So userspace knows when this fix is available.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes SI cards running on amdgpu.

Fixes: 19290598 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Call reservation_object_reserve_shared to reserve
space for shared fence. Otherwise it will trigger
BUG_ON condition in reservation_object_add_shared_fence.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Acked-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

(v2): Return 0 and set mem->mm_node to NULL.
(v3): Use atomic64_add_return instead.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

we need register pm sysfs for virt in order
to support dpm level modification because
smu ip block will not be added under SRIOV

v2: whitespace fixes (Alex)
Signed-off-by: NYintian Tao <yttao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can't have devices that are not completely initialized in kfd topology.
Otherwise it is a race condition when user access not completely
initialized device. This also addresses a kfd_topology_add_device accessing
NULL dqm pointer issue.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move HSA_CAP_ATS_PRESENT initialization logic from kfd iommu codes to
kfd topology codes. This removes kfd_iommu_device_init's dependency
on kfd_topology_add_device. Also remove duplicate code setting the
same.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SDMA queue allocation requires the dqm lock at it modify
the global dqm members. Move up the dqm_lock so sdma
queue allocation is enclosed in the critical section. Move
mqd allocation out of critical section to avoid circular
lock dependency.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The idea to break the circular lock dependency is to move allocate_mqd
out of dqm lock protection. See callstack #1 below.

[   59.510149] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:04:00.0 on minor 0

[  513.604034] ======================================================
[  513.604205] WARNING: possible circular locking dependency detected
[  513.604375] 4.18.0-kfd-root #2 Tainted: G        W
[  513.604530] ------------------------------------------------------
[  513.604699] kswapd0/611 is trying to acquire lock:
[  513.604840] 00000000d254022e (&dqm->lock_hidden){+.+.}, at: evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.605150]
               but task is already holding lock:
[  513.605307] 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[  513.605540]
               which lock already depends on the new lock.

[  513.605747]
               the existing dependency chain (in reverse order) is:
[  513.605944]
               -> #4 (&anon_vma->rwsem){++++}:
[  513.606106]        __vma_adjust+0x147/0x7f0
[  513.606231]        __split_vma+0x179/0x190
[  513.606353]        mprotect_fixup+0x217/0x260
[  513.606553]        do_mprotect_pkey+0x211/0x380
[  513.606752]        __x64_sys_mprotect+0x1b/0x20
[  513.606954]        do_syscall_64+0x50/0x1a0
[  513.607149]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.607380]
               -> #3 (&mapping->i_mmap_rwsem){++++}:
[  513.607678]        rmap_walk_file+0x1f0/0x280
[  513.607887]        page_referenced+0xdd/0x180
[  513.608081]        shrink_page_list+0x853/0xcb0
[  513.608279]        shrink_inactive_list+0x33b/0x700
[  513.608483]        shrink_node_memcg+0x37a/0x7f0
[  513.608682]        shrink_node+0xd8/0x490
[  513.608869]        balance_pgdat+0x18b/0x3b0
[  513.609062]        kswapd+0x203/0x5c0
[  513.609241]        kthread+0x100/0x140
[  513.609420]        ret_from_fork+0x24/0x30
[  513.609607]
               -> #2 (fs_reclaim){+.+.}:
[  513.609883]        kmem_cache_alloc_trace+0x34/0x2e0
[  513.610093]        reservation_object_reserve_shared+0x139/0x300
[  513.610326]        ttm_bo_init_reserved+0x291/0x480 [ttm]
[  513.610567]        amdgpu_bo_do_create+0x1d2/0x650 [amdgpu]
[  513.610811]        amdgpu_bo_create+0x40/0x1f0 [amdgpu]
[  513.611041]        amdgpu_bo_create_reserved+0x249/0x2d0 [amdgpu]
[  513.611290]        amdgpu_bo_create_kernel+0x12/0x70 [amdgpu]
[  513.611584]        amdgpu_ttm_init+0x2cb/0x560 [amdgpu]
[  513.611823]        gmc_v9_0_sw_init+0x400/0x750 [amdgpu]
[  513.612491]        amdgpu_device_init+0x14eb/0x1990 [amdgpu]
[  513.612730]        amdgpu_driver_load_kms+0x78/0x290 [amdgpu]
[  513.612958]        drm_dev_register+0x111/0x1a0
[  513.613171]        amdgpu_pci_probe+0x11c/0x1e0 [amdgpu]
[  513.613389]        local_pci_probe+0x3f/0x90
[  513.613581]        pci_device_probe+0x102/0x1c0
[  513.613779]        driver_probe_device+0x2a7/0x480
[  513.613984]        __driver_attach+0x10a/0x110
[  513.614179]        bus_for_each_dev+0x67/0xc0
[  513.614372]        bus_add_driver+0x1eb/0x260
[  513.614565]        driver_register+0x5b/0xe0
[  513.614756]        do_one_initcall+0xac/0x357
[  513.614952]        do_init_module+0x5b/0x213
[  513.615145]        load_module+0x2542/0x2d30
[  513.615337]        __do_sys_finit_module+0xd2/0x100
[  513.615541]        do_syscall_64+0x50/0x1a0
[  513.615731]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.615963]
               -> #1 (reservation_ww_class_mutex){+.+.}:
[  513.616293]        amdgpu_amdkfd_alloc_gtt_mem+0xcf/0x2c0 [amdgpu]
[  513.616554]        init_mqd+0x223/0x260 [amdgpu]
[  513.616779]        create_queue_nocpsch+0x4d9/0x600 [amdgpu]
[  513.617031]        pqm_create_queue+0x37c/0x520 [amdgpu]
[  513.617270]        kfd_ioctl_create_queue+0x2f9/0x650 [amdgpu]
[  513.617522]        kfd_ioctl+0x202/0x350 [amdgpu]
[  513.617724]        do_vfs_ioctl+0x9f/0x6c0
[  513.617914]        ksys_ioctl+0x66/0x70
[  513.618095]        __x64_sys_ioctl+0x16/0x20
[  513.618286]        do_syscall_64+0x50/0x1a0
[  513.618476]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.618695]
               -> #0 (&dqm->lock_hidden){+.+.}:
[  513.618984]        __mutex_lock+0x98/0x970
[  513.619197]        evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.619459]        kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[  513.619710]        kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[  513.620103]        amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[  513.620363]        amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[  513.620614]        __mmu_notifier_invalidate_range_start+0x70/0xb0
[  513.620851]        try_to_unmap_one+0x7fc/0x8f0
[  513.621049]        rmap_walk_anon+0x121/0x290
[  513.621242]        try_to_unmap+0x93/0xf0
[  513.621428]        shrink_page_list+0x606/0xcb0
[  513.621625]        shrink_inactive_list+0x33b/0x700
[  513.621835]        shrink_node_memcg+0x37a/0x7f0
[  513.622034]        shrink_node+0xd8/0x490
[  513.622219]        balance_pgdat+0x18b/0x3b0
[  513.622410]        kswapd+0x203/0x5c0
[  513.622589]        kthread+0x100/0x140
[  513.622769]        ret_from_fork+0x24/0x30
[  513.622957]
               other info that might help us debug this:

[  513.623354] Chain exists of:
                 &dqm->lock_hidden --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem

[  513.623900]  Possible unsafe locking scenario:

[  513.624189]        CPU0                    CPU1
[  513.624397]        ----                    ----
[  513.624594]   lock(&anon_vma->rwsem);
[  513.624771]                                lock(&mapping->i_mmap_rwsem);
[  513.625020]                                lock(&anon_vma->rwsem);
[  513.625253]   lock(&dqm->lock_hidden);
[  513.625433]
                *** DEADLOCK ***

[  513.625783] 3 locks held by kswapd0/611:
[  513.625967]  #0: 00000000f14edf84 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
[  513.626309]  #1: 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[  513.626671]  #2: 0000000067b5cd12 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x5/0xb0
[  513.627037]
               stack backtrace:
[  513.627292] CPU: 0 PID: 611 Comm: kswapd0 Tainted: G        W         4.18.0-kfd-root #2
[  513.627632] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  513.627990] Call Trace:
[  513.628143]  dump_stack+0x7c/0xbb
[  513.628315]  print_circular_bug.isra.37+0x21b/0x228
[  513.628581]  __lock_acquire+0xf7d/0x1470
[  513.628782]  ? unwind_next_frame+0x6c/0x4f0
[  513.628974]  ? lock_acquire+0xec/0x1e0
[  513.629154]  lock_acquire+0xec/0x1e0
[  513.629357]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.629587]  __mutex_lock+0x98/0x970
[  513.629790]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630047]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630309]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630562]  evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630816]  kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[  513.631057]  kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[  513.631288]  amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[  513.631536]  amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[  513.632076]  __mmu_notifier_invalidate_range_start+0x70/0xb0
[  513.632299]  try_to_unmap_one+0x7fc/0x8f0
[  513.632487]  ? page_lock_anon_vma_read+0x68/0x250
[  513.632690]  rmap_walk_anon+0x121/0x290
[  513.632875]  try_to_unmap+0x93/0xf0
[  513.633050]  ? page_remove_rmap+0x330/0x330
[  513.633239]  ? rcu_read_unlock+0x60/0x60
[  513.633422]  ? page_get_anon_vma+0x160/0x160
[  513.633613]  shrink_page_list+0x606/0xcb0
[  513.633800]  shrink_inactive_list+0x33b/0x700
[  513.633997]  shrink_node_memcg+0x37a/0x7f0
[  513.634186]  ? shrink_node+0xd8/0x490
[  513.634363]  shrink_node+0xd8/0x490
[  513.634537]  balance_pgdat+0x18b/0x3b0
[  513.634718]  kswapd+0x203/0x5c0
[  513.634887]  ? wait_woken+0xb0/0xb0
[  513.635062]  kthread+0x100/0x140
[  513.635231]  ? balance_pgdat+0x3b0/0x3b0
[  513.635414]  ? kthread_delayed_work_timer_fn+0x80/0x80
[  513.635626]  ret_from_fork+0x24/0x30
[  513.636042] Evicting PASID 32768 queues
[  513.936236] Restoring PASID 32768 queues
[  524.708912] Evicting PASID 32768 queues
[  524.999875] Restoring PASID 32768 queues
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce a new mqd allocation interface and split the original
init_mqd function into two functions: allocate_mqd and init_mqd.
Also renamed uninit_mqd to free_mqd. This is preparation work to
fix a circular lock dependency.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is prepare work to fix a circular lock dependency.
No logic change
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also calls load_mqd with current->mm struct. The mm
struct is used to read back user wptr of the queue.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't do the same for compute queues
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

HMM provides new APIs and helps in kernel 5.2-rc1 to simplify driver
path. The old hmm APIs are deprecated and will be removed in future.

Below are changes in driver:

1. Change hmm_vma_fault to hmm_range_register and hmm_range_fault which
supports range with multiple vmas, remove the multiple vmas handle path
and data structure.
2. Change hmm_vma_range_done to hmm_range_unregister.
3. Use default flags to avoid pre-fill pfn arrays.
4. Use new hmm_device_ helpers.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The "block" variable can be set by the user through debugfs, so it can
be quite large which leads to shift wrapping here.  This means we report
a "block" as supported when it's not, and that leads to array overflows
later on.

This bug is not really a security issue in real life, because debugfs is
generally root only.

Fixes: 36ea1bd2 ("drm/amdgpu: add debugfs ctrl node")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We have the rest of the support in the kerne, but we don't actually boot KFD
on the device without this change
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For SR-IOV VF, powerplay may not be supported, in this case,
error '-EINVAL' should not be returned.
Signed-off-by: NTrigger Huang <Trigger.Huang@amd.com>
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Found issue in EDID Emulation where if we connect a display using
 a passive HDMI-DP dongle, disconnect it and then try to emulate
 a display using DP, we could not see 4K modes.  This was because
 on a disconnect, dongle_max_pix_clk was still set so when we
 emulate using DP, in dc_link_validate_mode_timing(), it would
 think we were still using a dongle and limit the modes we support.

[How]
In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect
 a hotplug out ( if new_connection_type = dc_connection_none ).
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information
Signed-off-by: NSu Sung Chung <Su.Chung@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]

The spec does not allow POST_LT_ADJ_GRANTED to be set when TPS4 is used.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We incorrectly began powering down the display at boot/resume whenever
fast boot was not possible. This should not be done in the case where there
exists a stream for the eDP since this implies that we want to turn it on.

[How]
Add check for eDP stream to decide whether to power off edp.
Signed-off-by: NSivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NReza Amini <Reza.Amini@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
By the time output csc matrix is being programmed, stream connection to
OPP has been established, but this information has not been relayed back
to HUBP.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Our existing logic in deciding whether to use RAM or ROM
depends on whether we are dealing with an identity gamma ramp.

[How]
In addition to the is_identity flag
a new is_logical_identity flag has been
added. The is_identity flag now denotes
whether the OS gamma is an RGB256 identity
and the new logical identity will inidicate
that the given gamma ramp regardless of its
type is identity.
Signed-off-by: NHarmanprit Tatla <harmanprit.tatla@amd.com>
Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.

[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.
Signed-off-by: NThomas Lim <Thomas.Lim@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently vmid is decided internally inside dc. This makes it
difficult to use vmid use with external components.

This change moves vmid logic outside dc and allowing vmid to be
passed in as a parameter to DC.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
VBios sometimes reports incorrect object type as encoder instead of
connector

[How]
Change error message to debug message
Signed-off-by: NJordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are no longer needed, Also added RESERVED bits.
Signed-off-by: NChris Park <Chris.Park@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Using this logic breaks driver unload, this is a temporary fix
a followup patch will properly fix this
Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
HPD not going to be high if Panel VDD is off
And all AUX transaction will fail :(

[How]
1. Power on VDD before attempting detection if it isn't already on
2. Improve the robustness by having a retry mechanism on the
first DPCD read after VDD on. If a particular board always holds
HPD high incorrectly, the AUX access may fail, so we can retry
in those scenarios. This change would only improve logic
since it prevents AUX failure leading to bad resolution on internal
panel.
3. We should never need to re-detect internal panel, so logic
is re-arranged a bit to skip earlier.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To prepare for the upcoming DRM plane color management properties
we need to correct a lot of wrong behavior and assumptions made for
CRTC color management.

The documentation added by this commit in amdgpu_dm_color explains
how the HW color pipeline works and its limitations with the DRM
interface.

The current implementation does the following wrong:
- Implicit sRGB DGM when no CRTC DGM is set
- Implicit sRGB RGM when no CRTC RGM is set
- No way to specify a non-linear DGM matrix that produces correct output
- No way to specify a correct RGM when a linear DGM is used

We had workarounds for passing kms_color tests but not all of the
behavior we had wrong was covered by these tests (especially when
it comes to non-linear DGM). Testing both DGM and RGM at the same time
isn't something kms_color tests well either.

[How]
The specifics for how color management works in AMDGPU and the new
behavior can be found by reading the documentation added to
amdgpu_dm_color.c from this patch.

All of the incorrect cases from the old implementation have been
addressed for the atomic interface, but there still a few TODOs for
the legacy one.

Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI.

The result looks correct from visual inspection but the CRC no longer
matches. For reference, the test was previously doing the following:

linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ...

Now the test is doing:

linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ...
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
This is meant to make it clearer that 0xf is not a valid OPP ID, and
that code making use of OPP IDs should not accept this value.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Add i2c_hw_Status check to make sure when HW i2c is in use.
2. Don't reset HW engine in is_hw_busy() and instead do this in
process_transaction() because SW i2c does not check if hw i2c is in use
Signed-off-by: NDerek Lai <Derek.Lai@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to assert just return
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement floor, ceil, and fabs
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Almost every function in DC that works with stream state expects that
the current state on the stream is the one that it should be writing
out. These functions are typically triggered by specifying a particular
stream update - but the actual contents of the stream update itself
are ignored, leaving it to the DM to actually update the stream state
itself.

The problem with doing this in DM is a matter of timing. On Linux
most of this is incorrectly done in atomic check, when we actually want
it to be done during atomic commit tail while access to DC is locked.

To give an example, a commit requesting to modify color management
state for DM could come in, be rejected, but still have modified
the actual system state for the stream since it's shared memory. The
next time color management gets programmed it'll use the rejected
color management info - which might not even still be around if it's
a custom transfer function.

So a reasonable place to perform this is within DC itself and this is
the model that's currently in use for surface updates. DC can even
compare the current system state to the incoming surface update to
determine update level, something that can't currnetly be done with the
framework for stream updates.

[How]
Duplicate the framework used for surface updates for stream updates
as well. Copy all the updates after checking the update type.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Some panels return a link rate of 0 (unknown) in DPCD 0. In this case,
an appropriate mode cannot be set, and certain panels will show
corruption as they are forced to use a mode they do not support.

[HOW]
Read DPCD 10 in the case where supported link rate from DPCD 0 is
unknown, and pass that value on to the reported link rate.
This re-introduces behaviour present in previous versions that appears
to have been accidentally removed.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>