1. 25 8月, 2016 1 次提交
  2. 28 6月, 2016 1 次提交
  3. 27 4月, 2016 1 次提交
  4. 22 4月, 2016 1 次提交
  5. 16 4月, 2016 1 次提交
    • X
      sctp: export some functions for sctp_diag in inet_diag · cb2050a7
      Xin Long 提交于
      inet_diag_msg_common_fill is used to fill the diag msg common info,
      we need to use it in sctp_diag as well, so export it.
      
      inet_diag_msg_attrs_fill is used to fill some common attrs info between
      sctp diag and tcp diag.
      
      v2->v3:
      - do not need to define and export inet_diag_get_handler any more.
        cause all the functions in it are in sctp_diag.ko, we just call
        them in sctp_diag.ko.
      
      - add inet_diag_msg_attrs_fill to make codes clear.
      Signed-off-by: NXin Long <lucien.xin@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cb2050a7
  6. 05 4月, 2016 2 次提交
    • E
      tcp/dccp: do not touch listener sk_refcnt under synflood · 3b24d854
      Eric Dumazet 提交于
      When a SYNFLOOD targets a non SO_REUSEPORT listener, multiple
      cpus contend on sk->sk_refcnt and sk->sk_wmem_alloc changes.
      
      By letting listeners use SOCK_RCU_FREE infrastructure,
      we can relax TCP_LISTEN lookup rules and avoid touching sk_refcnt
      
      Note that we still use SLAB_DESTROY_BY_RCU rules for other sockets,
      only listeners are impacted by this change.
      
      Peak performance under SYNFLOOD is increased by ~33% :
      
      On my test machine, I could process 3.2 Mpps instead of 2.4 Mpps
      
      Most consuming functions are now skb_set_owner_w() and sock_wfree()
      contending on sk->sk_wmem_alloc when cooking SYNACK and freeing them.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3b24d854
    • E
      tcp/dccp: use rcu locking in inet_diag_find_one_icsk() · 2d331915
      Eric Dumazet 提交于
      RX packet processing holds rcu_read_lock(), so we can remove
      pairs of rcu_read_lock()/rcu_read_unlock() in lookup functions
      if inet_diag also holds rcu before calling them.
      
      This is needed anyway as __inet_lookup_listener() and
      inet6_lookup_listener() will soon no longer increment
      refcount on the found listener.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2d331915
  7. 15 3月, 2016 1 次提交
  8. 11 2月, 2016 1 次提交
  9. 21 1月, 2016 1 次提交
  10. 16 12月, 2015 2 次提交
  11. 03 10月, 2015 2 次提交
    • E
      tcp/dccp: install syn_recv requests into ehash table · 079096f1
      Eric Dumazet 提交于
      In this patch, we insert request sockets into TCP/DCCP
      regular ehash table (where ESTABLISHED and TIMEWAIT sockets
      are) instead of using the per listener hash table.
      
      ACK packets find SYN_RECV pseudo sockets without having
      to find and lock the listener.
      
      In nominal conditions, this halves pressure on listener lock.
      
      Note that this will allow for SO_REUSEPORT refinements,
      so that we can select a listener using cpu/numa affinities instead
      of the prior 'consistent hash', since only SYN packets will
      apply this selection logic.
      
      We will shrink listen_sock in the following patch to ease
      code review.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Ying Cai <ycai@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      079096f1
    • E
      tcp: move qlen/young out of struct listen_sock · aac065c5
      Eric Dumazet 提交于
      qlen_inc & young_inc were protected by listener lock,
      while qlen_dec & young_dec were atomic fields.
      
      Everything needs to be atomic for upcoming lockless listener.
      
      Also move qlen/young in request_sock_queue as we'll get rid
      of struct listen_sock eventually.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      aac065c5
  12. 11 7月, 2015 1 次提交
    • P
      net: inet_diag: always export IPV6_V6ONLY sockopt for listening sockets · 8220ea23
      Phil Sutter 提交于
      Reconsidering my commit 20462155 "net: inet_diag: export IPV6_V6ONLY
      sockopt", I am not happy with the limitations it causes for socket
      analysing code in userspace. Exporting the value only if it is set makes
      it hard for userspace to decide whether the option is not set or the
      kernel does not support exporting the option at all.
      
      >From an auditor's perspective, the interesting question for listening
      AF_INET6 sockets is: "Does it NOT have IPV6_V6ONLY set?" Because it is
      the unexpected case. This patch allows to answer this question reliably.
      Signed-off-by: NPhil Sutter <phil@nwl.cc>
      Cc: Eric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8220ea23
  13. 24 6月, 2015 1 次提交
  14. 23 6月, 2015 1 次提交
  15. 22 6月, 2015 1 次提交
  16. 16 6月, 2015 2 次提交
  17. 30 4月, 2015 1 次提交
  18. 18 4月, 2015 1 次提交
    • E
      inet_diag: fix access to tcp cc information · 521f1cf1
      Eric Dumazet 提交于
      Two different problems are fixed here :
      
      1) inet_sk_diag_fill() might be called without socket lock held.
         icsk->icsk_ca_ops can change under us and module be unloaded.
         -> Access to freed memory.
         Fix this using rcu_read_lock() to prevent module unload.
      
      2) Some TCP Congestion Control modules provide information
         but again this is not safe against icsk->icsk_ca_ops
         change and nla_put() errors were ignored. Some sockets
         could not get the additional info if skb was almost full.
      
      Fix this by returning a status from get_info() handlers and
      using rcu protection as well.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      521f1cf1
  19. 14 4月, 2015 1 次提交
    • E
      tcp/dccp: get rid of central timewait timer · 789f558c
      Eric Dumazet 提交于
      Using a timer wheel for timewait sockets was nice ~15 years ago when
      memory was expensive and machines had a single processor.
      
      This does not scale, code is ugly and source of huge latencies
      (Typically 30 ms have been seen, cpus spinning on death_lock spinlock.)
      
      We can afford to use an extra 64 bytes per timewait sock and spread
      timewait load to all cpus to have better behavior.
      
      Tested:
      
      On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1
      on the target (lpaa24)
      
      Before patch :
      
      lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
      419594
      
      lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
      437171
      
      While test is running, we can observe 25 or even 33 ms latencies.
      
      lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23
      ...
      1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms
      rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2
      
      lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23
      ...
      1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms
      rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2
      
      After patch :
      
      About 90% increase of throughput :
      
      lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
      810442
      
      lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
      800992
      
      And latencies are kept to minimal values during this load, even
      if network utilization is 90% higher :
      
      lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23
      ...
      1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms
      rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      789f558c
  20. 24 3月, 2015 1 次提交
  21. 21 3月, 2015 1 次提交
    • E
      inet: get rid of central tcp/dccp listener timer · fa76ce73
      Eric Dumazet 提交于
      One of the major issue for TCP is the SYNACK rtx handling,
      done by inet_csk_reqsk_queue_prune(), fired by the keepalive
      timer of a TCP_LISTEN socket.
      
      This function runs for awful long times, with socket lock held,
      meaning that other cpus needing this lock have to spin for hundred of ms.
      
      SYNACK are sent in huge bursts, likely to cause severe drops anyway.
      
      This model was OK 15 years ago when memory was very tight.
      
      We now can afford to have a timer per request sock.
      
      Timer invocations no longer need to lock the listener,
      and can be run from all cpus in parallel.
      
      With following patch increasing somaxconn width to 32 bits,
      I tested a listener with more than 4 million active request sockets,
      and a steady SYNFLOOD of ~200,000 SYN per second.
      Host was sending ~830,000 SYNACK per second.
      
      This is ~100 times more what we could achieve before this patch.
      
      Later, we will get rid of the listener hash and use ehash instead.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fa76ce73
  22. 19 3月, 2015 1 次提交
  23. 17 3月, 2015 1 次提交
  24. 15 3月, 2015 3 次提交
  25. 14 3月, 2015 1 次提交
  26. 13 3月, 2015 2 次提交
  27. 12 3月, 2015 1 次提交
    • E
      net: add real socket cookies · 33cf7c90
      Eric Dumazet 提交于
      A long standing problem in netlink socket dumps is the use
      of kernel socket addresses as cookies.
      
      1) It is a security concern.
      
      2) Sockets can be reused quite quickly, so there is
         no guarantee a cookie is used once and identify
         a flow.
      
      3) request sock, establish sock, and timewait socks
         for a given flow have different cookies.
      
      Part of our effort to bring better TCP statistics requires
      to switch to a different allocator.
      
      In this patch, I chose to use a per network namespace 64bit generator,
      and to use it only in the case a socket needs to be dumped to netlink.
      (This might be refined later if needed)
      
      Note that I tried to carry cookies from request sock, to establish sock,
      then timewait sockets.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Eric Salo <salo@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      33cf7c90
  28. 11 3月, 2015 2 次提交
  29. 06 3月, 2015 1 次提交
  30. 18 1月, 2015 1 次提交
    • J
      netlink: make nlmsg_end() and genlmsg_end() void · 053c095a
      Johannes Berg 提交于
      Contrary to common expectations for an "int" return, these functions
      return only a positive value -- if used correctly they cannot even
      return 0 because the message header will necessarily be in the skb.
      
      This makes the very common pattern of
      
        if (genlmsg_end(...) < 0) { ... }
      
      be a whole bunch of dead code. Many places also simply do
      
        return nlmsg_end(...);
      
      and the caller is expected to deal with it.
      
      This also commonly (at least for me) causes errors, because it is very
      common to write
      
        if (my_function(...))
          /* error condition */
      
      and if my_function() does "return nlmsg_end()" this is of course wrong.
      
      Additionally, there's not a single place in the kernel that actually
      needs the message length returned, and if anyone needs it later then
      it'll be very easy to just use skb->len there.
      
      Remove this, and make the functions void. This removes a bunch of dead
      code as described above. The patch adds lines because I did
      
      -	return nlmsg_end(...);
      +	nlmsg_end(...);
      +	return 0;
      
      I could have preserved all the function's return values by returning
      skb->len, but instead I've audited all the places calling the affected
      functions and found that none cared. A few places actually compared
      the return value with <= 0 in dump functionality, but that could just
      be changed to < 0 with no change in behaviour, so I opted for the more
      efficient version.
      
      One instance of the error I've made numerous times now is also present
      in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
      check for <0 or <=0 and thus broke out of the loop every single time.
      I've preserved this since it will (I think) have caused the messages to
      userspace to be formatted differently with just a single message for
      every SKB returned to userspace. It's possible that this isn't needed
      for the tools that actually use this, but I don't even know what they
      are so couldn't test that changing this behaviour would be acceptable.
      Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      053c095a
  31. 14 1月, 2014 1 次提交
    • N
      inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets · 70315d22
      Neal Cardwell 提交于
      Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT
      and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock
      (not just TIME_WAIT), and for such sockets the tw_substate field holds
      the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2.
      
      This brings the inet_diag state-matching code in line with the field
      it uses to populate idiag_state. This is also analogous to the info
      exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state
      and get_timewait4_sock() exports tw->tw_substate.
      
      Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state
      fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi
      state time-wait" would also return sockets in state TCP_FIN_WAIT2.
      
      This is an old bug that predates 05dbc7b5 ("tcp/dccp: remove twchain").
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Acked-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      70315d22
  32. 20 12月, 2013 1 次提交
    • D
      net: inet_diag: zero out uninitialized idiag_{src,dst} fields · b1aac815
      Daniel Borkmann 提交于
      Jakub reported while working with nlmon netlink sniffer that parts of
      the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6.
      That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3].
      
      In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab]
      memory through this. At least, in udp_dump_one(), we allocate a skb in ...
      
        rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL);
      
      ... and then pass that to inet_sk_diag_fill() that puts the whole struct
      inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0],
      r->id.idiag_dst[0] and leave the rest untouched:
      
        r->id.idiag_src[0] = inet->inet_rcv_saddr;
        r->id.idiag_dst[0] = inet->inet_daddr;
      
      struct inet_diag_msg embeds struct inet_diag_sockid that is correctly /
      fully filled out in IPv6 case, but for IPv4 not.
      
      So just zero them out by using plain memset (for this little amount of
      bytes it's probably not worth the extra check for idiag_family == AF_INET).
      
      Similarly, fix also other places where we fill that out.
      Reported-by: NJakub Zawadzki <darkjames-ws@darkjames.pl>
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b1aac815