lockdep reports:

   WARNING: possible circular locking dependency detected

   modprobe/302 is trying to acquire lock:
   0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990

   but task is already holding lock:
   000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #2 (&device->client_data_rwsem){++++}:
          down_read+0x3f/0x160
          ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
          cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
          cm_process_work+0x29/0x110 [ib_cm]
          cm_req_handler+0x10f5/0x1c00 [ib_cm]
          cm_work_handler+0x54c/0x311d [ib_cm]
          process_one_work+0x4aa/0xa30
          worker_thread+0x62/0x5b0
          kthread+0x1ca/0x1f0
          ret_from_fork+0x24/0x30

   -> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
          process_one_work+0x45f/0xa30
          worker_thread+0x62/0x5b0
          kthread+0x1ca/0x1f0
          ret_from_fork+0x24/0x30

   -> #0 ((wq_completion)ib_cm){+.+.}:
          lock_acquire+0xc8/0x1d0
          flush_workqueue+0x102/0x990
          cm_remove_one+0x30e/0x3c0 [ib_cm]
          remove_client_context+0x94/0xd0 [ib_core]
          disable_device+0x10a/0x1f0 [ib_core]
          __ib_unregister_device+0x5a/0xe0 [ib_core]
          ib_unregister_device+0x21/0x30 [ib_core]
          mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
          __mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
          mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
          mlx5_remove_device+0x144/0x150 [mlx5_core]
          mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
          mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
          __x64_sys_delete_module+0x227/0x350
          do_syscall_64+0xc3/0x6a4
          entry_SYSCALL_64_after_hwframe+0x49/0xbe

Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.

The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.

Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.

This will fence the two unregistration paths without holding any locks.

Cc: <stable@vger.kernel.org>
Fixes: 921eab11 ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.orgSigned-off-by: NDoug Ledford <dledford@redhat.com>

Added the interface in the infiniband driver that applies the rdma_dim
adaptive moderation. There is now a special function for allocating an
ib_cq that uses rdma_dim.

Performance improvement (ConnectX-5 100GbE, x86) running FIO benchmark over
NVMf between two equal end-hosts with 56 cores across a Mellanox switch
using null_blk device:

READS without DIM:
blk size | BW       | IOPS | 99th percentile latency  | 99.99th latency
512B     | 3.8GiB/s | 7.7M | 1401  usec               | 2442  usec
4k       | 7.0GiB/s | 1.8M | 4817  usec               | 6587  usec
64k      | 10.7GiB/s| 175k | 9896  usec               | 10028 usec

IO WRITES without DIM:
blk size | BW       | IOPS | 99th percentile latency  | 99.99th latency
512B     | 3.6GiB/s | 7.5M | 1434  usec               | 2474  usec
4k       | 6.3GiB/s | 1.6M | 938   usec               | 1221  usec
64k      | 10.7GiB/s| 175k | 8979  usec               | 12780 usec

IO READS with DIM:
blk size | BW       | IOPS | 99th percentile latency  | 99.99th latency
512B     | 4GiB/s   | 8.2M | 816    usec              | 889   usec
4k       | 10.1GiB/s| 2.65M| 3359   usec              | 5080  usec
64k      | 10.7GiB/s| 175k | 9896   usec              | 10028 usec

IO WRITES with DIM:
blk size | BW       | IOPS  | 99th percentile latency | 99.99th latency
512B     | 3.9GiB/s | 8.1M  | 799   usec              | 922   usec
4k       | 9.6GiB/s | 2.5M  | 717   usec              | 1004  usec
64k      | 10.7GiB/s| 176k  | 8586  usec              | 12256 usec

The rdma_dim algorithm was designed to measure the effectiveness of
moderation on the flow in a general way and thus should be appropriate
for all RDMA storage protocols.

rdma_dim is configured to be the default option based on performance
improvement seen after extensive tests.
Signed-off-by: NYamin Friedman <yaminf@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.

Only if the FW supports both modes should userspace be told the tag
matching capability is available.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb761894 ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds the ability to return the hwstats of per-port default
counters (which can also be queried through sysfs nodes).
Signed-off-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds the ability to return all available counters together with
their properties and hwstats.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In auto mode all QPs belong to one category are bind automatically to a
single counter set. Currently only "qp type" is supported.

In this mode the qp counter is set in RST2INIT modification, and when a qp
is destroyed the counter is unbound.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add an API to support set/clear per-port auto mode.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

IB_WR_REG_SIG_MR is not needed after IB_WR_REG_MR_INTEGRITY
was used.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Protect the case that a ULP tries to allocate a QP with signature
enabled flag while the LLD doesn't support this feature.
While we're here, also move integrity_en attribute from mlx5_qp to
ib_qp as a preparation for adding new integrity API to the rw-API
(that is part of ib_core module).
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN
and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This new WR will be used to perform PI (protection information) handover
using the new API. Using the new API, the user will post a single WR that
will internally perform all the needed actions to complete PI operation.
This new WR will use a memory region that was allocated as
IB_MR_TYPE_INTEGRITY and was mapped using ib_map_mr_sg_pi to perform the
registration. In the old API, in order to perform a signature handover
operation, each ULP should perform the following:
1. Map and register the data buffers.
2. Map and register the protection buffers.
3. Post a special reg WR to configure the signature handover operation
   layout.
4. Invalidate the signature memory key.
5. Invalidate protection buffers memory key.
6. Invalidate data buffers memory key.

In the new API, the mapping of both data and protection buffers is
performed using a single call to ib_map_mr_sg_pi function. Also the
registration of the buffers and the configuration of the signature
operation layout is done by a single new work request called
IB_WR_REG_MR_INTEGRITY.
This patch implements this operation for mlx5 devices that are capable to
offload data integrity generation/validation while performing the actual
buffer transfer.
This patch will not remove the old signature API that is used by the iSER
initiator and target drivers. This will be done in the future.

In the internal implementation, for each IB_WR_REG_MR_INTEGRITY work
request, we are using a single UMR operation to register both data and
protection buffers using KLM's.
Afterwards, another UMR operation will describe the strided block format.
These will be followed by 2 SET_PSV operations to set the memory/wire
domains initial signature parameters passed by the user.
In the end of the whole transaction, only the signature memory key
(the one that exposed for the RDMA operation) will be invalidated.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

PI offload (protection information) is a feature that each RDMA provider
can implement differently. Thus, introduce new device attribute to define
the maximal length of the page list for PI fast registration operation. For
example, mlx5 driver uses a single internal MR to map both data and
protection SGL's, so it's equal to max_fast_reg_page_list_len / 2.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This element will describe the needed characteristics for the signature
operation per signature enabled memory region (type IB_MR_TYPE_INTEGRITY).
Also add meta_length attribute to ib_sig_attrs structure for saving the
mapped metadata length (needed for the new API implementation).
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This function will map the previously dma mapped SG lists for PI
(protection information) and data to an appropriate memory region for
future registration.
The given MR must be allocated as IB_MR_TYPE_INTEGRITY.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This is a preparation for signature verbs API re-design. In the new
design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform
the needed mapping for data integrity operations.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This is a preparation for the signature verbs API change. This change is
needed since the MR type will define, in the upcoming patches, the need
for allocating internal resources in LLD for signature handover related
operations. It will also help to make sure that signature related
functions are called with an appropriate MR type and fail otherwise.
Also introduce new mr types IB_MR_TYPE_USER, IB_MR_TYPE_DMA and
IB_MR_TYPE_DM for correctness.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Ease the exhausted ib_verbs.h file and make the code more readable.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

All callers of destroy WQ are always success and there is no need
to check their return value, so convert destroy_wq to be void.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update the struct ib_client for all modules exporting cdevs related to the
ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now
autoloadable and discoverable by userspace over netlink instead of relying
on sysfs.

uverbs also exposes the DRIVER_ID for drivers that are able to support
driver id binding in rdma-core.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow userspace to issue a netlink query against the ib_device for
something like "uverbs" and get back the char dev name, inode major/minor,
and interface ABI information for "uverbs0".

Since we are now in netlink this can also trigger a module autoload to
make the uverbs device come into existence.

Largely this will let us replace searching and reading inside sysfs to
setup devices, and provides an alternative (using driver_id) to device
name based provider binding for things like rxe.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This enum is exposed over the sysfs file 'node_type' and over netlink via
RDMA_NLDEV_ATTR_DEV_NODE_TYPE, so declare it in the uapi headers.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Ensure that CQ is allocated and freed by IB/core and not by drivers.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Like all other destroy commands, .destroy_cq() call is not supposed
to fail. In all flows, the attempt to return earlier caused to memory
leaks.

This patch converts .destroy_cq() to do not return any errors.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This more closely follows how other subsytems work, with owner being a
member of the structure containing the function pointers.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Kernel destroy CQ flows can't fail and the returned value of
ib_destroy_cq() is not interested in those flows.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

SRP logic used device name and port index as symlink to relevant
kobject. If the IB device is renamed then the prior name will be re-used
by the next device plugged in and sysfs will panic as SRP will try to
re-use the same name.

 mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0
 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1'
 CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 Call Trace:
  dump_stack+0x5a/0x73
  sysfs_warn_dup+0x58/0x70
  sysfs_do_create_link_sd.isra.2+0xa3/0xb0
  device_add+0x33f/0x660
  srp_add_one+0x301/0x4f0 [ib_srp]
  add_client_context+0x99/0xe0 [ib_core]
  enable_device_and_get+0xd1/0x1b0 [ib_core]
  ib_register_device+0x533/0x710 [ib_core]
  ? mutex_lock+0xe/0x30
  __mlx5_ib_add+0x23/0x70 [mlx5_ib]
  mlx5_add_device+0x4e/0xd0 [mlx5_core]
  mlx5_register_interface+0x85/0xc0 [mlx5_core]
  ? 0xffffffffa0791000
  do_one_initcall+0x4b/0x1cb
  ? kmem_cache_alloc_trace+0xc6/0x1d0
  ? do_init_module+0x22/0x21f
  do_init_module+0x5a/0x21f
  load_module+0x17f2/0x1ca0
  ? m_show+0x1c0/0x1c0
  __do_sys_finit_module+0x94/0xe0
  do_syscall_64+0x48/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f157cce10d9

The module load/unload sequence was used to trigger such kernel panic:
 sudo modprobe ib_srp
 sudo modprobe -r mlx5_ib
 sudo modprobe -r mlx5_core
 sudo modprobe mlx5_core

Have SRP track the name of the core device so that it can't have a name
collision.

Fixes: d21943dd ("RDMA/core: Implement IB device rename function")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add EFA driver ID to the IOCTL interface uapi. This patch also adds
unspecified node/transport type that will be used by EFA (usnic is left
unchanged as it's already part of our ABI).
Signed-off-by: NGal Pressman <galpress@amazon.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This helper iterates over a DMA-mapped SGL and returns contiguous memory
blocks aligned to a HW supported page size.
Suggested-by: NJason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This helper iterates through the SG list to find the best page size to use
from a bitmap of HW supported page sizes. Drivers that support multiple
page sizes, but not mixed sizes in an MR can use this API.
Suggested-by: NJason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When there is active traffic through a GID, a QP/AH holds reference to
this GID entry. RoCE GID entry holds reference to its attached
netdevice. Due to this when netdevice is deleted by admin user, its
refcount is not dropped.

Therefore, while deleting RoCE GID, wait for all GID attribute's netdev
users to finish accessing netdev in rcu context.  Once all users done
accessing it, release the netdev refcount.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Integrate iw_cm_verbs data members into ib_device_ops and ib_device
structs, this is done to achieve the following:

1) Avoid memory related bugs durring error unwind
2) Make the code more cleaner
3) Reduce code duplication
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Similarly to dev/netdev/etc printk helpers, add standard printk helpers
for the RDMA subsystem.

Example output:
efa 0000:00:06.0 efa_0: Hello World!
efa_0: Hello World! (no parent device set)
(NULL ib_device): Hello World! (ibdev is NULL)

Cc: Jason Baron <jbaron@akamai.com>
Suggested-by: NJason Gunthorpe <jgg@ziepe.ca>
Suggested-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Upon further research drivers that want this should simply call the core
function vm_insert_page(). The VMA holds a reference on the page and it
will be automatically freed when the last reference drops. No need for
disassociate to sequence the cleanup.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Convert SRQ allocation from drivers to be in the IB/core
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().

We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

AH objects are allocated in atomic context and those allocations should
be done with GFP_ATOMIC.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now when ib_udata is passed to all the driver's object create/destroy APIs
the ib_udata will carry the ib_ucontext for every user command. There is
no need to also pass the ib_ucontext via the functions prototypes.

Make ib_udata the only argument psssed.
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>