the patch below marks various read-only variables in block/* as const,
so that gcc can optimize the use of them; eg gcc will replace the use by
the value directly now and will even remove the memory usage of these.
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NJens Axboe <axboe@suse.de>

For filesystems with a blocksize < page size, we can merge same page
calls into the bio_vec at the end of the bio. This saves segments
on systems with a page size > the "normal" 4kb fs block size.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@suse.de>

Originally from: Nick Piggin <nickpiggin@yahoo.com.au>

Move current_io_context out of the get_request fastpth.  Also try to
streamline a few other things in this area.
Signed-off-by: NJens Axboe <axboe@suse.de>

Unlike other ioscheds, as-iosched handles alias by chaing them using
rq->queuelist.  As aliased requests are very rare in the first place,
this complicates merge/dispatch handling without meaningful
performance improvement.  This patch updates as-iosched to dump
aliased requests into dispatch queue as other ioscheds do.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

Setting RF (resume flag) allows a debugger to resume execution after a
code breakpoint without tripping the breakpoint again.  It is reset by
the CPU after execution of one instruction.

Requested by Stephane Eranian:
  "I am trying to the user HW debug registers on i386 and I am running
   into a problem with ptrace() not allowing access to EFLAGS_RF for
   POKEUSER (see FLAG_MASK).  [ ...  ] It avoids the need to remove the
   breakpoint, single step, and reinstall.  The equivalent functionality
   exists on IA-64 and is allowed by ptrace()"

Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These patches add the header linux/if_ether.h and change 1500 to
ETH_DATA_LEN in some files.
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus
and a different revision of the Socket CF+ Bluetooth card.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

kill the socket_shutdown()/shutdown_socket() confusion by making it
one single function. move cs_socket_put() in there. nicer to read and
smaller:

original:
   text	   data	    bss	    dec	    hex	filename
  25181	   1076	     32	  26289	   66b1	drivers/pcmcia/pcmcia_core.ko

patched:
   text	   data	    bss	    dec	    hex	filename
  24973	   1076	     32	  26081	   65e1	drivers/pcmcia/pcmcia_core.ko
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Convert users of kmalloc and memset to kzalloc
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Do not wildly probe the IO ports we're trying to use on PARISC.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Export the stored values instead of re-reading everything in the socket
information sysfs files, and make them accessible to all users, not only
to root.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This adds PCMCIA support for both MPC885ADS and MPC866ADS.

This is established not together with FADS, because 885 does not have
io_block_mapping() for BCSR area.
Also, some cleanups done both for 885ADS and MBX.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This fixes misconfiguration that could result in odd work of some old CF
cards.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Some PCMCIA sockets have statically mapped memory windows, but dynamically
mapped IO windows. Using the "nonstatic" socket library is inpractical for
them, as they do neither need a resource database (as we can trust the
kernel resource database on m68k and ppc) nor lots of other features of that
library. Let them get a small "iodyn" socket library (105 lines of code)
instead.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Update the PCMCIA sound drivers to handle the recent changes to the PCMCIA
core. A part of this merge was done by Takashi Iwai <tiwai@suse.de>.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.

With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:

        int (*probe)            (struct pcmcia_device *dev);
        void (*remove)          (struct pcmcia_device *dev);

        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The linked list of devices managed by each PCMCIA driver is, in very most
cases, unused. Therefore, remove it from many drivers.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the old "detach" mechanism as it is unused now.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function.
Old functionality is preserved, for the moment.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Merge the suspend and resume methods for 16-bit PCMCIA cards into the
device model -- for both runtime power management and suspend to ram/disk.

Bugfix in ds.c by Richard Purdie
Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Move the suspend and resume methods out of the event handler, and into
special functions. Also use these functions for pre- and post-reset, as
almost all drivers already do, and the remaining ones can easily be
converted.

Bugfix to include/pcmcia/ds.c
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Make the bridge specific initialization code config options depending on
CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are
available. Disabling all of the specific tweaks cuts off more than half
of yenta_socket.ko.
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Also return a value if CONFIG_PCMCIA_PROBE is not set.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Add a return value to pcmcia_validate_mem.  Only if we have enough memory
available to map the CIS, we should proceed in trying to determine information
about the device.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The .get_socket callback is never used by the PCMCIA core, therefore remove
it.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the register_callback declaration in struct pccard_operations as it is
unused.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Don't waste cpu time in yenta interrupt handler when the interrupt was for
another device.
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Fix macro abuse in pcmcia.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

arch/ia64/kernel/setup.c: In function `show_cpuinfo':
arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 12)
arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 13)

Introduced by 95235ca2Signed-off-by: NTony Luck <tony.luck@intel.com>

	I have recently been switching from using 2.4.32 on my trusty
old Sparc Blade 100 to using 2.6.15 .  Some of the problems I ran into
were distorted video when the console was active (missing first
character, skipped dots) and when running X windows (colored snow,
stripes, missing pixels).  A quick examination of the 2.6 versus 2.4
source for the ATY driver revealed alot of changes.

         A closer look at the code/data for the 64GR/XL chip revealed
two minor "typos" that the rewriter(s) of the code made.  The first is
a incorrect clock value (230 .vs. 235) and the second is a missing
flag (M64F_SDRAM_MAGIC_PLL).  Making both these changes seems to have
fixed my problem.  I tend to think the 235 value is the correct one,
as there is a 29.4 Mhz clock crystal close to the video chip and 235.2
(29.4*8) is too close to 235 to make it a coincidence.

	The flag for M64F_SDRAM_MAGIC_PLL was dropped during the
changes made by adaplas in file revision 1.72 on the old bitkeeper
repository.

	The change relating to the clock rate has been there forever,
at least in the 2.6 tree.  I'm not sure where to look for the old 2.5
tree or if anyone cares when it happened.

On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the
clock crystal frequency is 235.2 Mhz, not 230 Mhz.  The chipset also
requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL
properly for the DRAM.
Signed-off-by: NLuis F. Ortiz <lfo@Polyad.Org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HOPLIMIT metric is appropriate to TCP reset sent by REJECT target
than hard-coded max TTL. Thanks to David S. Miller for hint.
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CC [M]  net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.o
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c: In function 'ipv4_refrag':
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c:198: error: dereferencing pointer to incomplete type
make[3]: *** [net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.o] Error 1
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>