This patch adds new firmware dump template entries for ISP27XX firmware
dump.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes following checkpatch ERROR

 ERROR: space prohibited before that ',' (ctx:WxW)

No change is functionality due to this patch.
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Current code hard codes marker request to use request and response queue
0. This patch make use of the qpair as the path to access the
request/response queues.  It allows marker to be place on any hardware
queue.
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Prevent user from sending commands through sysfs while FW is not running or
reset is in progress.
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds sysfs node

1. There is a new sysfs node port_speed
2. The possible values are 2(Auto neg), 8, 16, 32
3. A value outside of the above defaults to Auto neg
4. Any update to the setting causes a link toggle
5. This feature is currently only for ISP27xx
Signed-off-by: NAnil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add check to allow 1 discovery command per session to be sent.
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For FC-NVMe, if the fw_started flag is not set or fcport is deleted, then
do not send Abort command
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes driver unload issue when FC-NVMe devices are configured.
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add Support for First Burst for FC-NVMe protocol. This feature requires
First Burst support in the firmware.
Signed-off-by: NDarren Trapp <darren.trapp@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes LUN discovery when loop ID is not yet assigned by the
firmware during driver load/sg_reset operations. Driver will now search for
new loop id before retrying login.

Fixes: 48acad09 ("scsi: qla2xxx: Fix N2N link re-connect")
Cc: stable@vger.kernel.org #4.19
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The null check on pointer sess and the subsequent call is redundant as sess
is null on all the the paths that lead to the out_term2 label.  Hence the
null check and the call can be removed.  Also remove the redundant setting
of sess to NULL as this is not required now.

Detected by CoverityScan, CID#1420663 ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When sending an srb with qla2x00_start_sp, the sp can complete and be freed
by the time we log the debug message saying we sent it. This can cause a
panic if sp gets reused quickly or when running a kernel that poisons freed
memory.

This was partially fixed by (not every case was addressed):

Commit 9fe278f4 ("scsi: qla2xxx: Move log messages before issuing
command to firmware")
Signed-off-by: NBill Kuzeja <william.kuzeja@stratus.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_cpu_affinity_check':
drivers/scsi/lpfc/lpfc_init.c:10599:19: warning:
 variable 'phys_id' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit 6a828b0f ("scsi: lpfc:
Support non-uniform allocation of MSIX vectors to hardware queues")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add HI3670 SoC UFS driver support by extending the common ufs-hisi
driver. One major difference between HI3660 ad HI3670 SoCs interms of UFS
is the PHY. HI3670 has a 10nm variant PHY and hence this parameter is used
to distinguish the configuration.
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: NWei Li <liwei213@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add devicetree binding for HI3670 UFS controller. HI3760 SoC is very
similar to HI3660 SoC with almost same IPs. Only major difference in terms
of UFS is the PHY. HI3670 has 10nm PHY. But since the original driver
(HI3660 UFS) cannot make HI3670 UFS functional, a separate compatible
is added for HI3670 without any fallback.
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NWei Li <liwei213@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are a handful of statements that are indented incorrectly. Fix these.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

As prom_name is not used for anything else, remove it.

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit b2bff6ce ("[SCSI] sd: Quiesce mode sense error messages")
added the macro sd_first_printk(). The macro takes "sdsk" as argument
but dereferences "sdkp". This hasn't caused any real issues since all
callers of sd_first_printk() have an sdkp. But fix the typo.

[mkp: Turned this into a real patch and tweaked commit description]
Signed-off-by: NDietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add padding to make the structure variables in MR_HOST_DEVICE_LIST_ENTRY
64-bit aligned.  Also, add reserved fields to MR_HOST_DEVICE_LIST for
future firmware usage.
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This should return -ENOMEM if kcalloc() fails, but it accidentally
returns success instead.

Fixes: 6a828b0f ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

poitner -> pointer.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: NPedro Sousa <pedrom.sousa@synopsys.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Teach scsi_debug to honor SWP in the Control Mode Page and report the
resulting WP state in the Device-Specific Parameter field.

In check_device_access_params() verify that commands that will write
the medium are permitted to do so.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>

This patch does not change any functionality but reduces the size of
struct scsi_cmnd.

Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since commit 26e85fcd ("[SCSI] sd: Permit merged discard requests";
kernel v3.10) sd_done() sets the residual not only for failed special
requests but also for special requests that succeeded. Hence remove the
code from functions called by sd_init_command() that sets the residual.
This patch does not change any functionality.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality.

Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NOliver Neukum <oneukum@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality.

Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality.

Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A recent commit removed an element from opcode_info_arr[] but did not
modify opcode_ind_arr[] nor was SDEB_I_XDWRITEREAD removed. Remove
SDEB_I_XDWRITEREAD and bring the two arrays again in sync. This patch
avoids that the following is reported:

BUG: KASAN: null-ptr-deref in scsi_debug_queuecommand+0x60f/0xc90 [scsi_debug]
Read of size 1 at addr 0000000000000001 by task iscsi-test-cu/683
CPU: 3 PID: 683 Comm: iscsi-test-cu Not tainted 5.0.0-rc5-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 dump_stack+0x86/0xca
 kasan_report.cold.3+0x5/0x3e
 __asan_load1+0x47/0x50
 scsi_debug_queuecommand+0x60f/0xc90 [scsi_debug]
 scsi_queue_rq+0xc17/0x12e0
 blk_mq_dispatch_rq_list+0x5fc/0xb10
 blk_mq_sched_dispatch_requests+0x2f7/0x300
 __blk_mq_run_hw_queue+0xd6/0x180
 __blk_mq_delay_run_hw_queue+0x25c/0x290
 blk_mq_run_hw_queue+0x119/0x1b0
 blk_mq_sched_insert_request+0x274/0x350
 blk_execute_rq_nowait+0x78/0x90
 blk_execute_rq+0xcc/0x140
 sg_io+0x30f/0x700
 scsi_cmd_ioctl+0x4d4/0x540
 scsi_cmd_blk_ioctl+0x7b/0x8b
 sd_ioctl+0xba/0x150
 blkdev_ioctl+0x6e1/0xea0
 block_ioctl+0x79/0x90
 do_vfs_ioctl+0x12b/0x9b0
 ksys_ioctl+0x41/0x80
 __x64_sys_ioctl+0x43/0x50
 do_syscall_64+0x71/0x210
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Christoph Hellwig <hch@lst.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Fixes: ae3d56d8 ("scsi: remove bidirectional command support")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Do some very minor tidy-up, for things like needlessly initing variable and
not leaving whitespace before quote endings.

Originally-from: Xiang Chen <chenxiang66@hisilicon.com>
Originally-from: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For auto-control irq affinity mode, choose the dq to deliver IO according
to the current CPU.

Then it decreases the performance regression that fio and CQ interrupts are
processed on different node.

For user control irq affinity mode, keep it as before.

To realize it, also need to distinguish the usage of dq lock and sas_dev
lock.

We mark as experimental due to ongoing discussion on managed MSI IRQ
during hotplug:
https://marc.info/?l=linux-scsi&m=154876335707751&w=2

We're almost at the point where we can expose multiple queues to the upper
layer for SCSI MQ, but we need to sort out the per-HBA tags performance
issue.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

To support queue mapped to a CPU, it needs to be ensured that issuing an
internal abort is safe, in that it is guaranteed that an internal abort is
processed for a single IO or a device after all the relevant command(s)
which it is attempting to abort have been processed by the controller.

Currently we only deliver commands for any device on a single queue to
solve this problem, as we know that commands issued on the same queue will
be processed in order, and we will not have a scenario where the internal
abort is racing against a command(s) which it is trying to abort.

To enqueue commands on queue mapped to a CPU, choosing a queue for an
command is based on the associated queue for the current CPU, so this is
not safe for internal abort since it would definitely not be guaranteed
that commands for the command devices are issued on the same queue.

To solve this issue, we take a bludgeoning approach, and issue a separate
internal abort on any queue(s) relevant to the command or device, in that
we will be guaranteed that at least one of these internal aborts will be
received last in the controller.

So, for aborting a single command, we can just force the internal abort to
be issued on the same queue as the command which we are trying to abort.

For aborting all commands associated with a device, we issue a separate
internal abort on all relevant queues. Issuing multiple internal aborts in
this fashion would have not side affect.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If sending IOs to many disks from single queue, it is possible that the
queue may be full. To avoid the situation, change queue depth from 512 to
4096 which is the max number of IOs for v3 hw.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add an interface to manually trigger a debugfs dump.
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds support for DIX to v3 hw driver.

For this, we build upon support for DIF, most significantly is adding new
DMA map and unmap paths.

Some pre-existing macro precedence issues are also tidied. They were
detected by checkpatch --strict.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If you look at the bindings for the UFS Host Controller it says:

- compatible: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
              also list one or more of the following:
                 "qcom,msm8994-ufshc"
                 "qcom,msm8996-ufshc"
                 "qcom,ufshc"

My reading of that is that it's fine to just have either of these:
1. "qcom,msm8996-ufshc", "jedec,ufs-2.0"
2. "qcom,ufshc", "jedec,ufs-2.0"

As far as I can tell neither of the above is actually a good idea.

For #1 it turns out that the driver currently only keys off the
compatible string "qcom,ufshc" so it won't actually probe.

For #2 the driver won't probe but it's not a good idea to keep the SoC
name out of the compatible string.

Let's update the compatible string to make it really explicit.  We'll
include a nod to the existing driver and the old binding and say that
we should always include the "qcom,ufshc" string in addition to the
SoC compatible string.

While we're at it we'll also include another example SoC known to have
UFS: sdm845.

Fixes: 47555a5c ("scsi: ufs: make the UFS variant a platform device")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns several times in the scsi subsystem (trimmed for brevity):

drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to
switch condition type (2147762695 to 18446744071562347015) [-Wswitch]
        case CCISS_GETBUSTYPES:
             ^
drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to
switch condition type (2147762694 to 18446744071562347014) [-Wswitch]
        case CCISS_GETHEARTBEAT:
             ^

The root cause is that the _IOC macro can generate really large numbers,
which don't fit into type 'int', which is used for the cmd parameter in
the ioctls in scsi_host_template. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful. However, looking at
the rest of the kernel tree, all ioctls use an 'unsigned int' for the
cmd parameter, which will fit all of the _IOC values in the scsi/ata
subsystems.

Make that change because none of the ioctls expect a negative value for
any command, it brings the ioctls inline with the reset of the kernel,
and it removes ambiguity, which is never good when dealing with compilers.

Link: https://github.com/ClangBuiltLinux/linux/issues/85
Link: https://github.com/ClangBuiltLinux/linux/issues/154
Link: https://github.com/ClangBuiltLinux/linux/issues/157Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NBradley Grove <bgrove@attotech.com>
Acked-by: NDon Brace <don.brace@microsemi.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update lpfc version to 12.2.0.0
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For files modified as part of 12.2.0.0 patches, update copyright to 2019
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Various null pointer dereference and general protection fault panics occur
when there is a link bounce under load. There are a large number of "error"
message 6413 indicating "bad release".

The issues resolve to list corruptions due to missing or inconsistent lock
protection. Lockups are due to nested locks in the unsolicited abort
path. The unsolicited abort path calls the wrong abort processing
routine. There was also duplicate context release while aborts were still
active in the hardware.

Removed duplicate locks and added lock protection around list item
removal. Commonized lock handling around the abort processing routines.
Prevent context release while still in ABTS list.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>