3f6da390 ("perf: Rework and fix the arch CPU-hotplug hooks") introduced
this breakage. sh_pmu_setup() is missing an opening curly brace.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100913191729.GA6440@console-pimps.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also fix a few compile errors due to undefined and duplicated
variables.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284269844-23251-1-git-send-email-mcree@orcon.net.nz>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In case you boot with the watchdog disabled, i.e., nowatchdog, then,
if you try to disable it via /proc/sys/kernel/watchdog, you get
a kernel crash. The reason is that you are trying to cancel a hrtimer
which has never been initialized.

This patch fixes this by skipping execution of
watchdog_disable_all_cpus() when the watchdog is marked
disabled from boot.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4c8f7a23.cae9d80a.2c11.0bb4@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core

The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were
used as commands to ftrace_run_update_code(). But these commands
were used by the old nasty ftrace daemon that has long been slain.

This is a clean up patch to remove the references to these enums
and simplify the code a little.
Reported-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the function graph tracer funcgraph-irq option is zero, disable
tracing in IRQs. This makes the option have two effects.

1) When reading the trace file, do not display the functions that
   happen in interrupt context (when detected)

2) [*new*] When recording a trace, skip those that are detected
   to be in interrupt by the 'in_irq()' function

Note, in_irq() is updated at irq_enter() and irq_exit(). There are
still functions that are recorded by the function graph tracer that
is in interrupt context but outside the irq_enter/exit() routines.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It's handy to be able to disable the irq related output
and not to have to jump over each irq related code, when
you have no interrest in it.

The option is by default enabled, so there's no change to
current behaviour. It affects only the final output, so all
the irq related data stay in the ring buffer.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100907145344.GC1912@jolsa.brq.redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If we do:

 # cd /sys/kernel/debug
 # echo 'do_IRQ:traceon schedule:traceon sys_write:traceon' > \
    set_ftrace_filter
 # cat set_ftrace_filter

We get the following output:

 #### all functions enabled ####
 sys_write:traceon:unlimited
 schedule:traceon:unlimited
 do_IRQ:traceon:unlimited

This outputs two lists. One is the fact that all functions are
currently enabled for function tracing, the other has three probed
functions, which happen to have 'traceon' as their commands.

Currently, when reading the first list (functions enabled) the
seq_file code will receive a "NULL" from the t_next() function
causing it to exit early. This makes "read()" from userspace stop
reading the code at this boarder. Although read is allowed to do this,
some (broken) applications might consider this an end of file and
stop early.

This patch adds the start of the second list to t_next() when it
finishes the first list. It is a simple change and gives the
set_ftrace_filter file nicer reading ability.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch keeps track of the index within the elements of
set_ftrace_filter and if the position goes backwards, it nicely
resets and starts from the beginning again.

This allows for lseek and pread to work properly now.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The set_ftrace_filter uses seq_file and reads from two lists. The
pointer returned by t_next() can either be of type struct dyn_ftrace
or struct ftrace_func_probe. If there is a bug (there was one)
the wrong pointer may be used and the reference can cause an oops.

This patch makes t_next() and friends only return the iterator structure
which now has a pointer of type struct dyn_ftrace and struct
ftrace_func_probe. The t_show() can now test if the pointer is NULL or
not and if the pointer exists, it is guaranteed to be of the correct type.

Now if there's a bug, only wrong data will be shown but not an oops.

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After the filtered functions are read, the probed functions are read
from the hash in set_ftrace_filter. When the hashed probed functions
are read, the *pos passed in is reset. Instead of modifying the pos
given to the read function, just record the pos where the filtered
functions ended and subtract from that.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

* 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Improve latencies under load by decreasing minimum scheduling granularity

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k,m68knommu: Wire up fanotify_init, fanotify_mark, and prlimit64

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix siglock

Quoth Tony:

 "I committed the fix for this last week prior to your -rc4 announcement
  reminding us to give proper "Reported-by:" credit.  This one should have
  had:
Reported-by: NTony Ernst <tee@sgi.com>

  and also
Much-useful-investigation-and-tracing-by: NHedi Berriche <hedi@sgi.com>
  Much-useful-investigation-and-tracing-by: Petr Tesarik <ptesarik@novell.com>"

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: prevent possible memory corruption in cifs_demultiplex_thread
  cifs: eliminate some more premature cifsd exits
  cifs: prevent cifsd from exiting prematurely
  [CIFS] ntlmv2/ntlmssp remove-unused-function CalcNTLMv2_partial_mac_key
  cifs: eliminate redundant xdev check in cifs_rename
  Revert "[CIFS] Fix ntlmv2 auth with ntlmssp"
  Revert "missing changes during ntlmv2/ntlmssp auth and sign"
  Revert "Eliminate sparse warning - bad constant expression"
  Revert "[CIFS] Eliminate unused variable warning"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Don't use dotl version of mknod for dotu inode operations
  fs/9p: Use the correct dentry operations
  9p: Check for NULL fid in v9fs_dir_release()
  fs/9p: Fix error handling in v9fs_get_sb
  fs/9p, net/9p: memory leak fixes

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  dquot: do full inode dirty in allocating space

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/pl022: move probe call to subsys_initcall()
  powerpc/5200: mpc52xx_uart.c: Add of_node_put to avoid memory leak
  spi/pl022: fix APB pclk power regression on U300
  spi/spi_s3c64xx: Warn if PIO transfers time out
  spi/s3c64xx: Fix incorrect reuse of 'val' local variable.
  spi/s3c64xx: Fix compilation warning
  spi/dw_spi: clean the cs_control code
  spi/dw_spi: Allow interrupt sharing
  spi/spi_s3c64xx: Increase dead reckoning time in wait_for_xfer()
  spi/spi_s3c64xx: Move to subsys_initcall()
  spi: free children in spi_unregister_master, not siblings
  gpiolib: Add 'struct gpio_chip' forward declaration for !GPIOLIB case
  of: Fix missing includes - ll_temac
  spi/spi_s3c64xx: Staticise non-exported functions
  spi/spi_s3c64xx: Make probe more robust against missing board config

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NGreg Ungerer <gerg@uclinux.org>

Mathieu reported bad latencies with make -j10 kind of kbuild
workloads - which is mostly caused by us scheduling with a
too coarse granularity.

Reduce the minimum granularity some more, to make sure we
can meet the latency target.

I got the following results (make -j10 kbuild load, average of 3
runs):

 vanilla:

  maximum latency: 38278.9 µs
  average latency:  7730.1 µs

 patched:

  maximum latency: 22702.1 µs
  average latency:  6684.8 µs

Mathieu also measured it:

|
| * wakeup-latency.c (SIGEV_THREAD) with make -j10
|
| - Mainline 2.6.35.2 kernel
|
| maximum latency: 45762.1 µs
| average latency: 7348.6 µs
|
| - With only Peter's smaller min_gran (shown below):
|
| maximum latency: 29100.6 µs
| average latency: 6684.1 µs
|
Reported-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <AANLkTi=8m4g01wZPacySoF7U0PevTNVgJoZZrHiUD-pN@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They are useless and take away precious columns and lines, so stop using
windows.

One more step in removing newt code, that after all is not being useful
at all for the coalescing TUI model in perf.
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100822082003.GB7365@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With the context rework stuff we can actually end up freeing an event
before it gets attached to a context.
Reported-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Simplify things and simply synchronize against two RCU variants for
PMU unregister -- we don't care about performance, its module unload
if anything.
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We should not use dotlversion for the dotu inode operations
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

We should use the cached dentry operation only if caching mode is enabled
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

NULL fid should be handled in cases where we endup calling v9fs_dir_release()
before even we instantiate the fid in filp.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This was introduced by 7cadb63d58a932041afa3f957d5cbb6ce69dcee5
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Four memory leak fixes in the 9P code.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Fix a bug introduced with commit de725dec and the change in the
meaning of the return value of intel_pmu_handle_irq(). With the
current code, when you are using the BTS, you get 'dazed by NMI'
each time the BTS buffer fills up.

BTS does interrupt on the PMU vector, thus NMI. You need to take
this into account in the return value of the function.

This version fixes initial patch which was missing changes to
perf_event_intel_ds.c.
Signed-off-by: NStephane Eranian <eranian@google.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@gmail.com
Cc: robert.richter@amd.com
LKML-Reference: <4c8a1686.aae9d80a.5aa4.5e35@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix docbook templates that reference files that do not contain the
expected kernel-doc notation.

Fixes these warnings:

  Warning(arch/x86/include/asm/unaligned.h): no structured comments found
  Warning(lib/vsprintf.c): no structured comments found

These cause errors in the generated html output, like below, so drop
these lines.

  Name
  arch/x86/include/asm/unaligned.h - Document generation inconsistency
  Oops
  Warning
  The template for this document tried to insert the structured comment from the file arch/x86/include/asm/unaligned.h at this point, but none was found. This dummy section is inserted to allow generation to continue.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When you don't use !E or !I but only !F, then it's very easy to miss
including some functions, structs etc.  in documentation.  To help
finding which ones were missed, allow printing out the unused ones as
warnings.

For example, using this on mac80211 yields a lot of warnings like this:

  Warning: didn't use docs for DOC: mac80211 workqueue
  Warning: didn't use docs for ieee80211_max_queues
  Warning: didn't use docs for ieee80211_bss_change
  Warning: didn't use docs for ieee80211_bss_conf

when generating the documentation for it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are valid attributes that could have upper case letters, but we
still want to remove, like for example
	__attribute__((aligned(NETDEV_ALIGN)))
as encountered in the wireless code.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Avoid hitting OOM during preallocation of memory
  PM QoS: Correct pr_debug() misuse and improve parameter checks
  PM: Prevent waiting forever on asynchronous resume after failing suspend

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix use-after-free in scsi_init_io()
  [SCSI] sd: fix medium-removal bug
  [SCSI] qla2xxx: Update version number to 8.03.04-k0.
  [SCSI] qla2xxx: Check for empty slot in request queue before posting Command type 6 request.
  [SCSI] qla2xxx: Cover UNDERRUN case where SCSI status is set.
  [SCSI] qla2xxx: Correctly set fw hung and complete only waiting mbx.
  [SCSI] qla2xxx: Reset seconds_since_last_heartbeat correctly.
  [SCSI] qla2xxx: make rport deletions explicit during vport removal
  [SCSI] qla2xxx: Fix vport delete issues
  [SCSI] sd, sym53c8xx: Remove warnings after vsprintf %pV introducation.
  [SCSI] Fix warning: zero-length gnu_printf format string
  [SCSI] hpsa: disable doorbell reset on reset_devices
  [SCSI] be2iscsi: Fix for Login failure
  [SCSI] fix bio.bi_rw handling

There is a problem in hibernate_preallocate_memory() that it calls
preallocate_image_memory() with an argument that may be greater than
the total number of available non-highmem memory pages.  If that's
the case, the OOM condition is guaranteed to trigger, which in turn
can cause significant slowdown to occur during hibernation.

To avoid that, make preallocate_image_memory() adjust its argument
before calling preallocate_image_pages(), so that the total number of
saveable non-highem pages left is not less than the minimum size of
a hibernation image.  Change hibernate_preallocate_memory() to try to
allocate from highmem if the number of pages allocated by
preallocate_image_memory() is too low.

Modify free_unnecessary_pages() to take all possible memory
allocation patterns into account.
Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NM. Vefa Bicakci <bicave@superonline.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
  ipheth: remove incorrect devtype to WWAN
  MAINTAINERS: Add CAIF
  sctp: fix test for end of loop
  KS8851: Correct RX packet allocation
  udp: add rehash on connect()
  net: blackhole route should always be recalculated
  ipv4: Suppress lockdep-RCU false positive in FIB trie (3)
  niu: Fix kernel buffer overflow for ETHTOOL_GRXCLSRLALL
  ipvs: fix active FTP
  gro: Re-fix different skb headrooms
  via-velocity: Turn scatter-gather support back off.
  ipv4: Fix reverse path filtering with multipath routing.
  UNIX: Do not loop forever at unix_autobind().
  PATCH: b44 Handle RX FIFO overflow better (simplified)
  irda: off by one
  3c59x: Fix deadlock in vortex_error()
  netfilter: discard overlapping IPv6 fragment
  ipv6: discard overlapping fragment
  net: fix tx queue selection for bridged devices implementing select_queue
  bonding: Fix jiffies overflow problems (again)
  ...

Fix up trivial conflicts due to the same cgroup API thinko fix going
through both Andrew and the networking tree.  However, there were small
differences between the two, with Andrew's version generally being the
nicer one, and the one I merged first. So pick that one.

Conflicts in: include/linux/cgroup.h and kernel/cgroup.c

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Kill all BKL usage.

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tsc: Fix a preemption leak in restore_sched_clock_state()
  sched: Move sched_avg_update() to update_cpu_load()

Doh, a real life genuine preemption leak..

This caused a suspend failure.

Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nico Schottelius <nico-linux-20100709@schottelius.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Pritz <flo@xssn.at>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org> # Greg, please apply after: cd7240c0 ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from")
sleep states
LKML-Reference: <1284150773.402.122.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>