Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We track the node sizes per-root, but they never vary from the values
in the superblock.  This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The io_ctl->root member was only being used to access root->fs_info.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The root is never used.  We substitute extent_root in for the
reada_find_extent call, since it's only ever used to obtain the node
size.  This call site will be changed to use fs_info in a later patch.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The root member is never used except for obtaining an fs_info pointer.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Even though a separate root is passed in, we're still operating on the
extent root.  Let's use that for the trace point.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_init_new_device only uses the root passed in via the ioctl to
start the transaction.  Nothing else that happens is related to whatever
root the user used to initiate the ioctl.  We can drop the root requirement
and just use fs_info->dev_root instead.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are many functions that are always called with the same root
argument.  Rather than passing the same root every time, we can
pass an fs_info pointer instead and have the function get the root
pointer itself.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are 11 functions that accept a root parameter and immediately
overwrite it.  We can pass those an fs_info pointer instead.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This issue was found when I tried to delete a heavily reflinked file,
when deleting such files, other transaction operation will not have a
chance to make progress, for example, start_transaction() will blocked
in wait_current_trans(root) for long time, sometimes it even triggers
soft lockups, and the time taken to delete such heavily reflinked file
is also very large, often hundreds of seconds. Using perf top, it reports
that:

PerfTop:    7416 irqs/sec  kernel:99.8%  exact:  0.0% [4000Hz cpu-clock],  (all, 4 CPUs)
---------------------------------------------------------------------------------------
    84.37%  [btrfs]             [k] __btrfs_run_delayed_refs.constprop.80
    11.02%  [kernel]            [k] delay_tsc
     0.79%  [kernel]            [k] _raw_spin_unlock_irq
     0.78%  [kernel]            [k] _raw_spin_unlock_irqrestore
     0.45%  [kernel]            [k] do_raw_spin_lock
     0.18%  [kernel]            [k] __slab_alloc
It seems __btrfs_run_delayed_refs() took most cpu time, after some debug
work, I found it's select_delayed_ref() causing this issue, for a delayed
head, in our case, it'll be full of BTRFS_DROP_DELAYED_REF nodes, but
select_delayed_ref() will firstly try to iterate node list to find
BTRFS_ADD_DELAYED_REF nodes, obviously it's a disaster in this case, and
waste much time.

To fix this issue, we introduce a new ref_add_list in struct btrfs_delayed_ref_head,
then in select_delayed_ref(), if this list is not empty, we can directly use
nodes in this list. With this patch, it just took about 10~15 seconds to
delte the same file. Now using perf top, it reports that:

PerfTop:    2734 irqs/sec  kernel:99.5%  exact:  0.0% [4000Hz cpu-clock],  (all, 4 CPUs)
----------------------------------------------------------------------------------------

    20.74%  [kernel]          [k] _raw_spin_unlock_irqrestore
    16.33%  [kernel]          [k] __slab_alloc
     5.41%  [kernel]          [k] lock_acquired
     4.42%  [kernel]          [k] lock_acquire
     4.05%  [kernel]          [k] lock_release
     3.37%  [kernel]          [k] _raw_spin_unlock_irq

For normal files, this patch also gives help, at least we do not need to
iterate whole list to found BTRFS_ADD_DELAYED_REF nodes.
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 62b99540 (btrfs: relocation: Fix leaking qgroups numbers
on data extents) only fixes the problem partly.

The previous fix is to trace all new data extents at transaction commit
time when balance finishes.

However balance is not done in a large transaction, every path
replacement can happen in its own transaction.
This makes the fix useless if transaction commits during relocation.

For example:
relocate_block_group()
|-merge_reloc_roots()
|  |- merge_reloc_root()
|     |- btrfs_start_transaction()         <- Trans X
|     |- replace_path()                    <- Cause leak
|     |- btrfs_end_transaction_throttle()  <- Trans X commits here
|     |                                       Leak not fixed
|     |
|     |- btrfs_start_transaction()         <- Trans Y
|     |- replace_path()                    <- Cause leak
|     |- btrfs_end_transaction_throttle()  <- Trans Y ends
|                                             but not committed
|-btrfs_join_transaction()                 <- Still trans Y
|-qgroup_fix()                             <- Only fixes data leak
|                                             in trans Y
|-btrfs_commit_transaction()               <- Trans Y commits

In that case, qgroup fixup can only fix data leak in trans Y, data leak
in trans X is out of fix.

So the correct fix should happen in the same transaction of
replace_path().

This patch fixes it by tracing both subtrees of tree block swap, so it
can fix the problem and ensure all leaking and fix are in the same
transaction, so no leak again.
Reported-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move account_shared_subtree() to qgroup.c and rename it to
btrfs_qgroup_trace_subtree().

Do the same thing for account_leaf_items() and rename it to
btrfs_qgroup_trace_leaf_items().

Since all these functions are only for qgroup, move them to qgroup.c and
export them is more appropriate.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Rename btrfs_qgroup_insert_dirty_extent(_nolock) to
btrfs_qgroup_trace_extent(_nolock), according to the new
reserve/trace/account naming schema.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add explaination how btrfs qgroups work.

Qgroup is split into 3 main phrases:
1) Reserve
   To ensure qgroup doesn't exceed its limit

2) Trace
   To info qgroup to trace which extent

3) Account
   Calculate qgroup number change for each traced extent.

This should save quite some time for new developers.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

And remove the bogus check for a NULL return value from kmap, which
can't happen.  While we're at it: I don't think that kmapping up to 256
will work without deadlocks on highmem machines, a better idea would
be to use vm_map_ram to map all of them into a single virtual address
range.  Incidentally that would also simplify the code a lot.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Rework the loop a little bit to use the generic bio_for_each_segment_all
helper for iterating over the bio.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the bvec offset and len members to prepare for multipage bvecs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of using bi_vcnt to calculate it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use bio_for_each_segment_all to iterate over the segments instead.
This requires a bit of reshuffling so that we only lookup up the ordered
item once inside the bio_for_each_segment_all loop.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Just use bio_for_each_segment_all to iterate over all segments.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Just use bio_for_each_segment_all to iterate over all segments.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Pass the full bio to the decompression routines and use bio iterators
to iterate over the data in the bio.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This fixes the WARN_ON on BTRFS_I(inode)->reserved_extents in
btrfs_destroy_inode and the WARN_ON on nonzero delalloc bytes on umount
with qgroups enabled.

I was able to reproduce this by setting up a small (~500kb) quota limit
and writing a file one byte at a time until I hit the limit.  The warnings
would all hit on umount.

The root cause is that we would reserve a block-sized range in both
the reservation and the quota in btrfs_check_data_free_space, but if we
encountered a problem (like e.g. EDQUOT), we would only release the single
byte in the qgroup reservation.  That caused an iotree state split, which
increased the number of outstanding extents, in turn disallowing releasing
the metadata reservation.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

At this point we will have dropped extent entries from the file, so if we fail
to insert the new hole entries then we are leaving the fs in a corrupt state
(albeit an easily fixed one).  Abort the transaciton if this happens so we can
avoid corrupting the fs.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In order to do hole punching we have a block reserve to hold the reservation we
need to drop the extents in our range.  Since we could end up dropping a lot of
extents we set rsv->failfast so we can just loop around again and drop the
remaining of the range.  Unfortunately we unconditionally fill the hole extents
in and start from the last extent we encountered, which we may or may not have
dropped.  So this can result in overlapping file extent entries, which can be
tripped over in a variety of ways, either by hitting BUG_ON(!ret) in
fill_holes() after the search, or in btrfs_set_item_key_safe() in
btrfs_drop_extent() at a later time by an unrelated task.  Fix this by only
setting drop_end to the last extent we did actually drop.  This way our holes
are filled in properly for the range that we did drop, and the rest of the range
that remains to be dropped is actually dropped.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If we process the last item in the leaf and hit an I/O error while
reading the next leaf, we return -EIO without having adjusted the
position.  Since we have emitted dirents, getdents() will return
the byte count to the user instead of the error.  Subsequent callers
will emit the last successful dirent again, and return -EIO again,
with the same result.  Callers loop forever.

Instead, if we always increment ctx->pos after emitting or skipping
the dirent, we'll be sure that we won't hit the same one again.  When
we go to process the next leaf, we won't have emitted any dirents
and the -EIO will be returned to the user properly.  We also don't
need to track if we've emitted a dirent already or if we've changed
the position yet.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 3de4586c (Btrfs: Allow subvolumes and snapshots anywhere
in the directory tree) introduced the current system of placing
snapshots in the directory tree.  It also introduced the behavior of
creating the snapshot and then creating the directory entries for it.

We've kept this code around for compatibility reasons, but it turns
out that no file systems with the old tree_root based snapshots can
be mounted on newer (>= 2009) kernels anyway.  About a month after the
above commit, commit 2a7108ad (Btrfs: rev the disk format for the
inode compat and csum selection changes) landed, changing the superblock
magic number.

As a result, we know that we'll never encounter tree_root-based dirents
or have to deal with skipping our own snapshot dirents.  Since that
also means that we're now only iterating over DIR_INDEX items, which only
contain one directory entry per leaf item, we don't need to loop over
the leaf item contents anymore either.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If zlib_inflateInit2 fails, the input page is never unmapped.
Add a call to kunmap when it fails.
Signed-off-by: NNick Terrell <nickrterrell@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The balance status item contains currently known filter values, but the
stripes filter was unintentionally not among them. This would mean, that
interrupted and automatically restarted balance does not apply the
stripe filters.

Fixes: dee32d0a
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NDavid Sterba <dsterba@suse.com>

'btrfs_iget()' can not return NULL, so this test can be removed.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

csum member of struct btrfs_super_block has array type of u8. It makes
sense that function btrfs_csum_final should be also declared to accept
u8 *. I changed the declaration of method void btrfs_csum_final(u32 crc,
char *result); to void btrfs_csum_final(u32 crc, u8 *result);
Signed-off-by: NDomagoj Tršan <domagoj.trsan@gmail.com>
[ changed cast to u8 at several call sites ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If we have

|0--hole--4095||4096--preallocate--12287|

instead of using preallocated space, a 8K direct write will just
create a new 8K extent and it'll end up with

|0--new extent--8191||8192--preallocate--12287|

It's because we find a hole em and then go to create a new 8K
extent directly without adjusting @len.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NChris Mason <clm@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There is no need to call kfree() if memdup_user() fails, as no memory
was allocated and the error in the error-valued pointer should be returned.
Signed-off-by: NShailendra Verma <shailendra.v@samsung.com>
[ edit subject ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Using copy_extent_buffer is suitable for copying betwenn buffers from an
arbitrary offset and deals with page boundaries. This is not necessary
when doing a full extent_buffer-to-extent_buffer copy. We can utilize
the copy_page helper as well.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The only memset we do is to 0, so sink the parameter to the function and
simplify all calls. Rename the function to reflect the behaviour.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The copy_page is usually optimized and can be faster than memcpy.
Signed-off-by: NDavid Sterba <dsterba@suse.com>