrectly. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Only ipw2x00 now uses it. Reduce confusion. Profit! Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
So that net/ieee80211.h can be made private to ipw2x00 in a follow-up. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
Test arraysize before an element of the array. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
The problem: "iwconfig ethX power on" returns error The cause: "ps_supported" flag was never set for SD8385/8686 The fix: check firmware capabilities returned by GET_HW_SPEC command. Set "ps_supported" to 1 if FW_CAPINFO_PS bit is on. This fix applies to SDIO interface only. Signed-off-by: NBing Zhao <bzhao@marvell.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 2月, 2009 3 次提交
-
-
由 Larry Finger 提交于
Add new USB ID codes. These come from two postings on forums and mailing lists, and four are derived from the .inf that accompanies the latest Realtek Windows driver for the RTL8187L. Thanks to Viktor Ilijašić <viktor.ilijasic@gmail.com> and Xose Vazquez Perez <xose.vazquez@gmail.com> for reporting these new ID's. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
[246916.338046] [246916.338048] Pid: 29265, comm: insmod Not tainted (2.6.29-rc4-wl #64) 9461DUU [246916.338051] EIP: 0060:[<c02ca274>] EFLAGS: 00010202 CPU: 0 [246916.338055] EIP is at rollback_registered+0x24/0x220 [246916.338057] EAX: 00000001 EBX: 00000000 ECX: 00000000 EDX: f122e8fc [246916.338059] ESI: 00000000 EDI: 00000000 EBP: f6595d30 ESP: f6595d1c [246916.338062] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [246916.338064] Process insmod (pid: 29265, ti=f6594000 task=f7343fe0 task.ti=f6594000) [246916.338067] Stack: [246916.338068] c04a2920 22222222 f6595d48 00000000 f122f080 f6595d48 c02ca489 f122e8fc [246916.338076] f122e220 f122f080 f122e220 f6595d5c f8a03156 f122e220 f122f080 f122e220 [246916.338085] f6595d80 f87359af f122f080 00002000 f874e129 f122f150 f122f080 f6290000 [246916.338094] Call Trace: [246916.338096] [<c02ca489>] ? unregister_netdevice+0x19/0x70 [246916.338100] [<f8a03156>] ? ieee80211_unregister_hw+0x36/0xd0 [mac80211] [246916.338112] [<f87359af>] ? ath_detach+0xcf/0x250 [ath9k] [246916.338127] [<f8735d9c>] ? ath_attach+0x26c/0x740 [ath9k] [246916.338139] [<f873c33a>] ? ath_pci_probe+0x13a/0x310 [ath9k] [246916.338151] [<c0233e28>] ? _raw_spin_unlock+0x68/0x80 [246916.338158] [<c023ab8e>] ? local_pci_probe+0xe/0x10 [246916.338162] [<c023b8e0>] ? pci_device_probe+0x60/0x80 [246916.338169] [<c029e042>] ? driver_probe_device+0x82/0x1b0 [246916.338174] [<c029e1f9>] ? __driver_attach+0x89/0x90 [246916.338180] [<c029d97b>] ? bus_for_each_dev+0x4b/0x70 [246916.338184] [<c023b820>] ? pci_device_remove+0x0/0x40 [246916.338190] [<c029ded9>] ? driver_attach+0x19/0x20 [246916.338193] [<c029e170>] ? __driver_attach+0x0/0x90 [246916.338197] [<c029d317>] ? bus_add_driver+0x1b7/0x230 [246916.338203] [<c023b820>] ? pci_device_remove+0x0/0x40 [246916.338206] [<c029e399>] ? driver_register+0x69/0x140 [246916.338212] [<f859d000>] ? ath9k_init+0x0/0x54 [ath9k] [246916.338221] [<c023bb4e>] ? __pci_register_driver+0x4e/0x90 [246916.338225] [<f859d000>] ? ath9k_init+0x0/0x54 [ath9k] [246916.338232] [<f859d06b>] ? ath_pci_init+0x17/0x19 [ath9k] [246916.338238] [<f859d017>] ? ath9k_init+0x17/0x54 [ath9k] [246916.338245] [<c017148e>] ? tracepoint_update_probe_range+0x7e/0xb0 [246916.338249] [<c010111a>] ? do_one_initcall+0x2a/0x170 [246916.338252] [<c0149f26>] ? up_read+0x16/0x30 [246916.338256] [<c014aa9d>] ? __blocking_notifier_call_chain+0x4d/0x60 [246916.338265] [<c0162b1a>] ? sys_init_module+0x8a/0x1c0 [246916.338269] [<c022f888>] ? trace_hardirqs_on_thunk+0xc/0x10 [246916.338272] [<c0103ebf>] ? sysenter_do_call+0x12/0x43 [246916.338276] Code: 8d bc 27 00 00 00 00 55 89 e5 56 89 c6 53 83 ec 0c a1 74 27 4a c0 85 c0 0f 85 4b 01 00 00 e8 04 7d 00 00 85 c0 0f 84 c9 01 00 00 <8b> 86 18 03 00 00 85 c0 0f 84 86 01 00 00 83 e8 01 0f 85 71 01 [246916.338328] EIP: [<c02ca274>] rollback_registered+0x24/0x220 SS:ESP 0068:f6595d1c [246916.338335] ---[ end trace 76357c56a75ea34e ]--- Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Borzenkov 提交于
With DEBUG_NOTIFIERS it results in [11330.890966] WARNING: at /home/bor/src/linux-git/kernel/notifier.c:88 notifier_call_chain+0x91/0xa0() [11330.890977] Hardware name: PORTEGE 4000 [11330.890983] Invalid notifier called! ... Without DEBUG_NOTIFIERS it most likely crashes on NULL pointer. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Acked-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 2月, 2009 7 次提交
-
-
由 Hannes Eder 提交于
Fix sparse warning: drivers/net/wireless/prism54/isl_ioctl.c:2997:32: warning: incorrect type in argument 2 (different signedness) drivers/net/wireless/prism54/oid_mgt.c:712:42: warning: incorrect type in argument 2 (different signedness) Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Eder 提交于
Fix this sparse warnings: drivers/net/wireless/ipw2x00/ipw2100.c:1930:43: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:1938:76: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:1946:67: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:1953:72: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:4071:73: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:4078:43: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:4084:67: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:7141:73: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:8317:48: warning: incorrect type in argument 4 (different signedness) Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Eder 提交于
Fix this compilation warning: drivers/net/wireless/b43/main.c: In function 'b43_print_fw_helptext': drivers/net/wireless/b43/main.c:1971: warning: format not a string literal and no format arguments drivers/net/wireless/b43/main.c:1973: warning: format not a string literal and no format arguments Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Eder 提交于
Impact: Make symbols static. Fix this sparse warnings: drivers/net/wireless/ath9k/eeprom.c:1343:5: warning: symbol 'ath9k_hw_4k_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1372:19: warning: symbol 'eep_4k_ops' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2649:5: warning: symbol 'ath9k_hw_def_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2678:19: warning: symbol 'eep_def_ops' was not declared. Should it be static? Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Eder 提交于
Fix this sparse warnings: drivers/net/wireless/airo.c:2102:21: warning: incorrect type in initializer (different signedness) drivers/net/wireless/airo.c:2126:21: warning: incorrect type in initializer (different signedness) drivers/net/wireless/airo.c:2167:21: warning: incorrect type in initializer (different signedness) drivers/net/wireless/airo.c:2191:21: warning: incorrect type in initializer (different signedness) Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Eder 提交于
Impact: Move variable closer to usage resp. remove redundant variables resp. rename function scope variable. Fix this sparse warnings: drivers/net/wireless/airo.c:3840:29: warning: symbol 'i' shadows an earlier one drivers/net/wireless/airo.c:3751:13: originally declared here drivers/net/wireless/airo.c:3847:29: warning: symbol 'i' shadows an earlier one drivers/net/wireless/airo.c:3751:13: originally declared here drivers/net/wireless/airo.c:3861:21: warning: symbol 'i' shadows an earlier one drivers/net/wireless/airo.c:3751:13: originally declared here drivers/net/wireless/wavelan.c:43:13: warning: symbol 'irq' shadows an earlier one drivers/net/wireless/wavelan.p.h:692:17: originally declared here Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Eder 提交于
Impact: Attribute function with __acquires(...) resp. __releases(...). Fix this sparse warnings: drivers/net/wireless/strip.c:955:21: warning: context imbalance in 'strip_seq_start' - wrong count at exit drivers/net/wireless/strip.c:975:13: warning: context imbalance in 'strip_seq_stop' - unexpected unlock Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2009 1 次提交
-
-
由 Harvey Harrison 提交于
Use cpu_to_le32 directly as it handles constant folding now, replace direct uses of __constant_cpu_to_{endian} as well. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2009 10 次提交
-
-
由 Luis R. Rodriguez 提交于
We need the udelay() for all families, including AR5416. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is used for ASPM. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
The test to find out if we have FAT channels do not consider that the value of regulatory_bands for the 5000 series is larger than its eeprom size. Using the eeprom size is strange in itself. Use a new EEPROM_REGULATORY_BAND_NO_FAT to indicate no FAT support and test for that explicitly. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Tested-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch remove w/a used for development boards. These boards are not available thus no need to keep it inside driver Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch replaces where possible usage of pci register defined in the driver by ones defined in pci_regs.h Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Remove all the code from mac80211 to keep track of BSSes and use the cfg80211-provided code completely. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch adds basic scan capability to cfg80211/nl80211 and changes mac80211 to use it. The BSS list that cfg80211 maintains is made driver-accessible with a private area in each BSS struct, but mac80211 doesn't yet use it. That's another large project. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This makes zd1211rw honour enable_beacon, as well as fixing a memory leak: the beacon skb is leaked when configuring it to the hardware fails. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
It is rather confusing to see this in the log: [ 695.606877] __ratelimit: 40 callbacks suppressed [ 700.726878] __ratelimit: 40 callbacks suppressed without ever seeing any actual message. This is because zd1211rw doesn't compile out the net_ratelimit() call properly if debugging is not enabled. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-