stable inclusion
from stable-5.10.60
commit b0efc93271caf3868885a953f7f71c3aced7ba61
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b0efc93271caf3868885a953f7f71c3aced7ba61

--------------------------------

commit a6862e67 upstream.

Turn some comments into lockdep asserts.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit dcdb587ac470f1c2476688318c81897f3ee1c233
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dcdb587ac470f1c2476688318c81897f3ee1c233

--------------------------------

commit 52dfd86a upstream.

Opening a new file is done in 2 steps on regular filesystems:

1. Call the create inode-op on the parent-dir to create an inode
to hold the meta-data related to the file.
2. Call the open file-op to get a handle for the file.

vboxsf however does not really use disk-backed inodes because it
is based on passing through file-related system-calls through to
the hypervisor. So both steps translate to an open(2) call being
passed through to the hypervisor. With the handle returned by
the first call immediately being closed again.

Making 2 open calls for a single open(..., O_CREATE, ...) calls
has 2 problems:

a) It is not really efficient.
b) It actually breaks some apps.

An example of b) is doing a git clone inside a vboxsf mount.
When git clone tries to create a tempfile to store the pak
files which is downloading the following happens:

1. vboxsf_dir_mkfile() gets called with a mode of 0444 and succeeds.
2. vboxsf_file_open() gets called with file->f_flags containing
O_RDWR. When the host is a Linux machine this fails because doing
a open(..., O_RDWR) on a file which exists and has mode 0444 results
in an -EPERM error.

Other network-filesystems and fuse avoid the problem of needing to
pass 2 open() calls to the other side by using the atomic_open
directory-inode op.

This commit fixes git clone not working inside a vboxsf mount,
by adding support for the atomic_open directory-inode op.
As an added bonus this should also make opening new files faster.

The atomic_open implementation is modelled after the atomic_open
implementations from the 9p and fuse code.

Fixes: 0fd16957 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Reported-by: NLudovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 7cd14c1a7fed9fd5669c8578abd34ef35d4afc1a
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7cd14c1a7fed9fd5669c8578abd34ef35d4afc1a

--------------------------------

commit 02f840f9 upstream.

Factor out the code to create / release a struct vboxsf_handle into
2 new helper functions.

This is a preparation patch for adding atomic_open support.

Fixes: 0fd16957 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 433f0b31ebec09bb89c2414eb76571ced670a202
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=433f0b31ebec09bb89c2414eb76571ced670a202

--------------------------------

commit 18712c13 upstream.

Use vmx_need_pf_intercept() when determining if L0 wants to handle a #PF
in L2 or if the VM-Exit should be forwarded to L1.  The current logic fails
to account for the case where #PF is intercepted to handle
guest.MAXPHYADDR < host.MAXPHYADDR and ends up reflecting all #PFs into
L1.  At best, L1 will complain and inject the #PF back into L2.  At
worst, L1 will eat the unexpected fault and cause L2 to hang on infinite
page faults.

Note, while the bug was technically introduced by the commit that added
support for the MAXPHYADDR madness, the shame is all on commit
a0c13434 ("KVM: VMX: introduce vmx_need_pf_intercept").

Fixes: 1dbf5d68 ("KVM: VMX: Add guest physical address check in EPT violation and misconfig")
Cc: stable@vger.kernel.org
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210812045615.3167686-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 0ab67e3dfc4d7af799b76b405eba2dc6f36935f3
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0ab67e3dfc4d7af799b76b405eba2dc6f36935f3

--------------------------------

commit 7b9cae02 upstream.

Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to
effectively get the controls for the current VMCS, as opposed to using
vmx->secondary_exec_controls, which is the cached value of KVM's desired
controls for vmcs01 and truly not reflective of any particular VMCS.

While the waitpkg control is not dynamic, i.e. vmcs01 will always hold
the same waitpkg configuration as vmx->secondary_exec_controls, the same
does not hold true for vmcs02 if the L1 VMM hides the feature from L2.
If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL,
L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP.

Fixes: 6e3ba4ab ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210810171952.2758100-2-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 4a948c579ed6a12e248da57b9422a69b1ca2261c
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4a948c579ed6a12e248da57b9422a69b1ca2261c

--------------------------------

commit c32ac11d upstream.

On arm64, the stub only moves the kernel image around in memory if
needed, which is typically only for KASLR, given that relocatable
kernels (which is the default) can run from any 64k aligned address,
which is also the minimum alignment communicated to EFI via the PE/COFF
header.

Unfortunately, some loaders appear to ignore this header, and load the
kernel at some arbitrary offset in memory. We can deal with this, but
let's check for this condition anyway, so non-compliant code can be
spotted and fixed.

Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit fc7da433fa16b7e9a9efa92b41f684670535d99e
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fc7da433fa16b7e9a9efa92b41f684670535d99e

--------------------------------

commit 82414615 upstream.

Running an SMP kernel on an UP platform not prepared for it,
I encountered the following OOPS:

	BUG: Kernel NULL pointer dereference on read at 0x00000034
	Faulting instruction address: 0xc0a04110
	Oops: Kernel access of bad area, sig: 11 [#1]
	BE PAGE_SIZE=4K SMP NR_CPUS=2 CMPCPRO
	Modules linked in:
	CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-pmac-00001-g230fedfaad21 #5234
	NIP:  c0a04110 LR: c0a040d8 CTR: c0a04084
	REGS: e100dda0 TRAP: 0300   Not tainted  (5.13.0-pmac-00001-g230fedfaad21)
	MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 84000284  XER: 00000000
	DAR: 00000034 DSISR: 20000000
	GPR00: c0006bd4 e100de60 c1033320 00000000 00000000 c0942274 00000000 00000000
	GPR08: 00000000 00000000 00000001 00000063 00000007 00000000 c0006f30 00000000
	GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000005
	GPR24: c0c67d74 c0c67f1c c0c60000 c0c67d70 c0c0c558 1efdf000 c0c00020 00000000
	NIP [c0a04110] topology_init+0x8c/0x138
	LR [c0a040d8] topology_init+0x54/0x138
	Call Trace:
	[e100de60] [80808080] 0x80808080 (unreliable)
	[e100de90] [c0006bd4] do_one_initcall+0x48/0x1bc
	[e100def0] [c0a0150c] kernel_init_freeable+0x1c8/0x278
	[e100df20] [c0006f44] kernel_init+0x14/0x10c
	[e100df30] [c00190fc] ret_from_kernel_thread+0x14/0x1c
	Instruction dump:
	7c692e70 7d290194 7c035040 7c7f1b78 5529103a 546706fe 5468103a 39400001
	7c641b78 40800054 80c690b4 7fb9402e <81060034> 7fbeea14 2c080000 7fa3eb78
	---[ end trace b246ffbc6bbbb6fb ]---

Fix it by checking smp_ops before using it, as already done in
several other places in the arch/powerpc/kernel/smp.c

Fixes: 39f87561 ("powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()")
Cc: stable@vger.kernel.org
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/75287841cbb8740edd44880fe60be66d489160d9.1628097995.git.christophe.leroy@csgroup.euSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 312730cd15e097c11c4d0a0b8583a89a9ffd3d96
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=312730cd15e097c11c4d0a0b8583a89a9ffd3d96

--------------------------------

commit 77e89afc upstream.

Multi-MSI uses a single MSI descriptor and there is a single mask register
when the device supports per vector masking. To avoid reading back the mask
register the value is cached in the MSI descriptor and updates are done by
clearing and setting bits in the cache and writing it to the device.

But nothing protects msi_desc::masked and the mask register from being
modified concurrently on two different CPUs for two different Linux
interrupts which belong to the same multi-MSI descriptor.

Add a lock to struct device and protect any operation on the mask and the
mask register with it.

This makes the update of msi_desc::masked unconditional, but there is no
place which requires a modification of the hardware register without
updating the masked cache.

msi_mask_irq() is now an empty wrapper which will be cleaned up in follow
up changes.

The problem goes way back to the initial support of multi-MSI, but picking
the commit which introduced the mask cache is a valid cut off point
(2.6.30).

Fixes: f2440d9a ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 724d0a9850866ce2cc7df71b1497f49066535ccc
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=724d0a9850866ce2cc7df71b1497f49066535ccc

--------------------------------

commit d28d4ad2 upstream.

No point in using the raw write function from shutdown. Preparatory change
to introduce proper serialization for the msi_desc::masked cache.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.674391354@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 923368751866babfc8924e24cd19f61fda1bca23
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=923368751866babfc8924e24cd19f61fda1bca23

--------------------------------

commit 689e6b53 upstream.

The comments about preserving the cached state in pci_msi[x]_shutdown() are
misleading as the MSI descriptors are freed right after those functions
return. So there is nothing to restore. Preparatory change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.621609423@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit e42fb8e6161e6cbfd74bc28787823a9928752297
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e42fb8e6161e6cbfd74bc28787823a9928752297

--------------------------------

commit 361fd373 upstream.

msi_mask_irq() takes a mask and a flags argument. The mask argument is used
to mask out bits from the cached mask and the flags argument to set bits.

Some places invoke it with a flags argument which sets bits which are not
used by the device, i.e. when the device supports up to 8 vectors a full
unmask in some places sets the mask to 0xFFFFFF00. While devices probably
do not care, it's still bad practice.

Fixes: 7ba1930d ("PCI MSI: Unmask MSI if setup failed")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.568173099@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 042e03c9cdab2f553921838b3083575f92492a64
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=042e03c9cdab2f553921838b3083575f92492a64

--------------------------------

commit b9255a7c upstream.

Nothing enforces the posted writes to be visible when the function
returns. Flush them even if the flush might be redundant when the entry is
masked already as the unmask will flush as well. This is either setup or a
rare affinity change event so the extra flush is not the end of the world.

While this is more a theoretical issue especially the logic in the X86
specific msi_set_affinity() function relies on the assumption that the
update has reached the hardware when the function returns.

Again, as this never has been enforced the Fixes tag refers to a commit in:
   git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.515188147@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 0b2509d7a90c11666280acf9ada4add767c2b819
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0b2509d7a90c11666280acf9ada4add767c2b819

--------------------------------

commit da181dc9 upstream.

The specification (PCIe r5.0, sec 6.1.4.5) states:

    For MSI-X, a function is permitted to cache Address and Data values
    from unmasked MSI-X Table entries. However, anytime software unmasks a
    currently masked MSI-X Table entry either by clearing its Mask bit or
    by clearing the Function Mask bit, the function must update any Address
    or Data values that it cached from that entry. If software changes the
    Address or Data value of an entry while the entry is unmasked, the
    result is undefined.

The Linux kernel's MSI-X support never enforced that the entry is masked
before the entry is modified hence the Fixes tag refers to a commit in:
      git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Enforce the entry to be masked across the update.

There is no point in enforcing this to be handled at all possible call
sites as this is just pointless code duplication and the common update
function is the obvious place to enforce this.

Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Reported-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.462096385@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit aa8092c1d1f142f797995d0448afb73a5148f4ae
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=aa8092c1d1f142f797995d0448afb73a5148f4ae

--------------------------------

commit 7d5ec3d3 upstream.

When MSI-X is enabled the ordering of calls is:

  msix_map_region();
  msix_setup_entries();
  pci_msi_setup_msi_irqs();
  msix_program_entries();

This has a few interesting issues:

 1) msix_setup_entries() allocates the MSI descriptors and initializes them
    except for the msi_desc:masked member which is left zero initialized.

 2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets
    up the MSI interrupts which ends up in pci_write_msi_msg() unless the
    interrupt chip provides its own irq_write_msi_msg() function.

 3) msix_program_entries() does not do what the name suggests. It solely
    updates the entries array (if not NULL) and initializes the masked
    member for each MSI descriptor by reading the hardware state and then
    masks the entry.

Obviously this has some issues:

 1) The uninitialized masked member of msi_desc prevents the enforcement
    of masking the entry in pci_write_msi_msg() depending on the cached
    masked bit. Aside of that half initialized data is a NONO in general

 2) msix_program_entries() only ensures that the actually allocated entries
    are masked. This is wrong as experimentation with crash testing and
    crash kernel kexec has shown.

    This limited testing unearthed that when the production kernel had more
    entries in use and unmasked when it crashed and the crash kernel
    allocated a smaller amount of entries, then a full scan of all entries
    found unmasked entries which were in use in the production kernel.

    This is obviously a device or emulation issue as the device reset
    should mask all MSI-X table entries, but obviously that's just part
    of the paper specification.

Cure this by:

 1) Masking all table entries in hardware
 2) Initializing msi_desc::masked in msix_setup_entries()
 3) Removing the mask dance in msix_program_entries()
 4) Renaming msix_program_entries() to msix_update_entries() to
    reflect the purpose of that function.

As the masking of unused entries has never been done the Fixes tag refers
to a commit in:
   git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.403833459@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 7e90e81a4b59128cd81d909dba8e3ea3cdc9a831
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7e90e81a4b59128cd81d909dba8e3ea3cdc9a831

--------------------------------

commit 43855395 upstream.

The ordering of MSI-X enable in hardware is dysfunctional:

 1) MSI-X is disabled in the control register
 2) Various setup functions
 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing
    the MSI-X table entries
 4) MSI-X is enabled and masked in the control register with the
    comment that enabling is required for some hardware to access
    the MSI-X table

Step #4 obviously contradicts #3. The history of this is an issue with the
NIU hardware. When #4 was introduced the table access actually happened in
msix_program_entries() which was invoked after enabling and masking MSI-X.

This was changed in commit d71d6432 ("PCI/MSI: Kill redundant call of
irq_set_msi_desc() for MSI-X interrupts") which removed the table write
from msix_program_entries().

Interestingly enough nobody noticed and either NIU still works or it did
not get any testing with a kernel 3.19 or later.

Nevertheless this is inconsistent and there is no reason why MSI-X can't be
enabled and masked in the control register early on, i.e. move step #4
above to step #1. This preserves the NIU workaround and has no side effects
on other hardware.

Fixes: d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NAshok Raj <ashok.raj@intel.com>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 2d2c668480278dffcd0167b012d196e30d953b09
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2d2c668480278dffcd0167b012d196e30d953b09

--------------------------------

commit b9cc7d8a upstream.

When the interrupt interval is greater than 2 ^ PREDICTION_BUFFER_SIZE *
PREDICTION_FACTOR us and less than 1s, the calculated index will be greater
than the length of irqs->ema_time[]. Check the calculated index before
using it to prevent array overflow.

Fixes: 23aa3b9a ("genirq/timings: Encapsulate storing function")
Signed-off-by: NBen Dai <ben.dai@unisoc.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210425150903.25456-1-ben.dai9703@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 355754194b483275d6a5378bfe49a6a4d73327cb
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=355754194b483275d6a5378bfe49a6a4d73327cb

--------------------------------

commit dbbc9357 upstream.

msi_domain_alloc_irqs() invokes irq_domain_activate_irq(), but
msi_domain_free_irqs() does not enforce deactivation before tearing down
the interrupts.

This happens when PCI/MSI interrupts are set up and never used before being
torn down again, e.g. in error handling pathes. The only place which cleans
that up is the error handling path in msi_domain_alloc_irqs().

Move the cleanup from msi_domain_alloc_irqs() into msi_domain_free_irqs()
to cure that.

Fixes: f3b0946d ("genirq/msi: Make sure PCI MSIs are activated early")
Signed-off-by: NBixuan Cui <cuibixuan@huawei.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210518033117.78104-1-cuibixuan@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit f0736bed18fb13f7509ded58c7d9c6ab50583038
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f0736bed18fb13f7509ded58c7d9c6ab50583038

--------------------------------

commit 064855a6 upstream.

Creating a new sub monitoring group in the root /sys/fs/resctrl leads to
getting the "Unavailable" value for mbm_total_bytes and mbm_local_bytes
on the entire filesystem.

Steps to reproduce:

  1. mount -t resctrl resctrl /sys/fs/resctrl/

  2. cd /sys/fs/resctrl/

  3. cat mon_data/mon_L3_00/mbm_total_bytes
     23189832

  4. Create sub monitor group:
  mkdir mon_groups/test1

  5. cat mon_data/mon_L3_00/mbm_total_bytes
     Unavailable

When a new monitoring group is created, a new RMID is assigned to the
new group. But the RMID is not active yet. When the events are read on
the new RMID, it is expected to report the status as "Unavailable".

When the user reads the events on the default monitoring group with
multiple subgroups, the events on all subgroups are consolidated
together. Currently, if any of the RMID reads report as "Unavailable",
then everything will be reported as "Unavailable".

Fix the issue by discarding the "Unavailable" reads and reporting all
the successful RMID reads. This is not a problem on Intel systems as
Intel reports 0 on Inactive RMIDs.

Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data")
Reported-by: NPaweł Szulik <pawel.szulik@intel.com>
Signed-off-by: NBabu Moger <Babu.Moger@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NReinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213311
Link: https://lkml.kernel.org/r/162793309296.9224.15871659871696482080.stgit@bmoger-ubuntuSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 25216ed97da8f2cbea9a5ef6f22ca614b8ec971b
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=25216ed97da8f2cbea9a5ef6f22ca614b8ec971b

--------------------------------

commit 0c0e37dc upstream.

The IO/APIC cannot handle interrupt affinity changes safely after startup
other than from an interrupt handler. The startup sequence in the generic
interrupt code violates that assumption.

Mark the irq chip with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.

Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.832143400@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 19fb5dabedca56216732e35ec256ddb18d05c91e
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=19fb5dabedca56216732e35ec256ddb18d05c91e

--------------------------------

commit ff363f48 upstream.

The X86 MSI mechanism cannot handle interrupt affinity changes safely after
startup other than from an interrupt handler, unless interrupt remapping is
enabled. The startup sequence in the generic interrupt code violates that
assumption.

Mark the irq chips with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.

While the interrupt remapping MSI chip does not require this, there is no
point in treating it differently as this might spare an interrupt to a CPU
which is not in the default affinity mask.

For the non-remapping case go to the direct write path when the interrupt
is not yet started similar to the not yet activated case.

Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.886722080@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 4e52a4fe6f445a59a88c7ba60dd253a3643f0589
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4e52a4fe6f445a59a88c7ba60dd253a3643f0589

--------------------------------

commit 826da771 upstream.

X86 IO/APIC and MSI interrupts (when used without interrupts remapping)
require that the affinity setup on startup is done before the interrupt is
enabled for the first time as the non-remapped operation mode cannot safely
migrate enabled interrupts from arbitrary contexts. Provide a new irq chip
flag which allows affected hardware to request this.

This has to be opt-in because there have been reports in the past that some
interrupt chips cannot handle affinity setting before startup.

Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.779791738@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 2a28b52306f2d0797159b7e9819d4af3f0c4ef22
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2a28b52306f2d0797159b7e9819d4af3f0c4ef22

--------------------------------

[ Upstream commit 839ad22f ]

Skip (omit) any version string info that is parenthesized.

Warning: objdump version 15) is older than 2.19
Warning: Skipping posttest.

where 'objdump -v' says:
GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18

Fixes: 8bee738b ("x86: Fix objdump version check in chkobjdump.awk for different formats.")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 015e2c900b5da5f8cf1ce728fa723d802f725634
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=015e2c900b5da5f8cf1ce728fa723d802f725634

--------------------------------

[ Upstream commit 3a262423 ]

Commit 82046702 ("efi/libstub/arm64: Replace 'preferred' offset with
alignment check") simplified the way the stub moves the kernel image
around in memory before booting it, given that a relocatable image does
not need to be copied to a 2M aligned offset if it was loaded on a 64k
boundary by EFI.

Commit d32de913 ("efi/arm64: libstub: Deal gracefully with
EFI_RNG_PROTOCOL failure") inadvertently defeated this logic by
overriding the value of efi_nokaslr if EFI_RNG_PROTOCOL is not
available, which was mistaken by the loader logic as an explicit request
on the part of the user to disable KASLR and any associated relocation
of an Image not loaded on a 2M boundary.

So let's reinstate this functionality, by capturing the value of
efi_nokaslr at function entry to choose the minimum alignment.

Fixes: d32de913 ("efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure")
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit feb4a01d3ece8bed055a47366ca20c257c03868f
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=feb4a01d3ece8bed055a47366ca20c257c03868f

--------------------------------

[ Upstream commit 5b94046e ]

Distro versions of GRUB replace the usual LoadImage/StartImage calls
used to load the kernel image with some local code that fails to honor
the allocation requirements described in the PE/COFF header, as it
does not account for the image's BSS section at all: it fails to
allocate space for it, and fails to zero initialize it.

Since the EFI stub itself is allocated in the .init segment, which is
in the middle of the image, its BSS section is not impacted by this,
and the main consequence of this omission is that the BSS section may
overlap with memory regions that are already used by the firmware.

So let's warn about this condition, and force image reallocation to
occur in this case, which works around the problem.

Fixes: 82046702 ("efi/libstub/arm64: Replace 'preferred' offset with alignment check")
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit afcb84e6cf8cf8ab1fb8b4bfa44c6caad64ae581
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=afcb84e6cf8cf8ab1fb8b4bfa44c6caad64ae581

--------------------------------

[ Upstream commit 4152433c ]

The EFI stub random allocator used for kaslr on arm64 has a subtle
bug. In function get_entry_num_slots() which counts the number of
possible allocation "slots" for the image in a given chunk of free
EFI memory, "last_slot" can become negative if the chunk is smaller
than the requested allocation size.

The test "if (first_slot > last_slot)" doesn't catch it because
both first_slot and last_slot are unsigned.

I chose not to make them signed to avoid problems if this is ever
used on architectures where there are meaningful addresses with the
top bit set. Instead, fix it with an additional test against the
allocation size.

This can cause a boot failure in addition to a loss of randomisation
due to another bug in the arm64 stub fixed separately.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 2ddbfc81 ("efi: stub: add implementation of efi_random_alloc()")
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit e0ee8d9c31b5a670f35a4ff7e2daf59967f2f27a
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e0ee8d9c31b5a670f35a4ff7e2daf59967f2f27a

--------------------------------

[ Upstream commit cddce011 ]

There is a race between iterating over requests in
nbd_clear_que() and completing requests in recv_work(),
which can lead to double completion of a request.

To fix it, flush the recv worker before iterating over
the requests and don't abort the completed request
while iterating.

Fixes: 96d97e17 ("nbd: clear_sock on netlink disconnect")
Reported-by: NJiang Yadong <jiangyadong@bytedance.com>
Signed-off-by: NXie Yongji <xieyongji@bytedance.com>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210813151330.96-1-xieyongji@bytedance.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit f5cefe9a52a637f9fc39d05bd70de0d4acb890d6
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f5cefe9a52a637f9fc39d05bd70de0d4acb890d6

--------------------------------

[ Upstream commit 49b0b6ff ]

There's a potential deadlock case when remove the vsock device or
process the RESET event:

  vsock_for_each_connected_socket:
      spin_lock_bh(&vsock_table_lock) ----------- (1)
      ...
          virtio_vsock_reset_sock:
              lock_sock(sk) --------------------- (2)
      ...
      spin_unlock_bh(&vsock_table_lock)

lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".

Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
  Call trace:
   queued_spin_lock_slowpath
   vsock_remove_bound
   vsock_remove_sock
   virtio_transport_release
   __vsock_release
   vsock_release
   __sock_release
   sock_close
   __fput
   ____fput

So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.

Fixes: 0ea9e1d3 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: NStefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit dff830e5e7237a60f6c91b3f028b914a1001790f
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dff830e5e7237a60f6c91b3f028b914a1001790f

--------------------------------

[ Upstream commit 88ca2521 ]

There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq
mapping are lazily allocated in this function. The check whether the row
is already present and the row initialization is not synchronized. Two
threads can at the same time allocate a new row for evtchn_to_irq and
add the irq mapping to the their newly allocated row. One thread will
overwrite what the other has set for evtchn_to_irq[row] and therefore
the irq mapping is lost. This will trigger a BUG_ON later in
bind_evtchn_to_cpu:

  INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802
  INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002)
  INFO: nvme nvme77: 1/0/0 default/read/poll queues
  CRIT: kernel BUG at drivers/xen/events/events_base.c:427!
  WARN: invalid opcode: 0000 [#1] SMP NOPTI
  WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme]
  WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0
  WARN: Call Trace:
  WARN:  set_affinity_irq+0x121/0x150
  WARN:  irq_do_set_affinity+0x37/0xe0
  WARN:  irq_setup_affinity+0xf6/0x170
  WARN:  irq_startup+0x64/0xe0
  WARN:  __setup_irq+0x69e/0x740
  WARN:  ? request_threaded_irq+0xad/0x160
  WARN:  request_threaded_irq+0xf5/0x160
  WARN:  ? nvme_timeout+0x2f0/0x2f0 [nvme]
  WARN:  pci_request_irq+0xa9/0xf0
  WARN:  ? pci_alloc_irq_vectors_affinity+0xbb/0x130
  WARN:  queue_request_irq+0x4c/0x70 [nvme]
  WARN:  nvme_reset_work+0x82d/0x1550 [nvme]
  WARN:  ? check_preempt_wakeup+0x14f/0x230
  WARN:  ? check_preempt_curr+0x29/0x80
  WARN:  ? nvme_irq_check+0x30/0x30 [nvme]
  WARN:  process_one_work+0x18e/0x3c0
  WARN:  worker_thread+0x30/0x3a0
  WARN:  ? process_one_work+0x3c0/0x3c0
  WARN:  kthread+0x113/0x130
  WARN:  ? kthread_park+0x90/0x90
  WARN:  ret_from_fork+0x3a/0x50

This patch sets evtchn_to_irq rows via a cmpxchg operation so that they
will be set only once. The row is now cleared before writing it to
evtchn_to_irq in order to not create a race once the row is visible for
other threads.

While at it, do not require the page to be zeroed, because it will be
overwritten with -1's in clear_evtchn_to_irq_row anyway.
Signed-off-by: NMaximilian Heyne <mheyne@amazon.de>
Fixes: d0b075ff ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated")
Link: https://lore.kernel.org/r/20210812130930.127134-1-mheyne@amazon.deReviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 65395b053d03cb662e63cbf2c7e0faef8c15cb8c
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=65395b053d03cb662e63cbf2c7e0faef8c15cb8c

--------------------------------

[ Upstream commit 24d032e2 ]

The SFC_DONE register lives within the corresponding VD0/VD2/VD4/VD6
forcewake domain and is not accessible if the vdbox in that domain is
fused off and the forcewake is not initialized.

This mistake went unnoticed because until recently we were using the
wrong register offset for the SFC_DONE register; once the register
offset was corrected, we started hitting errors like

  <4> [544.989065] i915 0000:cc:00.0: Uninitialized forcewake domain(s) 0x80 accessed at 0x1ce000

on parts with fused-off vdbox engines.

Fixes: e50dbdbf ("drm/i915/tgl: Add SFC instdone to error state")
Fixes: 9c9c6d0a ("drm/i915: Correct SFC_DONE register offset")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806174130.1058960-1-matthew.d.roper@intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit c5589bb5)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[Changed Fixes tag to match the cherry-picked 82929a21]
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 4344440d91b347bd2b1c7367a7a523e1d2afd8ba
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4344440d91b347bd2b1c7367a7a523e1d2afd8ba

--------------------------------

[ Upstream commit b69dd5b3 ]

Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.

Fixes: 4a2b285e ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 696afe28dc515f3987f4dc2ad071e8fc1e058ea8
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=696afe28dc515f3987f4dc2ad071e8fc1e058ea8

--------------------------------

[ Upstream commit 6de035fe ]

Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.

The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:

  !before(rs->prior_delivered, bbr->next_rtt_delivered)

and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:

  bbr->round_start = 1;

This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.

This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.

This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.

Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control")
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Reviewed-by: NYuchung Cheng <ycheng@google.com>
Reviewed-by: NKevin Yang <yyd@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 8976606ca34714223fc0ab13b611c490a37a10c7
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8976606ca34714223fc0ab13b611c490a37a10c7

--------------------------------

[ Upstream commit 6922110d ]

After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).

It happens that the following happens:

  - the network driver (e1000e here) prepares to suspend, calls e1000e_down()
    which calls netif_carrier_off() to signal that the link is going down.
  - netif_carrier_off() adds a link_watch event to the list of events for
    this device
  - the device is completely stopped.
  - the machine suspends
  - the cable is unplugged and the machine brought to another location
  - the machine is resumed
  - the queued linkwatch events are processed for the device
  - the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
    are silently dropped
  - the device is resumed with its link down
  - the upper VLAN and bond interfaces are never notified that the link had
    been turned down and remain up
  - the only way to provoke a change is to physically connect the machine
    to a port and possibly unplug it.

The state after resume looks like this:
  $ ip -br li | egrep 'bond|eth'
  bond0            UP             e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
  eth0             DOWN           e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
  eth0.2@eth0      UP             e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>

Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.

The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.

Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.

Fixes: 124eee3f ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.euSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 4c2af90119ea5c702b6f59d8c73734da5e5b2e3a
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4c2af90119ea5c702b6f59d8c73734da5e5b2e3a

--------------------------------

[ Upstream commit 519133de ]

I got a memleak report:

BUG: memory leak
unreferenced object 0x607ee521a658 (size 240):
comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s)
hex dump (first 32 bytes, cpu 1):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693
[<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline]
[<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611
[<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline]
[<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487
[<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457
[<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550
[<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae

On error path of br_add_if(), p->mcast_stats allocated in
new_nbp() need be freed, or it will be leaked.

Fixes: 1080ab95 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit f333a5ca71c3054a2420545a200a3c80983190b8
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f333a5ca71c3054a2420545a200a3c80983190b8

--------------------------------

[ Upstream commit 45a68787 ]

Ignore fdb flags when adding port extern learn entries and always set
BR_FDB_LOCAL flag when adding bridge extern learn entries. This is
closest to the behaviour we had before and avoids breaking any use cases
which were allowed.

This patch fixes iproute2 calls which assume NUD_PERMANENT and were
allowed before, example:
$ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn

Extern learn entries are allowed to roam, but do not expire, so static
or dynamic flags make no sense for them.

Also add a comment for future reference.

Fixes: eb100e0e ("net: bridge: allow to add externally learned entries from user-space")
Fixes: 0541a629 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry")
Reviewed-by: NIdo Schimmel <idosch@nvidia.com>
Tested-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit e3b949b86d09d96d35a59ce6247054c8cd7c6c8d
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e3b949b86d09d96d35a59ce6247054c8cd7c6c8d

--------------------------------

[ Upstream commit 0541a629 ]

Currently it is possible to add broken extern_learn FDB entries to the
bridge in two ways:

1. Entries pointing towards the bridge device that are not local/permanent:

ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static

2. Entries pointing towards the bridge device or towards a port that
are marked as local/permanent, however the bridge does not process the
'permanent' bit in any way, therefore they are recorded as though they
aren't permanent:

ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent

Since commit 52e4bec1 ("net: bridge: switchdev: treat local FDBs the
same as entries towards the bridge"), these incorrect FDB entries can
even trigger NULL pointer dereferences inside the kernel.

This is because that commit made the assumption that all FDB entries
that are not local/permanent have a valid destination port. For context,
local / permanent FDB entries either have fdb->dst == NULL, and these
point towards the bridge device and are therefore local and not to be
used for forwarding, or have fdb->dst == a net_bridge_port structure
(but are to be treated in the same way, i.e. not for forwarding).

That assumption _is_ correct as long as things are working correctly in
the bridge driver, i.e. we cannot logically have fdb->dst == NULL under
any circumstance for FDB entries that are not local. However, the
extern_learn code path where FDB entries are managed by a user space
controller show that it is possible for the bridge kernel driver to
misinterpret the NUD flags of an entry transmitted by user space, and
end up having fdb->dst == NULL while not being a local entry. This is
invalid and should be rejected.

Before, the two commands listed above both crashed the kernel in this
check from br_switchdev_fdb_notify:

	struct net_device *dev = info.is_local ? br->dev : dst->dev;

info.is_local == false, dst == NULL.

After this patch, the invalid entry added by the first command is
rejected:

ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0
Error: bridge: FDB entry towards bridge must be permanent.

and the valid entry added by the second command is properly treated as a
local address and does not crash br_switchdev_fdb_notify anymore:

ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0

Fixes: eb100e0e ("net: bridge: allow to add externally learned entries from user-space")
Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 1cad01aca1fa76151a5a913d8a2d7a912425e836
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1cad01aca1fa76151a5a913d8a2d7a912425e836

--------------------------------

[ Upstream commit 21b52fed ]

rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).

When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.

Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.

Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.

Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 56cc3408ff2a601b7fb99c5831b17e8e1eee0ccd
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=56cc3408ff2a601b7fb99c5831b17e8e1eee0ccd

--------------------------------

[ Upstream commit 871a73a1 ]

rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).

When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.

Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.

Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.

Fixes: 58c59ef9 ("net: dsa: lantiq: Add Forwarding Database access")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit f7720b35cd3232de0e30ce534a6587aef1d36689
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f7720b35cd3232de0e30ce534a6587aef1d36689

--------------------------------

[ Upstream commit ada2fee1 ]

rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).

When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.

Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.

Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.

Fixes: ab335349 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 24e1b7dbb1744c9919afc2285b676300e57fa246
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=24e1b7dbb1744c9919afc2285b676300e57fa246

--------------------------------

[ Upstream commit 4a2b285e ]

Fix the data-race reported by syzbot [1]
Issue here is that igmp_ifc_timer_expire() can update in_dev->mr_ifc_count
while another change just occured from another context.

in_dev->mr_ifc_count is only 8bit wide, so the race had little
consequences.

[1]
BUG: KCSAN: data-race in igmp_ifc_event / igmp_ifc_timer_expire

write to 0xffff8881051e3062 of 1 bytes by task 12547 on cpu 0:
 igmp_ifc_event+0x1d5/0x290 net/ipv4/igmp.c:821
 igmp_group_added+0x462/0x490 net/ipv4/igmp.c:1356
 ____ip_mc_inc_group+0x3ff/0x500 net/ipv4/igmp.c:1461
 __ip_mc_join_group+0x24d/0x2c0 net/ipv4/igmp.c:2199
 ip_mc_join_group_ssm+0x20/0x30 net/ipv4/igmp.c:2218
 do_ip_setsockopt net/ipv4/ip_sockglue.c:1285 [inline]
 ip_setsockopt+0x1827/0x2a80 net/ipv4/ip_sockglue.c:1423
 tcp_setsockopt+0x8c/0xa0 net/ipv4/tcp.c:3657
 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3362
 __sys_setsockopt+0x18f/0x200 net/socket.c:2159
 __do_sys_setsockopt net/socket.c:2170 [inline]
 __se_sys_setsockopt net/socket.c:2167 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2167
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff8881051e3062 of 1 bytes by interrupt on cpu 1:
 igmp_ifc_timer_expire+0x706/0xa30 net/ipv4/igmp.c:808
 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1419
 expire_timers+0x135/0x250 kernel/time/timer.c:1464
 __run_timers+0x358/0x420 kernel/time/timer.c:1732
 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1745
 __do_softirq+0x12c/0x26e kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x9a/0xb0 kernel/softirq.c:636
 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1100
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
 console_unlock+0x8e8/0xb30 kernel/printk/printk.c:2646
 vprintk_emit+0x125/0x3d0 kernel/printk/printk.c:2174
 vprintk_default+0x22/0x30 kernel/printk/printk.c:2185
 vprintk+0x15a/0x170 kernel/printk/printk_safe.c:392
 printk+0x62/0x87 kernel/printk/printk.c:2216
 selinux_netlink_send+0x399/0x400 security/selinux/hooks.c:6041
 security_netlink_send+0x42/0x90 security/security.c:2070
 netlink_sendmsg+0x59e/0x7c0 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:703 [inline]
 sock_sendmsg net/socket.c:723 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
 ___sys_sendmsg net/socket.c:2446 [inline]
 __sys_sendmsg+0x1ed/0x270 net/socket.c:2475
 __do_sys_sendmsg net/socket.c:2484 [inline]
 __se_sys_sendmsg net/socket.c:2482 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x01 -> 0x02

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 12539 Comm: syz-executor.1 Not tainted 5.14.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.60
commit 69b13167a636c737475a749e035fa3325558a252
bugzilla: 177018 https://gitee.com/openeuler/kernel/issues/I4EAUG

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=69b13167a636c737475a749e035fa3325558a252

--------------------------------

[ Upstream commit 1090340f ]

If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked.
Fix this, by freeing sk_receive_queue in sk->sk_destruct().

syzbot report:
BUG: memory leak
unreferenced object 0xffff88810f644600 (size 232):
  comm "softirq", pid 0, jiffies 4294967032 (age 81.270s)
  hex dump (first 32 bytes):
    10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff  .}K......}K.....
    00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff  ........@|K.....
  backtrace:
    [<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496
    [<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline]
    [<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070
    [<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384
    [<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498
    [<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline]
    [<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662
    [<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline]
    [<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline]
    [<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline]
    [<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284
    [<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35
    [<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557
    [<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345
    [<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline]
    [<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235
    [<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198
    [<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline]
    [<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline]
    [<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221
    [<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295
    [<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline]
    [<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674
    [<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977
    [<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline]
    [<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline]
    [<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985

Fixes: 9ec76716 ("net: add IEEE 802.15.4 socket family implementation")
Reported-and-tested-by: syzbot+1f68113fa907bf0695a8@syzkaller.appspotmail.com
Signed-off-by: NTakeshi Misawa <jeliantsurux@gmail.com>
Acked-by: NAlexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOPSigned-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>