The placement is something TTM/BO internal and the RAS code should
avoid touching that directly.

Add a helper to create a BO at a fixed location and use that instead.

v2: squash in fixes (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use debugfs_remove_recursive to remove the whole debugfs
directory instead of removing the node one by one.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Call pcie bif ras query/inject in amdgpu ras.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

allow inject error to XGMI block via debugfs node ras_ctrl
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The table grows quickly during debug/development effort when
multiple RAS errors are injected. Allow to avoid this by setting
table header back to empty if needed.

v2: Switch to debugfs entry instead of load time parameter.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move umc ras init from ras module to umc block, generic ras module
should pay less attention to specific ras block.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes driver load regression on APUs.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ras recovery_init should be called after ttm init,
bad page reserve should be put in front of gpu reset since i2c
may be unstable during gpu reset.
add cleanup for recovery_init and recovery_fini

v2: add more comment and print.
    remove cancel_work_sync in recovery_init.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

support eeprom records load and save for ras,
move EEPROM records storing to bad page reserving

v2: remove redundant check for con->eh_data
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

change bps type from retired page to eeprom table record, prepare for
saving umc error records to eeprom
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In case of RAS error allow user configure auto system
reboot through ras_ctrl.
This is also part of the temproray work around for the RAS
hang problem.

v4: Use latest kernel API for disk sync.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Problem:
Under certain conditions, when some IP bocks take a RAS error,
we can get into a situation where a GPU reset is not possible
due to issues in RAS in SMU/PSP.

Temporary fix until proper solution in PSP/SMU is ready:
When uncorrectable error happens the DF will unconditionally
broadcast error event packets to all its clients/slave upon
receiving fatal error event and freeze all its outbound queues,
err_event_athub interrupt  will be triggered.
In such case and we use this interrupt
to issue GPU reset. THe GPU reset code is modified for such case to avoid HW
reset, only stops schedulers, deatches all in progress and not yet scheduled
job's fences, set error code on them and signals.
Also reject any new incoming job submissions from user space.
All this is done to notify the applications of the problem.

v2:
Extract amdgpu_amdkfd_pre/post_reset from amdgpu_device_lock/unlock_adev
Move amdgpu_job_stop_all_jobs_on_sched to amdgpu_job.c
Remove print param from amdgpu_ras_query_error_count

v3:
Update based on prevoius bug fixing patch to properly call amdgpu_amdkfd_pre_reset
for other XGMI hive memebers.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In late_init for ras, the helper function will be used to
1). disable ras feature if the IP block is masked as disabled
2). send enable feature command if the ip block was masked as enabled
3). create debugfs/sysfs node per IP block
4). register interrupt handler

v2: check ih_info.cb to decide add interrupt handler or not

v3: add ras_late_fini for cleanup all the ras fs node and remove
interrupt handler
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ras controller interrupt and Ras err event athub interrupt are two dedicated
interrupts for RAS support.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use unsigned long type for the same ras count variable.
This will avoid overflow on 64 bit system.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

feature mask info is enough for rocm tool,
"cat /sys/class/drm/card0/device/ras/features" will get the
info like this:

feature mask: 0x3ffb
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

call mmhub ras query/inject in amdgpu ras
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ras sub block index could be passed from shell command
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

remove confused ras error type info
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ce can also trigger interrupt, and even both ce and ue error can be
found in one ras query, distinguishing between ce and ue in interrupt
handler is uncessary.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Suggested-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

correctable error can also trigger interrupt in some ras blocks
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

umc error address query can get ce/ue error address and clear error
status
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

check gfx error count in both ras querry function and
ras interrupt handler.

gfx ras is still disabled by default due to known stability
issue found in gpu reset.
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

error injection address is not in gpu address space
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

only ue and ce errors are supported
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add error data as parameter for ras interrupt cb and process it
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

more than one error address may be recorded in one query
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

create new amdgpu_umc structure to for more umc
settings in future and switch to the new structure
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v1: increase ras ce/ue error count
v2: log the number of correctable and uncorrectable errors
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

check umc error count in both ras querry function and
ras interrupt handler
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are common structures that can be included by IP specific
source files
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NDennis Li <dennis.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this function is not needed any more. error injection is
the only way to validate ras but it can't be executed in
amdgpu_ras_init, where gpu is even not initialized
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

error injection to other IP blocks (except UMC) will be enabled
until RAS feature stablize on those IP blocks
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

driver shouldn't init any ras debugfs/sysfs node for ASICs that don't have ras
hardware ability
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this function is not needed any more. error injection is
the only way to validate ras but it can't be executed in
amdgpu_ras_init, where gpu is even not initialized
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

error injection to other IP blocks (except UMC) will be enabled
until RAS feature stablize on those IP blocks
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

driver shouldn't init any ras debugfs/sysfs node for ASICs that don't have ras
hardware ability
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As long as the address is mapped with vram, we can do an error
injection.
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: xinhui pan <xinhui.pan@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Feifei Xu <Feifei.Xu@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Delete the unused drmP.h from amdgpu.h.
Fix fallout in various files.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-5-sam@ravnborg.org