Introduce the new helper function nvme_lba_to_sect() to convert a device
logical block number to a 512B sector number. Use this new helper in
obvious places, cleaning up the code.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Rename nvme_block_nr() to nvme_sect_to_lba() and use SECTOR_SHIFT
instead of its hard coded value 9. Also add a comment to decribe this
helper.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This function improves code readability and reduces code duplication.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This isn't specific to fabrics.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

We have a fundamental issue that fabric commands use the admin_q.
The reason is, that admin-connect, register reads and writes and
admin commands cannot be guaranteed ordering while we are running
controller resets.

For example, when we reset a controller we perform:
1. disable the controller
2. teardown the admin queue
3. re-establish the admin queue
4. enable the controller

In order to perform (3), we need to unquiesce the admin queue, however
we may have some admin commands that are already pending on the
quiesced admin_q and will immediate execute when we unquiesce it before
we execute (4). The host must not send admin commands to the controller
before enabling the controller.

To fix this, we have the fabric commands (admin connect and property
get/set, but not I/O queue connect) use a separate fabrics_q and make
sure to quiesce the admin_q before we disable the controller, and
unquiesce it only after we enable the controller.

This fixes the error prints from nvmet in a controller reset storm test:
kernel: nvmet: got cmd 6 while CC.EN == 0 on qid = 0
Which indicate that the host is sending an admin command when the
controller is not enabled.
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Another issue with the Apple T2 based 2018 controllers seem to be
that they blow up (and shut the machine down) if there's a tag
collision between the IO queue and the Admin queue.

My suspicion is that they use our tags for their internal tracking
and don't mix them with the queue id. They also seem to not like
when tags go beyond the IO queue depth, ie 128 tags.

This adds a quirk that marks tags 0..31 of the IO queue reserved
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Acked-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Based on reverse engineering and original patch by

Paul Pawlowski <paul@mrarm.io>

This adds support for Apple weird implementation of NVME in their
2018 or later machines. It accounts for the twice-as-big SQ entries
for the IO queues, and the fact that only interrupt vector 0 appears
to function properly.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

When native multipathing is enabled we cannot enable blktrace for
the underlying paths, so any completion is never traced.
Signed-off-by: NHannes Reinecke <hare@suse.com>
[fixed-up by Mikhail for non-multipath-build]
Signed-off-by: NMikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

All seem to call it with ctrl->cap so no need to pass it
at all.
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

nvme_enable_ctrl reads the cap register right after, so
no need to do that locally in the transport driver. Have
sqsize setting in nvme_init_identify.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.

When this situation occurs the drive doesn't resume properly from
suspend-to-idle.

LiteON has confirmed this problem and fixed in the next firmware
version.  As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.

Fixes: d916b1be ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.htmlSigned-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NCharles Hyde <charles.hyde@dellteam.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With multipath enabled, nvme_scan_work() can read from the device
(through nvme_mpath_add_disk()) and hang [1]. However, with fabrics,
once ctrl->state is set to NVME_CTRL_DELETING, the reads will hang
(see nvmf_check_ready()) and the mpath stack device make_request
will block if head->list is not empty. However, when the head->list
consistst of only DELETING/DEAD controllers, we should actually not
block, but rather fail immediately.

In addition, before we go ahead and remove the namespaces, make sure
to clear the current path and kick the requeue list so that the
request will fast fail upon requeuing.

[1]:
--
  INFO: task kworker/u4:3:166 blocked for more than 120 seconds.
        Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:3    D    0   166      2 0x80004000
  Workqueue: nvme-wq nvme_scan_work
  Call Trace:
   __schedule+0x851/0x1400
   schedule+0x99/0x210
   io_schedule+0x21/0x70
   do_read_cache_page+0xa57/0x1330
   read_cache_page+0x4a/0x70
   read_dev_sector+0xbf/0x380
   amiga_partition+0xc4/0x1230
   check_partition+0x30f/0x630
   rescan_partitions+0x19a/0x980
   __blkdev_get+0x85a/0x12f0
   blkdev_get+0x2a5/0x790
   __device_add_disk+0xe25/0x1250
   device_add_disk+0x13/0x20
   nvme_mpath_set_live+0x172/0x2b0
   nvme_update_ns_ana_state+0x130/0x180
   nvme_set_ns_ana_state+0x9a/0xb0
   nvme_parse_ana_log+0x1c3/0x4a0
   nvme_mpath_add_disk+0x157/0x290
   nvme_validate_ns+0x1017/0x1bd0
   nvme_scan_work+0x44d/0x6a0
   process_one_work+0x7d7/0x1240
   worker_thread+0x8e/0xff0
   kthread+0x2c3/0x3b0
   ret_from_fork+0x35/0x40

   INFO: task kworker/u4:1:1034 blocked for more than 120 seconds.
        Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:1    D    0  1034      2 0x80004000
  Workqueue: nvme-delete-wq nvme_delete_ctrl_work
  Call Trace:
   __schedule+0x851/0x1400
   schedule+0x99/0x210
   schedule_timeout+0x390/0x830
   wait_for_completion+0x1a7/0x310
   __flush_work+0x241/0x5d0
   flush_work+0x10/0x20
   nvme_remove_namespaces+0x85/0x3d0
   nvme_do_delete_ctrl+0xb4/0x1e0
   nvme_delete_ctrl_work+0x15/0x20
   process_one_work+0x7d7/0x1240
   worker_thread+0x8e/0xff0
   kthread+0x2c3/0x3b0
   ret_from_fork+0x35/0x40
--
Reported-by: NLogan Gunthorpe <logang@deltatee.com>
Tested-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

When the user issues a command with side effects, we will end up freezing
the namespace request queue when updating disk info (and the same for
the corresponding mpath disk node).

However, we are not freezing the mpath node request queue,
which means that mpath I/O can still come in and block on blk_queue_enter
(called from nvme_ns_head_make_request -> direct_make_request).

This is a deadlock, because blk_queue_enter will block until the inner
namespace request queue is unfroze, but that process is blocked because
the namespace revalidation is trying to update the mpath disk info
and freeze its request queue (which will never complete because
of the I/O that is blocked on blk_queue_enter).

Fix this by freezing all the subsystem nsheads request queues before
executing the passthru command. Given that these commands are infrequent
we should not worry about this temporary I/O freeze to keep things sane.

Here is the matching hang traces:
--
[ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds.
[ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42
[ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 374.487274] systemd-udevd D 0 17994 1 0x00000000
[ 374.493407] Call Trace:
[ 374.496145] __schedule+0x2ef/0x620
[ 374.500047] schedule+0x38/0xa0
[ 374.503569] blk_queue_enter+0x139/0x220
[ 374.507959] ? remove_wait_queue+0x60/0x60
[ 374.512540] direct_make_request+0x60/0x130
[ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core]
[ 374.523740] ? generic_make_request_checks+0x307/0x6f0
[ 374.529484] generic_make_request+0x10d/0x2e0
[ 374.534356] submit_bio+0x75/0x140
[ 374.538163] ? guard_bio_eod+0x32/0xe0
[ 374.542361] submit_bh_wbc+0x171/0x1b0
[ 374.546553] block_read_full_page+0x1ed/0x330
[ 374.551426] ? check_disk_change+0x70/0x70
[ 374.556008] ? scan_shadow_nodes+0x30/0x30
[ 374.560588] blkdev_readpage+0x18/0x20
[ 374.564783] do_read_cache_page+0x301/0x860
[ 374.569463] ? blkdev_writepages+0x10/0x10
[ 374.574037] ? prep_new_page+0x88/0x130
[ 374.578329] ? get_page_from_freelist+0xa2f/0x1280
[ 374.583688] ? __alloc_pages_nodemask+0x179/0x320
[ 374.588947] read_cache_page+0x12/0x20
[ 374.593142] read_dev_sector+0x2d/0xd0
[ 374.597337] read_lba+0x104/0x1f0
[ 374.601046] find_valid_gpt+0xfa/0x720
[ 374.605243] ? string_nocheck+0x58/0x70
[ 374.609534] ? find_valid_gpt+0x720/0x720
[ 374.614016] efi_partition+0x89/0x430
[ 374.618113] ? string+0x48/0x60
[ 374.621632] ? snprintf+0x49/0x70
[ 374.625339] ? find_valid_gpt+0x720/0x720
[ 374.629828] check_partition+0x116/0x210
[ 374.634214] rescan_partitions+0xb6/0x360
[ 374.638699] __blkdev_reread_part+0x64/0x70
[ 374.643377] blkdev_reread_part+0x23/0x40
[ 374.647860] blkdev_ioctl+0x48c/0x990
[ 374.651956] block_ioctl+0x41/0x50
[ 374.655766] do_vfs_ioctl+0xa7/0x600
[ 374.659766] ? locks_lock_inode_wait+0xb1/0x150
[ 374.664832] ksys_ioctl+0x67/0x90
[ 374.668539] __x64_sys_ioctl+0x1a/0x20
[ 374.672732] do_syscall_64+0x5a/0x1c0
[ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9

[ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds.
[ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42
[ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 374.760170] nvmeadm D 0 49141 36333 0x00004080
[ 374.766301] Call Trace:
[ 374.769038] __schedule+0x2ef/0x620
[ 374.772939] schedule+0x38/0xa0
[ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100
[ 374.781614] ? remove_wait_queue+0x60/0x60
[ 374.786192] blk_mq_freeze_queue+0x1a/0x20
[ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core]
[ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core]
[ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core]
[ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core]
[ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core]
[ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core]
[ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core]
[ 374.833114] do_vfs_ioctl+0xa7/0x600
[ 374.837117] ? __audit_syscall_entry+0xdd/0x130
[ 374.842184] ksys_ioctl+0x67/0x90
[ 374.845891] __x64_sys_ioctl+0x1a/0x20
[ 374.850082] do_syscall_64+0x5a/0x1c0
[ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9
--
Reported-by: NJames Puthukattukaran <james.puthukattukaran@oracle.com>
Tested-by: NJames Puthukattukaran <james.puthukattukaran@oracle.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
The driver then tries to access unallocated buffer when connecting
to a nvme target. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---

Condition check refactoring from Christoph Hellwig.
Signed-off-by: NMarta Rybczynska <marta.rybczynska@kalray.eu>
Tested-by: NJean-Baptiste Riaux <jbriaux@kalray.eu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

>From the NVMe 1.4 spec:

NSFEAT bit 4 if set to 1: indicates that the fields NPWG, NPWA, NPDG, NPDA,
and NOWS are defined for this namespace and should be used by the host for
I/O optimization;
[ ... ]
Namespace Preferred Write Granularity (NPWG): This field indicates the
smallest recommended write granularity in logical blocks for this namespace.
This is a 0's based value. The size indicated should be less than or equal
to Maximum Data Transfer Size (MDTS) that is specified in units of minimum
memory page size. The value of this field may change if the namespace is
reformatted. The size should be a multiple of Namespace Preferred Write
Alignment (NPWA). Refer to section 8.25 for how this field is utilized to
improve performance and endurance.
[ ... ]
Each Write, Write Uncorrectable, or Write Zeroes commands should address a
multiple of Namespace Preferred Write Granularity (NPWG) (refer to Figure
245) and Stream Write Size (SWS) (refer to Figure 515) logical blocks (as
expressed in the NLB field), and the SLBA field of the command should be
aligned to Namespace Preferred Write Alignment (NPWA) (refer to Figure 245)
for best performance.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This enables to inject errors into the commands submitted to the admin
queue.

It is useful to test error handling in the controller initialization.

	# echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability
	# echo 1 > /sys/kernel/debug/nvme0/fault_inject/times
	# echo 10 > /sys/kernel/debug/nvme0/fault_inject/space
	# nvme reset /dev/nvme0
	# dmesg
	...
	nvme nvme0: Could not set queue count (16385)
	nvme nvme0: IO queues not created
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currenlty fault injection support for nvme only enables to inject errors
into the commands submitted to I/O queues.

In preparation for fault injection into the admin commands, this makes
the helper functions independent of struct nvme_ns.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Future use intends to make use of both, so export these functions. And
since their implementation is identical except for the opcode, provide a
new function that implement both.

[akinobu.mita@gmail.com>: fix line over 80 characters]
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

A controller with multiple namespaces may have multiple request_queues with
their own timeout work. If a controller fails with IO outstanding to
diffent namespaces, each request queue may attempt to handle it, so
ensure there is no previously scheduled timeout work executing prior to
starting controller initialization by synchronizing with each queue.
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Qemu started out with a broken implementation of Write Zeroes written
by yours truly.  Disable Write Zeroes on qemu for now, eventually
we need to go back and make all the qemu quirks version specific,
but that is left for another time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Tested-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Since nvme_delete_ctrl_sync() is not called from any other kernel module,
unexport it.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Implement a simple round-robin I/O policy for multipathing.  Path
selection is done in two rounds, first iterating across all optimized
paths, and if that doesn't return any valid paths, iterate over all
optimized and non-optimized paths.  If no paths are found, use the
existing algorithm.  Also add a sysfs attribute 'iopolicy' to switch
between the current NUMA-aware I/O policy and the 'round-robin' I/O
policy.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.

Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().

On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.

Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.
Reported-by: NWen Xiong <wenxiong@us.ibm.com>
Tested-by: NWen Xiong <wenxiong@us.ibm.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

It is used now just to flush error recovery and reconnect work items in
the RDMA and TCP transports, which can simply be moved to the
corresponding teardown routines.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If a device provides an NQN it is expected to be globally unique.
Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did
not satisfy this requirement.  In these circumstances if a system has >1
affected device then only one device is enabled.  If this quirk is enabled
then the device supplied subnqn is ignored and we fallback to generating
one as if the field was empty.  In this case we also suppress the version
check so we don't print a warning when the quirk is enabled.
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJames Dingwall <james@dingwall.me.uk>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Pass poll bool to indicate that we need it to poll. This prepares us for
polling support in nvmf since connect is an I/O that will be queued
and has to be polled in order to complete. If poll is passed,
we call nvme_execute_rq_polled which sends the requests and polls
for its completion.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in nvme. If we fail allocating the special page, we
return busy, and it'll get retried. But since ordering is honored for
dispatch requests, we can keep retrying this same IO and failing. Behind
that IO could be requests that want to free memory, but they never get
the chance.

Allocate a fixed discard page per controller for a safe fallback, and use
that if the initial allocation fails.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add __exit annotation to cleanup helper which is only
called once in the module.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currently the geometry of an OCSSD is enumerated using a two step
approach:

First, nvm_register is called, the OCSSD identify command is issued,
and second the geometry sos and csecs values are read either from the
OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data
structure if it is a 2.0 device.

This patch recombines it into a single step, such that nvm_register can
use the csecs and sos fields independent of which version is used. This
enables one to dynamically size the lightnvm subsystem dma pool.
Reviewed-by: NIgor Konopko <igor.j.konopko@intel.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A controller may have an internal state that is not able to successfully
process commands for a short duration. In such states, an immediate
command requeue is expected to fail. The driver may exceed its max
retry count, which permanently ends the command in failure when the same
command would succeed after waiting for the controller to be ready.

NVMe ratified TP 4033 provides a delay hint in the completion status
code for failed commands. Implement the retry delay based on the command
completion status and the controller's requested delay.

Note that requeued commands are handled per request_queue, not per
individual request. If multiple commands fail, the controller should
consistently report the desired delay time for retryable commands in
all CQEs, otherwise the requeue list may be kicked too soon.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the controller supports traffic based keep alive, we restart the keep
alive timer if any admin or io commands was completed during the kato
period.  This prevents a possible starvation of keep alive commands in
the presence of heavy traffic as in such case, we already have a health
indication from the host perspective.

Only set a comp_seen indicator in case the controller supports keep
alive to minimize the overhead for pci controllers.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We get the controller attributes in identify, cache them as we'll need
them for traffic based keep alive support.
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of directly poking into the struct device add a new numa_node
field to struct nvme_ctrl.  This allows fabrics drivers where ctrl->dev
is a virtual device to support NUMA affinity as well.

Also expose the field as a sysfs attribute, and populate it for the
RDMA and FC transports.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might
show up as invididual devices and cause problems, warn about it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

We have this functionality in sbitmap, but we don't export it in
blk-mq for users of the tags busy iteration. This can be useful
for stopping the iteration, if the caller doesn't need to find
more requests.
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For P2P requests, we must use the pci_p2pmem_map_sg() function instead of
the dma_map_sg functions.

With that, we can then indicate PCI_P2P support in the request queue.  For
this, we create an NVME_F_PCI_P2P flag which tells the core to set
QUEUE_FLAG_PCI_P2P in the request queue.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>

Make current_path an array with an entry for every possible node, and
cache the best path on a per-node basis.  Take the node distance into
account when selecting it.  This is primarily useful for dual-ported PCIe
devices which are connected to PCIe root ports on different sockets.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>