The Renesas R-Car (Gen1) USB PHY driver (which is being removed) does
not support DT, and is thus useless in a generic ARM multi-platform
kernel.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

These two drivers were merged into the I2C sub-system by
commit dd6fd4a3 ("i2c: uniphier: add UniPhier FIFO-less I2C driver")
and commit 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C
driver").

Enable them from arch/arm/configs/multi_v7_defconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: NAnand Moon <linux.amoon@gmail.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them:

  * The pxa168 Ethernet driver is added as a loadable module.
  * The Berlin ADC driver is added as a loadable module.
  * Both the Berlin USB PHY and SATA PHY drivers are added,
    built-in, as they are required for the already available USB
    and SATA functionalities in multi_v7_defconfig.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable some options that have recently been enabled on Tegra platforms:

  * TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri
  * SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri
Signed-off-by: NThierry Reding <treding@nvidia.com>

The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The Flexcom device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Add Atmel SAMA5D2 SoC family to multi_v7 image.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

CONFIG_FIXED_PHY is needed to have Ethernet working on STi boards.

Select it as built-in since RootFS is accessible from NFS on these boards.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This patch enables all of the options necessary to support the Qualcomm SMD
RPM regulator driver.
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Similar to the power management situation on Rockchip boards, there are
two common RTC setups. For boards using the RK808 chip as a PMIC that
chip also serves as the RTC, while boards using the ACT8846 typically use
the Haoyu Microelectronics HYM8563 chip as their RTC.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Most Rockchip SoCs have a DesignWare HS OTG USB 2.0 controller, enable
the driver for the Rockchip USB 2.0 PHY to make that functional.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable options needed for HDMI out on rockchip: DRM driver, Rockchip
DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM
driver).
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Rockchip boards seem to have two common regulator setups. Various board
used the Active Semi act8846 often in combination with Silergy syr82x
regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc),
while others use regulator part of the Rockchip RK808 chip (e.g. the
various Veyron based chromebooks, Chipspark Popmetal etc)

Enable all these regulators.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable Rockchip I2C, SPI, PWM, thermal drivers.

Builtin are I2C (as it often required to control the pmic) and Thermal
drivers (to prevent thermal damage). SPI and PWM drivers configured as
modules
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch adds few missing essential configs in the multi_v7_defconf,
absense of some configs like PINCTRL_APQ8064 would prevent the board from
getting access to serial.

cc: Kevin Hilman <khilman@kernel.org>
cc: Tyler Baker <tyler.baker@linaro.org>
Tested-by: NAndy Gross <agross@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Defconfig multi_v7 for Allwinner A10/A20 CAN driver
Signed-off-by: NGerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Acked-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Kill of the defconfig bits now when the marzen-reference board code is gone.

Based on work by Magnus Damm.
Acked-by: NMagnus Damm <damm@opensource.se>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4,
OMAP5 and DRA7 SoCs. Enable it here.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Without this, the multi_v7_defconfig kernel cannot boot all CPUs
nor do deep cpuidle power saving on a TC2 board.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.

v2: fix object name for dw-hdmi (Fabio Estevam)
Signed-off-by: NThierry Reding <treding@nvidia.com>

Add Tegra-specific configuration options to multi_v7_defconfig:

  * HDA controller and codec support
  * Watchdog support
  * Nouveau (for GK20A GPU) support
Signed-off-by: NThierry Reding <treding@nvidia.com>

The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks
use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides
other devices, a set of regulators that can be controller over I2C.

Commit f3caa529 ("ARM: multi_v7_defconfig: Enable max77802 regulator,
rtc and clock drivers") was supposed to enable the config option for the
regulator driver as a module but the final version that landed did not
include this. The commit was modified and the REGULATOR_MAX77802 removed
since it was thought to be useless.

Unfortunately that's not the case for the mentioned reason above so this
patch enables the needed Kconfig option.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: fixed ordering according to make savedefconfig]
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable module support for its driver
and also for the needed Exynos ADC driver.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

The old drivers/usb/phy/phy-samsung-usb{2,3} are now deleted since
were replaced by newer drivers that use the Generic PHY framework
but their Kconfig options were left over in multi_v7_defconfig.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Let MX6UL and MX7D SoCs be selected by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

This patch enables Renesas DPCM related sound card.
It is used for...
 - Sampline rate convert
 - CTU/MIXer

Note: you need to enable these settings on DTS file
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903 ("serial: 8250_uniphier: add UniPhier serial
driver").

Enable it from multi_v7_defconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Commit b2b3a8b9 ("power/reset: Remove sun6i reboot driver") removed
the sun6i reboot driver. But sunxi_defconfig and multi_v7_defconfig
still contain the symbol CONFIG_POWER_RESET_SUN6I that was deprecated
by that commit, so remove it.
Signed-off-by: NTimo Sigurdsson <public_timo.s@silentcreek.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and
Cygnus/iProc under mach-bcm, this is enough critical mass to enable it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>