Some callers of pm_runtime_get_sync() and other runtime PM helper
functions, scsi_autopm_get_host() and scsi_autopm_get_device() in
particular, need to distinguish error codes returned when runtime PM
is disabled (i.e. power.disable_depth is nonzero for the given
device) from error codes returned in other situations.  For this
reason, make the runtime PM helper functions return -EACCES when
power.disable_depth is nonzero and ensure that this error code
won't be returned by them in any other circumstances.  Modify
scsi_autopm_get_host() and scsi_autopm_get_device() to check the
error code returned by pm_runtime_get_sync() and ignore -EACCES.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The common PM clock management functions may be used for system
suspend/resume as well as for runtime PM, so rename them
accordingly.  Modify kerneldoc comments describing these functions
and kernel messages printed by them, so that they refer to power
management in general rather that to runtime PM.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NKevin Hilman <khilman@ti.com>

The common clocks management code in drivers/base/power/clock_ops.c
is going to be used during system-wide power transitions as well as
for runtime PM, so it shouldn't depend on CONFIG_PM_RUNTIME.
However, the suspend/resume functions provided by it for
CONFIG_PM_RUNTIME unset, to be used during system-wide power
transitions, should not behave in the same way as their counterparts
defined for CONFIG_PM_RUNTIME set, because in that case the clocks
are managed differently at run time.

The names of the functions still contain the word "runtime" after
this change, but that is going to be modified by a separate patch
later.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NKevin Hilman <khilman@ti.com>

There is the problem how to handle devices set up to wake up the
system from sleep states during system-wide power transitions.
In some cases, those devices can be turned off entirely, because the
wakeup signals will be generated on their behalf anyway.  In some
other cases, they will generate wakeup signals if their clocks are
stopped, but only if power is not removed from them.  Finally, in
some cases, they can only generate wakeup signals if power is not
removed from them and their clocks are enabled.

To allow platform-specific code to decide whether or not to put
wakeup devices (and their PM domains) into low-power state during
system-wide transitions, such as system suspend, introduce a new
generic PM domain callback, .active_wakeup(), that will be used
during the "noirq" phase of system suspend and hibernation (after
image creation) to decide what to do with wakeup devices.
Specifically, if this callback is present and returns "true", the
generic PM domain code will not execute .stop_device() for the
given wakeup device and its PM domain won't be powered off.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NKevin Hilman <khilman@ti.com>

Make generic PM domains support system-wide power transitions
(system suspend and hibernation).  Add suspend, resume, freeze, thaw,
poweroff and restore callbacks to be associated with struct
generic_pm_domain objects and make pm_genpd_init() use them as
appropriate.

The new callbacks do nothing for devices belonging to power domains
that were powered down at run time (before the transition).  For the
other devices the action carried out depends on the type of the
transition.  During system suspend the power domain .suspend()
callback executes pm_generic_suspend() for the device, while the
PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq()
for it, stops it and eventually removes power from the PM domain it
belongs to (after all devices in the domain have been stopped and its
subdomains have been powered off).

During system resume the PM domain .resume_noirq() callback
restores power to the PM domain (when executed for it first time),
starts the device and executes pm_generic_resume_noirq() for it,
while the .resume() callback executes pm_generic_resume() for the
device.  Finally, the .complete() callback executes pm_runtime_idle()
for the device which should put it back into the suspended state if
its runtime PM usage count is equal to zero at that time.

The actions carried out during hibernation and resume from it are
analogous to the ones described above.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NKevin Hilman <khilman@ti.com>

There is some code in drivers/base/power/domain.c that will be useful
for both runtime PM and system-wide power transitions, so make it
depend on CONFIG_PM instead of CONFIG_PM_RUNTIME.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NKevin Hilman <khilman@ti.com>

Introduce generic "noirq" power management callback routines for
subsystems in addition to the "regular" generic PM callback routines.

The new routines will be used, among other things, for implementing
system-wide PM transitions support for generic PM domains.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Introduce common headers, helper functions and callbacks allowing
platforms to use simple generic power domains for runtime power
management.

Introduce struct generic_pm_domain to be used for representing
power domains that each contain a number of devices and may be
parent domains or subdomains with respect to other power domains.
Among other things, this structure includes callbacks to be
provided by platforms for performing specific tasks related to
power management (i.e. ->stop_device() may disable a device's
clocks, while ->start_device() may enable them, ->power_off() is
supposed to remove power from the entire power domain
and ->power_on() is supposed to restore it).

Introduce functions that can be used as power domain runtime PM
callbacks, pm_genpd_runtime_suspend() and pm_genpd_runtime_resume(),
as well as helper functions for the initialization of a power
domain represented by a struct generic_power_domain object,
adding a device to or removing a device from it and adding or
removing subdomains.

Introduce configuration option CONFIG_PM_GENERIC_DOMAINS to be
selected by the platforms that want to use the new code.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: NKevin Hilman <khilman@ti.com>

The naming convention used by commit 7538e3db6e015e890825fbd9f86599b
(PM: Add support for device power domains), which introduced the
struct dev_power_domain type for representing device power domains,
evidently confuses some developers who tend to think that objects
of this type must correspond to "power domains" as defined by
hardware, which is not the case.  Namely, at the kernel level, a
struct dev_power_domain object can represent arbitrary set of devices
that are mutually dependent power management-wise and need not belong
to one hardware power domain.  To avoid that confusion, rename struct
dev_power_domain to struct dev_pm_domain and rename the related
pointers in struct device and struct pm_clk_notifier_block from
pwr_domain to pm_domain.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NKevin Hilman <khilman@ti.com>

Commit 85eb8c8d (PM / Runtime:
Generic clock manipulation rountines for runtime PM (v6)) converted
the shmobile platform to using generic code for runtime PM clock
management, but it changed the behavior for CONFIG_PM_RUNTIME unset
incorrectly.

Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify()
should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and
it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER
(instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE,
respectively).  Make this function behave as appropriate.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NMagnus Damm <damm@opensource.se>

The PM core doesn't handle suspend failures correctly when it comes to
asynchronously suspended devices.  These devices are moved onto the
dpm_suspended_list as soon as the corresponding async thread is
started up, and they remain on the list even if they fail to suspend
or the sleep transition is cancelled before they get suspended.  As a
result, when the PM core unwinds the transition, it tries to resume
the devices even though they were never suspended.

This patch (as1474) fixes the problem by adding a new "is_suspended"
flag to dev_pm_info.  Devices are resumed only if the flag is set.

[rjw:
 * Moved the dev->power.is_suspended check into device_resume(),
   because we need to complete dev->power.completion and clear
   dev->power.is_prepared too for devices whose
   dev->power.is_suspended flags are unset.
 * Fixed __device_suspend() to avoid setting dev->power.is_suspended
   if async_error is different from zero.]
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org

This patch (as1473) renames the "in_suspend" field in struct
dev_pm_info to "is_prepared", in preparation for an upcoming change.
The new name is more descriptive of what the field really means.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org

The loops over connection ID strings in pm_runtime_clk_notify()
should actually iterate over the strings and not over the elements
of the first of them, so make them behave as appropriate.

This fixes a regression introduced by commit 600b776e
(OMAP1 / PM: Use generic clock manipulation routines for runtime PM).
Reported-and-tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This reverts 737a3bb9 ("Driver core: move platform device
creation helpers to .init.text (if MODULE=n)").  That patch assumed that
platform_device_register_resndata() is only ever called from __init code
but that isn't true in the case ioctl->drm_ioctl->radeon_cp_init().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35192

Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: NAnthony Basile <blueness@gentoo.org>
Cc: Greg KH <gregkh@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

commit 2ac39037 ("writeback: add
/sys/devices/system/node/<node>/vmstat") added vmstat entry.  But
strangely it only show nr_written and nr_dirtied.

        # cat /sys/devices/system/node/node20/vmstat
        nr_written 0
        nr_dirtied 0

Of course, It's not adequate.  With this patch, the vmstat show all vm
stastics as /proc/vmstat.

        # cat /sys/devices/system/node/node0/vmstat
	nr_free_pages 899224
	nr_inactive_anon 201
	nr_active_anon 17380
	nr_inactive_file 31572
	nr_active_file 28277
	nr_unevictable 0
	nr_mlock 0
	nr_anon_pages 17321
	nr_mapped 8640
	nr_file_pages 60107
	nr_dirty 33
	nr_writeback 0
	nr_slab_reclaimable 6850
	nr_slab_unreclaimable 7604
	nr_page_table_pages 3105
	nr_kernel_stack 175
	nr_unstable 0
	nr_bounce 0
	nr_vmscan_write 0
	nr_writeback_temp 0
	nr_isolated_anon 0
	nr_isolated_file 0
	nr_shmem 260
	nr_dirtied 1050
	nr_written 938
	numa_hit 962872
	numa_miss 0
	numa_foreign 0
	numa_interleave 8617
	numa_local 962872
	numa_other 0
	nr_anon_transparent_hugepages 0

[akpm@linux-foundation.org: no externs in .c files]
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce generic .prepare() and .complete() power management
callbacks, currently missing, that can be used by subsystems and
power domains and export them.  Provide NULL definitions of all
the generic system sleep callbacks for CONFIG_PM_SLEEP unset.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

If device drivers allocate substantial amounts of memory (above 1 MB)
in their hibernate .freeze() callbacks (or in their legacy suspend
callbcks during hibernation), the subsequent creation of hibernate
image may fail due to the lack of memory.  This is the case, because
the drivers' .freeze() callbacks are executed after the hibernate
memory preallocation has been carried out and the preallocated amount
of memory may be too small to cover the new driver allocations.
Unfortunately, the drivers' .prepare() callbacks also are executed
after the hibernate memory preallocation has completed, so they are
not suitable for allocating additional memory either.  Thus the only
way a driver can safely allocate memory during hibernation is to use
a hibernate/suspend notifier.  However, the notifiers are called
before the freezing of user space and the drivers wanting to use them
for allocating additional memory may not know how much memory needs
to be allocated at that point.

To let device drivers overcome this difficulty rework the hibernation
sequence so that the memory preallocation is carried out after the
drivers' .prepare() callbacks have been executed, so that the
.prepare() callbacks can be used for allocating additional memory
to be used by the drivers' .freeze() callbacks.  Update documentation
to match the new behavior of the code.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Now that we have CONFIG_DYNAMIC_DEBUG there is no need for yet
another flag causing dev_dbg() and pr_debug() statements in the
core PM code to produce output.  Moreover, CONFIG_PM_VERBOSE
causes so much output to be generated that it's not really useful
and almost no one sets it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=23182Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

wakeup_source_add() adds an item into wakeup_sources list.

There is no need to call synchronize_rcu() at this point.

Its only needed in wakeup_source_remove()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The "wakeup" device sysfs file is only created if CONFIG_PM_SLEEP
is set, so put it under CONFIG_PM_SLEEP and make a build warning
related to it go away.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some drivers erroneously use request_firmware() from their ->resume()
(or ->thaw(), or ->restore()) callbacks, which is not going to work
unless the firmware has been built in.  This causes system resume to
stall until the firmware-loading timeout expires, which makes users
think that the resume has failed and reboot their machines
unnecessarily.  For this reason, make _request_firmware() print a
warning and return immediately with error code if it has been called
when tasks are frozen and it's impossible to start any new usermode
helpers.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>

The driver core tries to prevent race conditions between runtime PM
and driver removal from happening by incrementing the runtime PM
usage counter of the device and executing pm_runtime_barrier() before
running the bus notifier and the ->remove() callbacks provided by the
device's subsystem or driver.  This guarantees that, if a future
runtime suspend of the device has been scheduled or a runtime resume
or idle request has been queued up right before the driver removal,
it will be canceled or waited for to complete and no other
asynchronous runtime suspend or idle requests for the device will be
put into the PM workqueue until the ->remove() callback returns.
However, it doesn't prevent resume requests from being queued up
after pm_runtime_barrier() has been called and it doesn't prevent
pm_runtime_resume() from executing the device subsystem's runtime
resume callback.  Morever, it prevents the device's subsystem or
driver from putting the device into the suspended state by calling
pm_runtime_suspend() from its ->remove() routine.  This turns out to
be a major inconvenience for some subsystems and drivers that want to
leave the devices they handle in the suspended state.

To really prevent runtime PM callbacks from racing with the bus
notifier callback in __device_release_driver(), which is necessary,
because the notifier is used by some subsystems to carry out
operations affecting the runtime PM functionality, use
pm_runtime_get_sync() instead of the combination of
pm_runtime_get_noresume() and pm_runtime_barrier().  This will resume
the device if it's in the suspended state and will prevent it from
being suspended again until pm_runtime_put_*() is called.

To allow subsystems and drivers to put devices into the suspended
state by calling pm_runtime_suspend() from their ->remove() routines,
execute pm_runtime_put_sync() after running the bus notifier in
__device_release_driver().  This will require subsystems and drivers
to make their ->remove() callbacks avoid races with runtime PM
directly, but it will allow of more flexibility in the handling of
devices during the removal of their drivers.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Fix a build issue in drivers/base/power/clock_ops.c occuring when
CONFIG_PM_RUNTIME is not set.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The platform_bus_set_pm_ops() operation is deprecated in favor of the
new device power domain infrastructre implemented in commit
7538e3db (PM: add support for device
power domains)
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION"

drivers/base/memory.c: In function 'memory_block_change_state':
drivers/base/memory.c:281: warning: unused variable 'i'

less beer, more testing

Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On ppc64 the minimum memory section for hotplug is 16MB but most
recent machines have a memory block size of 256MB. This means
memory_block_change_state does 16 separate calls to
memory_section_action.

This also means we call the notifiers 16 times and the hook
in the ehea network driver is quite costly. To offline one 256MB
region takes:

# time echo offline > /sys/devices/system/memory/memory32/state
7.9s

This patch removes the loop and calls online_pages or
remove_memory once for the entire region and in doing so makes
the logic simpler since we don't have to back out if things fail
part way through.

The same test to offline one region now takes:

# time echo online > /sys/devices/system/memory/memory32/state
0.67s

Over 11 times faster.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Since suspend, resume and shutdown operations in struct sysdev_class
and struct sysdev_driver are not used any more, remove them.  Also
drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used
for executing those operations and modify all of their users
accordingly.  This reduces kernel code size quite a bit and reduces
its complexity.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

Many different platforms and subsystems may want to disable device
clocks during suspend and enable them during resume which is going to
be done in a very similar way in all those cases.  For this reason,
provide generic routines for the manipulation of device clocks during
suspend and resume.

Convert the ARM shmobile platform to using the new routines.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Once shmobile platforms have been converted to using power domains
for overriding the platform bus type's PM callbacks, it isn't
necessary to use the __weakly defined wrappers around the generinc
runtime PM callbacks in the platform bus type any more.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Export the default PM callbacks defined for the platform bus type so
that they can be used by power domains for suspending and resuming
platform devices in the future.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Change the PM core's behavior related to power domains in such a way
that, if a power domain is defined for a given device, its callbacks
will be executed instead of and not in addition to the device
subsystem's PM callbacks.

The idea behind the initial implementation of power domains handling
by the PM core was that power domain callbacks would be executed in
addition to subsystem callbacks, so that it would be possible to
extend the subsystem callbacks by using power domains.  It turns out,
however, that this wouldn't be really convenient in some important
situations.

For example, there are systems in which power can only be removed
from entire power domains.  On those systems it is not desirable to
execute device drivers' PM callbacks until it is known that power is
going to be removed from the devices in question, which means that
they should be executed by power domain callbacks rather then by
subsystem (e.g. bus type) PM callbacks, because subsystems generally
have no information about what devices belong to which power domain.
Thus, for instance, if the bus type in question is the platform bus
type, its PM callbacks generally should not be called in addition to
power domain callbacks, because they run device drivers' callbacks
unconditionally if defined.

While in principle the default subsystem PM callbacks, or a subset of
them, may be replaced with different functions, it doesn't seem
correct to do so, because that would change the subsystem's behavior
with respect to all devices in the system, regardless of whether or
not they belong to any power domains.  Thus, the only remaining
option is to make power domain callbacks take precedence over
subsystem callbacks.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NKevin Hilman <khilman@ti.com>

It turns out that some PCI devices are only found to be
wakeup-capable during registration, in which case, when
device_set_wakeup_capable() is called, device_is_registered() already
returns 'true' for the given device, but dpm_sysfs_add() hasn't been
called for it yet.  This leads to situations in which the device's
power.can_wakeup flag is not set as requested because of failing
wakeup_sysfs_add() and its wakeup-related sysfs files are not
created, although they should be present.  This is a post-2.6.38
regression introduced by commit cb8f51bd
(PM: Do not create wakeup sysfs files for devices that cannot wake
up).

To work around this problem initialize the device's power.entry
field to an empty list head and make device_set_wakeup_capable()
check if it is still empty before attempting to add the devices
wakeup-related sysfs files with wakeup_sysfs_add().  Namely, if
power.entry is still empty at this point, device_pm_add() hasn't been
called yet for the device and its wakeup-related files will be
created later, so device_set_wakeup_capable() doesn't have to create
them.
Reported-and-tested-by: NTino Keitel <tino.keitel@tikei.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the line longer than 80 of memory_uevent function .
Signed-off-by: NWanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Before commit

	b4028437 (Driver core: move dev_get/set_drvdata to drivers/base/dd.c)

calling dev_set_drvdata with dev=NULL was an unchecked error. After some
discussion about what to return in this case removing the check (and so
producing a null pointer exception) seems fine.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reviewed-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This makes the res = NULL case more consistant to the res != NULL case
as now both overwrite pdev->resource.
Reviewed-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reviewed-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This makes the data = NULL case more consistent to the data != NULL case.
The functional change is that now

	platform_device_add_data(somepdev, NULL, somesize)

sets pdev->dev.platform_data to NULL instead of not touching it.
Reviewed-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixed brace coding style issue.
Signed-off-by: NKarthigan Srinivasan <karthigan.srinivasan@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When a device is registered to a bus it will be a) added to the list
of devices of the bus and b) bind to a driver (if one matches). As a
result of a driver being registered at this bus between a) and b) this
device could already be bound to a driver. This leads to a warning
and incorrect refcounting.
To fix this add a check to device_attach to identify an already bound
device.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>