When assigning kvm irqfd we didn't check the irqchip mode but we allow
KVM_IRQFD to succeed with all the irqchip modes.  However it does not
make much sense to create irqfd even without the kernel chips.  Let's
provide a arch-dependent helper to check whether a specific irqfd is
allowed by the arch.  At least for x86, it should make sense to check:

- when irqchip mode is NONE, all irqfds should be disallowed, and,

- when irqchip mode is SPLIT, irqfds that are with resamplefd should
  be disallowed.

For either of the case, previously we'll silently ignore the irq or
the irq ack event if the irqchip mode is incorrect.  However that can
cause misterious guest behaviors and it can be hard to triage.  Let's
fail KVM_IRQFD even earlier to detect these incorrect configurations.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Radim Krčmář <rkrcmar@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.

Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The guest_code of sync_regs_test is assuming that the compiler will not
touch %r11 outside the asm that increments it, which is a bit brittle.
Instead, we can increment a variable and use a dummy asm to ensure the
increment is not optimized away.  However, we also need to use a
callee-save register or the compiler will insert a save/restore around
the vmexit, breaking the whole idea behind the test.

(Yes, "if it ain't broken...", but I would like the test to be clean
before it is copied into the upcoming s390 selftests).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The check for entry->index == 0 is done twice. One time should
be sufficient.
Suggested-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose per-vCPU timer_advance_ns to userspace, so it is able to
query the auto-adjusted value.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After commit c3941d9e (KVM: lapic: Allow user to disable adaptive tuning of
timer advancement), '-1' enables adaptive tuning starting from default
advancment of 1000ns. However, we should expose an int instead of an overflow
uint module parameter.

Before patch:

/sys/module/kvm/parameters/lapic_timer_advance_ns:4294967295

After patch:

/sys/module/kvm/parameters/lapic_timer_advance_ns:-1

Fixes: c3941d9e (KVM: lapic: Allow user to disable adaptive tuning of timer advancement)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We get a warning when build kernel W=1:
arch/x86/kvm/vmx/vmx.c:6365:6: warning: no previous prototype for ‘vmx_update_host_rsp’ [-Wmissing-prototypes]
 void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)

Add the missing declaration to fix this.
Signed-off-by: NYi Wang <wang.yi59@zte.com.cn>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

 BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/4590
  caller is nested_vmx_enter_non_root_mode+0xebd/0x1790 [kvm_intel]
  CPU: 4 PID: 4590 Comm: qemu-system-x86 Tainted: G           OE     5.1.0-rc4+ #1
  Call Trace:
   dump_stack+0x67/0x95
   __this_cpu_preempt_check+0xd2/0xe0
   nested_vmx_enter_non_root_mode+0xebd/0x1790 [kvm_intel]
   nested_vmx_run+0xda/0x2b0 [kvm_intel]
   handle_vmlaunch+0x13/0x20 [kvm_intel]
   vmx_handle_exit+0xbd/0x660 [kvm_intel]
   kvm_arch_vcpu_ioctl_run+0xa2c/0x1e50 [kvm]
   kvm_vcpu_ioctl+0x3ad/0x6d0 [kvm]
   do_vfs_ioctl+0xa5/0x6e0
   ksys_ioctl+0x6d/0x80
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x6f/0x6c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Accessing per-cpu variable should disable preemption, this patch extends the
preemption disable region for __this_cpu_read().

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Fixes: 52017608 ("KVM: nVMX: add option to perform early consistency checks via H/W")
Cc: stable@vger.kernel.org
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

s390 does not have memremap, even though in this particular case it
would be useful.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Kvm now supports extended CPUID functions through 0x8000001f.  CPUID
leaf 0x8000001e is AMD's Processor Topology Information leaf. This
contains similar information to CPUID leaf 0xb (Intel's Extended
Topology Enumeration leaf), and should be included in the output of
KVM_GET_SUPPORTED_CPUID, even though userspace is likely to override
some of this information based upon the configuration of the
particular VM.

Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Fixes: 8765d753 ("KVM: X86: Extend CPUID range to include new leaf")
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NMarc Orr <marcorr@google.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Per the APM, "CPUID Fn8000_001D_E[D,C,B,A]X reports cache topology
information for the cache enumerated by the value passed to the
instruction in ECX, referred to as Cache n in the following
description. To gather information for all cache levels, software must
repeatedly execute CPUID with 8000_001Dh in EAX and ECX set to
increasing values beginning with 0 until a value of 00h is returned in
the field CacheType (EAX[4:0]) indicating no more cache descriptions
are available for this processor."

The termination condition is the same as leaf 4, so we can reuse that
code block for leaf 0x8000001d.

Fixes: 8765d753 ("KVM: X86: Extend CPUID range to include new leaf")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NMarc Orr <marcorr@google.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

So far the KVM selftests are compiled without any compiler warnings
enabled. That's quite bad, since we miss a lot of possible bugs this
way. Let's enable at least "-Wall" and some other useful warning flags
now, and fix at least the trivial problems in the code (like unused
variables).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid warnings from -Wstrict-aliasing by using memcpy.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The code is trying to check that all the padding is zeroed out and it
does this:

    entry->padding[0] == entry->padding[1] == entry->padding[2] == 0

Assume everything is zeroed correctly, then the first comparison is
true, the next comparison is false and false is equal to zero so the
overall condition is true.  This bug doesn't affect run time very
badly, but the code should instead just check that all three paddings
are zero individually.

Also the error message was copy and pasted from an earlier error and it
wasn't correct.

Fixes: 7edcb734 ("KVM: selftests: Add hyperv_cpuid test")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

 WARNING: CPU: 0 PID: 13554 at kvm/arch/x86/kvm//../../../virt/kvm/kvm_main.c:4183 kvm_resume+0x3c/0x40 [kvm]
  CPU: 0 PID: 13554 Comm: step_after_susp Tainted: G           OE     5.1.0-rc4+ #1
  RIP: 0010:kvm_resume+0x3c/0x40 [kvm]
  Call Trace:
   syscore_resume+0x63/0x2d0
   suspend_devices_and_enter+0x9d1/0xa40
   pm_suspend+0x33a/0x3b0
   state_store+0x82/0xf0
   kobj_attr_store+0x12/0x20
   sysfs_kf_write+0x4b/0x60
   kernfs_fop_write+0x120/0x1a0
   __vfs_write+0x1b/0x40
   vfs_write+0xcd/0x1d0
   ksys_write+0x5f/0xe0
   __x64_sys_write+0x1a/0x20
   do_syscall_64+0x6f/0x6c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Commit ca84d1a2 (KVM: x86: Add clock sync request to hardware enable) mentioned
that "we always hold kvm_lock when hardware_enable is called.  The one place that
doesn't need to worry about it is resume, as resuming a frozen CPU, the spinlock
won't be taken." However, commit 6706dae9 (virt/kvm: Replace spin_is_locked() with
lockdep) introduces a bug, it asserts when the lock is not held which is contrary
to the original goal.

This patch fixes it by WARN_ON when the lock is held.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Fixes: 6706dae9 ("virt/kvm: Replace spin_is_locked() with lockdep")
[Wrap with #ifdef CONFIG_LOCKDEP - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

VMX's nested_run_pending flag is subtly consumed when stuffing state to
enter guest mode, i.e. needs to be set according before KVM knows if
setting guest state is successful.  If setting guest state fails, clear
the flag as a nested run is obviously not pending.
Reported-by: NAaron Lewis <aaronlewis@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The offset for reading the shadow VMCS is sizeof(*kvm_state)+VMCS12_SIZE,
so the correct size must be that plus sizeof(*vmcs12).  This could lead
to KVM reading garbage data from userspace and not reporting an error,
but is otherwise not sensitive.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm updates for 5.2-rc2

- Correctly annotate HYP-callable code to be non-traceable
- Remove Christoffer from the MAINTAINERS file as his request

KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.

Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.

Fixes: 021234ef ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2")
Fixes: 8cebe750 ("arm64: KVM: Make kvm_skip_instr32 available to HYP")
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

KVM's pmu.c contains the __hyp_text needed to switch the pmu registers
between host and guest. Because this isn't covered by the 'hyp' Makefile,
it can be built with kasan and friends when these are enabled in Kconfig.

When starting a guest, this results in:
| Kernel panic - not syncing: HYP panic:
| PS:a00003c9 PC:000083000028ada0 ESR:86000007
| FAR:000083000028ada0 HPFAR:0000000029df5300 PAR:0000000000000000
| VCPU:000000004e10b7d6
| CPU: 0 PID: 3088 Comm: qemu-system-aar Not tainted 5.2.0-rc1 #11026
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Plat
| Call trace:
|  dump_backtrace+0x0/0x200
|  show_stack+0x20/0x30
|  dump_stack+0xec/0x158
|  panic+0x1ec/0x420
|  panic+0x0/0x420
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x002,25006082
| Memory Limit: none
| ---[ end Kernel panic - not syncing: HYP panic:

This is caused by functions in pmu.c calling the instrumented
code, which isn't mapped to hyp. From objdump -r:
| RELOCATION RECORDS FOR [.hyp.text]:
| OFFSET           TYPE              VALUE
| 0000000000000010 R_AARCH64_CALL26  __sanitizer_cov_trace_pc
| 0000000000000018 R_AARCH64_CALL26  __asan_load4_noabort
| 0000000000000024 R_AARCH64_CALL26  __asan_load4_noabort

Move the affected code to a new file under 'hyp's Makefile.

Fixes: 3d91befb ("arm64: KVM: Enable !VHE support for :G/:H perf event modifiers")
Cc: Andrew Murray <Andrew.Murray@arm.com>
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

I no longer have time to actively review patches and manage the tree and
it's time to make that official.

Huge thanks to the incredible Linux community and all the contributors
who have put up with me over the past years.

I also take this opportunity to remove the website link to the Columbia
web page, as that information is no longer up to date and I don't know
who manages that anymore.
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Merge tag 'kvm-s390-master-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes for s390

- Fix typo in module parameter description
- Change default poll timer to improve cpu consumption

Recent measurements indicate that using 50us results in a reduced CPU
consumption, while still providing the benefit of halt polling. Let's
use 50us instead.
Acked-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NJanosch Frank <frankja@linux.ibm.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Fix typo in parameter description.

Fixes: 8b905d28 ("KVM: s390: provide kvm_arch_no_poll function")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20190504065145.53665-1-weiyongjun1@huawei.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Pull UBIFS fixes from Richard Weinberger:

 - build errors wrt xattrs

 - mismerge which lead to a wrong Kconfig ifdef

 - missing endianness conversion

* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Convert xattr inum to host order
  ubifs: Use correct config name for encryption
  ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR

Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation

Pull more Kbuild updates from Masahiro Yamada:

 - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption

 - exclude tracked files from .gitignore

 - re-enable -Wint-in-bool-context warning

 - refactor samples/Makefile

 - stop building immediately if syncconfig fails

 - do not sprinkle error messages when $(CC) does not exist

 - move arch/alpha/defconfig to the configs subdirectory

 - remove crappy header search path manipulation

 - add comment lines to .config to clarify the end of menu blocks

 - check uniqueness of module names (adding new warnings intentionally)

* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: use 'else ifneq' for Makefile to improve readability
  kbuild: check uniqueness of module names
  kconfig: Terminate menu blocks with a comment in the generated config
  kbuild: add LICENSES to KBUILD_ALLDIRS
  kbuild: remove 'addtree' and 'flags' magic for header search paths
  treewide: prefix header search paths with $(srctree)/
  media: prefix header search paths with $(srctree)/
  media: remove unneeded header search paths
  alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
  kbuild: terminate Kconfig when $(CC) or $(LD) is missing
  kbuild: turn auto.conf.cmd into a mandatory include file
  .gitignore: exclude .get_maintainer.ignore and .gitattributes
  kbuild: add all Clang-specific flags unconditionally
  kbuild: Don't try to add '-fcatch-undefined-behavior' flag
  kbuild: add some extra warning flags unconditionally
  kbuild: add -Wvla flag unconditionally
  arch: remove dangling asm-generic wrappers
  samples: guard sub-directories with CONFIG options
  kbuild: re-enable int-in-bool-context warning
  MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
  ...

Pull i2c updates from Wolfram Sang:
 "Some I2C core API additions which are kind of simple but enhance error
  checking for users a lot, especially by returning errno now.

  There are wrappers to still support the old API but it will be removed
  once all users are converted"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: add device-managed version of i2c_new_dummy
  i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block

Pull cifs fixes from Steve French:
 "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
  related. Also adds SEEK_HOLE support"

* tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add support for SEEK_DATA and SEEK_HOLE
  Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
  cifs: Allocate memory for all iovs in smb2_ioctl
  cifs: Don't match port on SMBDirect transport
  cifs:smbd Use the correct DMA direction when sending data
  cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
  cifs: use the right include for signal_pending()
  smb3: trivial cleanup to smb2ops.c
  cifs: cleanup smb2ops.c and normalize strings
  smb3: display session id in debug data

Pull perf tooling updates from Ingo Molnar:
 "perf.data:

   - Streaming compression of perf ring buffer into
     PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x
     perf.data file size reduction on variety of tested workloads what
     saves storage space on larger server systems where perf.data size
     can easily reach several tens or even hundreds of GiBs, especially
     when profiling with DWARF-based stacks and tracing of context
     switches.

  perf record:

   - Improve -user-regs/intr-regs suggestions to overcome errors

  perf annotate:

   - Remove hist__account_cycles() from callback, speeding up branch
     processing (perf record -b)

  perf stat:

   - Add a 'percore' event qualifier, e.g.: -e
     cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for
     both hardware threads in a core.

     We can already do this with --per-core, but it's often useful to do
     this together with other metrics that are collected per hardware
     thread.

     I.e. now its possible to do this per-event, and have it mixed with
     other events not aggregated by core.

  arm64:

   - Map Brahma-B53 CPUID to cortex-a53 events.

   - Add Cortex-A57 and Cortex-A72 events.

  csky:

   - Add DWARF register mappings for libdw, allowing --call-graph=dwarf
     to work on the C-SKY arch.

  x86:

   - Add support for recording and printing XMM registers, available,
     for instance, on Icelake.

   - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON
     support. UPI replaced the Intel QuickPath Interconnect (QPI) in
     Xeon Skylake-SP.

  Intel PT:

   - Fix instructions sampling rate.

   - Timestamp fixes.

   - Improve exported-sql-viewer GUI, allowing, for instance, to
     copy'n'paste the trees, useful for e-mailing"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  perf stat: Support 'percore' event qualifier
  perf stat: Factor out aggregate counts printing
  perf tools: Add a 'percore' event qualifier
  perf docs: Add description for stderr
  perf intel-pt: Fix sample timestamp wrt non-taken branches
  perf intel-pt: Fix improved sample timestamp
  perf intel-pt: Fix instructions sampling rate
  perf regs x86: Add X86 specific arch__intr_reg_mask()
  perf parse-regs: Add generic support for arch__intr/user_reg_mask()
  perf parse-regs: Split parse_regs
  perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events
  perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events
  perf vendor events arm64: Remove [[:xdigit:]] wildcard
  perf jevents: Remove unused variable
  perf test zstd: Fixup verbose mode output
  perf tests: Implement Zstd comp/decomp integration test
  perf inject: Enable COMPRESSED record decompression
  perf report: Implement perf.data record decompression
  perf record: Implement -z,--compression_level[=<n>] option
  perf report: Add stub processing of compressed events for -D
  ...

Pull clocksource updates from Ingo Molnar:
 "Misc clocksource/clockevent driver updates that came in a bit late but
  are ready for v5.2"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  misc: atmel_tclib: Do not probe already used TCBs
  clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
  clocksource/drivers/tcb_clksrc: Rename the file for consistency
  clocksource/drivers/timer-atmel-pit: Rework Kconfig option
  clocksource/drivers/tcb_clksrc: Move Kconfig option
  ARM: at91: Implement clocksource selection
  clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
  clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
  ARM: at91: move SoC specific definitions to SoC folder
  clocksource/drivers/timer-milbeaut: Cleanup common register accesses
  clocksource/drivers/timer-milbeaut: Add shutdown function
  clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
  clocksource/drivers/tegra: Rework for compensation of suspend time
  clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
  clocksource/drivers/sun4i: Add a compatible for suniv
  dt-bindings: timer: Add Allwinner suniv timer

Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...

Pull EFI fix from Ingo Molnar:
 "Fix an EFI-fb regression that affects certain x86 systems"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types

Pull core fixes from Ingo Molnar:
 "This fixes a particularly thorny munmap() bug with MPX, plus fixes a
  host build environment assumption in objtool"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Allow AR to be overridden with HOSTAR
  x86/mpx, mm/core: Fix recursive munmap() corruption

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late. Most of it
  are smaller fixes and additions, some defconfig updates due to recent
  development, etc.

  Code-wise the largest portion is a series of PM updates for the at91
  platform, and those have been in linux-next a while through the at91
  tree before we picked them up"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: dts: sprd: Add clock properties for serial devices
  Opt out of scripts/get_maintainer.pl
  ARM: ixp4xx: Remove duplicated include from common.c
  soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
  arm64: tegra: Disable XUSB support on Jetson TX2
  arm64: tegra: Enable SMMU translation for PCI on Tegra186
  arm64: tegra: Fix insecure SMMU users for Tegra186
  arm64: tegra: Select ARM_GIC_PM
  amba: tegra-ahb: Mark PM functions as __maybe_unused
  ARM: dts: logicpd-som-lv: Fix MMC1 card detect
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: socfpga_defconfig: enable LTC2497
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
  ARM: at91: sama5: make ov2640 as a module
  ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
  ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
  soc/fsl/qe: Fix an error code in qe_pin_request()
  ...

Pull powerpc fixes from Michael Ellerman:
 "One fix going back to stable, for a bug on 32-bit introduced when we
  added support for THREAD_INFO_IN_TASK.

  A fix for a typo in a recent rework of our hugetlb code that leads to
  crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE.

  Two fixes for our recent rework of the address layout on 64-bit hash
  CPUs, both only triggered when userspace tries to access addresses
  outside the user or kernel address ranges.

  Finally a fix for a recently introduced double free in an error path
  in our cacheinfo code.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C.
  Harding"

* tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/cacheinfo: Remove double free
  powerpc/mm/hash: Fix get_region_id() for invalid addresses
  powerpc/mm: Drop VM_BUG_ON in get_region_id()
  powerpc/mm: Fix crashes with hugepages & 4K pages
  powerpc/32s: fix flush_hash_pages() on SMP

Pull a few more MIPS updates from Paul Burton:
 "Some SGI IP27 specific PCI rework and a batch of fixes:

   - A build fix for BMIPS5000 configurations with
     CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery.

   - A fix to report supported ISAs correctly on older Ingenic SoCs
     which incorrectly indicate MIPSr2 support in their cop0 Config
     register.

   - Some PCI modernization for SGI IP27 systems as part of ongoing work
     to support some other SGI systems.

   - A fix allowing use of appended DTB files with generic kernels.

   - DMA mask fixes for SGI IP22 & Alchemy systems"

* tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: add DMA masks for on-chip ethernet
  MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask
  generic: fix appended dtb support
  MIPS: SGI-IP27: abstract chipset irq from bridge
  MIPS: SGI-IP27: use generic PCI driver
  MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA
  MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled

Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains an assortment of RISC-V related patches that I'd like to
  target for the 5.2 merge window. Most of the patches are cleanups, but
  there are a handful of user-visible changes:

   - The nosmp and nr_cpus command-line arguments are now supported,
     which work like normal.

   - The SBI console no longer installs itself as a preferred console,
     we rely on standard mechanisms (/chosen, command-line, hueristics)
     instead.

   - sfence_remove_sfence_vma{,_asid} now pass their arguments along to
     the SBI call.

   - Modules now support BUG().

   - A missing sfence.vma during boot has been added. This bug only
     manifests during boot.

   - The arch/riscv support for SiFive's L2 cache controller has been
     merged, which should un-block the EDAC framework work.

  I've only tested this on QEMU again, as I didn't have time to get
  things running on the Unleashed. The latest master from this morning
  merges in cleanly and passes the tests as well"

* tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  riscv: fix locking violation in page fault handler
  RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  RISC-V: Add DT documentation for SiFive L2 Cache Controller
  RISC-V: Avoid using invalid intermediate translations
  riscv: Support BUG() in kernel module
  riscv: Add the support for c.ebreak check in is_valid_bugaddr()
  riscv: support trap-based WARN()
  riscv: fix sbi_remote_sfence_vma{,_asid}.
  riscv: move switch_mm to its own file
  riscv: move flush_icache_{all,mm} to cacheflush.c
  tty: Don't force RISCV SBI console as preferred console
  RISC-V: Access CSRs using CSR numbers
  RISC-V: Add interrupt related SCAUSE defines in asm/csr.h
  RISC-V: Use tabs to align macro values in asm/csr.h
  RISC-V: Fix minor checkpatch issues.
  RISC-V: Support nr_cpus command line option.
  RISC-V: Implement nosmp commandline option.
  RISC-V: Add RISC-V specific arch_match_cpu_phys_id
  riscv: vdso: drop unnecessary cc-ldoption
  riscv: call pm_power_off from machine_halt / machine_power_off
  ...