- 09 8月, 2016 11 次提交
-
-
由 Michael Ellerman 提交于
The recent commit 63a72284 ("powerpc/pci: Assign fixed PHB number based on device-tree properties"), added code to read a 64-bit property from the device tree, and if not found read a 32-bit property (reg). There was a bug in the 32-bit case, on big endian machines, due to the use of the 64-bit value to read the 32-bit property. The cast of &prop means we end up writing to the high 32-bit of prop, leaving the low 32-bits containing whatever junk was on the stack. If that junk value was non-zero, and < MAX_PHBS, we would end up using it as the PHB id. This results in users seeing what appear to be random PHB ids. Fix it by reading into a u32 property and then assigning that to the u64 value, letting the CPU do the correct conversions for us. Fixes: 63a72284 ("powerpc/pci: Assign fixed PHB number based on device-tree properties") Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Guilherme G. Piccoli 提交于
This is a very minor/trivial fix for the output of PCI address on EEH logs. The PCI address on "OF node" field currently is using ":" as a separator for the function, but the usual separator is ".". This patch changes the separator to dot, so the PCI address is printed as usual. Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Guenter Roeck 提交于
Some powerpc builds fail with the following buld error. In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0, from arch/powerpc/kernel/vdso.c:28: arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr': arch/powerpc/include/asm/cputhreads.h:101:2: error: implicit declaration of function 'cpu_has_feature' Fixes: b92a226e ("powerpc: Move cpu_has_feature() to a separate file") Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Alastair D'Silva 提交于
This patch fixes the following warning: arch/powerpc/platforms/pseries/hotplug-memory.c:323:29: error: 'lmb_to_memblock' defined but not used [-Werror=unused-function] static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb) ^~~~~~~~~~~~~~~ The only consumer of this function is 'dlpar_remove_lmb', which is enabled with CONFIG_MEMORY_HOTREMOVE, so move it into the same ifdef block. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Mahesh Salgaonkar 提交于
The current implementation of MCE early handling modifies CR0/1 registers without saving its old values. Fix this by moving early check for powersaving mode to machine_check_handle_early(). The power architecture 2.06 or later allows the possibility of getting machine check while in nap/sleep/winkle. The last bit of HSPRG0 is set to 1, if thread is woken up from winkle. Hence, clear the last bit of HSPRG0 (r13) before MCE handler starts using it as paca pointer. Also, the current code always puts the thread into nap state irrespective of whatever idle state it woke up from. Fix that by looking at paca->thread_idle_state and put the thread back into same state where it came from. Fixes: 1c51089f ("powerpc/book3s: Return from interrupt if coming from evil context.") Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Mahesh Salgaonkar 提交于
Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h so that MCE handler changes in subsequent patch can use it. No functionality change. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Mahesh Salgaonkar 提交于
The function pnv_restore_hyp_resource() loads the TOC into r2 from the invalid PACA pointer before fixing r13 value. This do not affect POWER ISA 3.0 but it does have an impact on POWER ISA 2.07 or less leading CPU to get stuck forever. login: [ 471.830433] Processor 120 is stuck. This can be easily reproducible using following steps: - Turn off SMT $ ppc64_cpu --smt=off - offline/online any online cpu (Thread 0 of any core which is online) $ echo 0 > /sys/devices/system/cpu/cpu<num>/online $ echo 1 > /sys/devices/system/cpu/cpu<num>/online For POWER ISA 2.07 or less, the last bit of HSPRG0 is set indicating that thread is waking up from winkle. Hence, the last bit of HSPRG0(r13) needs to be clear before accessing it as PACA to avoid loading invalid values from invalid PACA pointer. Fix this by loading TOC after r13 register is corrected. Fixes: bcef83a0 ("powerpc/powernv: Add platform support for stop instruction") Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Alexey Kardashevskiy 提交于
Commit fd141d1a ("powerpc/powernv/pci: Rework accessing the TCE invalidate register") broke TCE invalidation on IODA2/PHB3 for real mode. This makes invalidate work again. Fixes: fd141d1a ("powerpc/powernv/pci: Rework accessing the TCE invalidate register") Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Dan Carpenter 提交于
We should return -ENOMEM if alloc_spu_gang() fails. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
This sets the type of the interrupt appropriately. We set it as follow: - If not mapped from the device-tree, we use edge. This is the case of the virtual interrupts and PCI MSIs for example. - If mapped from the device-tree and #interrupt-cells is 2 (PAPR compliant), we use the second cell to set the appropriate type - If mapped from the device-tree and #interrupt-cells is 1 (current OPAL on P8 does that), we assume level sensitive since those are typically going to be the PSI LSIs which are level sensitive. Additionally, we mark the interrupts requested via the opal_interrupts property all level. This is a bit fishy but the best we can do until we fix OPAL to properly expose them with a complete descriptor. It is also correct for the current HW anyway as OPAL interrupts are currently PCI error and PSI interrupts which are level. Finally now that edge interrupts are properly identified, we can enable CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if they occur while masked, which some drivers rely upon. This fixes issues with lost interrupts on some Mellanox adapters. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
This patch utilises the GENERIC_CPU_AUTOPROBE infrastructure to automatically load the crc32c-vpmsum module if the CPU supports it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 8月, 2016 1 次提交
-
-
由 Darren Stevens 提交于
Commit 817820b0 ("powerpc/iommu: Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask) adds a check of coherent_dma_mask for dma allocations. Unfortunately current PASemi code does not set this value for the DMA engine, which ends up with the default value of 0xffffffff, the result is on a PASemi system with >2Gb ram and iommu enabled the the onboard ethernet stops working due to an inability to allocate memory. Add an initialisation to pci_dma_dev_setup_pasemi(). Signed-off-by: NDarren Stevens <darren@stevens-zone.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 05 8月, 2016 14 次提交
-
-
由 Rich Felker 提交于
Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
This defconfig is intended not to be specific to a particular board; it enables drivers for all currently-supported hardware, and should be updated to include additional drivers as they are added. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
Enable common clk framework for DT-based boards and disable code that depends on the legacy sh clk framework when common clk is enabled. Once legacy drivers are converted over, the old code can be removed entirely. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Markus Elfring 提交于
The mempool_destroy() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
Support is hooked up via a cpu start method specified in the device tree, and also depends on DT nodes that describe the interfaces for performing IPI and identifying which cpu execution is taking place on. The currently used method is a form of spin table, where secondary cpus are unblocked by writing to a special address. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
The SH2 version of entry.S uses global variables, which need to be cpu-local in order to work with SMP. For ease of access from asm, simply use arrays indexed by cpu number, and require the availability of an address (mmio register or properly setup per-cpu memory) from which the current cpu's index can be read. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
The version of futex.h in asm-generic should really be adapted to do the same thing so that this hideous code does not have to be duplicated per-arch. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
The J-Core cpu has, as an ISA extension, an atomic compare-and-swap instruction cas.l which applications need to use (instead the imask or gusa atomic models, which are fundamentally limited to UP) for synchronization in order to be compatible with SMP systems. Provide a hwcap flag so that it's possible to do runtime selection and support both. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Rich Felker 提交于
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the changes to add J2 support build on existing SH-2 support. However, J2 does not duplicate the memory-mapped SH-2 features like the cache interface. Instead, the cache interfaces is described in the device tree, and new code is added to be able to access the flat device tree at early boot before it is unflattened. Support is also added for receiving interrupts on trap numbers in the range 16 to 31, since the J-Core aic1 interrupt controller generates these traps. This range was unused but nominally for hardware exceptions on SH-2, and a few values in this range were used for exceptions on SH-2A, but SH-2A has its own version of the relevant code. No individual cpu subtypes are added for J2 since the intent moving forward is to represent SoCs with device tree rather than as hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item exists only to fit into the existing cpu selection mechanism until it is overhauled. Signed-off-by: NRich Felker <dalias@libc.org>
-
由 Dan Carpenter 提交于
We should set the error code here rather than incorrectly returning 0. Otherwise static checkers complain. Link: http://lkml.kernel.org/r/20160804053525.GM775@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Hogan 提交于
The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect constraints for the return value which under certain circumstances can allow an address unit register to be used as the first operand of a CMP instruction. This isn't a valid instruction however as the encodings only allow a data unit to be specified. This would result in an assembler error like the following: Error: failed to assemble instruction: "CMP A0.2,D0Ar6" Fix by changing the constraint from "=&da" (assigned, early clobbered, data or address unit register) to "=&d" (data unit register only). The constraint for the second operand, "bd" (an op2 register where op1 is a data unit register and the instruction supports O2R) is already correct assuming the first operand is a data unit register. Other cases of CMP in inline asm have had their constraints checked, and appear to all be fine. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.9.x-
-
- 04 8月, 2016 14 次提交
-
-
由 Jason Baron 提交于
The jump table can reference text found in an __exit section. Thus, instead of discarding it at build time, include EXIT_TEXT as part of __init and it will be released when the system boots. Link: http://lkml.kernel.org/r/60284113bb759121e8ae3e99af1535647e52123f.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Metcalf 提交于
Previously, all the __exit sections were just dropped by the link phase. However, if there are static_key (jump label) constructs in __exit sections that are not modules, the link fails with the message: `.exit.text' referenced in section `__jump_table' of xxx.o: defined in discarded section `.exit.text' of xxx.o Support this usage by keeping the .exit.text sections in the final image if JUMP_LABEL is defined, then discarding them once initialization is complete. Link: http://lkml.kernel.org/r/bfd7c107c610c30e992868ebfe2a5d796a097464.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com> Signed-off-by: NChris Metcalf <cmetcalf@mellanox.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Baron 提交于
The jump table can reference text found in an __exit section. Thus, instead of discarding it at build/link time, include EXIT_TEXT as part of __init and release it at system boot time. Without this patch the link fails with: `.exit.text' referenced in section `__jump_table' of xxx.o: defined in discarded section `.exit.text' of xxx.o Link: http://lkml.kernel.org/r/d822da427ab07a02a394602eca687104ff682f83.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Baron 提交于
The stringify_in_c() macro may not be included. Make the dependency explicit. Link: http://lkml.kernel.org/r/564720c5328edd53c9d56db325be7215440eec3e.1467837322.git.jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NRobin Murphy <robin.murphy@arm.com> Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masahiro Yamada 提交于
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NKees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve Capper 提交于
set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before writing the entry to the table. This can cause problems with the copy-on-write logic in hugetlb_cow: *) hugetlb_cow(.) called to handle a write fault on read only pte, *) Before the copy-on-write updates the new page table a call is made to pte_same(huge_ptep_get(ptep), pte)), to check for a race, *) Because set_pte_at(.) changed the pte, *ptep != pte, and the hugetlb_cow(.) code erroneously assumes that it lost the race, *) The new page is subsequently freed without being used. On arm64 this problem only becomes apparent when we apply: 67961f9d mm/hugetlb: fix huge page reserve accounting for private mappings When one runs the libhugetlbfs test suite, there are allocation errors and hugetlbfs pages become erroneously locked in memory as reserved. (There is a high HugePages_Rsvd: count). In this patch we introduce pte_same which ignores the PTE_RDONLY bit, allowing for the libhugetlbfs test suite to pass as expected and without leaking any reserved HugeTLB pages. Reported-by: NHuang Shijie <shijie.huang@arm.com> Signed-off-by: NSteve Capper <steve.capper@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Bandan Das 提交于
Commit 4b855078 ("KVM: nVMX: Don't advertise single context invalidation for invept") removed advertising single context invalidation since the spec does not mandate it. However, some hypervisors (such as ESX) require it to be present before willing to use ept in a nested environment. Advertise it and fallback to the global case. Signed-off-by: NBandan Das <bsd@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Bandan Das 提交于
Nested vpid is already supported and both single/global modes are advertised to the guest Signed-off-by: NBandan Das <bsd@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
BUG: unable to handle kernel NULL pointer dereference at 000000000000008c IP: [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] PGD 0 Oops: 0000 [#1] SMP Call Trace: kvm_arch_vcpu_load+0x86/0x260 [kvm] vcpu_load+0x46/0x60 [kvm] kvm_vcpu_ioctl+0x79/0x7c0 [kvm] ? __lock_is_held+0x54/0x70 do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 SyS_ioctl+0x79/0x90 do_syscall_64+0x7c/0x1e0 entry_SYSCALL64_slow_path+0x25/0x25 RIP [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] RSP <ffff8800db1f3d70> CR2: 000000000000008c ---[ end trace a55fb79d2b3b4ee8 ]--- This can be reproduced steadily by kernel_irqchip=off. We should not access preemption timer stuff if lapic is emulated in userspace. This patch fix it by avoiding access preemption timer stuff when kernel_irqchip=off. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The new simplified __pvclock_read_cycles does the same computation as vread_pvclock, except that (because it takes the pvclock_vcpu_time_info pointer) it has to be moved inside the loop. Since the loop is expected to never roll, this makes no difference. Acked-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The version field in struct pvclock_vcpu_time_info basically implements a seqcount. Wrap it with the usual read_begin and read_retry functions, and use these APIs instead of peppering the code with smp_rmb()s. While at it, change it to the more pedantically correct virt_rmb(). With this change, __pvclock_read_cycles can be simplified noticeably. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Michael Ellerman 提交于
We want to initialise register_process_table() before ppc_md is setup, so that it can be called as part of MMU init (at least on Radix ATM). That no longer works because probe_machine() requires that ppc_md be empty before it's called, and we now do probe_machine() much later. So make register_process_table a global for now. It will probably move into a mmu_radix_ops struct at some point in the future. This was broken by me when applying commit 7025776e "powerpc/mm: Move hash table ops to a separate structure" due to conflicts with other patches. Fixes: 7025776e ("powerpc/mm: Move hash table ops to a separate structure") Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Madhavan Srinivasan 提交于
These have been changed in the hardware, update Linux's version. Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-