'current' is also defined in asm-generic/current.h.

When compiling this driver for older kernels with the media_build system,
this header is included via compat.h and it no longer compiles. Rename
current to cur.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add FIXME code comment:
/* FIXME: check if it is fe_adap[1] */

It is likely that it should be adap->fe_adap[1].fe in the second clause,
but this has never been verified.
Suggested-by: NMauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The same code is executed regardless of whether c->frequency < 600000000
or c->frequency < 730000000 is true.

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since commit 1eace834 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Probe of dvb_usb_gl861 was working at least with v4.4. Noticed the issue
with v4.13 but according to similar issues the problem started with v4.9.

[   15.288065] transfer buffer not dma capable
[   15.288090] WARNING: CPU: 2 PID: 493 at drivers/usb/core/hcd.c:1595 usb_hcd_map_urb_for_dma+0x4e2/0x640
...CUT...
[   15.288791] dvb_usb_gl861: probe of 3-7:1.0 failed with error -5

Tested with MSI Mega Sky 580 DVB-T Tuner [GL861]

[mchehab+samsung@kernel.org: rebased on the top of upstream]
Cc: stable@vger.kernel.org
Signed-off-by: NMika Båtsman <mika.batsman@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Some decoders and encoders can potentially have more than one source pad,
so update the description to say 'at least one source pad'.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This add HEVC codec support for venus versions 3xx and 4xx.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This adds sdm845 DT compatible string with it's resource
data table.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This is implementing multi-stream decoder support. The multi-stream
will be used to enable/disable the primary/secondary decoder
outputs. Depending on formats on both decoder outputs we could
implement downscale, dithering and supporting UBWC (universal
bandwidth compression) formats. The UBWC compressed raw format is
used to optimize interconnect bandwidth for bigger resolutions
like 4K and hence we will get some power-saving benefits as well.

Both decoder outputs are distinguished by buffer_type field in
the HFI packets. For example HFI_BUFFER_OUTPUT is the buffer type
for primary decoder output and HFI_BUFFER_OUTPUT2 is for secondary
decoder output.

Starting from Venus 4xx the DPB buffers format must be UBWC, so
the multi-stream becomes mandatory for this Venus version. That
means that we need to allocate internally in the driver a set of
DPB buffers (with UBWC NV12 format) and give them to the firmware.
The other decoder output (we called it OPB) format will be NV12
linear format and with the same resolution (or smaller in case
the user wants to downscale).

The DPB buffers are used for decoder reference frames and those
have to be in a specific format (UBWC). So one decoder output is
used to fill those reference buffers while the other output is
used to fill the userspace buffers with the user requested format.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This move the calculations of raw and compressed buffer sizes
on common helper and make it identical for encoder and decoder.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Make a new function vdec_output_conf() for decoder output
configuration. vdec_output_conf() will set properties via
HFI interface related to the output configuration, and
keep vdec_set_properties() which will set properties
related to decoding parameters.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Rework and rename vdec_cap_num_buffers() to get the number of
input buffers too.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a helper function to return current output picture buffer size.
OPB sizes can vary depending on the selected decoder output(s).
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Extend venus_helper_set_num_bufs() helper function with one more
argument to set number of output buffers for the secondary decoder
output.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

These are new properties applicable to Venus version 4xx. Add the
helpers and call them from decoder and encoder drivers.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The new helper will has one more argument for buffer type, that
way the decoder can configure the format on it's secondary
output.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This adds one more function argument to pass buffer type to
set_output_resolution() helper function. That is a preparation
to support secondary decoder output.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Delete not used flag for capture buffer allocation mode and
no longer used cap_bufs_mode_dynamic from instance structure.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add and use a helper function to set actual buffer size for
particular buffer type. This is also preparation to use
the second decoder output.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Adds a new helper function to set dynamic buffer mode if it is
supported by current HFI version. The dynamic buffer mode is
set unconditionally for both decoder outputs.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Rename is_reg_unreg_needed() to better name is_dynamic_bufmode() and
use buffer mode from enumerated per codec capabilities.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This adds common capability parser for all supported Venus
versions. Having it will help to enumerate better the supported
raw formats and codecs and also the capabilities for every
codec like max/min width/height, framerate, bitrate and so on.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add two more clocks for Venus 4xx in core structure and create
a new power enable function to handle it for 3xx/4xx versions.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This adds suspend (power collapse) functionality by reusing
the suspend function for Venus 3xx and also enables idle indicator
property for Venus 4xx (where it is disabled by default).
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This moves setting of default properties (firmware debug, idle
indicator and low power mode) from session init to core init.
All of those properties are need to be enabled/disabled early
so that they could be used before the clients are even initialized.

The other reason is to set idle indicator property early before
we enter into venus_suspend function where we need to check for
ARM9 WFI.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This fixes the suspend function for Venus 3xx versions by
add a check for WFI (wait for interrupt) bit. This bit
is on when the ARM9 is idle and entered in low power mode.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add AXI halt support for version 4xx by using venus wrapper
registers.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This adds handling of buffers of type OUTPUT2 which is needed to
support Venus 4xx version.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This makes possible to handle session_continue for 4xx as well.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Adds set_properties method to handle newer 4xx properties and
fall-back to 3xx for the rest.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

HFI version 4xx can pass more properties in the sequence change
event, extend the event structure with them.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This covers the differences between 1xx,3xx and 4xx.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Data pointer should be incremented by size of the structure not
the size of a pointer, correct the mistake.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NAlexandre Courbot <acourbot@chromium.org>
Tested-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>