While we have a transaction ongoing, the VM might decide at any time
to call btree_inode->i_mapping->a_ops->writepages(), which will start
writeback of dirty pages belonging to btree nodes/leafs. This call
might return an error or the writeback might finish with an error
before we attempt to commit the running transaction. If this happens,
we might have no way of knowing that such error happened when we are
committing the transaction - because the pages might no longer be
marked dirty nor tagged for writeback (if a subsequent modification
to the extent buffer didn't happen before the transaction commit) which
makes filemap_fdata[write|wait]_range unable to find such pages (even
if they're marked with SetPageError).
So if this happens we must abort the transaction, otherwise we commit
a super block with btree roots that point to btree nodes/leafs whose
content on disk is invalid - either garbage or the content of some
node/leaf from a past generation that got cowed or deleted and is no
longer valid (for this later case we end up getting error messages like
"parent transid verify failed on 10826481664 wanted 25748 found 29562"
when reading btree nodes/leafs from disk).

Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's
i_mapping would not be enough because we need to distinguish between
log tree extents (not fatal) vs non-log tree extents (fatal) and
because the next call to filemap_fdatawait_range() will catch and clear
such errors in the mapping - and that call might be from a log sync and
not from a transaction commit, which means we would not know about the
error at transaction commit time. Also, checking for the eb flag
EXTENT_BUFFER_IOERR at transaction commit time isn't done and would
not be completely reliable, as the eb might be removed from memory and
read back when trying to get it, which clears that flag right before
reading the eb's pages from disk, making us not know about the previous
write error.

Using the new 3 flags for the btree inode also makes us achieve the
goal of AS_EIO/AS_ENOSPC when writepages() returns success, started
writeback for all dirty pages and before filemap_fdatawait_range() is
called, the writeback for all dirty pages had already finished with
errors - because we were not using AS_EIO/AS_ENOSPC,
filemap_fdatawait_range() would return success, as it could not know
that writeback errors happened (the pages were no longer tagged for
writeback).
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Do like disk-io function declared under CONFIG_BTRFS_FS_RUN_SANITY_TESTS
and keep prototype in qgroup.h only
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NChris Mason <clm@fb.com>

cmp was declared twice in btrfs_compare_trees resulting in a shadow
warning. This patch renames second internal variable.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NChris Mason <clm@fb.com>

bi_sector and bi_size moved to bi_iter since commit 4f024f37
("block: Abstract out bvec iterator")
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NChris Mason <clm@fb.com>

This is actually inspired by Filipe's patch.  When write_one_eb() fails on
submit_extent_page(), it'll give up writing this eb and mark it with
EXTENT_BUFFER_IOERR.  So if it's not the last page that encounter the failure,
there are some left pages which remain DIRTY, and if a later COW on this eb
happens, ie. eb is COWed and freed, it'd run into BUG_ON in
btrfs_release_extent_buffer_page() for the DIRTY page, ie. BUG_ON(PageDirty(page));

This adds the missing clear_page_dirty_for_io() for the rest pages of eb.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

If submit_extent_page() fails in write_one_eb(), we end up with the current
page not marked dirty anymore, unlocked and marked for writeback. But we never
end up calling end_page_writeback() against the page, which will make calls to
filemap_fdatawait_range (e.g. at transaction commit time) hang forever waiting
for the writeback bit to be cleared from the page.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

Previous commit: btrfs: Fix and enhance merge_extent_mapping() to insert
best fitted extent map
is using wrong condition to judgement whether the range is a subset of a
existing extent map.

This may cause bug in btrfs no-holes mode.

This patch will correct the judgment and fix the bug.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Marc Merlin sent me a broken fs image months ago where it would blow up in the
upper->checked BUG_ON() in build_backref_tree.  This is because we had a
scenario like this

block a -- level 4 (not shared)
   |
block b -- level 3 (reloc block, shared)
   |
block c -- level 2 (not shared)
   |
block d -- level 1 (shared)
   |
block e -- level 0 (shared)

We go to build a backref tree for block e, we notice block d is shared and add
it to the list of blocks to lookup it's backrefs for.  Now when we loop around
we will check edges for the block, so we will see we looked up block c last
time.  So we lookup block d and then see that the block that points to it is
block c and we can just skip that edge since we've already been up this path.
The problem is because we clear need_check when we see block d (as it is shared)
we never add block b as needing to be checked.  And because block c is in our
path already we bail out before we walk up to block b and add it to the backref
check list.

To fix this we need to reset need_check if we trip over a block that doesn't
need to be checked.  This will make sure that any subsequent blocks in the path
as we're walking up afterwards are added to the list to be processed.  With this
patch I can now mount Marc's fs image and it'll complete the balance without
panicing.  Thanks,
Reported-by: NMarc MERLIN <marc@merlins.org>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When balance panics it tends to panic in the

BUG_ON(!upper->checked);

test, because it means it couldn't build the backref tree properly.  This is
annoying to users and frankly a recoverable error, nothing in this function is
actually fatal since it is just an in-memory building of the backrefs for a
given bytenr.  So go through and change all the BUG_ON()'s to ASSERT()'s, and
fix the BUG_ON(!upper->checked) thing to just return an error.

This patch also fixes the error handling so it tears down the work we've done
properly.  This code was horribly broken since we always just panic'ed instead
of actually erroring out, so it needed to be completely re-worked.  With this
patch my broken image no longer panics when I mount it.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When doing log replay we may have to update inodes, which traditionally goes
through our delayed inode stuff.  This will try to move space over from the
trans handle, but we don't reserve space in our trans handle on replay since we
don't know how much we will need, so instead we try to flush.  But because we
have a trans handle open we won't flush anything, so if we are out of reserve
space we will simply return ENOSPC.  Since we know that if an operation made it
into the log then we definitely had space before the box bought the farm then we
don't need to worry about doing this space reservation.  Use the
fs_info->log_root_recovering flag to skip the delayed inode stuff and update the
item directly.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Trying to reproduce a log enospc bug I hit a panic in the async reclaim code
during log replay.  This is because we use fs_info->fs_root as our root for
shrinking and such.  Technically we can use whatever root we want, but let's
just not allow async reclaim while we're doing log replay.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

One problem that has plagued us is that a user will use up all of his space with
data, remove a bunch of that data, and then try to create a bunch of small files
and run out of space.  This happens because all the chunks were allocated for
data since the metadata requirements were so low.  But now there's a bunch of
empty data block groups and not enough metadata space to do anything.  This
patch solves this problem by automatically deleting empty block groups.  If we
notice the used count go down to 0 when deleting or on mount notice that a block
group has a used count of 0 then we will queue it to be deleted.

When the cleaner thread runs we will double check to make sure the block group
is still empty and then we will delete it.  This patch has the side effect of no
longer having a bunch of BUG_ON()'s in the chunk delete code, which will be
helpful for both this and relocate.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When we do a fast fsync, we start all ordered operations and then while
they're running in parallel we visit the list of modified extent maps
and construct their matching file extent items and write them to the
log btree. After that, in btrfs_sync_log() we wait for all the ordered
operations to finish (via btrfs_wait_logged_extents).

The problem with this is that we were completely ignoring errors that
can happen in the extent write path, such as -ENOSPC, a temporary -ENOMEM
or -EIO errors for example. When such error happens, it means we have parts
of the on disk extent that weren't written to, and so we end up logging
file extent items that point to these extents that contain garbage/random
data - so after a crash/reboot plus log replay, we get our inode's metadata
pointing to those extents.

This worked in contrast with the full (non-fast) fsync path, where we
start all ordered operations, wait for them to finish and then write
to the log btree. In this path, after each ordered operation completes
we check if it's flagged with an error (BTRFS_ORDERED_IOERR) and return
-EIO if so (via btrfs_wait_ordered_range).

So if an error happens with any ordered operation, just return a -EIO
error to userspace, so that it knows that not all of its previous writes
were durably persisted and the application can take proper action (like
redo the writes for e.g.) - and definitely not leave any file extent items
in the log refer to non fully written extents.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

When the fsync callback (btrfs_sync_file) starts, it first waits for
the writeback of any dirty pages to start and finish without holding
the inode's mutex (to reduce contention). After this it acquires the
inode's mutex and repeats that process via btrfs_wait_ordered_range
only if we're doing a full sync (BTRFS_INODE_NEEDS_FULL_SYNC flag
is set on the inode).

This is not safe for a non full sync - we need to start and wait for
writeback to finish for any pages that might have been made dirty
before acquiring the inode's mutex and after that first step mentioned
before. Why this is needed is explained by the following comment added
to btrfs_sync_file:

  "Right before acquiring the inode's mutex, we might have new
   writes dirtying pages, which won't immediately start the
   respective ordered operations - that is done through the
   fill_delalloc callbacks invoked from the writepage and
   writepages address space operations. So make sure we start
   all ordered operations before starting to log our inode. Not
   doing this means that while logging the inode, writeback
   could start and invoke writepage/writepages, which would call
   the fill_delalloc callbacks (cow_file_range,
   submit_compressed_extents). These callbacks add first an
   extent map to the modified list of extents and then create
   the respective ordered operation, which means in
   tree-log.c:btrfs_log_inode() we might capture all existing
   ordered operations (with btrfs_get_logged_extents()) before
   the fill_delalloc callback adds its ordered operation, and by
   the time we visit the modified list of extent maps (with
   btrfs_log_changed_extents()), we see and process the extent
   map they created. We then use the extent map to construct a
   file extent item for logging without waiting for the
   respective ordered operation to finish - this file extent
   item points to a disk location that might not have yet been
   written to, containing random data - so after a crash a log
   replay will make our inode have file extent items that point
   to disk locations containing invalid data, as we returned
   success to userspace without waiting for the respective
   ordered operation to finish, because it wasn't captured by
   btrfs_get_logged_extents()."
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

The tracepoint of extent map doesn't parse @flag correctly, we set @flag via
set_bit(), so we need to parse it on a bit bias.

Also add the missing flag, EXTENT_FLAG_FS_MAPPING.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

The following commit enhanced the merge_extent_mapping() to reduce
fragment in extent map tree, but it can't handle case which existing
lies before map_start:
51f39 btrfs: Use right extent length when inserting overlap extent map.

[BUG]
When existing extent map's start is before map_start,
the em->len will be minus, which will corrupt the extent map and fail to
insert the new extent map.
This will happen when someone get a large extent map, but when it is
going to insert it into extent map tree, some one has already commit
some write and split the huge extent into small parts.

[REPRODUCER]
It is very easy to tiger using filebench with randomrw personality.
It is about 100% to reproduce when using 8G preallocated file in 60s
randonrw test.

[FIX]
This patch can now handle any existing extent position.
Since it does not directly use existing->start, now it will find the
previous and next extent around map_start.
So the old existing->start < map_start bug will never happen again.

[ENHANCE]
This patch will insert the best fitted extent map into extent map tree,
other than the oldest [map_start, map_start + sectorsize) or the
relatively newer but not perfect [map_start, existing->start).

The patch will first search existing extent that does not intersects with
the desired map range [map_start, map_start + len).
The existing extent will be either before or behind map_start, and based
on the existing extent, we can find out the previous and next extent
around map_start.

So the best fitted extent would be [prev->end, next->start).
For prev or next is not found, em->start would be prev->end and em->end
wold be next->start.

With this patch, the fragment in extent map tree should be reduced much
more than the 51f39 commit and reduce an unneeded extent map tree search.
Reported-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

An user reported this, it is because that lseek's SEEK_SET/SEEK_CUR/SEEK_END
allow a negative value for @offset, but btrfs's SEEK_DATA/SEEK_HOLE don't
prepare for that and convert the negative @offset into unsigned type,
so we get (end < start) warning.

[ 1269.835374] ------------[ cut here ]------------
[ 1269.836809] WARNING: CPU: 0 PID: 1241 at fs/btrfs/extent_io.c:430 insert_state+0x11d/0x140()
[ 1269.838816] BTRFS: end < start 4094 18446744073709551615
[ 1269.840334] CPU: 0 PID: 1241 Comm: a.out Tainted: G        W      3.16.0+ #306
[ 1269.858229] Call Trace:
[ 1269.858612]  [<ffffffff81801a69>] dump_stack+0x4e/0x68
[ 1269.858952]  [<ffffffff8107894c>] warn_slowpath_common+0x8c/0xc0
[ 1269.859416]  [<ffffffff81078a36>] warn_slowpath_fmt+0x46/0x50
[ 1269.859929]  [<ffffffff813b0fbd>] insert_state+0x11d/0x140
[ 1269.860409]  [<ffffffff813b1396>] __set_extent_bit+0x3b6/0x4e0
[ 1269.860805]  [<ffffffff813b21c7>] lock_extent_bits+0x87/0x200
[ 1269.861697]  [<ffffffff813a5b28>] btrfs_file_llseek+0x148/0x2a0
[ 1269.862168]  [<ffffffff811f201e>] SyS_lseek+0xae/0xc0
[ 1269.862620]  [<ffffffff8180b212>] system_call_fastpath+0x16/0x1b
[ 1269.862970] ---[ end trace 4d33ea885832054b ]---

This assumes that btrfs starts finding DATA/HOLE from the beginning of file
if the assigned @offset is negative.

Also we add alignment for lock_extent_bits 's range.
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

After the data is written successfully, we should cleanup the read failure record
in that range because
- If we set data COW for the file, the range that the failure record pointed to is
  mapped to a new place, so it is invalid.
- If we set no data COW for the file, and if there is no error during writting,
  the corrupted data is corrected, so the failure record can be removed. And if
  some errors happen on the mirrors, we also needn't worry about it because the
  failure record will be recreated if we read the same place again.

Sometimes, we may fail to correct the data, so the failure records will be left
in the tree, we need free them when we free the inode or the memory leak happens.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch implement data repair function when direct read fails.

The detail of the implementation is:
- When we find the data is not right, we try to read the data from the other
  mirror.
- When the io on the mirror ends, we will insert the endio work into the
  dedicated btrfs workqueue, not common read endio workqueue, because the
  original endio work is still blocked in the btrfs endio workqueue, if we
  insert the endio work of the io on the mirror into that workqueue, deadlock
  would happen.
- After we get right data, we write it back to the corrupted mirror.
- And if the data on the new mirror is still corrupted, we will try next
  mirror until we read right data or all the mirrors are traversed.
- After the above work, we set the uptodate flag according to the result.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We need real mirror number for RAID0/5/6 when reading data, or if read error
happens, we would pass 0 as the number of the mirror on which the io error
happens. It is wrong and would cause the filesystem read the data from the
corrupted mirror again.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We could not use clean_io_failure in the direct IO path because it got the
filesystem information from the page structure, but the page in the direct
IO bio didn't have the filesystem information in its structure. So we need
modify it and pass all the information it need by parameters.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The original code of repair_io_failure was just used for buffered read,
because it got some filesystem data from page structure, it is safe for
the page in the page cache. But when we do a direct read, the pages in bio
are not in the page cache, that is there is no filesystem data in the page
structure. In order to implement direct read data repair, we need modify
repair_io_failure and pass all filesystem data it need by function
parameters.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The data repair function of direct read will be implemented later, and some code
in bio_readpage_error will be reused, so split bio_readpage_error into
several functions which will be used in direct read repair later.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We forgot to free failure record and bio after submitting re-read bio failed,
fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Direct IO splits the original bio to several sub-bios because of the limit of
raid stripe, and the filesystem will wait for all sub-bios and then run final
end io process.

But it was very hard to implement the data repair when dio read failure happens,
because at the final end io function, we didn't know which mirror the data was
read from. So in order to implement the data repair, we have to move the file data
check in the final end io function to the sub-bio end io function, in which we can
get the mirror number of the device we access. This patch did this work as the
first step of the direct io data repair implementation.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The current code would load checksum data for several times when we split
a whole direct read io because of the limit of the raid stripe, it would
make us search the csum tree for several times. In fact, it just wasted time,
and made the contention of the csum tree root be more serious. This patch
improves this problem by loading the data at once.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

rw_devices counter is often used to tune the profile when doing chunk allocation,
so we should modify it under the chunk_mutex context to avoid getting wrong
chunk profile.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

For a missing device, we don't know it belong to which fs before we read its
fsid from the chunk tree. So we add them into the current fs device list at first.
When we get its fsid, we should move them to their own fs device list.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

When we open a seed filesystem, if the degraded mount option is set, we continue to
mount the fs if we don't find some devices in the seed filesystem. But we should stop
mounting if other errors happen. Fix it
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The problem is:
	Task0(device scan task)		Task1(device replace task)
	scan_one_device()
	mutex_lock(&uuid_mutex)
	device = find_device()
					mutex_lock(&device_list_mutex)
					lock_chunk()
					rm_and_free_source_device
					unlock_chunk()
					mutex_unlock(&device_list_mutex)
	check device

Destroying the target device if device replace fails also has the same problem.

We fix this problem by locking uuid_mutex during destroying source device or
target device, just like the device remove operation.

It is a temporary solution, we can fix this problem and make the code more
clear by atomic counter in the future.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We can build a new filesystem based a seed filesystem, and we need clone
the fs devices when we open the new filesystem. But someone might clear
the seed flag of the seed filesystem, then mount that filesystem and
remove some device. If we mount the new filesystem, we might access
a device list which was being changed when we clone the fs devices.
Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

There were several problems about chunk mutex usage:
- Lock chunk mutex when updating metadata. It would cause the nested
  deadlock because updating metadata might need allocate new chunks
  that need acquire chunk mutex. We remove chunk mutex at this case,
  because b-tree lock and other lock mechanism can help us.
- ABBA deadlock occured between device_list_mutex and chunk_mutex.
  When we update device status, we must acquire device_list_mutex at the
  beginning, and then we might get chunk_mutex during the device status
  update because we need allocate new chunks for metadata COW. But at
  most place, we acquire chunk_mutex at first and then acquire device list
  mutex. We need change the lock order.
- Some place we needn't acquire chunk_mutex. For example we needn't get
  chunk_mutex when we free a empty seed fs_devices structure.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

When we get the fs information, we forgot to acquire the mutex of device list,
it might cause the problem we might access a device that was removed. Fix
it by acquiring the device list mutex.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We didn't protect the system chunk array when we added a new
system chunk into it, it would cause the array be corrupted
if someone remove/add some system chunk into array at the same
time. Fix it by chunk lock.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

->total_bytes,->disk_total_bytes,->bytes_used is protected by chunk
lock when we change them, but sometimes we read them without any lock,
and we might get unexpected value. We fix this problem like inode's
i_size.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We should update free_chunk_space in time when we allocate a new chunk,
not when we deal with the pending device update and block group insertion,
because we need the real free_chunk_space data to calculate the reserved
space, if we don't update it in time, we would consider the disk space which
has be allocated as free space, and would use it to do overcommit reservation.
Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We should update device->bytes_used in the lock context of
chunk_mutex, or we would get wrong data.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>