TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only
currently contain further nested attributes, which are parsed by
hand, so the policy is never actually used resulting in a W=1
build warning:

net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=]
 enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = {

Add the validation anyway to avoid potential bugs when other
attributes are added and to make the attribute structure slightly
more clear.  Validation will also set extact to point to bad
attribute on error.

Fixes: 0a6e7778 ("net/sched: allow flower to match tunnel options")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NSimon Horman <simon.horman@netronome.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The reserved variable should be named reserved1.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only first fragment has the sport/dport information,
not the following ones.

If we want consistent hash for all fragments, we need to
ignore ports even for first fragment.

This bug is visible for IPv6 traffic, if incoming fragments
do not have a flow label, since skb_get_hash() will give
different results for first fragment and following ones.

It is also visible if any routing rule wants dissection
and sport or dport.

See commit 5e5d6fed ("ipv6: route: dissect flow
in input path if fib rules need it") for details.

[edumazet] rewrote the changelog completely.

Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Signed-off-by: N배석진 <soukjin.bae@samsung.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A null dereference was observed when a sysctl was being set
from userspace and rmnet was stuck trying to complete some actions
in the NETDEV_REGISTER callback. This is because the real_dev is set
only after the device registration handler completes.

sysctl call stack -

<6> Unable to handle kernel NULL pointer dereference at
    virtual address 00000108
<2> pc : rmnet_vnd_get_iflink+0x1c/0x28
<2> lr : dev_get_iflink+0x2c/0x40
<2>  rmnet_vnd_get_iflink+0x1c/0x28
<2>  inet6_fill_ifinfo+0x15c/0x234
<2>  inet6_ifinfo_notify+0x68/0xd4
<2>  ndisc_ifinfo_sysctl_change+0x1b8/0x234
<2>  proc_sys_call_handler+0xac/0x100
<2>  proc_sys_write+0x3c/0x4c
<2>  __vfs_write+0x54/0x14c
<2>  vfs_write+0xcc/0x188
<2>  SyS_write+0x60/0xc0
<2>  el0_svc_naked+0x34/0x38

device register call stack -

<2>  notifier_call_chain+0x84/0xbc
<2>  raw_notifier_call_chain+0x38/0x48
<2>  call_netdevice_notifiers_info+0x40/0x70
<2>  call_netdevice_notifiers+0x38/0x60
<2>  register_netdevice+0x29c/0x3d8
<2>  rmnet_vnd_newlink+0x68/0xe8
<2>  rmnet_newlink+0xa0/0x160
<2>  rtnl_newlink+0x57c/0x6c8
<2>  rtnetlink_rcv_msg+0x1dc/0x328
<2>  netlink_rcv_skb+0xac/0x118
<2>  rtnetlink_rcv+0x24/0x30
<2>  netlink_unicast+0x158/0x1f0
<2>  netlink_sendmsg+0x32c/0x338
<2>  sock_sendmsg+0x44/0x60
<2>  SyS_sendto+0x150/0x1ac
<2>  el0_svc_naked+0x34/0x38

Fixes: b752eff5 ("net: qualcomm: rmnet: Implement ndo_get_iflink")
Signed-off-by: NSean Tranchetti <stranche@codeaurora.org>
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
net: aquantia: 2018-11 bugfixes

The patchset fixes a number of bugs found in various areas after
driver validation.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RX Checksum offloads could not be configured and ignored netdev features
flag for checksumming.
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packets with marked invalid IP/UDP/TCP checksums were considered as good
by the driver. The error was in a logic, processing offload bits in
RX descriptor.
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed a condition mistake due to which macvlans unicast
item number 32 was not added in the unicast filter.

The consequence is that when exactly 32 macvlans are created
on NIC, the last created macvlan receives no traffic because
its MAC was not registered in HW.

Fixes: 94b3b542 ("net: aquantia: vlan unicast address list correct handling")
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Tested-by: NNikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IOMMU fault may occurr on unbind/bind or if_down/if_up sequence.

Although driver disables the rings on down, this is not enough.
Due to internal HW design, during subsequent initialization
NIC sometimes may reuse RX descriptors cache and write to the
host memory from the descriptor cache.
That's get catched by IOMMU on host.

This patch invalidates the descriptor cache in NIC on interface down
to prevent writing to the cached descriptors and to the memory pointed
in those descriptors.
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Flow control statuses were not synchronized between blocks,
that caused packets/link drop on some corner cases, when
MAC sent PFC although Phy was not expecting these to come.

Driver should readout the negotiated FC from phy and
configure RX block accordigly.

This is done on each link change event with information from FW.

Fixes: 288551de ("net: aquantia: Implement rx/tx flow control ethtools callback")
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit f77f0aee ("net: use core MTU range checking in USB NIC
drivers") introduce a common MTU handling for usbnet. But it's missing
the necessary changes for smsc95xx. So set the MTU range accordingly.

This patch has been tested on a Raspberry Pi 3.

Fixes: f77f0aee ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ping problems with packets > 8191 as shown:

PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data.
8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms
wrong data byte 8144 should be 0xd0 but was 0x0
16    10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
      20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
%< ---------------snip--------------------------------------
8112  b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
      c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
8144  0 0 0 0 d0 d1
      ^^^^^^^
Notice the 4 bytes of 0 before the expected byte of d0.

Databook notes that the RX buffer must be a multiple of 4/8/16
bytes [1].

Update the DMA Buffer size define to 8188 instead of 8192. Remove
the -1 from the RX buffer size allocations and use the new
DMA Buffer size directly.

[1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a
    [section 8.4.2 - Table 8-24]

Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets.

Fixes: 286a8372 ("stmmac: add CHAINED descriptor mode support (V4)")
Suggested-by: NJose Abreu <jose.abreu@synopsys.com>
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Denis Bolotin says:

====================
qed: Slowpath Queue bug fixes

This patch series fixes several bugs in the SPQ mechanism.
It deals with SPQ entries management, preventing resource leaks, memory
corruptions and handles error cases throughout the driver.
Please consider applying to net.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A stuck ramrod should be deleted from the completion_pending list,
otherwise it will be added again in the future and corrupt the list.

Return error value to inform that ramrod is stuck and should be deleted.
Signed-off-by: NSagiv Ozeri <sagiv.ozeri@cavium.com>
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qed_sp_destroy_request() API was added for SPQ users that need to
free/return the entry they acquired in their error flows.
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When there are no SPQ entries left in the free_pool, new entries are
allocated and are added to the unlimited list. When an entry in the pool
is available, the content is copied from the original entry, and the new
entry is sent to the device. qed_spq_post() is not aware of that, so the
additional entry is stored in the original entry as p_post_ent, which can
later be returned to the pool.
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Free the allocated SPQ entry or return the acquired SPQ entry to the free
list in error flows.
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Multiple cpus might attempt to insert a new fragment in rhashtable,
if for example RPS is buggy, as reported by 배석진 in
https://patchwork.ozlabs.org/patch/994601/

We use rhashtable_lookup_get_insert_key() instead of
rhashtable_insert_fast() to let cpus losing the race
free their own inet_frag_queue and use the one that
was inserted by another cpu.

Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: N배석진 <soukjin.bae@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hns3_reset_notify_init_enet() only return error early if the return
value of hns3_restore_vlan() is not 0.

This patch adds checking for the return value of hns3_restore_vlan.

Fixes: 7fa6be4f ("net: hns3: fix incorrect return value/type of some functions")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't request tag insertion when it isn't present in outgoing skb.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maciej W. Rozycki says:

====================
FDDI: defza: Fix a bunch of small issues

 Here is a bunch of small fixes addressing issues that I missed in my
final round of testing.  None of these affect run-time behaviour.  One was
actually found by the kbuild bot, which turned out to be more pedantic
than my compiler.  See individual change descriptions for details.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver version string is obviously not meant to be changed at run
time, so mark it `const'.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the temporary data buffer used when tapping into the SMT Tx queue
from the outer function level into the conditional block it's actually
used in and its containing skb is also declared, making the structure of
code better.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix:

drivers/net/fddi/defza.h:238:1: warning: "/*" within comment [-Wcomment]

by adding a missing comment closing.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SPDX annotation for this driver does not match the license text,
which specifies GNU GPL 2 or later.  Make the two match by correcting
the SPDX tag.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-11-07

This series contains fixes to igb, i40e and ice drivers.

Anirudh fixes an issue during rebuild of the ice driver, where we need
to set the carrier state, as well as start or stop the queues all based
on the link status.  Removed functions that were duplicating current
functionality in the VSI rebuild/replay framework.

Dave fixes a potential resource collision during the remove path, so add
a check to see if we are in the middle of a reset.  Fixed the remove
path to ensure we call netif_napi_del() to free vectors before we set
vsi->netdev to NULL.

Akeem fixes an issue when the receive or transmit pause parameter is
set, results in link loss on the interface.  Fixed the spelling of
"Enabling" in error message.

Victor fixes potential memory leak by also freeing the related VSI
contexts in the unload path.

Md Fahad fixes a flag during port VLAN insertion, which was not being
set properly.

Brett fixes a transmit timeout during stress due to the hardware tail
and software tail were incorrectly out of sync.

Miroslav Lichvar fixes the igb PHC timecounter update interval to be
sure the timecounter is updated in time.

Chinh fixes the req_speeds variable to be u16 instead of u8 so that it
can handle all the link speeds.

Jake fixes i40e to add back the missing feature flags, which was causing
IP-in-IP offloads to be reported as not supported.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC
occurs prior to the initial setup of the local hw_features variable.

This means the features are set as user-changeable, but are not set in
the currently active feature list. This results in the features being
disabled at the driver's initial load.

Move the assignment after the initial assignment of hw_features, and
assign to the local variable. This ensures that NETIF_F_NTUPLE and
NETIF_F_HW_TC are marked as user-changeable, and also enables them by
default when the driver loads.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Since commit bacd75cf ("i40e/i40evf: Add capability exchange for
outer checksum", 2017-04-06) the i40e driver has not reported support
for IP-in-IP offloads. This likely occurred due to a bad rebase, as the
commit extracts hw_enc_features into its own variable. As part of this
change, it dropped the NETIF_F_FSO_IPXIP flags from the
netdev->hw_enc_features. This was unfortunately not caught during code
review.

Fix this by adding back the missing feature flags.

For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318d
("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20),
replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT.

NETIF_F_GSO_IPXIP6 was added in commit bf2d1df3 ("intel: Add support
for IPv6 IP-in-IP offload", 2016-05-20).
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Since the req_speeds field in struct ice_link_status is a u8,
req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught
by a coverity scan.

Fix this by changing req_speeds to be u16.
Reported-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NChinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.

Since commit 500462a9 ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Also, the
PHC may be adjusted to run up to 6% faster than real time and the system
clock up to 10% slower. Shorten the delay to 360 seconds to be sure the
timecounter is updated in time.

This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com>
Acked-by: NJacob Keller <jacob.e.keller@intel.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently if the driver does a TSO offload the bytecount sent to
netdev_tx_sent_queue will be incorrect. This is because in ice_tso we
overwrite the initial value that we set in ice_tx_map. This creates a
mismatch between the Tx and Tx clean flow. In the Tx clean flow we
calculate the bytecount (called total_bytes) as we clean the
descriptors so the value used in the Tx clean path is correct. Fix this
by using += in ice_tso instead of =. This fixes the mismatch in
bytecount mentioned above.
Signed-off-by: NBrett Creeley <brett.creeley@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Prior to this commit the driver was running into tx_timeouts when a
queue was stressed enough. This was happening because the HW tail
and SW tail (NTU) were incorrectly out of sync. Consequently this was
causing the HW head to collide with the HW tail, which to the hardware
means that all descriptors posted for Tx have been processed.

Due to the Tx logic used in the driver SW tail and HW tail are allowed
to be out of sync. This is done as an optimization because it allows the
driver to write HW tail as infrequently as possible, while still
updating the SW tail index to keep track. However, there are situations
where this results in the tail never getting updated, resulting in Tx
timeouts.

Tx HW tail write condition:
	if (netif_xmit_stopped(txring_txq(tx_ring) || !skb->xmit_more)
		writel(sw_tail, tx_ring->tail);

An issue was found in the Tx logic that was causing the afore mentioned
condition for updating HW tail to never happen, causing tx_timeouts.

In ice_xmit_frame_ring we calculate how many descriptors we need for the
Tx transaction based on the skb the kernel hands us. This is then passed
into ice_maybe_stop_tx along with some extra padding to determine if we
have enough descriptors available for this transaction. If we don't then
we return -EBUSY to the stack, otherwise we move on and eventually
prepare the Tx descriptors accordingly in ice_tx_map and set
next_to_watch. In ice_tx_map we make another call to ice_maybe_stop_tx
with a value of MAX_SKB_FRAGS + 4. The key here is that this value is
possibly less than the value we sent in the first call to
ice_maybe_stop_tx in ice_xmit_frame_ring. Now, if the number of unused
descriptors is between MAX_SKB_FRAGS + 4 and the value used in the first
call to ice_maybe_stop_tx in ice_xmit_frame_ring then we do not update
the HW tail because of the "Tx HW tail write condition" above. This is
because in ice_maybe_stop_tx we return success from ice_maybe_stop_tx
instead of calling __ice_maybe_stop_tx and subsequently calling
netif_stop_subqueue, which sets the __QUEUE_STATE_DEV_XOFF bit. This
bit is then checked in the "Tx HW tail write condition" by calling
netif_xmit_stopped and subsequently updating HW tail if the
afore mentioned bit is set.

In ice_clean_tx_irq, if next_to_watch is not NULL, we end up cleaning
the descriptors that HW sets the DD bit on and we have the budget. The
HW head will eventually run into the HW tail in response to the
description in the paragraph above.

The next time through ice_xmit_frame_ring we make the initial call to
ice_maybe_stop_tx with another skb from the stack. This time we do not
have enough descriptors available and we return NETDEV_TX_BUSY to the
stack and end up setting next_to_watch to NULL.

This is where we are stuck. In ice_clean_tx_irq we never clean anything
because next_to_watch is always NULL and in ice_xmit_frame_ring we never
update HW tail because we already return NETDEV_TX_BUSY to the stack and
eventually we hit a tx_timeout.

This issue was fixed by making sure that the second call to
ice_maybe_stop_tx in ice_tx_map is passed a value that is >= the value
that was used on the initial call to ice_maybe_stop_tx in
ice_xmit_frame_ring. This was done by adding the following defines to
make the logic more clear and to reduce the chance of mucking this up
again:

ICE_CACHE_LINE_BYTES		64
ICE_DESCS_PER_CACHE_LINE	(ICE_CACHE_LINE_BYTES / \
				 sizeof(struct ice_tx_desc))
ICE_DESCS_FOR_CTX_DESC		1
ICE_DESCS_FOR_SKB_DATA_PTR	1

The ICE_CACHE_LINE_BYTES being 64 is an assumption being made so we
don't have to figure this out on every pass through the Tx path. Instead
I added a sanity check in ice_probe to verify cache line size and print
a message if it's not 64 Bytes. This will make it easier to file issues
if they are seen when the cache line size is not 64 Bytes when reading
from the GLPCI_CNF2 register.
Signed-off-by: NBrett Creeley <brett.creeley@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In the remove path, the vsi->netdev is being set to NULL before the call
to free vectors. This is causing the netif_napi_del call to never be made.

Add a call to ice_napi_del to the same location as the calls to
unregister_netdev and just prior to them. This will use the reverse flow
as the register and netif_napi_add calls.
Signed-off-by: NDave Ertman <david.m.ertman@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Print should say "Enabling" instead of "Enaabling"
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

According to the spec, whenever insert PVID field is set, the VLAN
driver insertion mode should be set to 01b which isn't done currently.
Fix it.
Signed-off-by: NMd Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

ice_restore_vlan and active_vlans were originally put in place to
reprogram VLAN filters in the replay path. This is now done as part
of the much broader VSI rebuild/replay framework. So remove both
ice_restore_vlan and active_vlans
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In the unload path, all VSIs are freed. Also free the related VSI
contexts to prevent memory leaks.
Signed-off-by: NVictor Raj <victor.raj@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Setting Rx or Tx pause parameter currently results in link loss on the
interface, requiring the platform/host to be cold power cycled. Fix it.
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The remove path does not currently check to see if a
reset is in progress before proceeding.  This can cause
a resource collision resulting in various types of errors.

Check for reset in progress and wait for a reasonable
amount of time before allowing the remove to progress.
Signed-off-by: NDave Ertman <david.m.ertman@intel.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>