This will be needed by the VLV runtime PM helpers too, so factor it out.

Also add a safety check for the case where the previous force-off is
still pending, since I'm not sure if Punit can handle a new setting
while the previous one hasn't settled yet.

v2:
- unchanged
v3:
- add a note to the commit message about the safety check (Ville)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During runtime suspend there can be a last pending rps.work, so make
sure it's canceled. Note that in the runtime suspend callback we can't
get any RPS interrupts since it's called only after the GPU goes idle
and we set the minimum RPS frequency. The next possibility for an RPS
interrupt is only after getting an RPM ref (for example because of a new
GPU command) and calling the RPM resume callback.

v2:
- patch introduced in v2 of the patchset
v3:
- Change the order of canceling the rps.work and disabling interrupts to
  avoid the race between interrupt disabling and the the rps.work. Race
  spotted by Ville.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to re-init sizzling on all platforms so move it to the
platform independent runtime resume callback. The ring frequency reinit
is also needed everywhere except on VLV, but gen6_update_ring_freq()
will be a noop on VLV, so we can move this function too to platform
independent code.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is needed by the next patch moving the call out from platform
specific RPM callbacks to platform independent code.

No functional change.

v2:
- patch introduce in v2 of the patchset
v3:
- simplify platform check condition (Ville)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to disable the interrupts for all platforms, so make the helpers
for this platform independent and call them from them platform
independent runtime suspend/resume callbacks.

On HSW/BDW this will move interrupt disabling/re-enabling at the
beginning/end of runtime suspend/resume respectively, but I don't see
any reason why this would cause a problem there. In any case this seems
to be the correct thing to do even on those platforms.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV we depend on RC6 to save the GT render and media HW context
before going to the D3 state via RPM, so as a preparation for the
VLV RPM support (added in an upcoming patch) disable RPM if RC6 is
disabled.

There is probably a similar dependency on other platforms too, so for
safety require RC6 for those too. For these platforms (SNB, HSW, BDW)
this is then a possible fix.

v2:
- require RC6 for all RPM platforms, not just for VLV (Paulo, Daniel)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

At least on VLV but probably on other platforms too we depend on RC6
being enabled for RPM, so disable RPM until the delayed RC6 enabling
completes.

v2:
- explain the reason for the _noresume version of RPM get (Daniel)
- use the simpler 'if (schedule_work()) rpm_get();' instead of
  'if (!cancel_work_sync()) rpm_get(); schedule_work();'
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Getting struct_mutex around the whole intel_enable_gt_powersave()
function is not necessary, since it's only needed for the ILK path
therein.

This will make intel_enable_gt_powersave() useable on the RPM resume
path for >=GEN6 (added in an upcoming patch to reset the RPS state
during RPM resume), where we can't (and need not) get this mutex.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Based on the hardware spec, the BDW GT3 machine has two independent
BSD ring that can be used to dispatch the video commands.
So just initialize it.

V3->V4: Follow Imre's comment to do some minor updates. For example:
more comments are added to describe the semaphore between ring.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
[danvet: Fix up checkpatch error.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Based on the hardware spec, the BDW GT3 has the different configuration
with the BDW GT1/GT2. So split the BDW device info definition.
This is to do the preparation for adding the Dual BSD rings on BDW GT3 machine.

V1->V2: Follow Daniel's comment to pay attention to the stolen check for BDW
in kernel/early-quirks.c
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During module load, if we fail to initialise the rings, we abort the
load reporting EIO. However during resume, even though we report EIO as
we fail to reinitialize the ringbuffers, the resume continues and the
device is restored - albeit in a non-functional state. As we cannot
execute any commands on the GPU, it is effectively wedged, mark it so.

As we now preserve the ringbuffers across resume, this should prevent
UXA from falling into the trap of repeatedly sending invalid
batchbuffers and dropping all further rendering into /dev/null.
Reported-and-tested-by: NJiri Kosina <jkosina@suse.cz>
References: https://bugs.freedesktop.org/show_bug.cgi?id=76554Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NOscar Mateo <oscar.mateo@intel.com>
[danvet: Drop unused error, spotted by Oscar.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Unfortunately this requires a drm-wide change, and I didn't see a sane
way around that. Luckily it's fairly simple, we just need to inline
the respective get_irq implementation from either drm_pci.c or
drm_platform.c.

With that we can now also remove drm_dev_to_irq from drm_irq.c.
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The dev->struct_mutex locking in drm_irq.c only protects
dev->irq_enabled. Which isn't really much at all and only prevents
especially nasty ums userspace from concurrently installing the
interrupt handling a few times. Or at least trying.

There are tons of unlocked readers of dev->irqs_enabled in the vblank
wait code (and by extension also in the pageflip code since that uses
the same vblank timestamp engine).

Real modesetting drivers should ensure that nothing can go haywire
with a sane setup teardown sequence. So we only really need this for
the drm_control ioctl, everywhere else this will just paper over
nastiness.

Note that drm/i915 is a bit specially due to the gem+ums combination.
So there we also need to properly protect the entervt and leavevt
ioctls. But it's definitely saner to do everything in one go than to
drop the lock in-between.

Finally there's the gpu reset code in drm/i915. That one's just race
(concurrent userspace calls to for vblank waits of pageflips could
spuriously fail). So wrap it up in with a nice comment since fixing
this is more involved.

v2: Rebase and fix commit message (Thierry)
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During resume the intel hda audio driver depends on the i915 driver
reinitializing the audio power domain. Since the order of calling the
i915 resume handler wrt. that of the audio driver is not guaranteed,
move the power domain reinitialization step to the resume_early
handler. This is guaranteed to run before the resume handler of any
other driver.

The power domain initialization in turn requires us to enable the i915
pci device first, so move that part earlier too.

Accordingly disabling of the i915 pci device should happen after the
audio suspend handler ran. So move the disabling later from the i915
resume handler to the resume_late handler.

v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't
  get reordered wrt. intel_power_domains_init_hw()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
[danvet: Add cc: stable and loud comments that this is just a hack.]
[danvet: Fix "Should it be static?" sparse warning reported by Wu
Fengguang's kbuilder.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This sould be enough.

v2: BDW should also run hsw_runtime_resume (Ben).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that PC8 is part of runtime PM, the check is useless.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just because I have a SNB machine and I can easily test it.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We're adding runtime suspend support to more platforms, so organize
the code in a way that all a new platform needs to do is to add its
own gen-specific functions. Also rename the i915_ functions to intel_
to make it clear that it's the top level one, not something that just
runs on i915 platforms.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove the rest of the references to drm_i915_private_t. No functional
changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Drop hunk in i915_cmd_parser.c]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After we removed all the intermediate abstractions, we can rename
these functions to just hsw_{en,dis}able_pc8.

v2: - Rebase.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We already get runtime PM references, and PC8 is now part of runtime
PM, so this is enough.

v2: - Rebase.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently, when our driver becomes idle for i915.pc8_timeout (default:
5s) we enable PC8, so we save some power, but not everything we can.
Then, while PC8 is enabled, if we stay idle for more
autosuspend_delay_ms (default: 10s) we'll enter runtime PM and put the
graphics device in D3 state, saving even more power. The two features
are separate things with increasing levels of power savings, but if we
disable PC8 we'll never get into D3.

While from the modularity point of view it would be nice to keep these
features as separate, we have reasons to merge them:
 - We are not aware of anybody wanting a "PC8 without D3" environment.
 - If we keep both features as separate, we'll have to to test both
   PC8 and PC8+D3 code paths. We're already having a major pain to
   make QA do automated testing of just one thing, testing both paths
   will cost even more.
 - Only Haswell+ supports PC8, so if we want to add runtime PM support
   to, for example, IVB, we'll have to copy some code from the PC8
   feature to runtime PM, so merging both features as a single thing
   will make it easier for enabling runtime PM on other platforms.

This patch only does the very basic steps required to have PC8 and
runtime PM merged on a single feature: the next patches will take care
of cleaning up everything.

v2: - Rebase.
v3: - Rebase.
    - Fully remove the deprecated i915 params since Daniel doesn't
      consider them as part of the ABI.
v4: - Rebase.
    - Fix typo in the commit message.
v5: - Rebase, again.
    - Add a huge comment explaining the different forcewake usage
      (Chris, Daniel).
    - Use open-coded forcewake functions (Daniel).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we regularly defer the forcewake dance to a timer func, it is
likely to fire after we disable the device during suspend. This
generates an oops as we detect inconsistency in the hardware state. So
before suspend, we want to complete the outstanding dance and generally
sanitize the registers before handing back to the BIOS.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

BDW is no longer flagged as preliminary hw, but without
i915.preliminary_hw_support module param set the logs are filled with
WARNs about it.

Just make semaphores off the BDW per-chip default for now.

CC: Ben Widawsky <ben@bwidawsk.net>
Reported-by: NSebastien Dufour <sebastien.dufour@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For example if we get bug reports with similar error states and
suspend count is always 1, that might lead the Sherlocks to
right general direction.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just to be sure...
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This got lost when we shuffled around our internal branch and
GEN7_FEATURES macro. There were no HW changes to support FBC, so we just
need to set the flag.

v2: Don't allow FBC for any pipe but A on platforms with DDI. (Paulo)

Cc: Daisy Sun <daisy.sun@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The power domains framework is internal to the i915 driver, so pass
drm_i915_private instead of drm_device to its functions.

Also remove a dangling intel_set_power_well() declaration.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

pci_get_class(class, from) drops the refcount for 'from', so the
extra pci_dev_put we do on it will result in a use after free bug
starting with the WARN below.

Regression introduced in

commit 6a9c4b35
Author: Rui Guo <firemeteor@users.sourceforge.net>
Date:   Wed Jun 19 21:10:23 2013 +0800

    drm/i915: Fix PCH detect with multiple ISA bridges in VM

[  164.338460] WARNING: CPU: 1 PID: 2094 at include/linux/kref.h:47 klist_next+0xae/0x110()
[  164.347731] CPU: 1 PID: 2094 Comm: modprobe Tainted: G           O 3.13.0-imre+ #354
[  164.356468] Hardware name: Intel Corp. VALLEYVIEW B0 PLATFORM/NOTEBOOK, BIOS BYTICRB1.X64.0062.R70.1310112051 10/11/2013
[  164.368796] Call Trace:
[  164.371609]  [<ffffffff816a32a6>] dump_stack+0x4e/0x7a
[  164.377447]  [<ffffffff8104f75d>] warn_slowpath_common+0x7d/0xa0
[  164.384238]  [<ffffffff8104f83a>] warn_slowpath_null+0x1a/0x20
[  164.390851]  [<ffffffff8169aeae>] klist_next+0xae/0x110
[  164.396777]  [<ffffffff8130a110>] ? pci_do_find_bus+0x70/0x70
[  164.403286]  [<ffffffff813cb4a9>] bus_find_device+0x89/0xc0
[  164.409719]  [<ffffffff8130a373>] pci_get_dev_by_id+0x63/0xa0
[  164.416238]  [<ffffffff8130a4e4>] pci_get_class+0x44/0x50
[  164.422433]  [<ffffffffa034821f>] intel_dsm_detect+0x16f/0x1f0 [i915]
[  164.429801]  [<ffffffffa03482ae>] intel_register_dsm_handler+0xe/0x10 [i915]
[  164.437831]  [<ffffffffa02d30fe>] i915_driver_load+0xafe/0xf30 [i915]
[  164.445126]  [<ffffffff8158a150>] ? intel_alloc_coherent+0x110/0x110
[  164.452340]  [<ffffffffa0148c07>] drm_dev_register+0xc7/0x150 [drm]
[  164.459462]  [<ffffffffa014b23f>] drm_get_pci_dev+0x11f/0x1f0 [drm]
[  164.466554]  [<ffffffff816abb81>] ? _raw_spin_unlock_irqrestore+0x51/0x70
[  164.474287]  [<ffffffffa02cf7a6>] i915_pci_probe+0x56/0x60 [i915]
[  164.481185]  [<ffffffff8130a028>] pci_device_probe+0x78/0xf0
[  164.487603]  [<ffffffff813cd495>] driver_probe_device+0x155/0x350
[  164.494505]  [<ffffffff813cd74e>] __driver_attach+0x6e/0xa0
[  164.500826]  [<ffffffff813cd6e0>] ? __device_attach+0x50/0x50
[  164.507333]  [<ffffffff813cb2be>] bus_for_each_dev+0x6e/0xc0
[  164.513752]  [<ffffffff813ccefe>] driver_attach+0x1e/0x20
[  164.519870]  [<ffffffff813cc958>] bus_add_driver+0x138/0x260
[  164.526289]  [<ffffffffa0188000>] ? 0xffffffffa0187fff
[  164.532116]  [<ffffffff813cde78>] driver_register+0x98/0xe0
[  164.538558]  [<ffffffffa0188000>] ? 0xffffffffa0187fff
[  164.544389]  [<ffffffff813087b0>] __pci_register_driver+0x60/0x70
[  164.551336]  [<ffffffffa014b37d>] drm_pci_init+0x6d/0x120 [drm]
[  164.558040]  [<ffffffffa0188000>] ? 0xffffffffa0187fff
[  164.563928]  [<ffffffffa018806a>] i915_init+0x6a/0x6c [i915]
[  164.570363]  [<ffffffff810002da>] do_one_initcall+0xaa/0x160
[  164.576783]  [<ffffffff8103b140>] ? set_memory_nx+0x40/0x50
[  164.583100]  [<ffffffff810ce7f5>] load_module+0x1fb5/0x2550
[  164.589410]  [<ffffffff810caab0>] ? store_uevent+0x40/0x40
[  164.595628]  [<ffffffff810cee7d>] SyS_init_module+0xed/0x100
[  164.602048]  [<ffffffff816b3c52>] system_call_fastpath+0x16/0x1b

v2: simplify the loop further (Chris)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reported-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65652
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74161Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

A check of rps/rc6 state after i915_reset determined that the ring
MAX_IDLE registers were returned to their hardware defaults and that
the GEN6_PMIMR register was set to mask all interrupts. This change
restores those values to their pre-reset states by re-initializing
rps/rc6 in i915_reset. A full re-initialization was opted for versus
a targeted set of restore operations for simplicity and maintain-
ability. Note that the re-initialization is not done for Ironlake,
due to a past comment that it causes problems.

Also updated the rps initialization sequence to preserve existing
min/max values in the case of a re-init. We assume the values were
validated upon being set and do not do further range checking. The
debugfs interface for changing min/max was updated with range
checking to ensure this condition (already present in sysfs
interface).

v2: fix rps logging to output hw_max and hw_min, not rps.max_delay
    and rps.min_delay which don't strictly represent hardware limits.
    Add igt testcase to signed-off-by section.

Testcase: igt/pm_rps/reset
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.

v1: Fixed offsets for VLV, proper eDP handling

v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.

v3: Added EDP pipe comment, removed redundant offset arrays for
    MSA_MISC and DDI_FUNC_CTL.

v4: Rename patch and report object size increase.

v5: Change location of commas, add PIPE_EDP into enum pipe

v6: Insert PIPE_EDP_OFFSET into pipe offset array

v7: Set I915_MAX_PIPES back to 3, change more registers accessors
    to use the new macros, get rid of _PIPE_INC and add dev_priv
    as a parameter where required by the new macros.

Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.

Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.

I left the UMS cruft untouched.

Size differences:
   text    data     bss     dec     hex filename
 596431    4634      56  601121   92c21 i915.ko (new)
 593199    4634      56  597889   91f81 i915.ko (old)
Signed-off-by: NAntti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With 20+ module parameters, I think referring to them via a struct
improves clarity over just having a bunch of globals. While at it, move
the parameter initialization and definitions into a new file
i915_params.c to reduce clutter in i915_drv.c.

Apart from the ill-named i915_enable_rc6, i915_enable_fbc and
i915_enable_ppgtt parameters, for which we lose the "i915_" prefix
internally, the module parameters now look the same both on the kernel
command line and in code. For example, "i915.modeset".

The downsides of the change are losing static on a couple of variables
and not having the initialization and module_param_named() right next to
each other. On the other hand, all module parameters are now defined in
one place at i915_params.c. Plus you can do this to find all module
parameter references:

$ git grep "i915\." -- drivers/gpu/drm/i915

v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's unused, and nowadays specifying unknown parameters no longer
prevents modules from being loaded.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we're doing the reset handling a bit late, and we're doing
it both in the driver load code and on resume. This makes it unusable
for e.g. resetting the panel power sequence state like Paulo wants to.

Instead of adding yet another single-use callback shuffle things
around:
- Output handling code is responsible to reset/init all state on its
  own at driver load time.
- We call the reset functions much earlier, before we start using any
  of the modeset code.

Compared to Paulo's new ->resume callback the only difference in
placement is that ->reset is still called without dev->struct_mutex
held. Which is imo a feature.

v2: Rebase on top of the now merge dinq.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The opregion notification for runtime suspend is currently D1, not D3.
Signed-off-by: NKristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It ought to work ok in 3.14.  We have some fun stuff coming after that,
but all the basics are in place now and seem relatively stable.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A couple patches in the upcoming rework of semaphores will break if
semaphores are toggled by the user at various times. Since the code
cleanups there seem to be an overall win, and toggling semaphores at
runtime is not a terribly useful thing to do, simply make the module
parameter read-only.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As with processes which run on the CPU, the goal of multiple VMs is to
provide process isolation. Specific to GEN, there is also the ability to
map more objects per process (2GB each instead of 2Gb-2k total).

For the most part, all the pipes have been laid, and all we need to do
is remove asserts and actually start changing address spaces with the
context switch. Since prior to this we've converted the setting of the
page tables to a streamed version, this is quite easy.

One important thing to point out (since it'd been hotly contested) is
that with this patch, every context created will have it's own address
space (provided the HW can do it).

v2: Disable BDW on rebase

NOTE: I tried to make this commit as small as possible. I needed one
place where I could "turn everything on" and that is here. It could be
split into finer commits, but I didn't really see much point.

Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Only the two intel drivers need this and they can easily check for
working agp support in their driver ->load callbacks.

This is the only reason why agp initialization could fail, so allows
us to rip out a bit of error handling code in the next patch.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Noticed while reviewing a patch and couldn't resist the OCD.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>