- 24 4月, 2008 11 次提交
-
-
由 Zhu Yi 提交于
On Wed, 2008-04-23 at 13:38 +0300, Tomas Winkler wrote: > This patch fixes problem in Makefile that prevented > built-in compilation of iwlcore Here is the second part. Without this, drivers/net/wireless/iwlwifi/build-in.o will not be linked into vmlinux. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Alan Cox. The IFF_UP test is a bit racey, because other entities outside of this driver's ioctl handler can modify that state, even though this ioctl handler runs under lock_kernel(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paulius Zaleckas 提交于
Use stats which now is in the net_device instead of one declared in ppp structure. Kill ppp_net_stats function, because by default it is used identical internal_stats function from net/core/dev.c Signed-of-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Commit b716bb91 ("iwlwifi: Cancel scanning upon association") moved the test of priv->vif in iwl{3945,4964}_mac_config_interface() outside of where priv->mutex is held, but still tries to do mutex_unlock() on return. This is clearly wrong and triggers a nasty lockdep warning when this codepath is triggered. Fix this by removing the mutex_unlock(). Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
priv->param_workaround_interval is unsigned, modparam_workaround_interval not. the former is never < 0. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
previously in this function: u32 index = (dwrq->flags & IW_ENCODE_INDEX) - 1; index is unsigned, so if -1, the original test (below) didn't work. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Some mainboards/CPUs don't allow DMA masks bigger than a certain limit. Some VIA crap^h^h^h^hdevices have an upper limit of 0xFFFFFFFF. So in this case a 64-bit b43 device would always fail to acquire the mask. Implement a workaround to fallback to lower DMA mask, as we can always also support a lower mask. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nick Kossifidis 提交于
*Fix radio chip identification on AR5424/2424 during ath5k_hw_attach *Try to assign an RF2413 radio on AR2424 for testing Changes-licensed-under: ISC Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds more workarounds for devices with broken BT bits. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
The HostFlags are a bitmask of 48bit. So we must use an u64 datatype to hold all bits. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds a workaround for invalid bluetooth SPROM settings on ASUS PCI cards. This will stop the microcode from poking with the BT GPIO line. This fixes data transmission on this device, as the BT GPIO line is used for something TX related on this device (probably the power amplifier or the radio). This also adds a modparam knob to help debugging this in the future, as more devices with this bug may show up. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 4月, 2008 3 次提交
-
-
由 Tomas Winkler 提交于
This patch fixes problem in Makefile that prevented built-in compilation of iwlcore Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile more concise") Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NYi Zhu <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2008 1 次提交
-
-
由 Mark Asselstine 提交于
These cli()/sti() calls are made in start_timer() and are therefor redundant since the register_lock is now used to protect register io from within scc_isr() and write_scc() (where all calls to start_timer() originate). Signed-off-by: NMark Asselstine <mark.asselstine@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2008 3 次提交
-
-
由 Julia Lawall 提交于
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Herbert Xu's commit fb93134d, entitled "[TCP]: Fix size calculation in sk_stream_alloc_pskb", has triggered a bug in the 5701 where the 5701 DMA engine will corrupt outgoing packets. This problem only happens when the starting address of the packet matches a certain range of offsets and only when the 5701 is placed downstream of a particular Intel bridge. This patch detects the problematic bridge and if present, readjusts the starting address of the packet data to a dword aligned boundary. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Reportred by Ingo Molnar: drivers/net/wireless/iwlwifi/iwl-debugfs.c: In function 'iwl_dbgfs_stations_read': drivers/net/wireless/iwlwifi/iwl-debugfs.c:256: error: 'struct iwl4965_tid_data' has no member named 'agg' Needs CONFIG_IWL4965_HT protection. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2008 6 次提交
-
-
由 Jeff Garzik 提交于
* remove changelog from source; its kept in git repository * consolidate descriptor version tests using nv_optimized() * consolidate NIC DMA start, stop and drain into nv_start_txrx(), nv_stop_txrx(), nv_drain_txrx() Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Paul Gortmaker 提交于
We were already doing what amounts to a get_phy_id from within get_phy_device, and rather than duplicate this for the TBIPA probing, we might as well just factor it out and make it available instead. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Paul Gortmaker 提交于
The BCM5464 can be used with the current broadcom PHY driver by just adding the appropriate chip ID and using the existing support within. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Dan Noe 提交于
Fix the warning: drivers/net/cxgb3/cxgb3_main.c: In function ‘offload_open’: drivers/net/cxgb3/cxgb3_main.c:936: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result Now the return value is checked; if sysfs_create_group() returns failure, a warning is printed using dev_dbg, and the code continues as before. Use of dev_dbg ensures printk is not needlessly included unless desired for debugging. Signed-off-by: NDan Noe <dpn@isomerica.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Atsushi Nemoto 提交于
On Sat, 12 Apr 2008 05:00:49 -0400, Jeff Garzik <jeff@garzik.org> wrote: > applied 1-6 Thanks. Could you apply this too, or hopufully fold into Andy Fleming's "phy: Change mii_bus id field to a string" patch (commit c69fedae) ? ------------------------------------------------------ Subject: [PATCH] tc35815: build fix Fix build failure caused by Andy Fleming's "phy: Change mii_bus id field to a string" patch. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergei Shtylyov 提交于
The driver stores the PCI resource address into 'unsigned long' variable before calling ioremap() on it. This warrants a kernel oops when the registers are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space mapped beyond 4 GB. The arch/ppc/ kernel has a fixup in ioremap() that creates an illusion of the PCI memory resources are mapped below 4 GB, but arch/powerpc/ code got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 17 4月, 2008 16 次提交
-
-
由 Eli Cohen 提交于
mlx4 hardware does not support external DDR memory. Moreover, UAR area (BAR 2) can change depending on FW version. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
When detaching the last QP from an MCG entry, we need to make sure that at any time, there will be no entry with zero number of QPs which is linked to the list of the MCGs of the corresponding hash index. So don't write back the MCG entry if we are removing the last QP; just unlink the entry. Also, remove an unnecessary MCG read when attaching a QP requires allocation of a new entry in the AMGM. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Vladimir Sokolovsky 提交于
Signed-off-by: NVladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
Signed-off-by: NEli Cohen <eli@mellnaox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
With the advent large clusters which utilize multicore hosts, 64K QPs is not enough. We should increase the default maximum for QPs to 128K. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
Add TSO support to the mlx4_ib driver. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
ConnectX devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NAli Ayub <ali@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The struct mlx4_interface.event() method was supposed to get an enum mlx4_dev_event, but the driver code was actually passing in the hardware enum mlx4_event values. Fix up the callers of mlx4_dispatch_event() so that they pass in the right type of value, and fix up the event method in mlx4_ib so that it can handle the enum mlx4_dev_event values. This eliminates the need for the subtype parameter to the event method, so remove it. This also fixes the sparse warning drivers/net/mlx4/intf.c:127:48: warning: mixing different enum types drivers/net/mlx4/intf.c:127:48: int enum mlx4_event versus drivers/net/mlx4/intf.c:127:48: int enum mlx4_dev_event Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Joe Perches 提交于
Conglomerate from 4 separate patches from Joe. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Joe Perches 提交于
Conglomerate of 4 separate patches by Joe. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Denys Vlasenko 提交于
This patch replaces automatic constant arrays a-la const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00}; with static ones. Size difference for 32bit x86: text data bss dec hex filename 5418 129 0 5547 15ab linux-2.6.inline-ALLYES/drivers/net/sb1000.o 5396 129 0 5525 1595 linux-2.6.followup-ALLYES/drivers/net/sb1000.o Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Denys Vlasenko 提交于
drivers/net/sb1000.c has lots of inlined static functions. Mst of them are used at initialization, wait for some hardware register to change (wait using yield, sleep etc), or do slow port-based I/O. Inlining thse "for speed" makes no sense. This patch removes "inline" from biggest static function (regardless of number of callsites - gcc nowadays auto-inlines statics with one callsite). Size difference for 32bit x86: text data bss dec hex filename 6299 129 0 6428 191c linux-2.6-ALLYES/drivers/net/sb1000.o 5418 129 0 5547 15ab linux-2.6.inline-ALLYES/drivers/net/sb1000.o Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
This patch #if 0's the no longer used netxen_nic_link_ok(). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
netxen_workq can now become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Bruce Allan 提交于
The register tests should be run with all the proper flags enabled to maximize the test coverage code and make sure we are as close as we can get to testing regular traffic. Reformat the code for readability. Minor cleanups in the descriptor ring setup. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-