[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.

Banding occurs for these displays.

[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.

Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 91b66c47.

Forcing RMX_ASPECT as default uses the preferred/native mode's timings
for any mode the user selects and scales the image. This provides a
a consistently nicer result in the case where the selected mode's
refresh rate matches the native mode's refresh but this isn't always
the case.

For example, if the monitor is 1080p@144Hz and the preferred mode is
60Hz then even if the user selects 1080p@144Hz as their selected mode
they'll get 1080p@60Hz.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This function was renamed in a previous commit. Update the stub
function name for builds with CONFIG_HSA_AMD disabled.

Fixes: 611736d8 ("drm/amdgpu: Add KFD VRAM limit checking")
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add special avfs handling for some polaris variants.

v2: fix copy paste typo.
v3: fix asic rid check
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function 'gfx_v8_0_pre_soft_reset':
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:4950:27: warning:
 variable 'srbm_soft_reset' set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function 'gfx_v8_0_post_soft_reset':
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:5054:27: warning:
 variable 'srbm_soft_reset' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit d31a501e ("drm/amdgpu: add
pre_soft_reset ip func") and e4ae0fc3 ("drm/amdgpu: implement
gfx8 post_soft_reset")
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

driver need to reserve resource for each ctx for
some hw features. so add this limitation.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RLC will go wrong in soft_reset under sriov

Workaroound: only need to init RLC csb, and skip RLC stop, reset, start
    this is because host-driver has already done full initialization on RLC

v2: squash in build fix
Signed-off-by: NTiecehng Zhou <Tiecheng.Zhou@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The GMC/VM subsystem is causing the faults, so move the handling here as
well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

printk_ratelimit() is much better suited to limit the number of reported
VM faults.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to filter out VM faults in the GMC code.

v2: don't filter out all faults
v3: fix copy&paste typo, send all IV to the KFD, don't change message level
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows user mode to map doorbell pages into GPUVM address space.
That way GPUs can submit to user mode queues (self-dispatch).
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is used for interoperability between ROCm compute and graphics
APIs. It allows importing graphics driver BOs into the ROCm SVM
address space for zero-copy GPU access.

The API is split into two steps (query and import) to allow user mode
to manage the virtual address space allocation for the imported buffer.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

top_dev->gpu is NULL for CPUs. Avoid dereferencing it if NULL.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't want KFD processes evicting each other over VRAM usage.
Therefore prevent overcommitting VRAM among KFD applications with
a per-GPU limit. Also leave enough room for page tables on top
of the application memory usage.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Avoid including mmu_context.h in amdgpu_amdkfd.h since that may be
included in other header files that define traces. This leads to
conflicts due to traces defined in other headers included via
mmu_context.h.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY] clarify dal input parameters to pplib interface, remove
un-used parameters. dal knows exactly which parameters needed
and their effects at pplib and smu sides.

current dal sequence for dcn1_update_clock to pplib:

1.smu10_display_clock_voltage_request for dcefclk
2.smu10_display_clock_voltage_request for fclk
3.phm_store_dal_configuration_data {
  set_min_deep_sleep_dcfclk
  set_active_display_count
  store_cc6_data --- this data never be referenced

new sequence will be:

1. set_display_count  --- need add new pplib interface
2. set_min_deep_sleep_dcfclk -- new pplib interface
3. set_hard_min_dcfclk_by_freq
4. set_hard_min_fclk_by_freq

after this code refactor, smu10_display_clock_voltage_request,
phm_store_dal_configuration_data will not be needed for rv.

[HOW] step 1: add new functions at pplib interface
      step 2: add new functions at amdgpu dm and dc
Signed-off-by: Nhersen wu <hersenxs.wu@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_ring_soft_recovery would have Call-Trace,
when s_fence->parent was NULL inside amdgpu_job_timedout.
Check fence first, as drm_sched_hw_job_reset did.
Signed-off-by: NWentao Lou <Wentao.Lou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PSP ring need to be destroy before starting reinit for vf.
This patche move it from hypervisor driver into guest.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PSP only support VMR ring for SRIOV vf since v45 and all commands will
be send to VMR ring for executing.

VMR ring use C2PMSG 101 ~ 103 instead of C2PMSG 64 ~ 71.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If PSP FW is running already, driver will not load PSP FW again and skip
it. So psp fw version is not correct if reading it from FW binary file,
need to get right version from register.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to drop the extra reserve in TTM.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And drop the now superflous extra reservations.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is perfectly possible that the BO list is created before the BO is
exported. While at it clean up setting shared to one instead of true.

v2: add comment and simplify logic
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Let's support simultaneous submissions to multiple engines.

v2: rename the field to num_shared and fix up all users
v3: rebased
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Picasso && AM4 SOCKET board, we use picasso_rlc_am4.bin
For Picasso && FP5 SOCKET board, we use picasso_rlc.bin

Judgment method:
PCO AM4: revision >= 0xC8 && revision <= 0xCF
         or revision >= 0xD8 && revision <= 0xDF
otherwise is PCO FP5
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if the MC firmware supports FFC and tell the SMC so
mclk switching is handled properly.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new messages for polaris.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds two new functions to help client drivers suspend and
resume the scheduler job timeout. This can be useful in cases where the
hardware has preemption support enabled. Using this, it is possible to have
the timeout active only for the ring which is active on the ringbuffer.
This patch also makes the job_list_lock IRQ safe.
Suggested-by: NChristian Koenig <Christian.Koenig@amd.com>
Signed-off-by: NSharat Masetty <smasetty@codeaurora.org>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In cases where the scheduler instance is used as a base object of another
driver object, it's not clear if the driver can call scheduler cleanup on the
fail path. So, Set the sched->thread to NULL, so that the driver can safely
call drm_sched_fini() during cleanup.
Signed-off-by: NSharat Masetty <smasetty@codeaurora.org>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

kfree(NULL) is safe, so removes NULL check before freeing the mem.
This patch also fix the ifnullfree.cocci warnings.
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
CC: Alex Deucher <alexander.deucher@amd.com>
CC: christian.koenig@amd.com
CC: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
CC: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
CC: Lyude Paul <lyude@redhat.com>
CC: Rex Zhu <Rex.Zhu@amd.com>
CC: Jim Qu <Jim.Qu@amd.com>
CC: amd-gfx@lists.freedesktop.org
CC: dri-devel@lists.freedesktop.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In particular, we need the mmMC_VM_XGMI_LFB_CNTL register, for
determining if xGMI is enabled on VG20. This will be used by DC to
determine the correct spread spectrum adjustment for display and audio
clocks.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI does not use doorbells, move asic doorbell init later
asic check.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=108920Reviewed-by: NOak Zeng <Oak.Zeng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Adjust limits for newer polaris variants.

v2: fix polaris11 kicker (Jerry)
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update switch limit on newer polaris variants.  This may fix
flickering with high refresh rates with mclk switching enabled.
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Tracing is a useful and cheap debug functionality

[How]
This creates a new trace system amdgpu_dm, currently with
three trace events

amdgpu_dc_rreg and amdgpu_dc_wreg report the address and value
of any dc register reads and writes

amdgpu_dc_performance requires at least one of those two to be
enabled.  It counts the register reads and writes since the
last entry

v2: Don't check for NULL before kfree
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_xgmi_update_topology is called both on device registration
and reset. Fix misleading print since the device is added only once to
the hive on registration and not on reset.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use per hive wq to concurrently send reset commands to all nodes
in the hive.

v2:
Switch to system_highpri_wq after dropping dedicated queue.
Fix non XGMI code path KASAN error.
Stop  the hive reset for each node loop if there
is a reset failure on any of the nodes.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

XGMI hive has some resources allocted on device init which
needs to be deallocated when the device is unregistered.

v2: Remove creation of dedicated wq for XGMI hive reset.
v3: Use the gmc.xgmi.supported flag
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No point in use mdelay unless running from interrupt context (which we are not)
This is busy wait which will block the CPU for the entirety of the wait time.
Also, reduce wait time to 500ms as it is done in refernce code because
1s might cause PSP FW TO issues during XGMI hive reset.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We ignored the return code here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>