The HE 6 GHz capability should only be included if there
are actually available channels on 6 GHz, and if that's
the case we need to get it from the 6 GHz band data, not
whatever other band we're on now.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.290bf5c87030.I178aff1c3a6e32456d4ac9238e4a2eb47d209ccd@changeid
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.05e935e8dd98.I83ff7eb2ae8ebdf2e30c4fa2461344d9e569f599@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We have mgd_prepare_tx(), but sometimes drivers may want/need
to take action when the exchange finishes, whether successfully
or not.

Add a notification to the driver on completion, i.e. call the
new method mgd_complete_tx().

To unify the two scenarios, and to add more information, make
both of them take a struct that has the duration (prepare only),
subtype (both) and success (complete only).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If HE/6GHz is available (thus we consider dot11HE6GOptionImplemented
to be true), then always include the corresponding capability in the
probe request as required by the spec.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.25ee4a54a7d0.I8cebd799c85524c8123a11941a104dbdefc03762@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

To discover a hidden AP on the 6GHz band, the probe request
sent to the AP needs to include the AP's SSID, as some APs
would not respond with a probe response based only on short
SSID match.

To support hidden AP discovery over the 6GHz band,
when constructing the specific 6GHz band scan also include
SSIDs that were part of the original scan request, so these
can be used in the probe requests transmitted during scan.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.218df9d3203c.Ice0f7a2f6a65f1f9710b7898591481baeefaf490@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

When sending an association request, add any vendor specific
capabilities at the end of the frame. This way, mac80211 is
still completely in charge of building the frame, but drivers
can determine what should be added depending on the band and
interface type.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.80d716d69a5f.I28097ff19be6b22aebdc33a72795d2662755d41f@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

There may be cases where vendor-specific elements need to be
used over the air. Rather than have driver or firmware add
them and possibly cause problems that way, add them to the
iftype-data band capabilities. This way we can advertise to
userspace first, and use them in mac80211 next.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.e8c4f0347276.Iee5964682b3e9ec51fc1cd57a7c62383eaf6ddd7@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We used to set regulatory info before the registration of
the device and then the regulatory info didn't get set, because
the device isn't registered so there isn't a device to set the
regulatory info for. So set the regulatory info after the device
registration.
Call reg_process_self_managed_hints() once again after the device
registration because it does nothing before it.
Signed-off-by: NMiri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c96eadcffe80.I86799c2c866b5610b4cf91115c21d8ceb525c5aa@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

While building probe requests, only enable HE capability if
there are actually any channels in the band with HE enabled,
otherwise we're not really capable. We're doing the same in
association requests, so doing it here makes it consistent.

This also makes HE not appear available if it isn't due to
regulatory constraints.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.b5513f2af335.Ic01862678712ae4238cea43ad2185928865efad2@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This helper function checks if there are any usable channels on
any of the given bands with the given properties (as expressed
by disallowed channel flags).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.2b613addaa85.Idaf8b859089490537878a7de5c7453a873a3f638@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

There's a WARN_ON here but it says nothing, and the later
dump of the regdomain aren't usually printed. As a first
step, include the regdomain code in the WARN_ON message,
just like in other similar instances.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.853ffdd6c62b.I63e37b2ab184ee3653686e4df4dd23eb303687d2@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This was mis-spelled in the policy, fix that.
Signed-off-by: NSosthène Guédon <sosthene@guedon.gdn>
Link: https://lore.kernel.org/r/YLkT27RG0DaWLUot@arch.localdomainSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Fix some spelling mistakes in comments:
freeed  ==> freed
addreses  ==> addresses
containging  ==> containing
capablity  ==> capability
sucess  ==> success
atleast  ==> at least
Signed-off-by: NZheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20210607150047.2855962-1-zhengyongjun3@huawei.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This function turned out to be too easy to misuse since it
doesn't consider the interface type. Remove it now that we
no longer use it in mac80211.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.8c9c72f914b0.I68e9c0626dc77a0f67f238a05ae16a0b77b09895@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

All uses of ieee80211_get_he_sta_cap() were actually wrong,
in net/mac80211/mlme.c they were wrong because that code is
also used for P2P (which is a different interface type), in
net/mac80211/main.c that should check all interface types.
Fix all that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.ede114bc8b46.Ibcd9a5d98430e936344eb6d242ef8a65c2f59b74@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add more information to the assoc trace event so we can see
more precisely what's going on and what options were used.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.86c58fca486d.Iabd8f036d2ef1d770fd20ed3ccd149f32154f430@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If the AP changes capability/bandwidth in some fashion, the
message might be somewhat misleading and we don't know what
really changed. Modify the message to speak about "caps/bw"
instead of just "bandwidth", and print out the flags.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.dc22c48985fa.I4bf5fbc17ec783c21d4b50c8c35b1de390896ccd@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We can slightly decrease the size of struct txq_info by
rearranging some fields for fewer holes, so do that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1bf019a1fe2e.Ib54622b8d6dc1a9a7dc484e573c073119450538b@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

One bit out of the previously completely reserved byte 10 in
the PHY capabilities is used since 802.11ax D7.0, add a new
define for it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c026feb3873d.I380f52a05ddb4153bc77ff7f276a3484819f69b2@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The following race was possible:

1. The device driver requests HW restart.
2. A scan is requested from user space and is propagated
   to the driver. During this flow HW_SCANNING flag is set.
3. The thread that handles the HW restart is scheduled,
   and before starting the actual reconfiguration it
   checks that HW_SCANNING is not set. The flow does so
   without acquiring any lock, and thus the WARN fires.

Fix this by checking that HW_SCANNING is on only after RTNL is
acquired, i.e., user space scan request handling is no longer
in transit.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.8238ab3e19ab.I2693c581c70251472b4f9089e37e06fb2c18268f@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

In NDP ranging, the initiator need to set the BSS color in the NDP
to the BSS color of the responder. Add the BSS color as a parameter
for NDP ranging.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f097a6144b59.I27dec8b994df52e691925ea61be4dd4fa6d396c0@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add to struct ieee80211_bss_conf a twt_broadcast field.
Set it to true if both STA and AP support broadcast TWT.
Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f7c105237541.I50b302044e2b35e5ed4d3fb8bc7bd3d8bb89b1e1@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Define the bit used for timing measurement support in extended
capabilities IE, used for time synchronization.
Signed-off-by: NKrishnanand Prabhu <krishnanand.prabhu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.b75f40765538.I92b50e43e29272c97d17ed5f37f216f4caf0f205@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

chanctx represents the current phy configuration and rate scale uses
it for achieving max throughput, so if phy changes bandwidth to narrow
bandwidth, RC should be _first_ updated to avoid using the wider bandwidth
before updating the phy, and vice versa.

We assume in the patch that station interface is always updated before
updating phy context by calling ieee80211_vif_update_chandef.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.fc4e24496aa2.Ic40ea947c2f65739ea4b5fe3babd0a544240ced6@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If, for some strange reason, ieee80211_wep_encrypt() fails in
ieee80211_send_auth() free the SKB instead of sending out the
useless frame, in addition to the warning. This can't really
happen since the SKB was freshly allocated.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.98f058d7a8b2.Ie605e6a10e72eae02f5734032826af48b85b6d11@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

ieee80211_mgd_assoc calls ieee80211_prep_connection which
might call ieee80211_prep_channel and set smps_mode to OFF.
That will override the previous setting of smps_mode in
ieee80211_mgd_assoc and HT SMPS will be set to "disabled"
in the association request frame.

Move the setting of smps_mode in ieee80211_mgd_assoc to
after the call to ieee80211_prep_connection.
Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.d8e5cc4b527f.Icf3a67fffbdd8c408c0cadfe43f8f4cffdc90acb@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The code currently allows this for AP mode, but then ignores
it. Clarify that since the spec doesn't allow it in AP mode.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.0465f8bcbe32.Iba39fc559ecfa887be00a5f3beabd881e5c86e54@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.

Fixes: 41cbb0f5 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Preparation work for removing the "enum rtw_ieee80211_category" in
"drivers/staging/rtl8188eu/include/ieee80211.h" and
"drivers/staging/rtl8723bs/include/ieee80211.h".

This enum is similar to "enum ieee80211_category" from
"include/linux/ieee80211.h". However it defines the value '6' as
RTW_WLAN_CATEGORY_FT.

So add a corresponding value in "ieee80211_category"
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/66be0187869bd7dae1c0b0785a32db695ee9872e.1624108556.git.christophe.jaillet@wanadoo.frSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The data go through mac80211_hwsim_tx_frame_no_nl() wasn't counted.
Signed-off-by: NNguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210622152429.881230-1-phind.uet@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This fixed the crash when setting channels to 2 or more when
communicating over virtio.
Signed-off-by: NWeilun Du <wdu@google.com>
Link: https://lore.kernel.org/r/20210506180530.3418576-1-wdu@google.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Table 9-251—Supported VHT-MCS and NSS Set subfields, it has subfield VHT Extended
NSS BW Capable, its definition is:
Indicates whether the STA is capable of interpreting the Extended NSS BW
Support subfield of the VHT Capabilities Information field.

This patch is to add check for the subfield.
Signed-off-by: NWen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210524033624.16993-1-wgong@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

offload_flags has been introduced to indicate encap status of each interface.
An interface can encap offload at runtime, or if it has some extra limitations
it can simply override the flags, so it's more flexible to check offload_flags
in Tx path.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/177785418cf407808bf3a44760302d0647076990.1623961575.git.ryder.lee@mediatek.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The software rate control cannot deal with encap offload, so fix it.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20210617163113.75815-3-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Make ieee80211_tx_h_rate_ctrl() get called on dequeue to improve
performance since it reduces the turnaround time for rate control.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20210617163113.75815-2-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This avoids calling back into tx handlers from within the rate control module.
Preparation for deferring rate control until tx dequeue
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210617163113.75815-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This will allow the low level driver to query the rfkill
state.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210616202826.9833-1-emmanuel.grumbach@intel.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We shouldn't open-code led_trigger_blink() or led_trigger_event(),
use them instead of badly open-coding them. This also fixes the
locking, led_trigger_blink() and led_trigger_event() now use
read_lock_irqsave().

Link: https://lore.kernel.org/r/20210616212804.b19ba1c60353.I8ea1b4defd5e12fc20ef281291e602feeec336a6@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If we have been keeping per-CPU statistics, consider them
regardless of USES_RSS, because we may not actually fill
those, for example in non-fast-RX cases when the connection
is not compatible with fast-RX. If we didn't fill them, the
additional data will be zero and not affect anything, and
if we did fill them then it's more correct to consider them.

This fixes an issue in mesh mode where some statistics are
not updated due to USES_RSS being set, but fast-RX isn't
used.
Reported-by: NThiraviyam Mariyappan <tmariyap@codeaurora.org>
Link: https://lore.kernel.org/r/20210610220814.13b35f5797c5.I511e9b33c5694e0d6cef4b6ae755c873d7c22124@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

In 2G band, a HE sta can only supports HT and HE, but not supports VHT.
In this case, default HE tx bitrate mask isn't filled, when we use iw to
set bitrates without any parameter.
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210609075944.51130-1-pkshih@realtek.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Function 'ieee80211_sta_set_rx_nss' is declared twice, so remove the
repeated declaration.
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1622196424-62403-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>