The patch "tty: now phase out the ioctl file pointer for good" missed
the tty3270 driver. This is the missing piece.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This caused a build error.  Many thanks to Stephen Rothwell for pointing
this mistake out.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This was to resolve a merge issue with drivers/char/Makefile and
drivers/tty/serial/68328serial.c
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, auto-flow control setting processing is not set correctly.
This patch fixes the issue.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, uart clock is not set correctly.
This patch fixes the issue.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For easy to understad which port the message is out,
replace pr_xxx with dev_xxx.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reduce memcpy for performance improvement.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, spin_lock is not initialized.
Thus, add spin_lock_init().
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, this driver can handle only single scatterlist.
Thus, it can't send data beyond FIFO size.

This patch enables this driver can handle multiple scatter list.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/generic_serial directory where they will be removed
after 2.6.41 if no one steps up to claim them.
	generic_serial
	rio
	ser_a2232
	sx
	vme_scc

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/tty/ directory where they will be removed after 2.6.41
if no one steps up to claim them.
	epca
	epca
	ip2
	istallion
	riscom8
	serial167
	specialix
	stallion

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As planned by Arnd Bergmann, this moves the ipwireless driver to the
drivers/tty/ directory as that's where it really belongs.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

port->flags is of type upf_t, which corresponds to UPF_* flags.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This will make it easier to get the driver to support device tree. The
old platform data method is still supported though.

Also change the driver to use only one platform device per port.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is not even used in nios2 arch code anymore.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes a sparse warning.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The three identical uart ports can work either in DMA or PIO mode. Adding such
a module parameter "hsu_dma_enable" will enable user to chose working modes for
each port. If the mfd driver is built in kernel, adding a "mfd.hsu_dma_enable=x"
in kernel command line has the same effect.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In A0 stepping, TX half-empty interrupt is not working, so have to
use the full-empty interrupts whose performance will be 15% lower.
Now re-enable the half-empty interrrupt after it is enabled in
silicon.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Alan missed the ia64 simulator serial driver (because it was hidden
in arch/... rather than located under drivers/... where one might
expect to find a driver).  Drop the "file *" argument from rs_ioctl()
in arch/ia64/hp/sim/simserial.c
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Kconfig options for the drivers/tty/ files still were hanging around
in the "big" drivers/char/Kconfig file, so move them to the proper
location under drivers/tty and drivers/tty/hvc/
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Copy up lower inode attrs in getattr
  ecryptfs: read on a directory should return EISDIR if not supported
  eCryptfs: Handle NULL nameidata pointers
  eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"

The current code does not follow Intel documentation: It misses some things
and does other, undocumented things. This causes wrong backlight values in
certain conditions. Instead of adding tricky code handling badly documented
and rare corner cases, don't handle combination mode specially at all. This
way PCI_LBPC is never touched and weird things shouldn't happen.

If combination mode is enabled, then the only downside is that changing the
brightness has a greater granularity (the LBPC value), but LBPC is at most
254 and the maximum is in the thousands, so this is no real functional loss.

A potential problem with not handling combined mode is that a brightness of
max * PCI_LBPC is not bright enough. However, this is very unlikely because
from the documentation LBPC seems to act as a scaling factor and doesn't look
like it's supposed to be changed after boot. The value at boot should always
result in a bright enough screen.

IMPORTANT: However, although usually the above is true, it may not be when
people ran an older (2.6.37) kernel which messed up the LBPC register, and
they are unlucky enough to have a BIOS that saves and restores the LBPC value.
Then a good kernel may seem to not work: Max brightness isn't bright enough.
If this happens people should boot back into the old kernel, set brightness
to the maximum, and then reboot. After that everything should be fine.

For more information see the below links. This fixes bugs:

  http://bugzilla.kernel.org/show_bug.cgi?id=23472
  http://bugzilla.kernel.org/show_bug.cgi?id=25072Signed-off-by: NIndan Zupancic <indan@nul.nu>
Tested-by: NAlex Riesen <raa.lkml@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We force particular alignment when we generate attribute structures
when generation MODULE_VERSION() data and we need to make sure that
this alignment is followed when we iterate over these structures,
otherwise we may crash on platforms whose natural alignment is not
sizeof(void *), such as m68k.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
[ There are more issues here, but the fixes are incredibly ugly - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  fixdep: Do not record dependency on the source file itself

Add fs/eventfd.c to filesystems docbook.
Make typo corrections in fs/eventfd.c.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the "log_buf_len" description to use [KMG] syntax for the
buffer size.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The '[KMG]' suffix is commonly described after a number of kernel
parameter values documentation.  Explicitly state its semantics.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Complete the crashkernel= kernel parameter documentation.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NSimon Horman <horms@verge.net.au>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: keep reference to parent inode on ceph_dentry
  ceph: queue cap_snaps once per realm
  libceph: fix socket write error handling
  libceph: fix socket read error handling

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix regulator names
  ARM: S5PV210: Update max8998_platform_data
  ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata
  ARM: S5P: Fix end address in memory resource information for UART devices
  ARM: S5P64X0: Cleanup map.h file
  ARM: S5P6442: Cleanup map.h file
  ARM: S5PC100: Clenaup map.h file
  ARM: S5PV210: Cleanup map.h file
  ARM: S5PV310: Cleanup map.h file

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] update cifs version
  cifs: Fix regression in LANMAN (LM) auth code
  cifs: fix handling of scopeid in cifs_convert_address

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6745/1: kprobes insn decoding fix
  ARM: tlb: move noMMU tlb_flush() to asm/tlb.h
  ARM: tlb: delay page freeing for SMP and ARMv7 CPUs
  ARM: Keep exit text/data around for SMP_ON_UP
  ARM: Ensure predictable endian state on signal handler entry
  ARM: 6740/1: Place correctly notes section in the linker script
  ARM: 6700/1: SPEAr: Correct SOC config base address for spear320
  ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset
  ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h
  ARM: 6720/1: SPEAr: Append UL to VMALLOC_END
  ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
  ARM: 6739/1: update .gitignore for boot/compressed
  ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation
  ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems
  ARM: 6741/1: errata: pl310 cache sync operation may be faulty

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] net: provide architecture specific NET_SKB_PAD
  [S390] atomic: use inline asm
  [S390] correct ipl parameter block safe guard
  [S390] atomic: use ACCESS_ONCE() for atomic_read()
  [S390] dasd: correct device table

Update version to 1.71 so we can more easily spot modules with the last two fixes
Signed-off-by: NSteve French <sfrench@us.ibm.com>

It is found on Dell Inspiron 1018 that the firmware reports that the hardware
killswitch is not supported. This makes the rfkill key not functional.

This patch forces the driver to toggle the firmware rfkill status in the case
that the hardware killswitch is indicated as unsupported by the firmware.
Signed-off-by: NKeng-Yu Lin <keng-yu.lin@canonical.com>
Tested-by: NAlessio Igor Bogani <abogani@texware.it>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>