As we only fetch the CPU_PLL frequency in gaudi, we don't need a
generic get_pll_frequency function which takes a pll index as input
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

When the F/W security is enabled, goya needs to fetch the PSOC pll
frequency through a dedicated interface
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Fix a compilation "missing braces around initializer" warning.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: NJoe Perches <joe@perches.com>
Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clang errors:

  drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
          }
          ^
  drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
  return 0;
          ^
  drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
  }
  ^
  3 errors generated.

The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.

Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.

Fix this by inverting the condition.

[bhelgaas: join string to make it greppable]
Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Commit b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:

In non-working case (next-20201211):

  0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
  0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
  0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)

In working case (v5.10-rc7):

  0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
  0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
  0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
  0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
  0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
  0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)

The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.

Fixes: b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.orgReported-by: NMian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: NMian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>

clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.

This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.

So just initialize 'val' to zero to avoid the issue.

Fixes: 110b055b ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Swap the calling sequence of krealloc() and __request_region(), call the
latter first. In this way, the value of dev_dax->nr_range does not need to
be considered when __request_region() failed.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201219081840.1149-2-thunder.leizhen@huawei.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>

There are multiple locations that open-code the release of the last
range in a device-dax instance. Consolidate this into a new
dev_dax_trim_range() helper.

This also addresses a kmemleak report:

# cat /sys/kernel/debug/kmemleak
[..]
unreferenced object 0xffff976bd46f6240 (size 64):
   comm "ndctl", pid 23556, jiffies 4299514316 (age 5406.733s)
   hex dump (first 32 bytes):
     00 00 00 00 00 00 00 00 00 00 20 c3 37 00 00 00  .......... .7...
     ff ff ff 7f 38 00 00 00 00 00 00 00 00 00 00 00  ....8...........
   backtrace:
     [<00000000064003cf>] __kmalloc_track_caller+0x136/0x379
     [<00000000d85e3c52>] krealloc+0x67/0x92
     [<00000000d7d3ba8a>] __alloc_dev_dax_range+0x73/0x25c
     [<0000000027d58626>] devm_create_dev_dax+0x27d/0x416
     [<00000000434abd43>] __dax_pmem_probe+0x1c9/0x1000 [dax_pmem_core]
     [<0000000083726c1c>] dax_pmem_probe+0x10/0x1f [dax_pmem]
     [<00000000b5f2319c>] nvdimm_bus_probe+0x9d/0x340 [libnvdimm]
     [<00000000c055e544>] really_probe+0x230/0x48d
     [<000000006cabd38e>] driver_probe_device+0x122/0x13b
     [<0000000029c7b95a>] device_driver_attach+0x5b/0x60
     [<0000000053e5659b>] bind_store+0xb7/0xc3
     [<00000000d3bdaadc>] drv_attr_store+0x27/0x31
     [<00000000949069c5>] sysfs_kf_write+0x4a/0x57
     [<000000004a8b5adf>] kernfs_fop_write+0x150/0x1e5
     [<00000000bded60f0>] __vfs_write+0x1b/0x34
     [<00000000b92900f0>] vfs_write+0xd8/0x1d1
Reported-by: NJane Chu <jane.chu@oracle.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/160834570161.1791850.14911670304441510419.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>

EDID parsing in S3 resume pushes new display modes
to probed_modes list but doesn't consolidate to actual
mode list. This creates a race condition when
amdgpu_dm_connector_ddc_get_modes() re-initializes the
list head without walking the list and results in  memory leak.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is not a scsi driver.
Reviewed-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes a crash in drm_object_property_set_value() because the property
is not set for internal DP ports that connect to a bridge chips
(e.g., DP to VGA or DP to LVDS).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739
Fixes: 65bf2cf9 ("drm/amdgpu: utilize subconnector property for DP through atombios")
Tested-By: NKris Karas <bugs-a17@moonlit-rail.com>
Cc: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x

This can suppress the annoying but unharmful prompts.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Add function to identify which MPCC is providing input to a specified OPP
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We defer clock updates to after pipes have been programmed. In
some instances we use DPPCLK that have been previously set to be
"unused". This results in a brief window of time where underflow
could occur.

[How]
During prepare bandwidth allow rn_update_clocks_update_dpp_dto
to check each instance and compare previous clock to new clock.
If new clock is higher than previous clock, program DPPDTO.
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- restore lvtma_pwrseq_delay2 from vbios integrated info table
- restore MVID/NVID after power up.
- Enable timer wake up mask when enable timer interrupt.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For certain timings, Renoir may underflow due to sr exit  latency
being too slow.

[How]
Updated wm table for renoir.
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
DSC should only be acquired per OPP. Therefore, DSC should only
be acquired for the top_pipe when ODM is enabled.
Not doing this check may lead to acquiring more DSC's than needed
when doing MPO + ODM Combine.

[HOW]
Only acquire DSC if pipe is top_pipe.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
FP2 programming not happening when topology changes occur with multiple
displays.

[How]
Ensure FP2 is programmed whenever global sync changes occur but wait for
VACTIVE first to avoid underflow.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
new_crtc_state is already dereferenced earlier in the function

[How]
Remove the check
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Virtual signals were previously counted as a workaround to S0i2 hang
which is fixed on Renoir. This blocks S0i3 diags testing.

[HOW]
Stop counting virtual signals as S0i2 hang is fixed on Renoir.
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
there is some garbage showing up during reboot test.
Reason:
SMU might handle display driver msg defered and driver will send
next msg to SMU after 10ms timeout, once SMU FW handle previous msg,
parameters are changed to next one, which result in a wrong value be programmed.

[How]
Extend timeout to 2s so SMU will have enough time to handle driver msg.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need driver to pass values of backlight ramp start and ramp reduction so
that intensity can be ramped down appropriately.

[How]
Using abm_parameters structure to get these values from driver.
Signed-off-by: NRizvi <syerizvi@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
The sink count change HPD_IRQ will be ignored if the branch device has only
DP DFP.

[how]
To remove the port type restriction.
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some MST display may not report the internal panel to DEVICE_COUNT,
that makes the check condition always failed.

[how]
To update this condition with the reported device count + 1
(because the immediate repeater's internal panel is possibly
not included in DEVICE_COUNT)
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank
and also toggle HUBP_DISABLE, which should instead be called
HUBP_SOFT_RESET for what it does in HW.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
handler is supposedly passed in as a function pointer;
however, the entire struct amdgpu_dm_irq_handler_data
gets from the list is used to check match.

[how]
use the interrupt_handler within amdgpu_dm_irq_handler_data
for checking match.
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GUI_IDLE interrupts controlled by CP_INT_CNTL_RING0
are only applicable to me0 pipe0.

For ASICs that have gfx pipe removed, don't toggle
those bits.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The number of crtc should be 0 for ASICs that don't
have display engine. Remove the unnecessary asic type
check then.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check number of gfx ring, rather than asic type,
before cp gfx engine initialization so driver just
need to make sure number of gfx ring is initialized
correctly in gfx early_init phase. No need to add
additional asic type check everywhere when there is
new asic with gfx pipe removed.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Replace a comma between expression statements by a semicolon.
Signed-off-by: NZheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: NColy Li <colyli@sue.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There have no reassign the bdev after check It is IS_ERR.
the double check !IS_ERR(bdev) is superfluous.

After commit 4e7b5671 ("block: remove i_bdev"),
"Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case).  This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code."

so after lookup_bdev call, there no need to do bdput.

remove a superfluous check the bdev & don't call bdput after lookup_bdev.

Fixes: 4e7b5671("block: remove i_bdev")
Signed-off-by: NYi Li <yili@winhong.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch includes a missing dependency (CRYPTO_AES) which may
lead to an "undefined reference to `aes_expandkey'" linking error.

Fixes: 5106dfea ("crypto: qat - add AES-XTS support for QAT GEN4 devices")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NMarco Chiappero <marco.chiappero@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add dependency for CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 on HAS_IOMEM to
prevent build failures.

Fixes: 88574332 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The Intel Keem Bay Offload and Crypto Subsystem (OCS) is only present on
Intel Keem Bay SoCs.  Hence add a dependency on ARCH_KEEMBAY, to prevent
asking the user about this driver when configuring a kernel without
Intel Keem Bay platform support.

While at it, fix a misspelling of "cipher".

Fixes: 88574332 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Voltages and current are reported by Zen CPUs. However, the means
to do so is undocumented, changes from CPU to CPU, and the raw data
is not calibrated. Calibration information is available, but again
not documented. This results in less than perfect user experience,
up to concerns that loading the driver might possibly damage
the hardware (by reporting out-of range voltages). Effectively
support for reporting voltages and current is not maintainable.
Drop it.

Cc: Artem S. Tashkinov <aros@gmx.com>
Cc: Wei Huang <wei.huang2@amd.com>
Tested-by: NWei Huang <wei.huang2@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify the return expression.
Signed-off-by: NZheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The definition of IS_ERR() already applies the unlikely() notation
when checking the error status of the passed pointer. For this
reason there is no need to have the same notation outside of
IS_ERR() itself.

Clean up code by removing redundant notation.
Signed-off-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

If emergency system shutdown is called, like by thermal shutdown,
a dm device could be alive when the block device couldn't process
I/O requests anymore. In this state, the handling of I/O errors
by new dm I/O requests or by those already in-flight can lead to
a verity corruption state, which is a misjudgment.

So, skip verity work in response to I/O error when system is shutting
down.
Signed-off-by: NHyeongseok Kim <hyeongseok@gmail.com>
Reviewed-by: NSami Tolvanen <samitolvanen@google.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>