Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Structure mtd_info_user is copied to userland with padding byted
between "type" and "flags" fields uninitialized.  It leads to leaking
of contents of kernel stack memory.
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Implement cache program feature for 4KiB page onenand.
This feature improves the write data performance.
The observed 128KiB data program speed change is
from 8827KiB/s to 14156 KiB/s when the feature is enabled.
Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Some fixes are introduced into omap2 code to handle errors when
cache program feature is used.
Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

A new option is added for cache program feature. A new variable
ongoing is introduced for onenand_chip to handle the multi-command
cache program operation.
Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

When use the 2KiB pagesize, it should be set the correct page offset.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Nsrimugunthan  <srimugunthan.dhandapani@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Untested, but expected to be compatible with MX25L25635E which I did
test.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is a 256Mbit (32MiB) part so minor changes were made to support
4-byte addressing.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Commit b34bc037 removed the
"unrecognized JEDEC id" error message, causing the probe function to
silently abort if the flash ID is unrecognized.

It is desirable to produce diagnostic output in this situation so that
the user has some idea what went wrong.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

MTD_OF_PARTS should be possible on all architectures, not just
powerpc and microblaze, and it probably should not be a user
selectable option.  Neither does it need to be in a separate module.

Also, rework MTD Kconfig to group options dependant on MTD_PARTITIONS
into a if/endif block.  Do the same for MTD_REDBOOT_PARTS.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NGuillaume LECERF <glecerf@gmail.com>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

* git://git.infradead.org/mtd-2.6: (82 commits)
  mtd: fix build error in m25p80.c
  mtd: Remove redundant mutex from mtd_blkdevs.c
  MTD: Fix wrong check register_blkdev return value
  Revert "mtd: cleanup Kconfig dependencies"
  mtd: cfi_cmdset_0002: make sector erase command variable
  mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
  mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
  mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one
  block2mtd: dubious assignment
  P4080/mtd: Fix the freescale lbc issue with 36bit mode
  P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
  mtd: phram: use KBUILD_MODNAME
  mtd: OneNAND: S5PC110: Fix double call suspend & resume function
  mtd: nand: fix MTD_MODE_RAW writes
  jffs2: use kmemdup
  mtd: sm_ftl: cosmetic, use bool when possible
  mtd: r852: remove useless pci powerup/down from suspend/resume routines
  mtd: blktrans: fix a race vs kthread_stop
  mtd: blktrans: kill BKL
  mtd: allow to unload the mtdtrans module if its block devices aren't open
  ...

Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits)
  ARM: memblock: setup lowmem mappings using memblock
  ARM: memblock: move meminfo into find_limits directly
  ARM: memblock: convert free_highpages() to use memblock
  ARM: move freeing of highmem pages out of mem_init()
  ARM: memblock: convert memory detail printing to use memblock
  ARM: memblock: use memblock to free memory into arm_bootmem_init()
  ARM: memblock: use memblock when initializing memory allocators
  ARM: ensure membank array is always sorted
  ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
  ARM: 6464/2: fix spinlock recursion in adjust_pte()
  ARM: fix memblock breakage
  ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type
  ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt
  ARM: 6449/1: Fix for compiler warning of uninitialized variable.
  ARM: 6445/1: fixup TCM memory types
  ARM: imx: Add wake functionality to GPIO
  ARM: mx5: Add gpio-keys to mx51 babbage board
  ARM: imx: Add gpio-keys to plat-mxc
  mx31_3ds: Fix spi registration
  mx31_3ds: Fix the logic for detecting the debug board
  ...

The shmid_ds structure is copied to userland with shm_unused{,2,3}
fields unitialized.  It leads to leaking of contents of kernel stack
memory.
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Acked-by: NAl Viro <viro@ZenIV.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The definition of PAGE_CACHE_MASK in <linux/pagemap.h> is needed to use
MAX_RW_COUNT, and on x86-64 that gets done indirectly through the
architecture header includes.  But on MIPS and s390 that doesn't happen,
and we need to make sure that fs/compat.c includes pagemap.h explicitly.

Introduced in commit 435f49a5 ("readv/writev: do the same
MAX_RW_COUNT truncation that read/write does").

Reported-by: Sachin Sant <sachinp@in.ibm.com> (S390)
Reported-by: wu zhangjin <wuzhangjin@gmail.com> (MIPS)
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While building an x86 distro kernel, I hit the following:

Kernel: arch/x86/boot/bzImage is ready  (#7)
ERROR: "of_mtd_parse_partitions" [drivers/mtd/devices/m25p80.ko]
undefined!

of_mtd_parse_partitions is defined with MTD_OF_PARTS, and that's only
built on PPC and microblaze.  The code in question should be wrapped w/
a stricter #ifdef.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In commit 2a48fc0a ('block: autoconvert
trivial BKL users to private mutex'), Arnd replaced the BKL usage with a
mutex. However, Maxim has already provided a better fix in commit
480792b7 ('mtd: blktrans: kill BKL'),
which was simply to remove the BKL without replacing it — since he'd
already made it do all necessary locking for itself.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Conflicts:
	drivers/mtd/mtd_blkdevs.c

Merge Grant's device-tree bits so that we can apply the subsequent fixes.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

register_blkdev return 1..255 when major = 0.

if (ret ) {
	printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
		tr->name, tr->major, ret);
	      mutex_unlock(&mtd_table_mutex);
	return ret;
}

Above code will return fail when register_blkdev return allocated major number.
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, alternative: Call stop_machine_text_poke() on all cpus
  x86-32: Restore irq stacks NUMA-aware allocations
  x86, memblock: Fix early_node_mem with big reserved region.

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: More Westmere support on SGI UV
  x86, uv: Enable Westmere support on SGI UV

* 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  msm: Kconfig: drop unused config options
  msm: fix compile failure when no debug uart is selected
  msm: fix debug-macro.S build failure
  msm: timer: Decrease shift on timer clocksource
  arm: mach-msm: fix error handling in msm_iommu_probe()
  msm: fix Kconfig target board selection
  msm: fix compile failure on struct membank node member

* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
  drivers: msm: video: add dev_set_name call
  drivers: video: msm: fix hang on disable_irq

* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux:
  ARM: h1940: add UDA1380 to i2c devices list
  ARM: h1940: Fix backlight and LCD power functions
  ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
  ARM: S3C2440: various fixes in Kconfig file
  ARM: rx1950: Add UDA1380 to i2c devices list
  ARM: rx1950: Add LEDs support
  ARM: rx1950: Add battery device
  ARM: h1940: Implement mmc_power function
  ARM: h1940: Use gpiolib for latch access

Register UDA1380 codec during H1940 machine init
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Current implementation of LCD and backlight power control functions
is not complete, as result PDA consumes power in suspend.
Fix this issue by managing state of some latch bits, just like
WinMobile does.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Currently, text_poke_smp() passes a NULL as the third argument to
__stop_machine(), which will only run stop_machine_text_poke()
on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke()
is intended to be run on all cpus.

I actually didn't notice any problems with stop_machine_text_poke()
only being called on 1 cpu, but found this via code inspection.
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <20101028152026.GB2875@redhat.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Recent changes in s3c gpio break mini2440 board and may be others.
The problem is that mach-mini2440.c: mini2440_init()
(where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init()
(where we initialize s3c24xx_gpiocfg_default.set_pull function pointer).
This causes dereferencing of NULL pointer at boot time and a kernel panic.
Signed-off-by: NAbdoulaye Walsimou Gaye <awg@embtoolkit.org>

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available
  when ARCH_S3C2410 is selected, so no need to make some of them depend
  on ARCH_S3C2410.
* fix CPU_S3C24405B typo in "config S3C2440_DMA".
* mini2440: remove unconditionally select of SND_S3C24XX_SOC_S3C24XX_UDA134X.
Those fixes avoid the following warnings at make time:

scripts/kconfig/qconf arch/arm/Kconfig
warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X
which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410)
warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which
has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B)
warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410)
selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410)
Signed-off-by: NAbdoulaye Walsimou Gaye <awg@embtoolkit.org>

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux:
  i2c-intel-mid: Driver depends on PCI
  i2c-intel-mid: support for Moorestown and Medfield platform
  i2c-nomadik: fixup bus delays
  i2c-nomadik: support smbus emulation
  i2c-nomadik: dynamic clocking
  i2c-nomadik: documentation fixes
  i2c-s3c2410: Enable i2c clock only when doing some transfert

These two config options don't exist, and aren't ever going to.
So I simply delete them.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

If the board has a debug uart the user is given a choice of which
uart to use. The user can also select NONE, which means not to use one.
In most of our header files when NONE is selected nothing is defined
for MSM_DEBUG_UART_PHYS or MSM_DEBUG_UART_BASE. This causes a compile
failure in debug-macro.S which expect something to be defined there.

Example of the failure,

arch/arm/kernel/built-in.o: In function `hexbuf':
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_PHYS'
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_BASE'

This fixes the compile failure by adding an ifdef to debug-macro.S
that removes all the debug uart code in the case of NONE.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Originally there was an ifdef case to handle when no debug uart
was selected. In commit 0ea12930
that case was removed which causes the following build failure,

linux-2.6/arch/arm/kernel/debug.S: Assembler messages:
linux-2.6/arch/arm/kernel/debug.S:174: Error: bad instruction `addruart r1,r2'
linux-2.6/arch/arm/kernel/debug.S:176: Error: bad instruction `waituart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:177: Error: bad instruction `senduart r1,r3'
linux-2.6/arch/arm/kernel/debug.S:178: Error: bad instruction `busyuart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:190: Error: bad instruction `addruart r1,r2'

This is a partial revert to add back the case which was removed with
two caveats. First the API for the addruart macro was updated, and
the new addruart case now return 0xfff00000 so that a know IO mapping
is created instead of a random one.

Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jason Wang <jason77.wang@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

i2c-intel-mid driver uses PCI data structs and interfaces,
so it should depend on PCI.  Fixes these build errors:

drivers/i2c/busses/i2c-intel-mid.c:977: error: implicit declaration of function 'pci_request_region'
drivers/i2c/busses/i2c-intel-mid.c:1077: error: implicit declaration of function 'pci_release_region'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Ba Zheng <zheng.ba@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Fix typo in status comparison causing warning

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: Have streamline_config process menuconfigs too
  kconfig: Fix streamline_config to read multi line deps in Kconfig files
  kconfig: Fix missing declaration of variable $dir in streamline_config.pl
  kconfig: Fix variable name typo %prompts in streamline_config.pl
  kconfig: Make localmodconfig handle environment variables