- 28 1月, 2009 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1199) changes the initial wakeup settings for PCI USB host controllers. The controllers are marked as capable of waking the system, but wakeup is not enabled by default. It turns out that enabling wakeup for USB host controllers has a lot of bad consequences. As the simplest example, if a USB mouse or keyboard is unplugged immediately after the computer is put to sleep, the unplug will cause the system to wake back up again! We are better off marking them as wakeup-capable and leaving wakeup disabled. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-by: NRafael J. Wysocki <rjw@sisk.pl> CC: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 1月, 2009 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1193b) enables wakeup during initialization for all PCI host controllers, and it removes some code (and comments!) that are no longer needed now that the PCI core automatically initializes wakeup settings for all new devices. The idea is that the bus should initialize wakeup, and the bus glue or controller driver should enable it. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 10月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
Some Toshiba Mobile I/O chips have OHCI controller built in. E.g. the tc6393xb chip found in several Toshiba e-Series PDAs and in Sharp Zaurus SL-6000 PDA. This adds platform glue to support OHCI function of the chip. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NIan Molton <spyro@f2s.com> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 10月, 2008 2 次提交
-
-
由 Alan Stern 提交于
This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 8月, 2008 2 次提交
-
-
由 Libin Yang 提交于
On some AMD 700 series southbridges, ISO OUT transfers (such as audio playback through speakers) on the USB OHCI controller may be corrupted when an A-Link express power saving feature is active. PLL power down mode in conjunction with link power management feature L1 being enabled is the bad combination ... this patch prevents them from being enabled when ISO transfers are pending. Signed-off-by: NCrane Cai <crane.cai@amd.com> Signed-off-by: NLibin Yang <libin.yang@amd.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 7月, 2008 1 次提交
-
-
由 Eric Miao 提交于
As RMK pointed out, considering the fact that the _only_ platform with a PXA and SA1111 is the Lubbock, and that SA1111 DMA doesn't work there, (i.e. the SA1111 OHCI doesn't work there) the SA1111 OHCI driver should really be made SA11x0 specific. Signed-off-by: NEric Miao <eric.miao@marvell.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 7月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
If the SM501 and another platform driver, such as the SM501 then we end up defining PLATFORM_DRIVER twice. This patch seperated the SM501 onto a seperate define of SM501_OHCI_DRIVER so that it can be selected without overwriting the original definition. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 4月, 2008 1 次提交
-
-
由 Richard Kennedy 提交于
Code inspection discovered in 2 places timers were being incorrectly setup using round_jiffies_relative(HZ). The timer would then fire at time (0 <= T < HZ). Fix them to use round_jiffies(jiffies + HZ); Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 02 2月, 2008 4 次提交
-
-
由 Magnus Damm 提交于
usb: ohci-sm501 driver V2 This patch adds sm501 ohci support. It's all very straightforward with the exception of dma_declare_coherent_memory() and HCD_LOCAL_MEM. Together they are used to ensure that usb data is allocated using dma_alloc_coherent(), and that only valid dma memory is used to allocate from. This driver is a platform device, and the mfd driver sm501.c is already creating one usb host controller instance per sm501. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
add support for SuperH OHCI. supported CPU are: - SH7720 - SH7721 - SH7763 Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
The OHCI driver's IRQ handler, while processing a WDH interrupt, masks and unmasks it. I believe this is both broken (the write may still be posted during the donelist processing it's trying to safeguard) and useless as this IRQ may not be reissued until it's acked (unless this legacy code is an uncommented workaround for some chip erratum). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tony Jones 提交于
We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: NTony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 1月, 2008 1 次提交
-
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2007 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The OHCI IRQ handler has an optimisation that avoids reading some chip registers when the controller reports that the interrupt was triggered *only* because completed requests were written into the controller's "done list" and handed to the host. This mechanism can't be used on some controllers. Among others, it fails for the SA1111 and the AMCC 440EP PowerPC processor. This patch removes the optimisation and makes the code clearer. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 10月, 2007 1 次提交
-
-
由 David Brownell 提交于
Remove various newly-introduced compiler warnings for OHCI. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 10月, 2007 4 次提交
-
-
由 Michael Buesch 提交于
This adds SSB bus glue for the USB OHCI HCD. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as975) reorganizes the way ohci-hcd sets urb->status. It now keeps the information in a local variable until the last moment. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Nuss 提交于
The ZF Micro OHCI controller exhibits unexpected behavior that seems to be related to high load. Under certain conditions, the controller will complete a TD, remove it from the endpoint's queue, and fail to add it to the donelist. This causes the endpoint to appear to stop responding. Worse, if the device is removed while in that state, OHCI will hang while waiting for the orphaned TD to complete. The situation is not recoverable without rebooting. This fix enhances the scope of the existing OHCI_QUIRK_ZFMICRO flag: 1. A watchdog routine periodically scans the OHCI structures to check for orphaned TDs. In these cases the TD is taken back from the controller and completed normally. 2. If a device is removed while the endpoint is hung but before the watchdog catches the situation, any outstanding TDs are taken back from the controller in the 'sanitize' phase. The ohci-hcd driver used to print "INTR_SF lossage" in this situation; this changes it to the universally accurate "ED unlink timeout". Other instances of this message presumably have different root causes. Both this Compaq quirk and a NEC quirk are now properly compiled out for non-PCI builds of this driver. Signed-off-by: NMike Nuss <mike@terascala.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 7月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Acked-by: NPierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NGreg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 7月, 2007 3 次提交
-
-
由 Geoff Levand 提交于
USB HCD glue updates to reflect the new PS3 unifed device support. - Fixed remove() routine. - Added shutdown() routine. - Added request_mem_region() call. - Fixed MODULE_ALIAS(). - Made a proper fix for the hack done to support muti-platform in commit 48fda451. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Hanselmann 提交于
This patch fixes a silicon bug in some NEC OHCI chips. The bug appears at random times and is very, very difficult to reproduce. Without the following patch, Linux would shut the chip and its associated devices down. In Apple PowerBooks this leads to an unusable keyboard and mouse (SSH still working). The idea of restarting the chip is taken from public Darwin code. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss of VBUS power during suspend. In order for the USB-persist facility to work correctly, it is necessary for low- and full-speed devices attached to a high-speed port to be handed back to the companion controller during resume processing. This entails three changes: adding code to ehci-hcd to perform the handover, removing code from ohci-hcd to turn off ports during root-hub reinit, and adding code to ohci-hcd to turn on ports during PCI controller resume. (Other bus glue resume methods for platforms supporting high-speed controllers would need a similar change, if any existed.) Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 5月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2007 1 次提交
-
-
由 Dan Williams 提交于
Duplicate what Zach Brown did for pr_debug in commit 8b2a1fd1 [akpm@linux-foundation.org: fix a couple of things which broke] Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 2月, 2007 1 次提交
-
-
由 Ishizaki Kou 提交于
ps3_system_bus_driver_register is PS3 platform specific function. On other platforms, it triggers WARN_ON in kref_get. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 16 2月, 2007 1 次提交
-
-
由 Ishizaki Kou 提交于
ps3_system_bus_driver_register is PS3 platform specific function. On other platforms, it triggers WARN_ON in kref_get. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 2月, 2007 4 次提交
-
-
由 Geoff Levand 提交于
USB OHCI driver bus glue for the PS3 game console. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
Restructure the ohci_hcd_mod_init error handling code in to better support the multiple platform drivers. This does not change the functionality. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sylvain Munaut 提交于
PPC embedded systems can have a ohci controller builtin. In the new model, it will end up as a driver on the of_platform bus, this patches takes care of them. Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sylvain Munaut 提交于
The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 21 12月, 2006 2 次提交
-
-
由 Vitaly Wool 提交于
OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550. Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 02 12月, 2006 2 次提交
-
-
由 Alan Stern 提交于
This patch (as808b) moves the Root Hub Status Change interrupt-disable code in ohci-hcd back into the interrupt handler proper, to avoid the chance of adverse interactions with mediocre hardware implementations. It also deletes the root-hub status timer from within the interrupt-enable routine. There's no need to poll for status any more once interrupts are re-enabled. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Victor 提交于
A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 11月, 2006 1 次提交
-
-
由 Alan Stern 提交于
When a suspended OHCI controller sees a port's status change, it sets both the Root-Hub-Status-Change and the Resume-Detect bits in the Interrupt Status register. Processing both these bits, the driver tries to resume the root hub twice! This patch (as807) fixes the bug by ignoring RD if RHSC is set. It also prints a slightly more informative log message when a remote-wakeup event occurs. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 29 9月, 2006 1 次提交
-
-
由 Alan Stern 提交于
This patch (as790b) adds "autostop" support to ohci-hcd: the driver will automatically stop the host controller when no devices have been connected for at least one second. This feature is useful when the USB autosuspend facility isn't available, such as when CONFIG_USB_SUSPEND hasn't been set. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-