Previous guard of IS_ENABLED(CONFIG_IPV6) is not sufficient when cxgbi drivers
are built into kernel but ipv6 is not.

v2: Use Kconfig to disable compiling cxgbi built into kernel when ipv6 is
compiled as a module

Fixes: e81fbf6c ("libcxgbi:cxgb4i Guard ipv6 code with a config check")
Fixes: fc8d0590 ("libcxgbi: Add ipv6 api to driver")
Signed-off-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// </smpl>

[bhelgaas: add semantic patch]
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Remove the now unnecessary memset too.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: Michael Neuffer <mike@i-Connect.Net>
Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace obsolete strict_strto with more appropriate kstrto calls
Signed-off-by: NDaniel Walter <dwalter@google.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These belong to the t4 msg header, will ensure there is no accidental code
duplication in the future
Signed-off-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If get_host_stats failes we are using kfree to free the
skb. We should be using kfree_skb.

This patch was made over Christoph's scsi-queue drivers-for-3.17 branch.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As pointed out by the intel guys, there is no need to hold rcu read lock in
cxgbi_inet6addr_handler(), this patch removes it.

Fixes: 759a0cc5 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api")
Signed-off-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If scsi_remove_host() is called while an rport is in the blocked state
then scsi_remove_host() will only finish if the rport is unblocked
from inside a timer function. Make sure that an rport only enters the
blocked state if a timer will be started that will unblock it. This
avoids that unloading the ib_srp kernel module after having
disconnected the initiator from the target system results in a
deadlock if both the fast_io_fail_tmo and dev_loss_tmo parameters have
been set to "off".
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDavid Dillow <dave@thedillows.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix printk format warnings (seen on i386 builds):

../drivers/scsi/u14-34f.c: In function 'port_detect':
../drivers/scsi/u14-34f.c:630:28: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'u64' [-Wformat=]
../drivers/scsi/u14-34f.c: In function 'u14_34f_queuecommand_lck':
../drivers/scsi/u14-34f.c:1290:25: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type 'int' [-Wformat=]
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The current implementation may mix the negative value returned from
pm8001_set_nvmd with count. -(-ENOMEM) could be interpreted as bytes
programmed, this patch fixes it.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The loopcount is calculated by using some weird magic. Use instead a boring
macro.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When a iscsi nop as ping timedout we were failing with the
common connection error code, ISCSI_ERR_CONN_FAILED. This
patch adds a new error code for this problem so can properly
track/distinguish in userspace.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When the get_host_stats call was not supported we were
returing EINVAL. This has us return ENOSYS, because for
software iscsi drivers where there is no host it is ok to not
have this callout.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

iscsi_get_host_stats was dropping the error code returned
by drivers like qla4xxx.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

qla4xxx was not always returning -EXYZ error codes when
qla4xxx_get_host_stats failed.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

the qla4xxx_alloc_fw_dump() calls dma_alloc_coherent() but does not
check its return value.
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-By: NNilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
And in some cases modified to copy one character less than the overall
length, as the entire area is already zeroed.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-By: NNilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-By: NNilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-By: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Reviewed-by: NJack Wang <xjtuwjp@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Some devices don't like REPORT SUPPORTED OPERATION CODES and will
simply timeout causing sd_mod init to take a very very long time.
Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being
issued. Add it to Promise Vtrak E610f entry in scsi scan
blacklist. Fixes bug #79901 reported at
https://bugzilla.kernel.org/show_bug.cgi?id=79901

Fixes: 98dcc2946adb ("SCSI: sd: Update WRITE SAME heuristics")
Signed-off-by: NJanusz Dziemidowicz <rraptorr@nails.eu.org>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NArvind Kumar <arvindkumar@vmware.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When a call to request_irq() failed pm8001_setup_msix()
still returns the success. This udate fixes the described
misbehaviour.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NJack Wang <xjtuwjp@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There is no need to call pci_disable_msix() in case
the previous call to pci_enable_msix() failed
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NArtur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NAnil Gurumurthy <anil.gurumurthy@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NAnil Gurumurthy <anil.gurumurthy@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Function pci_enable_msix() should not be called in case
it threw a negative errno from a previous call.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NAnil Gurumurthy <anil.gurumurthy@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: N"Suma Ramars (sramars)" <sramars@cisco.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

hostt->name might contain space, so use the ->proc_name short name instead
when creating per-driver command slabs.
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
Reported-by: Npoma <pomidorabelisima@gmail.com>
Tested-by: Npoma <pomidorabelisima@gmail.com>
Reviewed-by: NVladimir Davydov <vdavydov@parallels.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 - add host_lock option whose default value is 0 which removes the
   host_lock around all queued commands
 - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke
   the scsi_done callback into the mid-layer. The default
   is still delay=1 which uses a timer to delay 1 jiffy
 - wire .change_queue_depth and .change_queue_type
   functions to better simulate queueing in a modern LLD
 - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce
   debug output associated with queue full, plus from
   .change_queue_depth and .change_queue_type functions
 - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports
   all queued_arr fulls at TASK_SET_FULL, otherwise
   SCSI_MLQUEUE_HOST_BUSY is returned
 - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works
   together with the every_nth option (> 0) to count
   occurrences of num_in_q==queue_depth. When every_nth
   is reached the victim (a command) yields TASK SET FULL
 - clean up many debug messages.
 - add ndelay=<nanosecs> option that uses high resolution
   timers; active if > 0 and then overrides delay= option
 - expand Unit Attention handling: POR, BUS_RESET and
   MODE PARAMETERS CHANGED
 - support .eh_target_reset_handler and drop .bios_param
 - add OPT_N_WCE mask so caching page yields WCE=0
 - add OPT_RESET_NOISE mask to log aborts and resets
 - add OPT_NO_CDB_NOISE mask to not log each cdb
 - MODE SELECT support for changing caching page's WCE
 - name common ioctls in log
 - when fake_rw=1, do not vmalloc fake store; make
   UNMAP and WRITE SAME obey fake_rw
 - more logging and code improvements including better
   sense buffer handling

With fio and four (pseudo) devices I have observed 1.2 M IOPS
on my equipment. Rob Elliott who has done much testing and made
numerous suggestions, has better IOPS results than mine.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NRobert Elliott <elliott@hp.com>
Tested-by: NRobert Elliott <elliott@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add blist flags to permit the reading of the VPD pages even when
the target may claim SPC-2 compliance. MSFT targets currently
claim SPC-2 compliance while they implement post SPC-2 features.
With this patch we can correctly handle WRITE_SAME_16 issues.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix many warnings with incorrect endian assumptions
which makes the code unportable to new architectures.

The UFS specification defines the byte order as big-endian
for UPIU structure and little-endian for the host controller
transfer/task management descriptors.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: NDolev Raviv <draviv@codeaurora.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Make undeclared functions static to suppress warnings
from sparse tool.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: NDolev Raviv <draviv@codeaurora.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Instead of copying information to fw_control_context free it.

The task is forgotten thus also the reference to fw_control_context
and the completion thread takes the info from virt_ptr again.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The driver checks the return valu, but after he tries to wait_for_completion
which might never happen.  Also the ioctl buffer is freed at the end of the
function, so the first removal is not needed.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ccb->fw_control_context is copied to local fw_control_context and
the local variable is never used later

Free ccb->fw_control_context.  The task is forgotten thus also the
reference to fw_control_context and the completion thread takes the info
from virt_ptr again.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppche
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: NJack Wang <xjtuwjp@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removal of null pointer checks that could never happen
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: NJack Wang <xjtuwjp@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>