- 15 1月, 2014 3 次提交
-
-
由 Aruna-Hewapathirane 提交于
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: NAruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
Use skb_checksum_setup to set up partial checksum offsets rather then a private implementation. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
Use skb_checksum_setup to set up partial checksum offsets rather then a private implementation. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2014 25 次提交
-
-
由 Bjørn Mork 提交于
Commit 60e453a9 ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a9 ("USBNET: fix handling padding packet") Reported-by: NThomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Tested-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The commit c466a9b2 (net: 3com: slight optimization of addr compare) cause a warning: "passing argument 1 of 'ether_addr_equal' from incompatible pointer type", so fix it. I think julia will convert ether_addr_equal to ether_addr_equal_64bits later. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The commit 6878f79a (net: qlcnic: slight optimization of addr compare) cause a warning "sparse: incorrect type in argument 2 (different type sizes)", so fix it. I think julia will convert ether_addr_equal to ether_addr_equal_64bits later. Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
sh_eth_error() in case of a TX error tries to print a message using 2 dev_err() calls with the first string not finished by '\n', so that the resulting message would inevitably come out garbled, with something like "3net eth0: " inserted in the middle. Avoid that by merging 2 calls into one. While at it, insert an empty line after the nearby declaration. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently, the implementation is meaningless - once again, we take the slave structure and use it after we've exited RCU critical section. Fix this by removing the rcu_read_lock() from __get_active_agg(), and ensuring that all its callers are holding RCU. Fixes: be79bd04 ("bonding: add RCU for bond_3ad_state_machine_handler()") CC: dingtianhong@huawei.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently, the RCU read lock usage is just wrong - it gets the slave struct under RCU and continues to use it when RCU lock is released. However, it's still safe to do this cause we didn't need the rcu_read_lock() initially - all of the __get_first_agg() callers are either holding RCU read lock or the RTNL lock, so that we can't sync while in it. Fixes: be79bd04 ("bonding: add RCU for bond_3ad_state_machine_handler()") CC: dingtianhong@huawei.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently, its usage is just plainly wrong. It first gets a slave under RCU, and, after releasing the RCU lock, continues to use it - whilst it can be freed. Fix this by ensuring that bond_3ad_set_carrier() holds RCU till it uses its slave (or its agg). Fixes: be79bd04 ("bonding: add RCU for bond_3ad_state_machine_handler()") CC: dingtianhong@huawei.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
o Enabling BIT_9 while configuring hardware LRO allows adapter to perform LRO even if destination IP address is not programmed in adapter. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Add __QLCNIC_SRIOV_ENABLE bit check before doing SRIOV cleanup Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Refactored code to handle beaconing test for all adapters. o Use GET_LED_CONFIG mailbox command for 83xx/84xx series adapter to detect current beaconing state of the adapter. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o MAC learning will be done for SRIOV PF to help program VLAN filters onto adapter. This will help VNIC traffic to flow through without flooding traffic. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o By default, SRIOV PF will have promiscous mode on. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o On enabling VF flood bit, PF driver will be able to receive traffic from all its VFs. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Adapter should allow vlan traffic only for vlans configured on a VF. On configuring any vlan mode from VF, adapter will allow any vlan traffic to pass for that VF. Do not allow VF to configure this mode. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Fleming 提交于
10G PHYs don't currently support running the state machine, which is implicitly setup via of_phy_connect(). Therefore, it is necessary to implement an OF version of phy_attach(), which does everything except start the state machine. Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Fleming 提交于
phy_attach_direct() may now attach to a generic 10G driver. It can also be used exactly as phy_connect_direct(), which will be useful when using of_mdio, as phy_connect (and therefore of_phy_connect) start the PHY state machine, which is currently irrelevant for 10G PHYs. Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Fleming 提交于
Very incomplete, but will allow for binding an ethernet controller to it. Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shaohui Xie 提交于
Then other generic phy driver such as generic 10g phy driver can join it. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Fleming 提交于
Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Fix a bunch of whole lot of namespace issues with the Broadcom bnx2x driver found by running 'make namespacecheck' * global variables must be prefixed with bnx2x_ naming a variable int_mode, or num_queue is invitation to disaster * make local functions static * move some inline's used in one file out of header (this driver has a bad case of inline-itis) * remove resulting dead code fallout bnx2x_pfc_statistic, bnx2x_emac_get_pfc_stat bnx2x_init_vlan_mac_obj, Looks like vlan mac support in this driver was a botch from day one either never worked, or not implemented or missing support functions Compile tested only. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pankaj Dubey 提交于
If used 64 bit compiler GCC warns that: drivers/net/ethernet/smsc/smc91x.c:1897:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] This patch fixes this by changing typecast from "unsigned int" to "unsigned long" CC: "David S. Miller" <davem@davemloft.net> CC: Jingoo Han <jg1.han@samsung.com> CC: netdev@vger.kernel.org Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In order to use the native GRO handling of encapsulated protocols on mlx4, we need to call napi_gro_receive() instead of netif_receive_skb() unless busy polling is in action. While we are at it, rename mlx4_en_cq_ll_polling() to mlx4_en_cq_busy_polling() Tested with GRE tunnel : GRO aggregation is now performed on the ethernet device instead of being done later on gre device. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Jerry Chu <hkchu@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Acked-By: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
vmalloc is a limited resource. Don't use it unnecessarily. It seems this allocation should work with kcalloc. Remove unnecessary memset(,0,) of buf as it's completely overwritten as the previously only unset field in struct qlcnic_pci_func_cfg is now set to 0. Use kfree instead of vfree. Use ETH_ALEN instead of 6. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
I don't know how large "tp->vlan_shift" is but static checkers worry about shift wrapping bugs here. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2014 3 次提交
-
-
由 Veaceslav Falico 提交于
That code has been around for ages without being used. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
It's a huge mess currently, that is really hard to read. This cleanup doesn't touch the logic at all, it only breaks easy-to-fix long lines and updates comment styles. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 1月, 2014 5 次提交
-
-
由 Sabrina Dubroca 提交于
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2014 4 次提交
-
-
由 Paul Gortmaker 提交于
As of commit 7f12ad74 ("i40evf: transmit and receive functionality") the s390 builds (allyesconfig) fail with: drivers/net/ethernet/intel/i40evf/i40e_txrx.c: In function 'i40e_clean_rx_irq': drivers/net/ethernet/intel/i40evf/i40e_txrx.c:818:3: error: implicit declaration of function 'prefetch' make[5]: *** [drivers/net/ethernet/intel/i40evf/i40e_txrx.o] Error 1 due to an implicit assumption that the prototype from linux/prefetch.h will be present. Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Update the driver version to 0.3.28-k. Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Change the redundant "vsi VSI" to VSI. Change-ID: Ic16ea5820a99abc7831713cde39e7d032a7ba4d3 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
New feature: Enable PTP support in the i40e driver. Change-ID: I6a8e799f582705191f9583afb1b9231a8db96cc8 Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NMatthew Vick <matthew.vick@intel.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-