[Why & How]
ODM seamless transitions require DIV_MODE_AUTO. However,
DIV_MODE_AUTO only works when all the horizontal timing params
are divisible by the ODM combine factor. Therefore, disable the
ODM 2:1 policy when the horizontal timing params are not divisible
by 2.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
When user unplugs mst hubs, the current code will forcefully zero
entire mst payload allocation table structure stored in link before we
deallocate actual payload when disabling stream.

During the first disable stream sequence, we will use current mst
payload allocation table to determine if link should be turned off.
Because we zero out it before we are disabling stream, the payload
allocation table stored in link doesn't represent the actual allocation status,
so we turn off link at the first disable stream without waiting until all
streams' payloads have been deallocated. This avoilates the designed
deallocation sequence and caused system hang in DP2 scenario.

[how]
Remove payload during deallocation and never zero payload allocation structure
without actually deallocating payload.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Original change 594b237b ("drm/amd/display: Add
interface to track PHY state") was implemented by assuming stream's
dpms off is equivalent to PHY power off.
This assumption doesn't hold in following situations:
1. MST multiple stream scenario, where multiple streams are sharing the
same PHY output. Toggle dpms off for one of the stream doesn't power
off the PHY due to the presence of other streams.
2. enable stream failure scenario, where enable stream fails due to
failure of link training. This will cause DPMS off is set to false, while
the actual PHY power state is off in certain cases.
Due to the problematic assumption, the logic will skip disabling
other streams for MST multiple stream scenario, therefore PHY is
not actually powered off.

[how]
1. Rework this refactor by moving PHY state update down to hardware
level, where we update PHY state in place when hardware sequencer
is actually changing the power state of the PHY hardware.
2. Reimplement symclk on TX off workaround in place when we are actually
calling transmitter control to power off PHY in dcn32. Note the workaround is
added due to the lack of proper software interface to set TX while keeping
symclk on. We plan to address this interface problem so we can set TX off
only without affecting symclk in future dcn versions.

Fixes: 594b237b ("drm/amd/display: Add interface to track PHY state")
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.

[HOW]
Override internal repeater count if fixed_vs flag is set for a given link
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Correctly set ddr5 channel width to 8 bytes
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why and How]
- Only consider pixel rate div policy for DCN32+
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Added logs for panel delays, spread_spectrum_percentage,
and gpuclk_ss_percentage to facilitate debugging.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NLeo Chen <sancchen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Support dramclk change latency change via debug option and add some
code isolation.
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
- Pipe split prediction previously only took into
account MPC split. We must also consider when
ODM combine is required, and when we apply ODM
combine by policy.

- Also re-work DET allocation function as it wasn't
properly splitting the DET per stream, per plane.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
After reg offset initialization was switched to runtime rather than
compile time, some of the defintions are not needed anymore and can
be removed.
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
420 modes are limited by FMT buffer width of 4096
which requires multi-pipe support in form of ODM
combine.  If 420 modes have greater HActive than
4096, the DML logic should accomodate whether
it should be rejected, or ODM combine 2:1 or 4:1
is triggered accordingly.

[How]
FMT Buffer limit of 4096 in DCN32. Force ODM
combine depending on HActive and FMT Buffer limit.
Reject modes if TMDS 420 and above 4096.
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NChris Park <chris.park@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2182Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2181Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2180Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2179Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2177Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c:729:63-68:
WARNING: conversion to bool not needed here

Generated by: scripts/coccinelle/misc/boolconv.cocci
Signed-off-by: NYihao Han <hanyihao@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/display: make optc32_phantom_crtc_post_enable, optc32_setup_manual_trigger and optc32_set_drr static

These three functions are not used outside the function
dcn32_optc.c, so the modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:159:6: warning: no previous prototype for function 'optc32_phantom_crtc_post_enable'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:218:6: warning: no previous prototype for ‘optc32_set_drr’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:193:6: warning: no previous prototype for ‘optc32_setup_manual_trigger’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2140Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These functions are not used outside the file dcn32_dccg.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2142Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:912:6: warning: no previous prototype for ‘hubbub32_force_wm_propagate_to_pipes’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:823:6: warning: no previous prototype for ‘hubbub32_wm_read_state’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:772:6: warning: no previous prototype for ‘hubbub32_init_watermarks’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:712:6: warning: no previous prototype for ‘hubbub32_force_usr_retraining_allow’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2141Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This symbol is not used outside of dcn32_mmhubbub.c, so marks it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:103:6: warning: no previous prototype for ‘mmhubbub32_config_mcif_buf’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2145Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2144Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This symbol is not used outside of dcn314_optc.c, so marks it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:153:6: warning: no previous prototype for ‘optc314_phantom_crtc_post_enable’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2147Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This symbol is not used outside of dcn314_dio_stream_encoder.c, so marks
it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dio_stream_encoder.c:84:6: warning: no previous prototype for ‘enc314_stream_encoder_dvi_set_stream_attribute’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2146Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These functions are not used outside the file dcn30_resource.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2143Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function copy_stream_update_to_stream() is defined in the notif.c
file, but not called elsewhere, so delete this unused function.

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2852:6: warning: no previous prototype for ‘dc_reset_state’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2113Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These two functions are not used outside the function dcn32_mpc.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:704:6: warning: no previous prototype for ‘mpc32_program_shaper’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:900:6: warning: no previous prototype for ‘mpc32_program_3dlut’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2115Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/display: make dcn32_link_encoder_is_in_alt_mode and dcn32_link_encoder_get_max_link_cap static

These two functions are not used outside the function
dcn32_dio_link_encoder.c, so the modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_link_encoder.c:121:6: warning: no previous prototype for ‘dcn32_link_encoder_is_in_alt_mode’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_link_encoder.c:136:6: warning: no previous prototype for ‘dcn32_link_encoder_get_max_link_cap’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2117Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This symbol is not used outside of dcn32_dpp.c, so marks it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dpp.c:34:6: warning: no previous prototype for ‘dscl32_calc_lb_num_partitions’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2118Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This symbol is not used outside of dcn32_dio_stream_encoder.c, so marks
it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_stream_encoder.c:63:6: warning: no previous prototype for ‘enc32_stream_encoder_dvi_set_stream_attribute’.

Link:https://bugzilla.openanolis.cn/show_bug.cgi?id=2119Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This function consumes a lot of stack space and it blows up the size of
dml30_ModeSupportAndSystemConfigurationFull() with clang:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
       ^
  1 error generated.

Commit a0f7e7f7 ("drm/amd/display: fix i386 frame size warning")
aimed to address this for i386 but it did not help x86_64.

To reduce the amount of stack space that
dml30_ModeSupportAndSystemConfigurationFull() uses, mark
UseMinimumDCFCLK() as noinline, using the _for_stack variant for
documentation. While this will increase the total amount of stack usage
between the two functions (1632 and 1304 bytes respectively), it will
make sure both stay below the limit of 2048 bytes for these files. The
aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage
so it should not be reverted in favor of this change.

Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: N"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: NMaíra Canal <mairacanal@riseup.net>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
      ^
  1 error generated.

Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: N"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: NMaíra Canal <mairacanal@riseup.net>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()

Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
      ^
  1 error generated.

Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: N"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: NMaíra Canal <mairacanal@riseup.net>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Several of the arguments are identical between the two call sites and
they can be accessed through the 'struct vba_vars_st' pointer. This
reduces the total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with
LLVM 16 (1936 -> 1728), helping clear up the following clang warning:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
       ^
  1 error generated.

Additionally, while modifying the arguments to
dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v'
mixed with 'mode_lib->vba'.

Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: N"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: NMaíra Canal <mairacanal@riseup.net>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()

Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer created at the
top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the
total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with
LLVM 16 (2152 -> 1936), helping clear up the following clang warning:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
       ^
  1 error generated.

Additionally, while modifying the arguments to
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v'
consistently, instead of 'v' mixed with 'mode_lib->vba'.

Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: N"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: NMaíra Canal <mairacanal@riseup.net>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:

*Fixed register definitions for DCN32/321
*Adding log for spread_spectrum_info
*Reverted DSC programming sequence change
*Correct I2C register offset
*Updated DCN30 header files, viewport position for phantom pipes
*Enable dlg and vba compilation for dcn314
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Fix the instatiation sequence for MPC registers and add a few other
missing register definitions that were ommited erroneously when copying
them over to enable runtime initialization of reigster offsets for
DCN32/321
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Refactor calculation to remove floating point operations from dmub_srv.
To ensure that 32-bit compilation works well, we use the div64 family of
macros to do integer division for SubVP-related timing parameters.

Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Magali Lemes <magalilemes00@gmail.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NSamson Tam <Samson.Tam@amd.com>
Acked-by: NTom Chung <chiahsuan.chung@amd.com>
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Co-developed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Co-developed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Call commit_minimal_transition_state wrongly in case of surface_count
equal to 0.

[how]
Add a condition to filter case of surface_count equal to 0.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: NJeromeHong <jerome.hong@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Do not need to spend time reprogramming DRR if there were no updates to
the parameters.

[how]
Compare the current stream state to the requested one to determine if an
update is required.

In amdgpu_dm the timing_changed flag is set but never used so can remove it.
Similarly, the stream update for VRR is done after dc_commit and should
not update its adjust field until after the update is completed.  The
adjust field is managed by dc_stream_adjust_vmin_vmax and should not be
manually updated in amdgpu_dm.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>